McAfee-Secured Website

Exam Bundle

Exam Code: 200-301

Exam Name Cisco Certified Network Associate (CCNA)

Certification Provider: Cisco

Corresponding Certification: CCNA

Cisco 200-301 Bundle $44.99

100% Cisco 200-301 Guaranteed Success With Testking Training Materials

Get Real 200-301 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    200-301 Questions & Answers

    760 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 200-301 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 200-301 Video Course

    200-301 Video Course

    271 Video Lectures

    200-301 Video Course is developed by Cisco Professionals to help you pass the 200-301 exam.

    Description

    This course will improve your knowledge and skills required to pass Cisco Certified Network Associate (CCNA) exam.
  • Study Guide

    200-301 Study Guide

    1969 PDF Pages

    Developed by industry experts, this 1969-page guide spells out in painstaking detail all of the information you need to ace 200-301 exam.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    760 Questions

    $124.99
  • 200-301 Video Course

    Video Course

    271 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1969 PDF Pages

    $29.99

Cisco 200-301 Practice Test 44

Question 430

Two OSPF candidate paths both have AD 110 to 10.80.40.0/24, with bracketed values [110/12] and [110/45]. Which comparison matters after identical prefix and administrative distance?

  1. Compare the metrics 12 and 45; the route with cost 12 is preferred
  2. The route with AD 110 is always preferred over the other
  3. The next hop with a numerically larger IPv4 address is always chosen
  4. The route with cost 45 wins because it is larger

Explanation

Correct Answer

A:

For identical-prefix OSPF routes with equal AD, the smaller path cost is selected.

Incorrect Answers

B:

Both routes have exactly the same AD, so this does not distinguish them.

C:

Next-hop numeric magnitude is not a routing metric.

D:

OSPF metrics prefer smaller total cost.

Question 431

A switch routed port moved from Gi1/0/2 to Gi1/0/3 and `show ip route` now lists `C 10.80.30.0/24 is directly connected, Gi1/0/3`. What does the interface field identify?

  1. The configured static route next-hop address
  2. The local egress routed interface attached to 10.80.30.0/24
  3. The entire VLAN trunk allowed list
  4. The IP address of a remote OSPF router

Explanation

Correct Answer

B:

Connected routes associate the subnet with the router’s own operational interface.

Incorrect Answers

A:

A connected route normally names the outgoing local interface rather than a manual static via address.

C:

A connected routing table entry is not a VLAN trunk summary.

D:

A device interface label is not a neighbor’s router ID.

Question 432

A router shows `O 172.22.48.0/24 [110/17] via 192.0.2.11`. After an interface cost adjustment, output changes to `[110/33]`. What changed?

  1. The administrative distance increased by 16
  2. The next hop changed to 33
  3. The prefix changed from /17 to /33
  4. The OSPF path metric rose from 17 to 33 while administrative distance remained 110

Explanation

Correct Answer

D:

The first bracket number is AD, unchanged; the second is the total OSPF metric.

Incorrect Answers

A:

AD is the first number and remains 110 in both entries.

B:

The via next-hop address remains 192.0.2.11.

C:

The bracket numbers are not the prefix; the entry remains /24.

Question 433

The table includes `S* 0.0.0.0/0 via 192.0.2.5` and `O 10.88.50.0/24 via 192.0.2.6`. A packet arrives for 10.88.50.100. Which route is used?

  1. The S* default solely because of the asterisk
  2. Both as equal-cost because one is static
  3. No route because OSPF needs a /32 for every host
  4. The matching OSPF 10.88.50.0/24 route

Explanation

Correct Answer

D:

A /24 is more specific than /0 even when the default is marked as a candidate gateway of last resort.

Incorrect Answers

A:

The asterisk signals a candidate default, not precedence over a matching /24.

B:

They are different prefix lengths, so they are not ECMP to this destination.

C:

A /24 route can forward to hosts within that subnet.

Question 434

Two configured static routes target 172.19.40.0/24, one [1/0] via 192.0.2.3 and one [200/0] via 192.0.2.4. Both next hops resolve. Which route takes precedence?

  1. The floating static route with AD 200
  2. The static route with AD 1 via 192.0.2.3
  3. They share traffic equally because metric zero
  4. The router must drop the prefix because it has two definitions

Explanation

Correct Answer

B:

For the identical prefix, lower administrative distance wins; 1 precedes 200.

Incorrect Answers

A:

A higher AD means less preferred, suitable for standby.

C:

Different administrative distances mean they are not equal preference.

D:

Cisco routing can keep a less-preferred configured backup route.

Question 435

An IOS route shows `O 198.51.100.0/24 [110/26] via 192.0.2.18, GigabitEthernet0/1`. Which two numbers describe route preference and the OSPF path measurement?

  1. OSPF metric 110, then administrative distance 26
  2. Administrative distance 110, then OSPF metric 26
  3. Prefix length 110 and hop count 26
  4. Interface index 110 and next-hop IP suffix 26

Explanation

Correct Answer

B:

In Cisco routing output [110/26] means AD 110 and route metric 26 in that order.

Incorrect Answers

A:

This reverses the bracket fields; the first element is AD.

C:

The destination prefix is separately shown as /24; the brackets are not its mask.

D:

Interface identity and next-hop IP appear elsewhere in the routing line.

Question 436

The routing table shows `S 10.24.0.0/16 [1/0] via 192.0.2.20`. What does the zero in [1/0] represent?

  1. The prefix length /0
  2. The destination VLAN number
  3. The displayed metric/cost field of the static route
  4. A missing next hop

Explanation

Correct Answer

C:

The IOS bracket order is administrative distance first, then metric; 1 is AD and 0 is metric.

Incorrect Answers

A:

The route prefix is /16, not /0.

B:

No VLAN identifier is encoded in the route metric brackets.

D:

The via field explicitly lists a next-hop address.

Question 437

A router has `O 192.0.2.0/25 [110/12] via 198.51.100.1` and `S* 0.0.0.0/0 [1/0] via 198.51.100.9`. Which route is used for destination 192.0.2.200?

  1. The OSPF 192.0.2.0/25 route
  2. Both routes equally because they share a routing table
  3. A local /32 host route to 192.0.2.200 is automatically created
  4. The static default via 198.51.100.9

Explanation

Correct Answer

D:

192.0.2.200 lies outside 192.0.2.0/25, so the /0 default is the remaining matching route.

Incorrect Answers

A:

The /25 only covers .0 through .127, so .200 is not a match.

B:

Equal-cost multipath cannot combine different prefixes for this unmatched /25 destination.

C:

Local routes are created for the router’s own configured addresses, not every remote destination.

Question 438

An engineer needs to discover which route entry a router would use for destination 10.50.5.73 without manually scanning a long table. Which operational command is suitable?

  1. `show ip ospf neighbor`
  2. `show mac address-table dynamic`
  3. `show ip route 10.50.5.73`
  4. `show ip dhcp binding`

Explanation

Correct Answer

C:

This IOS route lookup displays the route selected for the supplied destination address, revealing the matched prefix and next-hop.

Incorrect Answers

A:

An OSPF neighbor listing does not perform a forwarding route lookup for the given address.

B:

MAC learning output is a Layer 2 switching table, not the IPv4 routing lookup.

D:

DHCP lease records do not identify the route chosen for an arbitrary destination.

Question 439

A route table contains `C 10.2.0.0/24`, `S 10.3.0.0/24`, and `O 10.4.0.0/24`. Which prefix came from a human-configured static route?

  1. 10.4.0.0/24
  2. 10.2.0.0/24
  3. 10.3.0.0/24, marked S
  4. All three were necessarily configured through ip route

Explanation

Correct Answer

C:

S is the IOS code for a static route, while C and O indicate connected and OSPF respectively.

Incorrect Answers

A:

Its O code means OSPF learned it.

B:

Its C code means it is directly connected.

D:

The route-source codes explicitly distinguish automatic and manually configured sources.

Question 440

A router has S* 0.0.0.0/0 via 192.0.2.10 and S 192.0.2.200/32 via 192.0.2.20. Which route is used when accessing exactly 192.0.2.200?

  1. The /0 route via 192.0.2.10 because it is starred
  2. Both routes because they are statically defined
  3. The /32 host route via 192.0.2.20
  4. No route because static routes cannot match documentation addresses

Explanation

Correct Answer

C:

The host route matches 32 bits, outranking the catch-all /0 default.

Incorrect Answers

A:

Asterisk denotes candidate default rather than longest prefix.

B:

Different-length matching prefixes do not form equal-cost choices.

D:

Documentation IPs are valid example route destinations in a lab table.