McAfee-Secured Website

Exam Bundle

Exam Code: 200-301

Exam Name Cisco Certified Network Associate (CCNA)

Certification Provider: Cisco

Corresponding Certification: CCNA

Cisco 200-301 Bundle $44.99

100% Cisco 200-301 Guaranteed Success With Testking Training Materials

Get Real 200-301 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    200-301 Questions & Answers

    760 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 200-301 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 200-301 Video Course

    200-301 Video Course

    271 Video Lectures

    200-301 Video Course is developed by Cisco Professionals to help you pass the 200-301 exam.

    Description

    This course will improve your knowledge and skills required to pass Cisco Certified Network Associate (CCNA) exam.
  • Study Guide

    200-301 Study Guide

    1969 PDF Pages

    Developed by industry experts, this 1969-page guide spells out in painstaking detail all of the information you need to ace 200-301 exam.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    760 Questions

    $124.99
  • 200-301 Video Course

    Video Course

    271 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1969 PDF Pages

    $29.99

Cisco 200-301 Practice Test 21

Question 200

A VM migrates from switch port Gi1/0/4 to Gi1/0/9 and begins sending traffic there. What should happen to its learned MAC entry?

  1. Age out an inactive dynamic MAC table entry
  2. Flood a broadcast frame across forwarding ports of its VLAN
  3. Update the MAC table when a source MAC appears on another port
  4. Forward a known-unicast frame only toward the learned destination port

Explanation

Correct Answer

C:

The switch updates the source-MAC port association on receiving frames from the new location.

Incorrect Answers

A:

Dynamic MAC entries expire when not refreshed so obsolete location mappings are removed.

B:

Layer 2 broadcasts are delivered to all relevant forwarding ports in the same broadcast domain.

D:

A known destination MAC allows selective unicast forwarding toward its recorded egress port.

Question 201

SW2 connects a new workstation at a warehouse distribution floor to port Gi1/0/1. VLAN 10 already exists and the host sends ordinary untagged frames. Which interface configuration meets the requirement?

  1. interface GigabitEthernet1/0/1; switchport mode trunk; switchport access vlan 10
  2. interface GigabitEthernet1/0/1; switchport mode access; switchport access vlan 10
  3. interface GigabitEthernet1/0/1; shutdown; switchport access vlan 10
  4. interface GigabitEthernet1/0/1; switchport mode access; switchport access vlan 200

Explanation

Correct Answer

B:

An access-mode port forwards untagged host traffic in the selected data VLAN.

Incorrect Answers

A:

Trunk mode is intended for VLAN-tagged interswitch or multi-VLAN links, not a single ordinary workstation access port.

C:

The shutdown command disables the port and prevents connectivity even if VLAN membership is correct.

D:

This command assigns the port to another VLAN, not the one required by the user.

Question 202

An IP phone with a PC connected behind it needs voice VLAN 207 and data VLAN 27 on one access switch port at an enterprise data center. What switchport command feature is necessary?

  1. switchport voice vlan 207 alongside switchport access vlan 27
  2. switchport access vlan 207 with no separate voice VLAN
  3. switchport trunk allowed vlan 207 and no data access VLAN
  4. no switchport on the user access port

Explanation

Correct Answer

A:

A voice VLAN carries the tagged phone voice traffic while the port retains the normal data access VLAN for the attached PC.

Incorrect Answers

B:

Changing the data VLAN to the voice VLAN does not preserve separate data and voice placement.

C:

A raw trunk setting without correct phone access/voice behavior fails the requested edge configuration.

D:

Routed-port mode removes ordinary VLAN access switching for the phone/PC port.

Question 203

At a disaster-recovery location, ACCESS2 is a Layer 3 switch. Hosts in VLAN 44 need the gateway 10.44.3.1/24 and IP routing is not yet enabled. Which configuration concept is required?

  1. interface GigabitEthernet1/0/2; switchport access vlan 44; no ip routing
  2. interface Vlan214; ip address 10.44.3.1 255.255.255.0; no shutdown; ip routing
  3. interface Vlan44; shutdown; ip routing
  4. interface Vlan44; ip address 10.44.3.1 255.255.255.0; no shutdown; ip routing

Explanation

Correct Answer

D:

An enabled SVI and global Layer 3 switching allow the switch to act as a gateway for hosts in that VLAN.

Incorrect Answers

A:

An access switchport alone does not enable inter-VLAN routing or assign the VLAN gateway IP.

B:

Creating an SVI for another VLAN does not provide the gateway for the intended VLAN.

C:

A shutdown SVI is not operational, preventing the local VLAN gateway from serving clients.

Question 204

BR-RT is a router connected via an 802.1Q trunk carrying user VLAN 61 at a regional healthcare office; the VLAN needs gateway 172.18.61.1/24. What router-on-a-stick configuration is correct?

  1. interface GigabitEthernet0/0; switchport access vlan 61
  2. interface GigabitEthernet0/0.61; shutdown; encapsulation dot1Q 61
  3. interface GigabitEthernet0/0.61; encapsulation dot1Q 221; ip address 172.18.61.1 255.255.255.0
  4. interface GigabitEthernet0/0.61; encapsulation dot1Q 61; ip address 172.18.61.1 255.255.255.0

Explanation

Correct Answer

D:

Router-on-a-stick uses a per-VLAN router subinterface with matching 802.1Q encapsulation and an IP gateway.

Incorrect Answers

A:

A routed router interface does not support the switchport access-mode syntax as a VLAN subinterface gateway.

B:

A disabled subinterface cannot route the VLAN traffic.

C:

The VLAN tag configured on the subinterface must match the traffic VLAN.

Question 205

The switch accepts switchport access vlan 78 but show vlan brief does not list VLAN 78, and the host cannot communicate with peers. What change is necessary?

  1. Configure only an IP static route to 192.0.2.0/24
  2. Create VLAN 78 on the switch VLAN database and assign the target access port to VLAN 78
  3. Set the access port native VLAN to 78 but never create the VLAN
  4. Disable VLAN 78 and put the host in VLAN 1

Explanation

Correct Answer

B:

An access port can forward in its intended VLAN only if that VLAN exists and is active on the switch.

Incorrect Answers

A:

A Layer 3 route does not instantiate a Layer 2 VLAN on the local switch.

C:

The native VLAN is a trunk attribute and does not create an absent access VLAN.

D:

Removing the intended VLAN contradicts the required Layer 2 segmentation.

Question 206

Two same-subnet PCs at a hospitality property are attached to different access switches and one port is in VLAN 95 while the other is in VLAN 235. No Layer 3 inter-VLAN gateway is configured. Which correction restores expected same-VLAN connectivity?

  1. Assign one switchport to a routed port and give it no IP address
  2. Keep one peer in VLAN 95 and the other in VLAN 235 with no Layer 3 gateway
  3. Configure only spanning-tree portfast on both ports
  4. Place both peer host ports in access VLAN 95 and verify that VLAN is active end to end

Explanation

Correct Answer

D:

Hosts within the same Layer 2 IP segment need a consistent broadcast domain unless routed connectivity is explicitly used.

Incorrect Answers

A:

An unnumbered routed port does not establish the shared VLAN demanded by this case.

B:

Different isolated VLANs require Layer 3 routing to communicate, even if the hosts have similar address forms.

C:

PortFast changes edge STP transition behavior; it does not bridge unrelated VLANs.

Question 207

At a remote field office, hosts in VLAN 112 can reach same-subnet peers but cannot reach another VLAN. The L3 switch is designated to route between VLANs. What additional interface function is required?

  1. Use VLAN 112 as a DNS hostname and do not configure a gateway
  2. Configure only a Layer 2 access port and no routed gateway
  3. Use a routed SVI interface Vlan112 as the default gateway for hosts in VLAN 112
  4. Set a host default gateway to an address in VLAN 242 across a nonrouted link

Explanation

Correct Answer

C:

An IP gateway in the host subnet must route packets to other subnets; an SVI is a common solution on multilayer switches.

Incorrect Answers

A:

VLAN identifiers do not provide DNS service or IP forwarding.

B:

A pure access VLAN cannot route destinations outside the local IP subnet.

D:

An unreachable default gateway in another isolated VLAN cannot serve the host.

Question 208

SW1 has SVIs in VLANs 129 and 249, each assigned an IP, but traffic still cannot cross VLANs. Which Layer 3 switch prerequisites must be checked?

  1. Change all user ports to VLAN 1 and remove the routed SVIs
  2. Verify a Layer 3 switch has ip routing enabled and the SVIs for VLANs 129 and 249 are up
  3. Configure one switchport as a trunk to a PC without any L3 gateway
  4. Disable ip routing because SVIs route traffic automatically without it

Explanation

Correct Answer

B:

Inter-VLAN routing requires active routed interfaces and the Layer 3 forwarding feature on the switch.

Incorrect Answers

A:

Flattening VLANs abandons the explicit segmentation and routed design.

C:

Trunking a single PC does not replace gateway forwarding.

D:

Without global routing enabled, multiple SVI IPs alone do not necessarily provide IP forwarding between VLANs.

Question 209

An administrator adds VLAN 16 to a new switch but has not configured any individual access port assignments. Which statement about default access VLAN membership is correct?

  1. Assume every unconfigured access port joins the newest created VLAN
  2. Enable routed mode on every user port to inherit VLAN memberships
  3. Keep the default VLAN separate from newly created user VLANs and explicitly assign access ports as needed
  4. Treat VLAN 1 as untagged voice VLAN on all ports after a new VLAN is created

Explanation

Correct Answer

C:

Creating a VLAN does not change the membership of unrelated switch ports; default access membership remains VLAN 1 until configured.

Incorrect Answers

A:

Unconfigured access ports generally remain assigned to the default VLAN, not whichever was created last.

B:

Routed ports do not inherit switch access VLAN membership.

D:

Voice and native VLAN operation cannot be inferred from creating a new data VLAN.

Question 210

An access switch carries VLAN 62 to a lab printer. The old port Gi1/0/12 is configured as a trunk; the printer sends only untagged frames and must not see any other VLAN. Which change most directly enforces the design?

  1. Set Gi1/0/12 to switchport mode access and switchport access vlan 62
  2. Keep trunk mode and permit VLANs 1-4094
  3. Configure switchport voice vlan 62 alone
  4. Configure the switch management SVI with VLAN 62

Explanation

Correct Answer

A:

An access interface places untagged printer frames into only VLAN 62 and is not negotiating a trunk.

Incorrect Answers

B:

A trunk potentially transports many VLANs and does not restrict this endpoint to one access VLAN.

C:

The auxiliary voice VLAN is intended for phone tagging and does not assign the untagged printer data VLAN.

D:

An SVI address does not replace the physical port’s Layer 2 VLAN membership.