McAfee-Secured Website

Exam Bundle

Exam Code: 200-301

Exam Name Cisco Certified Network Associate (CCNA)

Certification Provider: Cisco

Corresponding Certification: CCNA

Cisco 200-301 Bundle $44.99

100% Cisco 200-301 Guaranteed Success With Testking Training Materials

Get Real 200-301 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    200-301 Questions & Answers

    760 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 200-301 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 200-301 Video Course

    200-301 Video Course

    271 Video Lectures

    200-301 Video Course is developed by Cisco Professionals to help you pass the 200-301 exam.

    Description

    This course will improve your knowledge and skills required to pass Cisco Certified Network Associate (CCNA) exam.
  • Study Guide

    200-301 Study Guide

    1969 PDF Pages

    Developed by industry experts, this 1969-page guide spells out in painstaking detail all of the information you need to ace 200-301 exam.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    760 Questions

    $124.99
  • 200-301 Video Course

    Video Course

    271 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1969 PDF Pages

    $29.99

Cisco 200-301 Practice Test 43

Question 420

In `S 172.19.34.0/24 [1/0] via 192.0.2.62`, a junior engineer searches for destination 172.19.34.0 but compares the packet destination to 192.0.2.62. Which entry field is the actual match target?

  1. The metric value 0
  2. The network prefix 172.19.34.0/24
  3. The administrative distance value 1
  4. The via next hop 192.0.2.62

Explanation

Correct Answer

B:

The route prefix defines which destination addresses the entry covers; the via IP identifies forwarding next hop.

Incorrect Answers

A:

A metric indicates a cost, not the destination network.

C:

AD helps select among routes to a common prefix; it is not an IP destination range.

D:

The next hop is an outgoing forwarding target, not the destination prefix being matched.

Question 421

A router prints `O 10.88.16.0/20 [110/40] via 192.0.2.9, GigabitEthernet0/0`. Which value is the installed route’s administrative distance?

  1. 110
  2. 192
  3. 40
  4. 20

Explanation

Correct Answer

A:

Cisco route output uses [administrative distance/metric]; 110 is the OSPF administrative distance here.

Incorrect Answers

B:

192 is part of the next-hop IP address, not an administrative distance.

C:

40 is the OSPF metric in the displayed bracket, not the administrative distance.

D:

20 is the destination prefix length, not an administrative distance.

Question 422

`show ip route` displays `Gateway of last resort is 192.0.2.59 to network 0.0.0.0`. A packet has no more-specific route. Which next-hop behavior follows?

  1. Return to the source without consulting a default
  2. Broadcast the packet on every LAN VLAN
  3. Try default forwarding toward 192.0.2.59 if the installed default is usable
  4. Use only the lowest-numbered loopback address

Explanation

Correct Answer

C:

The gateway of last resort is used as the IPv4 route fallback for otherwise unmatched destinations.

Incorrect Answers

A:

A present usable default route is specifically intended to handle otherwise unmatched addresses.

B:

Ordinary routing never floods an unmatched IP packet to every VLAN.

D:

Router loopbacks are not automatically a forwarding fallback.

Question 423

A router shows `C 192.0.2.0/24 is directly connected, Gi0/0` and `L 192.0.2.1/32 is directly connected, Gi0/0`. What does the L route mean?

  1. It identifies the router’s own interface IPv4 host address
  2. It is an automatically learned external BGP route
  3. It represents the broadcast address for the /24 subnet
  4. It overrides all more-specific routes for unrelated destinations

Explanation

Correct Answer

A:

IOS installs a local host route for the configured interface address, in addition to the connected subnet route.

Incorrect Answers

B:

The L code is locally attached, not a BGP-learned external path.

C:

192.0.2.1 is the assigned interface host address, not 192.0.2.255 broadcast.

D:

A /32 local route applies only to its exact address, not arbitrary destinations.

Question 424

A device shows `C 10.70.0.0/16` and `O 172.22.10.0/24`. Its OSPF process is stopped while the directly connected 10.70.0.0/16 interface remains operational. What route survives?

  1. The C directly connected 10.70.0.0/16 subnet
  2. Both survive as manually configured static routes
  3. Only the O prefix survives
  4. Neither survives because all routes require OSPF

Explanation

Correct Answer

A:

A connected route depends on local interface state, not an OSPF process.

Incorrect Answers

B:

Codes C and O do not identify static routes.

C:

The O route relies on OSPF; stopping the process normally removes it.

D:

Connected networks are independently derived from interfaces.

Question 425

A row reads `S 172.20.20.0/24 [1/0] via 192.0.2.4`. An audit report says metric zero makes this a directly connected subnet. What correction is required?

  1. The /24 mask changes the S code to OSPF
  2. A connected route must show a via neighbor in every case
  3. Metric zero guarantees this is a C route
  4. S means a static route; metric 0 does not turn it into connected C

Explanation

Correct Answer

D:

The routing source is indicated by the code, not merely by its metric field.

Incorrect Answers

A:

Subnet length does not determine route origin.

B:

Connected entries normally name their attached local interface.

C:

An explicitly static route can show cost or metric zero.

Question 426

A router holds `O 10.20.0.0/16 [110/20] via 192.0.2.1` and `S 10.20.4.0/24 [200/0] via 192.0.2.2`. Both next hops are reachable. Which entry forwards a packet to 10.20.4.19?

  1. Both routes equally because they match the destination
  2. No route because the host address ends in .19
  3. The static 10.20.4.0/24 route via 192.0.2.2
  4. The OSPF 10.20.0.0/16 route via 192.0.2.1

Explanation

Correct Answer

C:

Forwarding first selects the longest matching prefix; /24 is more specific than /16 even though its AD is higher.

Incorrect Answers

A:

The routes have different prefix lengths, so they do not form equivalent ECMP candidates for this destination.

B:

The 10.20.4.0/24 prefix covers hosts .0 through .255, including .19.

D:

The lower AD is relevant only when candidates match the same destination prefix, not when /24 is more specific.

Question 427

A network router still has `S* 0.0.0.0/0 via 192.0.2.5`, but the learned route to 198.51.100.0/24 was withdrawn. What happens to the next packet addressed to 198.51.100.20?

  1. It necessarily goes to Null0 even though no discard route is listed
  2. It must be broadcast on every VLAN
  3. It can use 192.0.2.5 as the remaining default next hop
  4. It must use the withdrawn OSPF prefix

Explanation

Correct Answer

C:

The installed /0 fallback matches destinations for which no longer prefix remains.

Incorrect Answers

A:

A usable default is present, and no Null0 drop path was stated.

B:

IP routing does not flood unmatched destinations.

D:

A withdrawn route is not available for forwarding.

Question 428

The `show ip route` header now reads `Gateway of last resort is not set`. A destination matches none of the listed connected routes. Which conclusion is correct?

  1. A default exists automatically with next hop 0.0.0.0
  2. The best OSPF neighbor must forward all unmatched addresses
  3. No installed default route is available to forward that unmatched packet
  4. The packet will use the numerically lowest router ID

Explanation

Correct Answer

C:

Without a matching specific route or default, the router cannot select a next hop.

Incorrect Answers

A:

0.0.0.0 does not create an automatic forwarding next hop.

B:

An OSPF adjacency does not supply a default route without an installed /0 advertisement.

D:

Router IDs are not automatic forwarding fallback targets.

Question 429

A route table line reads `O IA 172.20.8.0/24 [110/40] via 192.0.2.6`. An engineer calls this a directly connected route. What does the `O IA` code actually identify?

  1. A manually configured static IPv4 network route
  2. A local interface address installed as a /32 host route
  3. An EIGRP external route with metric 40
  4. An OSPF inter-area route learned from another area

Explanation

Correct Answer

D:

O IA is the OSPF inter-area route code; connected routes are marked C.

Incorrect Answers

A:

Static route entries are marked S, not O IA.

B:

The code L denotes the router’s own interface address, not OSPF inter-area reachability.

C:

EIGRP uses D or D EX; the O IA prefix is OSPF-originated.

Question 430

Two OSPF candidate paths both have AD 110 to 10.80.40.0/24, with bracketed values [110/12] and [110/45]. Which comparison matters after identical prefix and administrative distance?

  1. Compare the metrics 12 and 45; the route with cost 12 is preferred
  2. The route with AD 110 is always preferred over the other
  3. The next hop with a numerically larger IPv4 address is always chosen
  4. The route with cost 45 wins because it is larger

Explanation

Correct Answer

A:

For identical-prefix OSPF routes with equal AD, the smaller path cost is selected.

Incorrect Answers

B:

Both routes have exactly the same AD, so this does not distinguish them.

C:

Next-hop numeric magnitude is not a routing metric.

D:

OSPF metrics prefer smaller total cost.