McAfee-Secured Website

Exam Bundle

Exam Code: 350-501

Exam Name Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR)

Certification Provider: Cisco

Corresponding Certifications: CCIE Service Provider , CCNP Service Provider

Cisco 350-501 Bundle $28.79

100% Cisco 350-501 Guaranteed Success With Testking Training Materials

Get Real 350-501 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    350-501 Questions & Answers

    528 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 350-501 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 350-501 Video Course

    350-501 Video Course

    253 Video Lectures

    350-501 Video Course is developed by Cisco Professionals to help you pass the 350-501 exam.

    Description

    This course will improve your knowledge and skills required to pass Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) exam.
  • Study Guide

    350-501 Study Guide

    1160 PDF Pages

    Developed by industry experts, this 1160-page guide spells out in painstaking detail all of the information you need to ace 350-501 exam.

Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) (350-501) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $189.97
Bundle Price: $161.18

Purchase Individually

  • Questions & Answers

    Questions & Answers

    528 Questions

    $124.99
  • 350-501 Video Course

    Video Course

    253 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1160 PDF Pages

    $24.99

Cisco 350-501 Practice Test 62

Question 610

For a converged broadband aggregation team, operators addressed: A provider bridges a customer pseudowire into a service where the incoming access VLAN must be rewritten, but the PE maps the customer tag to an unrelated EVC. What is the strongest acceptance evidence?

  1. A lab traffic test passes with consistent pseudowire labels and expected Ethernet frame format.
  2. Tagged frame tests map each subscriber VLAN to the intended service and restore the expected egress tag.
  3. Root-to-leaf tests pass and direct leaf-to-leaf attempts are blocked.
  4. A test burst within authorized limits traverses with predictable delay and without unnecessary drops.

Explanation

Correct Answer

B:

Tagged frame tests map each subscriber VLAN to the intended service and restore the expected egress tag. This confirms the approved response: Apply the approved ingress and egress VLAN translation and encapsulation rewrite on the correct attachment circuit. It is relevant because: VLAN tag manipulation at the PE defines the customer-to-provider service mapping and can change tenant isolation.

Incorrect Answers

A:

A lab traffic test passes with consistent pseudowire labels and expected Ethernet frame format. This would validate ANOTHER scenario: A layer-2 pseudowire on two PEs is signaled Up but customer frames are dropped because local and remote pseudowire encapsulation modes differ. The specific correction here is: Apply the approved ingress and egress VLAN translation and encapsulation rewrite on the correct attachment circuit.

C:

Root-to-leaf tests pass and direct leaf-to-leaf attempts are blocked. This would validate ANOTHER scenario: A carrier sells an E-Tree service with root and leaf sites but accidentally permits leaf-to-leaf bridging, exposing isolated branch traffic. The specific correction here is: Apply the approved ingress and egress VLAN translation and encapsulation rewrite on the correct attachment circuit.

D:

A test burst within authorized limits traverses with predictable delay and without unnecessary drops. This would validate ANOTHER scenario: An access policy applies a strict policer to interactive traffic and expects it to smooth bursts like a shaper, resulting in avoidable packet discards. The specific correction here is: Apply the approved ingress and egress VLAN translation and encapsulation rewrite on the correct attachment circuit.

Question 611

Which network protocol or forwarding behavior explains the following issue: A provider bridges a customer pseudowire into a service where the incoming access VLAN must be rewritten, but the PE maps the customer tag to an unrelated EVC.

  1. E-Access targets Ethernet wholesale access connectivity with defined service demarcation and operator interfaces.
  2. IEEE 802.1ah separates backbone provider MAC addressing from customer MAC addressing through encapsulation.
  3. VLAN tag manipulation at the PE defines the customer-to-provider service mapping and can change tenant isolation.
  4. EVPN Type-5 routes distribute IP prefix reachability and require appropriate service import policy.

Explanation

Correct Answer

C:

VLAN tag manipulation at the PE defines the customer-to-provider service mapping and can change tenant isolation. This explains the investigated issue: A provider bridges a customer pseudowire into a service where the incoming access VLAN must be rewritten, but the PE maps the customer tag to an unrelated EVC. The approved corrective response is: Apply the approved ingress and egress VLAN translation and encapsulation rewrite on the correct attachment circuit.

Incorrect Answers

A:

E-Access targets Ethernet wholesale access connectivity with defined service demarcation and operator interfaces. That explains a DIFFERENT scenario: An E-Access wholesale demarcation connects one retail provider UNI to a distant operator UNI, but the order is provisioned as an open multipoint LAN across all sites. The mechanism to prioritize for this question is: VLAN tag manipulation at the PE defines the customer-to-provider service mapping and can change tenant isolation.

B:

IEEE 802.1ah separates backbone provider MAC addressing from customer MAC addressing through encapsulation. That explains a DIFFERENT scenario: A carrier backbone applies provider bridging with 802.1ah MAC-in-MAC but its edge fails to strip the outer backbone header, so customer switches receive unknown backbone addresses. The mechanism to prioritize for this question is: VLAN tag manipulation at the PE defines the customer-to-provider service mapping and can change tenant isolation.

D:

EVPN Type-5 routes distribute IP prefix reachability and require appropriate service import policy. That explains a DIFFERENT scenario: A provider imports an EVPN Type-5 IP prefix into the wrong VRF because a route-target policy matches a customer label instead of the service's approved tenant RT. The mechanism to prioritize for this question is: VLAN tag manipulation at the PE defines the customer-to-provider service mapping and can change tenant isolation.

Question 612

A core network change board wants to avoid: A provider bridges a customer pseudowire into a service where the incoming access VLAN must be rewritten, but the PE maps the customer tag to an unrelated EVC. Which ongoing safeguard fits best?

  1. Inspect header encapsulation at both service demarcations after provider bridge changes.
  2. Maintain service-specific CFM endpoint inventories and alarm tests.
  3. Review route leaking and label transport boundaries for every wholesale peer.
  4. Validate VLAN rewrite rules bidirectionally with representative tags.

Explanation

Correct Answer

D:

Validate VLAN rewrite rules bidirectionally with representative tags. This helps prevent recurrence of the issue: A provider bridges a customer pseudowire into a service where the incoming access VLAN must be rewritten, but the PE maps the customer tag to an unrelated EVC. Acceptance evidence should be: Tagged frame tests map each subscriber VLAN to the intended service and restore the expected egress tag.

Incorrect Answers

A:

Inspect header encapsulation at both service demarcations after provider bridge changes. That is a sensible control for ANOTHER scenario: A carrier backbone applies provider bridging with 802.1ah MAC-in-MAC but its edge fails to strip the outer backbone header, so customer switches receive unknown backbone addresses. It is less targeted to this issue than: Validate VLAN rewrite rules bidirectionally with representative tags.

B:

Maintain service-specific CFM endpoint inventories and alarm tests. That is a sensible control for ANOTHER scenario: An Ethernet OAM continuity check reports an unexpected remote maintenance endpoint and operators trust the wrong circuit when troubleshooting an outage. It is less targeted to this issue than: Validate VLAN rewrite rules bidirectionally with representative tags.

C:

Review route leaking and label transport boundaries for every wholesale peer. That is a sensible control for ANOTHER scenario: A wholesale carrier provides carrier-supporting-carrier transport, but a subcontractor PE advertises customer routes into the infrastructure global table rather than using labeled backbone service separation. It is less targeted to this issue than: Validate VLAN rewrite rules bidirectionally with representative tags.

Question 613

A carrier service activation check discovers: A CE-PE BGP session successfully exchanges routes but a newly provisioned customer VRF has no route targets and none of its routes propagate to distant PEs. Which action best restores the intended behavior?

  1. Enable supported IPv6 VRF address family and VPNv6 route exchange with matching route targets.
  2. Add explicitly authorized VPN RT export/import policy and ensure the MP-BGP VPN family is active between PEs.
  3. Restore per-customer VRFs and correct route-target import/export for the intended L3VPN service.
  4. Classify backup traffic into an appropriate weighted queue and limit the priority queue to approved delay-sensitive flows.

Explanation

Correct Answer

B:

Add explicitly authorized VPN RT export/import policy and ensure the MP-BGP VPN family is active between PEs. This directly addresses the fictional service-provider network case: A CE-PE BGP session successfully exchanges routes but a newly provisioned customer VRF has no route targets and none of its routes propagate to distant PEs. The technical mechanism is: PE-CE routing and provider MP-BGP VPN distribution are distinct control-plane stages in an L3VPN service. Verify success by: A remote VRF installs the approved CE prefix and unrelated customer VRFs show no route change.

Incorrect Answers

A:

Enable supported IPv6 VRF address family and VPNv6 route exchange with matching route targets. This would respond to a DIFFERENT fictional service-provider network issue: An enterprise customer is promised IPv6 VPN reachability but the PE provisions only VPNv4 MP-BGP and v4 VRF interfaces. It does not directly address the current situation: A CE-PE BGP session successfully exchanges routes but a newly provisioned customer VRF has no route targets and none of its routes propagate to distant PEs.

C:

Restore per-customer VRFs and correct route-target import/export for the intended L3VPN service. This would respond to a DIFFERENT fictional service-provider network issue: Two customers use the same 10.10.0.0/16 prefix but a PE leaks VPNv4 routes into its global table, incorrectly merging their routing contexts. It does not directly address the current situation: A CE-PE BGP session successfully exchanges routes but a newly provisioned customer VRF has no route targets and none of its routes propagate to distant PEs.

D:

Classify backup traffic into an appropriate weighted queue and limit the priority queue to approved delay-sensitive flows. This would respond to a DIFFERENT fictional service-provider network issue: A high-volume backup class is placed in the same strict-priority queue as voice, starving the provider's control and ordinary traffic. It does not directly address the current situation: A CE-PE BGP session successfully exchanges routes but a newly provisioned customer VRF has no route targets and none of its routes propagate to distant PEs.

Question 614

Following a supported configuration correction, the original issue was: A CE-PE BGP session successfully exchanges routes but a newly provisioned customer VRF has no route targets and none of its routes propagate to distant PEs. Which observation verifies success?

  1. A packet trace to the moved prefix follows the new PE while the retired next hop disappears from service routes.
  2. Customers reach the approved DNS endpoint but cross-customer reachability tests fail.
  3. A remote VRF installs the approved CE prefix and unrelated customer VRFs show no route change.
  4. During deliberate congestion, both sites show the intended class distribution and measurable queuing behavior.

Explanation

Correct Answer

C:

A remote VRF installs the approved CE prefix and unrelated customer VRFs show no route change. This confirms the approved response: Add explicitly authorized VPN RT export/import policy and ensure the MP-BGP VPN family is active between PEs. It is relevant because: PE-CE routing and provider MP-BGP VPN distribution are distinct control-plane stages in an L3VPN service.

Incorrect Answers

A:

A packet trace to the moved prefix follows the new PE while the retired next hop disappears from service routes. This would validate ANOTHER scenario: A carrier moves an enterprise's primary VPN site but retains an old CE static route in the remote VRF, steering packets to the retired PE. The specific correction here is: Add explicitly authorized VPN RT export/import policy and ensure the MP-BGP VPN family is active between PEs.

B:

Customers reach the approved DNS endpoint but cross-customer reachability tests fail. This would validate ANOTHER scenario: A shared-services DNS VRF must serve three customer VRFs, but engineers import full customer route tables into the DNS VRF and unintentionally create broad extranet connectivity. The specific correction here is: Add explicitly authorized VPN RT export/import policy and ensure the MP-BGP VPN family is active between PEs.

D:

During deliberate congestion, both sites show the intended class distribution and measurable queuing behavior. This would validate ANOTHER scenario: Two sites use identical DSCP values but only one interface applies a queue scheduler, and the team assumes packet marking alone guarantees bandwidth on both links. The specific correction here is: Add explicitly authorized VPN RT export/import policy and ensure the MP-BGP VPN family is active between PEs.

Question 615

At an inter-AS service aggregation carrier, an engineer examines: A CE-PE BGP session successfully exchanges routes but a newly provisioned customer VRF has no route targets and none of its routes propagate to distant PEs. Which technical principle is most applicable?

  1. MPLS VPN service labels identify the egress service context separately from outer backbone transport labels.
  2. L3VPN path choice is influenced by per-service routing policy in addition to reachability and transport labels.
  3. CSC designs carry another provider's traffic through a backbone without exposing all downstream customer routes into the carrier core.
  4. PE-CE routing and provider MP-BGP VPN distribution are distinct control-plane stages in an L3VPN service.

Explanation

Correct Answer

D:

PE-CE routing and provider MP-BGP VPN distribution are distinct control-plane stages in an L3VPN service. This explains the investigated issue: A CE-PE BGP session successfully exchanges routes but a newly provisioned customer VRF has no route targets and none of its routes propagate to distant PEs. The approved corrective response is: Add explicitly authorized VPN RT export/import policy and ensure the MP-BGP VPN family is active between PEs.

Incorrect Answers

A:

MPLS VPN service labels identify the egress service context separately from outer backbone transport labels. That explains a DIFFERENT scenario: An L3VPN PE advertises a VPNv4 route but the egress fails to associate the received VPN label with the correct customer VRF, causing the route to appear in the wrong context. The mechanism to prioritize for this question is: PE-CE routing and provider MP-BGP VPN distribution are distinct control-plane stages in an L3VPN service.

B:

L3VPN path choice is influenced by per-service routing policy in addition to reachability and transport labels. That explains a DIFFERENT scenario: A customer VRF needs dual-homed connectivity yet the provider sets local preference to favor the backup for all customer routes, causing avoidable transit cost. The mechanism to prioritize for this question is: PE-CE routing and provider MP-BGP VPN distribution are distinct control-plane stages in an L3VPN service.

C:

CSC designs carry another provider's traffic through a backbone without exposing all downstream customer routes into the carrier core. That explains a DIFFERENT scenario: A wholesale carrier provides carrier-supporting-carrier transport, but a subcontractor PE advertises customer routes into the infrastructure global table rather than using labeled backbone service separation. The mechanism to prioritize for this question is: PE-CE routing and provider MP-BGP VPN distribution are distinct control-plane stages in an L3VPN service.

Question 616

For an inter-AS service aggregation carrier, the change record describes: A CE-PE BGP session successfully exchanges routes but a newly provisioned customer VRF has no route targets and none of its routes propagate to distant PEs. What preventive validation should be standard?

  1. Validate CE route reception, VPN export and remote import as three separate checks.
  2. Include forward and return path checks in shared-services acceptance.
  3. Audit bidirectional prefix scope and service ACLs on extranet changes.
  4. Review RPL ownership and ring state during ring expansion.

Explanation

Correct Answer

A:

Validate CE route reception, VPN export and remote import as three separate checks. This helps prevent recurrence of the issue: A CE-PE BGP session successfully exchanges routes but a newly provisioned customer VRF has no route targets and none of its routes propagate to distant PEs. Acceptance evidence should be: A remote VRF installs the approved CE prefix and unrelated customer VRFs show no route change.

Incorrect Answers

B:

Include forward and return path checks in shared-services acceptance. That is a sensible control for ANOTHER scenario: A remote customer site can send packets toward the Internet exit in a shared services VRF but the exit has no return route for the private customer prefix. It is less targeted to this issue than: Validate CE route reception, VPN export and remote import as three separate checks.

C:

Audit bidirectional prefix scope and service ACLs on extranet changes. That is a sensible control for ANOTHER scenario: A shared-services DNS VRF must serve three customer VRFs, but engineers import full customer route tables into the DNS VRF and unintentionally create broad extranet connectivity. It is less targeted to this issue than: Validate CE route reception, VPN export and remote import as three separate checks.

D:

Review RPL ownership and ring state during ring expansion. That is a sensible control for ANOTHER scenario: A G.8032 Ethernet ring sees a broadcast storm after a ring protection link is accidentally forwarding on both sides of a stable ring. It is less targeted to this issue than: Validate CE route reception, VPN export and remote import as three separate checks.

Question 617

For a regional service-provider operations center, the failure is: Two multicast access routers each act as designated router for the same LAN after a timer mismatch and receivers see repeated source register behavior. Which authorized correction best addresses it?

  1. Inspect and configure MLD listener state for IPv6 independently from IPv4 IGMP.
  2. Correct multicast reverse-path reachability or the supported explicit RPF override consistent with topology.
  3. Restore consistent PIM interface settings and designated-router election visibility on the access segment.
  4. Restore the intended ERP blocking and ring protection state with verified RPL ownership.

Explanation

Correct Answer

C:

Restore consistent PIM interface settings and designated-router election visibility on the access segment. This directly addresses the fictional service-provider network case: Two multicast access routers each act as designated router for the same LAN after a timer mismatch and receivers see repeated source register behavior. The technical mechanism is: PIM designated-router election affects which router performs certain source and join responsibilities on a shared LAN. Verify success by: One intended DR is elected and the shared LAN emits the expected controlled PIM behavior.

Incorrect Answers

A:

Inspect and configure MLD listener state for IPv6 independently from IPv4 IGMP. This would respond to a DIFFERENT fictional service-provider network issue: An IPv6 multicast receiver joins an MLDv2 group, but the adjacent router polls only IGMP state and reports no listeners. It does not directly address the current situation: Two multicast access routers each act as designated router for the same LAN after a timer mismatch and receivers see repeated source register behavior.

B:

Correct multicast reverse-path reachability or the supported explicit RPF override consistent with topology. This would respond to a DIFFERENT fictional service-provider network issue: A PIM multicast route shows an incoming interface inconsistent with the unicast route back to the source, dropping traffic as an RPF failure. It does not directly address the current situation: Two multicast access routers each act as designated router for the same LAN after a timer mismatch and receivers see repeated source register behavior.

D:

Restore the intended ERP blocking and ring protection state with verified RPL ownership. This would respond to a DIFFERENT fictional service-provider network issue: A G.8032 Ethernet ring sees a broadcast storm after a ring protection link is accidentally forwarding on both sides of a stable ring. It does not directly address the current situation: Two multicast access routers each act as designated router for the same LAN after a timer mismatch and receivers see repeated source register behavior.

Question 618

After fixing the following network problem, what should the team verify: Two multicast access routers each act as designated router for the same LAN after a timer mismatch and receivers see repeated source register behavior.

  1. PIM neighbor and multicast route views show RP reachability and correct shared-tree traffic delivery.
  2. An IPv6 test host produces the expected MLDv2 source/group membership and receives the authorized stream.
  3. Prefix readback appears only in the two participating VRFs and all other VRFs remain isolated.
  4. One intended DR is elected and the shared LAN emits the expected controlled PIM behavior.

Explanation

Correct Answer

D:

One intended DR is elected and the shared LAN emits the expected controlled PIM behavior. This confirms the approved response: Restore consistent PIM interface settings and designated-router election visibility on the access segment. It is relevant because: PIM designated-router election affects which router performs certain source and join responsibilities on a shared LAN.

Incorrect Answers

A:

PIM neighbor and multicast route views show RP reachability and correct shared-tree traffic delivery. This would validate ANOTHER scenario: A PIM-SM receiver router has no route to the configured rendezvous point, and (*,G) state never forms for ASM traffic. The specific correction here is: Restore consistent PIM interface settings and designated-router election visibility on the access segment.

B:

An IPv6 test host produces the expected MLDv2 source/group membership and receives the authorized stream. This would validate ANOTHER scenario: An IPv6 multicast receiver joins an MLDv2 group, but the adjacent router polls only IGMP state and reports no listeners. The specific correction here is: Restore consistent PIM interface settings and designated-router election visibility on the access segment.

C:

Prefix readback appears only in the two participating VRFs and all other VRFs remain isolated. This would validate ANOTHER scenario: A provider advertises the same extranet shared-services prefix into two tenants, but a third tenant unexpectedly imports it because a generic RT is reused globally. The specific correction here is: Restore consistent PIM interface settings and designated-router election visibility on the access segment.

Question 619

A carrier root-cause review considers: Two multicast access routers each act as designated router for the same LAN after a timer mismatch and receivers see repeated source register behavior. What underlying mechanism explains this?

  1. PIM designated-router election affects which router performs certain source and join responsibilities on a shared LAN.
  2. Source-Specific Multicast relies on explicit source/group membership signaling rather than any-source group joins.
  3. IGMP controls IPv4 multicast listener membership, while MLD performs the analogous role for IPv6.
  4. L3VPN path choice is influenced by per-service routing policy in addition to reachability and transport labels.

Explanation

Correct Answer

A:

PIM designated-router election affects which router performs certain source and join responsibilities on a shared LAN. This explains the investigated issue: Two multicast access routers each act as designated router for the same LAN after a timer mismatch and receivers see repeated source register behavior. The approved corrective response is: Restore consistent PIM interface settings and designated-router election visibility on the access segment.

Incorrect Answers

B:

Source-Specific Multicast relies on explicit source/group membership signaling rather than any-source group joins. That explains a DIFFERENT scenario: A multicast source sends video to an SSM group, but an access router uses IGMPv2 joins without source specification and receivers see no stream. The mechanism to prioritize for this question is: PIM designated-router election affects which router performs certain source and join responsibilities on a shared LAN.

C:

IGMP controls IPv4 multicast listener membership, while MLD performs the analogous role for IPv6. That explains a DIFFERENT scenario: An IPv6 multicast receiver joins an MLDv2 group, but the adjacent router polls only IGMP state and reports no listeners. The mechanism to prioritize for this question is: PIM designated-router election affects which router performs certain source and join responsibilities on a shared LAN.

D:

L3VPN path choice is influenced by per-service routing policy in addition to reachability and transport labels. That explains a DIFFERENT scenario: A customer VRF needs dual-homed connectivity yet the provider sets local preference to favor the backup for all customer routes, causing avoidable transit cost. The mechanism to prioritize for this question is: PIM designated-router election affects which router performs certain source and join responsibilities on a shared LAN.

Question 620

After addressing: Two multicast access routers each act as designated router for the same LAN after a timer mismatch and receivers see repeated source register behavior. Which recurring service assurance check is most useful?

  1. Include both IGMP and MLD listener tests on dual-stack access nodes.
  2. Test DR state when changing multicast LAN interfaces.
  3. Validate host and router IGMPv3 compatibility before deploying SSM services.
  4. Inspect header encapsulation at both service demarcations after provider bridge changes.

Explanation

Correct Answer

B:

Test DR state when changing multicast LAN interfaces. This helps prevent recurrence of the issue: Two multicast access routers each act as designated router for the same LAN after a timer mismatch and receivers see repeated source register behavior. Acceptance evidence should be: One intended DR is elected and the shared LAN emits the expected controlled PIM behavior.

Incorrect Answers

A:

Include both IGMP and MLD listener tests on dual-stack access nodes. That is a sensible control for ANOTHER scenario: An IPv6 multicast receiver joins an MLDv2 group, but the adjacent router polls only IGMP state and reports no listeners. It is less targeted to this issue than: Test DR state when changing multicast LAN interfaces.

C:

Validate host and router IGMPv3 compatibility before deploying SSM services. That is a sensible control for ANOTHER scenario: A multicast source sends video to an SSM group, but an access router uses IGMPv2 joins without source specification and receivers see no stream. It is less targeted to this issue than: Test DR state when changing multicast LAN interfaces.

D:

Inspect header encapsulation at both service demarcations after provider bridge changes. That is a sensible control for ANOTHER scenario: A carrier backbone applies provider bridging with 802.1ah MAC-in-MAC but its edge fails to strip the outer backbone header, so customer switches receive unknown backbone addresses. It is less targeted to this issue than: Test DR state when changing multicast LAN interfaces.