McAfee-Secured Website

Exam Bundle

Exam Code: 350-501

Exam Name Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR)

Certification Provider: Cisco

Corresponding Certifications: CCIE Service Provider , CCNP Service Provider

Cisco 350-501 Bundle $28.79

100% Cisco 350-501 Guaranteed Success With Testking Training Materials

Get Real 350-501 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    350-501 Questions & Answers

    528 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 350-501 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 350-501 Video Course

    350-501 Video Course

    253 Video Lectures

    350-501 Video Course is developed by Cisco Professionals to help you pass the 350-501 exam.

    Description

    This course will improve your knowledge and skills required to pass Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) exam.
  • Study Guide

    350-501 Study Guide

    1160 PDF Pages

    Developed by industry experts, this 1160-page guide spells out in painstaking detail all of the information you need to ace 350-501 exam.

Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) (350-501) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $189.97
Bundle Price: $161.18

Purchase Individually

  • Questions & Answers

    Questions & Answers

    528 Questions

    $124.99
  • 350-501 Video Course

    Video Course

    253 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1160 PDF Pages

    $24.99

Cisco 350-501 Practice Test 57

Question 560

To prevent recurrence of this provider network issue: A customer sends traffic marked CS6 from its access port and expects unlimited priority throughout the provider despite not purchasing a network-control service class. Which control should be retained?

  1. Audit per-hop QoS markings and queue drops during service activation.
  2. Record shaper configuration and measured burst response for each access product.
  3. Include untrusted DSCP abuse tests at provider access interfaces.
  4. Include both IGMP and MLD listener tests on dual-stack access nodes.

Explanation

Correct Answer

C:

Include untrusted DSCP abuse tests at provider access interfaces. This helps prevent recurrence of the issue: A customer sends traffic marked CS6 from its access port and expects unlimited priority throughout the provider despite not purchasing a network-control service class. Acceptance evidence should be: Customer test packets receive the contracted class, and provider protocol packets retain protected control priority.

Incorrect Answers

A:

Audit per-hop QoS markings and queue drops during service activation. That is a sensible control for ANOTHER scenario: A provider classifies customer voice using DSCP EF at ingress but a later output policy remarks it to best effort, causing jitter under congestion. It is less targeted to this issue than: Include untrusted DSCP abuse tests at provider access interfaces.

B:

Record shaper configuration and measured burst response for each access product. That is a sensible control for ANOTHER scenario: A traffic shaper is configured with a committed rate lower than the contracted customer rate and drops bursts even though physical uplink capacity is idle. It is less targeted to this issue than: Include untrusted DSCP abuse tests at provider access interfaces.

D:

Include both IGMP and MLD listener tests on dual-stack access nodes. That is a sensible control for ANOTHER scenario: An IPv6 multicast receiver joins an MLDv2 group, but the adjacent router polls only IGMP state and reports no listeners. It is less targeted to this issue than: Include untrusted DSCP abuse tests at provider access interfaces.

Question 561

At a regional service-provider operations center, an engineering review finds: A new IPv6-only service is added to an IS-IS core, but routers run a single topology configuration where the IPv6 reachability bits are not negotiated consistently. Which change most directly corrects the service problem?

  1. Match IPv6 participation and supported single-topology settings on the participating IS-IS routers.
  2. Set the intended IS-IS wide metric on the optical link based on approved transport cost.
  3. Verify IS-IS IPv6 address family and multitopology participation on all transit adjacencies along the route.
  4. Establish proper next-hop reachability via the IGP or an approved next-hop-self policy at the correct border.

Explanation

Correct Answer

A:

Match IPv6 participation and supported single-topology settings on the participating IS-IS routers. This directly addresses the fictional service-provider network case: A new IPv6-only service is added to an IS-IS core, but routers run a single topology configuration where the IPv6 reachability bits are not negotiated consistently. The technical mechanism is: IPv6 IS-IS topology rules must be consistent to avoid partial SPF or route installation. Verify success by: Route verification shows full IPv6 prefix reachability with stable LSP exchange.

Incorrect Answers

B:

Set the intended IS-IS wide metric on the optical link based on approved transport cost. This would respond to a DIFFERENT fictional service-provider network issue: An IS-IS L2 router forms adjacency but traffic chooses a high-latency optical link because the interface metric was left at a low default. It does not directly address the current situation: A new IPv6-only service is added to an IS-IS core, but routers run a single topology configuration where the IPv6 reachability bits are not negotiated consistently.

C:

Verify IS-IS IPv6 address family and multitopology participation on all transit adjacencies along the route. This would respond to a DIFFERENT fictional service-provider network issue: An IPv6 service prefix disappears after enabling IS-IS multitopology, and operations only checks the IPv4 SPF database. It does not directly address the current situation: A new IPv6-only service is added to an IS-IS core, but routers run a single topology configuration where the IPv6 reachability bits are not negotiated consistently.

D:

Establish proper next-hop reachability via the IGP or an approved next-hop-self policy at the correct border. This would respond to a DIFFERENT fictional service-provider network issue: An iBGP core advertises a prefix with a next hop that access routers cannot resolve, causing BGP routes to be present but inactive. It does not directly address the current situation: A new IPv6-only service is added to an IS-IS core, but routers run a single topology configuration where the IPv6 reachability bits are not negotiated consistently.

Question 562

For a regional service-provider operations center, operators addressed: A new IPv6-only service is added to an IS-IS core, but routers run a single topology configuration where the IPv6 reachability bits are not negotiated consistently. What is the strongest acceptance evidence?

  1. A test prefix from the remote area appears in the intended routing table without unintended leaking of unrelated routes.
  2. Route verification shows full IPv6 prefix reachability with stable LSP exchange.
  3. A lab peering test establishes a stable adjacency and exchanges the intended LSPs.
  4. A lab tuple resolves to the correct subscriber session without conflating two simultaneous clients.

Explanation

Correct Answer

B:

Route verification shows full IPv6 prefix reachability with stable LSP exchange. This confirms the approved response: Match IPv6 participation and supported single-topology settings on the participating IS-IS routers. It is relevant because: IPv6 IS-IS topology rules must be consistent to avoid partial SPF or route installation.

Incorrect Answers

A:

A test prefix from the remote area appears in the intended routing table without unintended leaking of unrelated routes. This would validate ANOTHER scenario: Two provider core routers form an IS-IS L1 adjacency but do not exchange a prefix from another area because the engineer assumes L1 routers have universal interarea visibility. The specific correction here is: Match IPv6 participation and supported single-topology settings on the participating IS-IS routers.

C:

A lab peering test establishes a stable adjacency and exchanges the intended LSPs. This would validate ANOTHER scenario: A point-to-point IS-IS link remains up but an engineer changes circuit type to level-1-only at one side while the peer is level-2-only. The specific correction here is: Match IPv6 participation and supported single-topology settings on the participating IS-IS routers.

D:

A lab tuple resolves to the correct subscriber session without conflating two simultaneous clients. This would validate ANOTHER scenario: A CGNAT operator has millions of sessions but translation logs record only subscriber private addresses, making legal attribution impossible for shared public IPv4 connections. The specific correction here is: Match IPv6 participation and supported single-topology settings on the participating IS-IS routers.

Question 563

Which network protocol or forwarding behavior explains the following issue: A new IPv6-only service is added to an IS-IS core, but routers run a single topology configuration where the IPv6 reachability bits are not negotiated consistently.

  1. Neighbors must share a usable IS-IS level and compatible link parameters to exchange routing information.
  2. IS-IS route leaking and summarization affect interlevel reachability, and an incorrect aggregate can conceal missing specifics.
  3. IPv6 IS-IS topology rules must be consistent to avoid partial SPF or route installation.
  4. High availability must account for postfailure capacity, not merely the existence of an alternate topology path.

Explanation

Correct Answer

C:

IPv6 IS-IS topology rules must be consistent to avoid partial SPF or route installation. This explains the investigated issue: A new IPv6-only service is added to an IS-IS core, but routers run a single topology configuration where the IPv6 reachability bits are not negotiated consistently. The approved corrective response is: Match IPv6 participation and supported single-topology settings on the participating IS-IS routers.

Incorrect Answers

A:

Neighbors must share a usable IS-IS level and compatible link parameters to exchange routing information. That explains a DIFFERENT scenario: A point-to-point IS-IS link remains up but an engineer changes circuit type to level-1-only at one side while the peer is level-2-only. The mechanism to prioritize for this question is: IPv6 IS-IS topology rules must be consistent to avoid partial SPF or route installation.

B:

IS-IS route leaking and summarization affect interlevel reachability, and an incorrect aggregate can conceal missing specifics. That explains a DIFFERENT scenario: A link between routing domains advertises a summary into the wrong IS-IS level, so traffic loops toward an area without the actual component prefix. The mechanism to prioritize for this question is: IPv6 IS-IS topology rules must be consistent to avoid partial SPF or route installation.

D:

High availability must account for postfailure capacity, not merely the existence of an alternate topology path. That explains a DIFFERENT scenario: A core routing node performs maintenance with all traffic temporarily pinned to one uplink, exceeding the designed capacity even though connectivity stays up. The mechanism to prioritize for this question is: IPv6 IS-IS topology rules must be consistent to avoid partial SPF or route installation.

Question 564

A core network change board wants to avoid: A new IPv6-only service is added to an IS-IS core, but routers run a single topology configuration where the IPv6 reachability bits are not negotiated consistently. Which ongoing safeguard fits best?

  1. Add a common-level check to link commissioning scripts.
  2. Review IGP link metrics against current network capacity and service objectives.
  3. Review candidate redistribution tables under a default-deny policy.
  4. Perform IPv6 topology capability verification for every new core node.

Explanation

Correct Answer

D:

Perform IPv6 topology capability verification for every new core node. This helps prevent recurrence of the issue: A new IPv6-only service is added to an IS-IS core, but routers run a single topology configuration where the IPv6 reachability bits are not negotiated consistently. Acceptance evidence should be: Route verification shows full IPv6 prefix reachability with stable LSP exchange.

Incorrect Answers

A:

Add a common-level check to link commissioning scripts. That is a sensible control for ANOTHER scenario: A point-to-point IS-IS link remains up but an engineer changes circuit type to level-1-only at one side while the peer is level-2-only. It is less targeted to this issue than: Perform IPv6 topology capability verification for every new core node.

B:

Review IGP link metrics against current network capacity and service objectives. That is a sensible control for ANOTHER scenario: An IS-IS L2 router forms adjacency but traffic chooses a high-latency optical link because the interface metric was left at a low default. It is less targeted to this issue than: Perform IPv6 topology capability verification for every new core node.

C:

Review candidate redistribution tables under a default-deny policy. That is a sensible control for ANOTHER scenario: An edge router injects all OSPF internals into BGP without tagging or policy, exposing infrastructure loopbacks to a customer upstream. It is less targeted to this issue than: Perform IPv6 topology capability verification for every new core node.

Question 565

A carrier service activation check discovers: A multiaccess OSPF network forms neighbor relationships but routes stay stuck at 2-Way between two DROTHER peers, and the operator repeatedly resets them. Which action best restores the intended behavior?

  1. Align effective MTU or approved interface configuration, then verify database exchange.
  2. Verify the DR/BDR design and inspect Full adjacencies with the designated router rather than forcing every DROTHER to Full.
  3. Align OSPF reference bandwidth and interface cost across the routing domain to the engineered capacity plan.
  4. Introduce the appropriate L1/L2 boundary or L2 route advertisement and review the required reachability design.

Explanation

Correct Answer

B:

Verify the DR/BDR design and inspect Full adjacencies with the designated router rather than forcing every DROTHER to Full. This directly addresses the fictional service-provider network case: A multiaccess OSPF network forms neighbor relationships but routes stay stuck at 2-Way between two DROTHER peers, and the operator repeatedly resets them. The technical mechanism is: OSPF broadcast networks use DR/BDR adjacency optimization rather than full mesh formation. Verify success by: The DR has Full adjacencies and LSDB convergence while DROTHER peers show their expected state.

Incorrect Answers

A:

Align effective MTU or approved interface configuration, then verify database exchange. This would respond to a DIFFERENT fictional service-provider network issue: Two provider OSPFv2 routers share an Ethernet segment but never advance past EXSTART because one end uses an incompatible interface MTU. It does not directly address the current situation: A multiaccess OSPF network forms neighbor relationships but routes stay stuck at 2-Way between two DROTHER peers, and the operator repeatedly resets them.

C:

Align OSPF reference bandwidth and interface cost across the routing domain to the engineered capacity plan. This would respond to a DIFFERENT fictional service-provider network issue: A customer circuit has high latency but OSPF chooses it over the primary because reference bandwidth was never updated for modern high-speed links. It does not directly address the current situation: A multiaccess OSPF network forms neighbor relationships but routes stay stuck at 2-Way between two DROTHER peers, and the operator repeatedly resets them.

D:

Introduce the appropriate L1/L2 boundary or L2 route advertisement and review the required reachability design. This would respond to a DIFFERENT fictional service-provider network issue: Two provider core routers form an IS-IS L1 adjacency but do not exchange a prefix from another area because the engineer assumes L1 routers have universal interarea visibility. It does not directly address the current situation: A multiaccess OSPF network forms neighbor relationships but routes stay stuck at 2-Way between two DROTHER peers, and the operator repeatedly resets them.

Question 566

Following a supported configuration correction, the original issue was: A multiaccess OSPF network forms neighbor relationships but routes stay stuck at 2-Way between two DROTHER peers, and the operator repeatedly resets them. Which observation verifies success?

  1. The lab adjacency reaches Full and the stub router installs the designated default route.
  2. The selected path follows the expected OSPF cost and remains consistent across neighbors.
  3. The DR has Full adjacencies and LSDB convergence while DROTHER peers show their expected state.
  4. Candidate traces identify the final tie-breaker and forwarding remains consistent across repeated resets.

Explanation

Correct Answer

C:

The DR has Full adjacencies and LSDB convergence while DROTHER peers show their expected state. This confirms the approved response: Verify the DR/BDR design and inspect Full adjacencies with the designated router rather than forcing every DROTHER to Full. It is relevant because: OSPF broadcast networks use DR/BDR adjacency optimization rather than full mesh formation.

Incorrect Answers

A:

The lab adjacency reaches Full and the stub router installs the designated default route. This would validate ANOTHER scenario: An OSPF stub area loses its expected default route when an engineer configures stub mode on the access router but not consistently on the area border router. The specific correction here is: Verify the DR/BDR design and inspect Full adjacencies with the designated router rather than forcing every DROTHER to Full.

B:

The selected path follows the expected OSPF cost and remains consistent across neighbors. This would validate ANOTHER scenario: A customer circuit has high latency but OSPF chooses it over the primary because reference bandwidth was never updated for modern high-speed links. The specific correction here is: Verify the DR/BDR design and inspect Full adjacencies with the designated router rather than forcing every DROTHER to Full.

D:

Candidate traces identify the final tie-breaker and forwarding remains consistent across repeated resets. This would validate ANOTHER scenario: BGP flips between two equal candidates because a team ignores the router-id and neighbor-address tie-breakers after all higher-ranked attributes match. The specific correction here is: Verify the DR/BDR design and inspect Full adjacencies with the designated router rather than forcing every DROTHER to Full.

Question 567

At a wholesale transit provider, an engineer examines: A multiaccess OSPF network forms neighbor relationships but routes stay stuck at 2-Way between two DROTHER peers, and the operator repeatedly resets them. Which technical principle is most applicable?

  1. OSPFv3 control adjacency does not guarantee a route is installed in every VRF or address family.
  2. IPv6 link-local addresses are scoped to their link and need an interface scope when referenced locally.
  3. BGP best-path selection compares multiple attributes in a defined order rather than relying solely on IGP metrics.
  4. OSPF broadcast networks use DR/BDR adjacency optimization rather than full mesh formation.

Explanation

Correct Answer

D:

OSPF broadcast networks use DR/BDR adjacency optimization rather than full mesh formation. This explains the investigated issue: A multiaccess OSPF network forms neighbor relationships but routes stay stuck at 2-Way between two DROTHER peers, and the operator repeatedly resets them. The approved corrective response is: Verify the DR/BDR design and inspect Full adjacencies with the designated router rather than forcing every DROTHER to Full.

Incorrect Answers

A:

OSPFv3 control adjacency does not guarantee a route is installed in every VRF or address family. That explains a DIFFERENT scenario: An OSPFv3 adjacency is up but IPv6 routes are absent because the required address-family instance is missing from the receiving VRF. The mechanism to prioritize for this question is: OSPF broadcast networks use DR/BDR adjacency optimization rather than full mesh formation.

B:

IPv6 link-local addresses are scoped to their link and need an interface scope when referenced locally. That explains a DIFFERENT scenario: An OSPFv3 deployment uses a link-local neighbor address and the monitoring system mistakenly treats it as globally reachable offlink for management. The mechanism to prioritize for this question is: OSPF broadcast networks use DR/BDR adjacency optimization rather than full mesh formation.

C:

BGP best-path selection compares multiple attributes in a defined order rather than relying solely on IGP metrics. That explains a DIFFERENT scenario: Two eBGP routes reach the same prefix with equal local preference, but operations assumes a shorter AS_PATH cannot affect selection and blames a metric change. The mechanism to prioritize for this question is: OSPF broadcast networks use DR/BDR adjacency optimization rather than full mesh formation.

Question 568

For a wholesale transit provider, the change record describes: A multiaccess OSPF network forms neighbor relationships but routes stay stuck at 2-Way between two DROTHER peers, and the operator repeatedly resets them. What preventive validation should be standard?

  1. Teach neighbor-state expectations per OSPF network type in runbooks.
  2. Test protocol instance, VRF and AF together in route acceptance.
  3. Revalidate summaries against the address plan after branch network changes.
  4. Include DNS synthesis and DNSSEC compatibility cases in NAT64 acceptance.

Explanation

Correct Answer

A:

Teach neighbor-state expectations per OSPF network type in runbooks. This helps prevent recurrence of the issue: A multiaccess OSPF network forms neighbor relationships but routes stay stuck at 2-Way between two DROTHER peers, and the operator repeatedly resets them. Acceptance evidence should be: The DR has Full adjacencies and LSDB convergence while DROTHER peers show their expected state.

Incorrect Answers

B:

Test protocol instance, VRF and AF together in route acceptance. That is a sensible control for ANOTHER scenario: An OSPFv3 adjacency is up but IPv6 routes are absent because the required address-family instance is missing from the receiving VRF. It is less targeted to this issue than: Teach neighbor-state expectations per OSPF network type in runbooks.

C:

Revalidate summaries against the address plan after branch network changes. That is a sensible control for ANOTHER scenario: An ABR summarizes branch routes into one large prefix that points into an area missing part of the address space, leading to a forwarding loop for unallocated addresses. It is less targeted to this issue than: Teach neighbor-state expectations per OSPF network type in runbooks.

D:

Include DNS synthesis and DNSSEC compatibility cases in NAT64 acceptance. That is a sensible control for ANOTHER scenario: An IPv6-only access service installs NAT64 but does not provide a method to obtain suitable IPv6 destinations for IPv4-only DNS names, so subscribers fail by hostname. It is less targeted to this issue than: Teach neighbor-state expectations per OSPF network type in runbooks.

Question 569

For a multi-region fiber backbone operator, the failure is: BGP flips between two equal candidates because a team ignores the router-id and neighbor-address tie-breakers after all higher-ranked attributes match. Which authorized correction best addresses it?

  1. Inspect ordered BGP best-path attributes and compare AS_PATH length after local preference and other preceding decision rules.
  2. Distinguish local multipath forwarding eligibility from Additional Paths capability and policy when multiple BGP alternatives must be advertised.
  3. Inspect the full deterministic tie-breaking sequence and stabilize the intended export policy if one exit must be preferred.
  4. Match IPv6 participation and supported single-topology settings on the participating IS-IS routers.

Explanation

Correct Answer

C:

Inspect the full deterministic tie-breaking sequence and stabilize the intended export policy if one exit must be preferred. This directly addresses the fictional service-provider network case: BGP flips between two equal candidates because a team ignores the router-id and neighbor-address tie-breakers after all higher-ranked attributes match. The technical mechanism is: BGP best-path selection includes deterministic final tie-breakers when major attributes are equal. Verify success by: Candidate traces identify the final tie-breaker and forwarding remains consistent across repeated resets.

Incorrect Answers

A:

Inspect ordered BGP best-path attributes and compare AS_PATH length after local preference and other preceding decision rules. This would respond to a DIFFERENT fictional service-provider network issue: Two eBGP routes reach the same prefix with equal local preference, but operations assumes a shorter AS_PATH cannot affect selection and blames a metric change. It does not directly address the current situation: BGP flips between two equal candidates because a team ignores the router-id and neighbor-address tie-breakers after all higher-ranked attributes match.

B:

Distinguish local multipath forwarding eligibility from Additional Paths capability and policy when multiple BGP alternatives must be advertised. This would respond to a DIFFERENT fictional service-provider network issue: A route reflector learns several equivalent multipath candidates but advertises only its best path and a customer confuses multipath forwarding with multiple advertised path dissemination. It does not directly address the current situation: BGP flips between two equal candidates because a team ignores the router-id and neighbor-address tie-breakers after all higher-ranked attributes match.

D:

Match IPv6 participation and supported single-topology settings on the participating IS-IS routers. This would respond to a DIFFERENT fictional service-provider network issue: A new IPv6-only service is added to an IS-IS core, but routers run a single topology configuration where the IPv6 reachability bits are not negotiated consistently. It does not directly address the current situation: BGP flips between two equal candidates because a team ignores the router-id and neighbor-address tie-breakers after all higher-ranked attributes match.

Question 570

After fixing the following network problem, what should the team verify: BGP flips between two equal candidates because a team ignores the router-id and neighbor-address tie-breakers after all higher-ranked attributes match.

  1. A test route exits through the desired high-local-preference border where both paths are otherwise eligible.
  2. A fixture shows the expected origin-type comparison only after preceding attributes tie.
  3. Peering remains healthy and management attempts use a routable endpoint instead of a bare link-local address.
  4. Candidate traces identify the final tie-breaker and forwarding remains consistent across repeated resets.

Explanation

Correct Answer

D:

Candidate traces identify the final tie-breaker and forwarding remains consistent across repeated resets. This confirms the approved response: Inspect the full deterministic tie-breaking sequence and stabilize the intended export policy if one exit must be preferred. It is relevant because: BGP best-path selection includes deterministic final tie-breakers when major attributes are equal.

Incorrect Answers

A:

A test route exits through the desired high-local-preference border where both paths are otherwise eligible. This would validate ANOTHER scenario: A carrier's inbound customer route has local preference 200 but another exit's route has a shorter AS_PATH, and the team incorrectly expects the short path to win. The specific correction here is: Inspect the full deterministic tie-breaking sequence and stabilize the intended export policy if one exit must be preferred.

B:

A fixture shows the expected origin-type comparison only after preceding attributes tie. This would validate ANOTHER scenario: A BGP router holds multiple valid paths yet chooses an unanticipated route because one path has a smaller origin code, not because of a mistaken community. The specific correction here is: Inspect the full deterministic tie-breaking sequence and stabilize the intended export policy if one exit must be preferred.

C:

Peering remains healthy and management attempts use a routable endpoint instead of a bare link-local address. This would validate ANOTHER scenario: An OSPFv3 deployment uses a link-local neighbor address and the monitoring system mistakenly treats it as globally reachable offlink for management. The specific correction here is: Inspect the full deterministic tie-breaking sequence and stabilize the intended export policy if one exit must be preferred.