McAfee-Secured Website

Exam Code: 156-315.82

Exam Name: Check Point Certified Security Expert - R82 (CCSE)

Certification Provider: Checkpoint

Corresponding Certification: CCSE R82

Questions & Answers

100% Checkpoint 156-315.82 Guaranteed Success With Testking Training Materials

Get Real 156-315.82 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

Questions & Answers

100 Questions & Answers with Testing Engine

"Check Point Certified Security Expert - R82 (CCSE) Exam", also known as 156-315.82 exam, is a Checkpoint certification exam.

Pass your tests with the always up-to-date 156-315.82 Exam Engine. Your 156-315.82 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Checkpoint 156-315.82 Practice Test 6

Question 50

A change was made inside a SmartConsole session on the Active management member, but nobody published that session. The Standby does not reflect the proposed object, although peer synchronization is healthy. What behavior best explains why the Standby lacks the edit?

  1. Use Management HA revision-based synchronization for published changes
  2. Use Management High Availability database synchronization
  3. Initiate a manual synchronization between management peers
  4. Open the Management High Availability status in SmartConsole

Explanation

Correct Answer

A:

Management HA replicates published revisions; changes that remain private in an unpublished session are not synchronized to the standby database.

Incorrect Answers

B:

General database synchronization does not include unpublished private session data.

C:

Manually syncing an unchanged published revision cannot transfer unpublished edits.

D:

Inspecting HA status can confirm peer health, but it cannot publish an administrator's still-private SmartConsole session.

Question 51

A network policy currently allows an overly broad address range for a SaaS destination. The service provider publishes a maintained list and analysts want the rule to follow its changing service addresses. Which supported R82 object placement is most precise?

  1. Import the Updatable Object into a Destination column
  2. Place an Updatable Object in the Access Control Source column
  3. Use an Updatable Object in Protected Scope
  4. Use an Updatable Object as source or destination of an HTTPS rule

Explanation

Correct Answer

A:

Import the provider Updatable Object into the Access Control Destination column of the intended rule.

Incorrect Answers

B:

Putting the object in Source would classify originating clients rather than the intended SaaS destination.

C:

Protected Scope belongs to the Threat Prevention use case, not this Access Control destination match.

D:

An HTTPS Inspection rule is a different policy layer and does not replace the Access Control destination.

Question 52

A Check Point-managed branch tunnel stays idle for hours, so operators do not notice it fails until new application traffic arrives. The organization needs continuous gateway-to-gateway tunnel health and prompt alerting. What tunnel-management choice addresses this?

  1. Enable permanent-tunnel tracking or alert behavior
  2. Select the particular tunnel in community Tunnel Management
  3. Configure the appropriate Permanent Tunnel setting
  4. Use interoperable IKE Dead Peer Detection for supported permanent-tunnel monitoring

Explanation

Correct Answer

C:

Configure the intended permanent tunnel so supported gateway-to-gateway health checks continue even when user traffic is idle.

Incorrect Answers

A:

Tracking can report a failure only after the intended tunnel is configured to stay monitored.

B:

Marking a single unrelated tunnel permanent does not cover the specified branch path.

D:

DPD is particularly relevant for third-party peers; the scenario describes managed Check Point gateways.

Question 53

The SOC needs to inspect real-time Check Point logs from an analyst workstation where installing SmartConsole is prohibited. HTTPS access to the relevant management or event server is allowed. Which supported client can provide the views?

  1. Open Logs & Events and select Views
  2. Build a customizable view in SmartView or Logs & Events
  3. Access SmartView on the appropriate server web endpoint
  4. Open Logs & Events and select Reports

Explanation

Correct Answer

C:

Open the SmartView web application on the applicable server rather than installing SmartConsole locally.

Incorrect Answers

A:

SmartConsole Views assumes access to the installed client prohibited by workstation policy.

B:

A customizable SmartConsole view does not remove the desktop-client restriction.

D:

A stored report is a static summary, not the requested live web analysis.

Question 54

Central Deployment reports that a Jumbo installation completed on the selected gateway. The ticket requires evidence of the exact resulting package level, not only the absence of errors in the SmartConsole Tasks panel. What acceptance evidence is relevant?

  1. Select gateways in SmartConsole and Install Hotfix/Jumbo
  2. Use the Install Hotfix/Jumbo deployment action
  3. Back up the appliance and confirm the target package is supported
  4. Review the package installation and gateway version result

Explanation

Correct Answer

D:

Inspect the installed package/version result on the gateway and confirm it matches the approved hotfix baseline.

Incorrect Answers

A:

Re-running Install Hotfix/Jumbo is unnecessary and may change the installed package.

B:

Initiating another hotfix action is not evidence of the version already installed.

C:

A pre-upgrade backup does not establish the post-install package level.

Question 55

A Security Management Server must be replaced with a new machine while retaining its policies, objects and database. The target will receive a clean supported R82 installation, rather than updating the source host in place. Which documented workflow matches this topology?

  1. Choose management database migration rather than gateway policy reinstall
  2. Use Upgrade with Migration for new-server clean-install cutover
  3. Export the management database before upgrading and re-import afterward
  4. Invoke migrate_server export from the prescribed scripts directory

Explanation

Correct Answer

B:

Use Upgrade with Migration: export the current management database, clean-install the separate target, then import the archive.

Incorrect Answers

A:

Choosing a generic database-preserving approach does not specify the clean separate-host migration steps.

C:

Advanced in-place upgrade changes the source host and is not the requested new-server migration.

D:

Running only migrate_server export does not complete the required clean-install/import workflow.

Question 56

An ElasticXL cluster is functioning and an engineer proposes switching SecureXL from Kernel Mode and manually fixing CoreXL instance counts to improve throughput. The R82 setup guide warns against both changes. What operating configuration should remain?

  1. Use Gaia gClish for global cluster commands
  2. Keep SecureXL in Kernel Mode (KPPAK) and retain default CoreXL Dynamic Balancing
  3. Do not add or remove an unassigned Sync-bond interface casually
  4. Expect the SMO to accept and distribute traffic to members

Explanation

Correct Answer

B:

Keep SecureXL in KPPAK Kernel Mode and preserve default CoreXL Dynamic Balancing rather than forcing unsupported manual instance tuning.

Incorrect Answers

A:

Using Gaia gClish is an administration context, not permission to replace required acceleration mode.

C:

Changing Sync bond flags risks detection disruption and cannot make the proposed performance change supported.

D:

SMO traffic distribution does not authorize disabling the required acceleration configuration.

Question 57

The Active R82 Management Server fails and is confirmed offline. The Standby is synchronized and reachable by administrators. Security Gateways continue using the installed policy, but urgent management changes are required. Which management HA action restores a writable control plane?

  1. Initiate a manual synchronization between management peers
  2. Use Management HA actions to set one server to Standby
  3. Initiate changeover so a healthy standby becomes Active
  4. Back up or snapshot all HA servers at the same point in time

Explanation

Correct Answer

C:

Initiating a controlled changeover promotes the synchronized standby to Active so management operations can resume.

Incorrect Answers

A:

Manual peer synchronization is not possible while the active peer is offline.

B:

A collision-mode corrective action is unnecessary when only the standby remains reachable.

D:

Creating backups protects data, but does not promote the surviving Standby management member to a writable Active role.

Question 58

Only HTTPS traffic from a specified partner to one hosted service should have its destination TCP port rewritten; SSH to the same address must not be translated. The NAT object matches both sources currently. How should the administrator prevent unintended port changes?

  1. Match Original Services and set corresponding Translated Services
  2. Create a Manual NAT rule with both translated fields
  3. Use the Translated Services column in a Manual NAT rule
  4. Place the intended matching rule first in the NAT rule order

Explanation

Correct Answer

A:

Specify the applicable Original Services match and Translated Services in the Manual NAT rule, limiting the port change to selected traffic.

Incorrect Answers

B:

A rule translating both IP addresses does not by itself restrict which service ports match.

C:

Adding only a translated service without narrowing Original Services risks changing unrelated protocols.

D:

Reordering broad address rules cannot substitute for explicit service matching.

Question 59

A mesh VPN community contains twelve managed gateways. Only one critical pair must maintain continuous tunnel health; other peer tunnels should remain demand-driven to limit overhead. Where should permanent-tunnel monitoring be scoped?

  1. Apply the permanent-tunnel setting to the entire community
  2. Configure the appropriate Permanent Tunnel setting
  3. Select the particular tunnel in community Tunnel Management
  4. Enable permanent-tunnel tracking or alert behavior

Explanation

Correct Answer

C:

Select the single required tunnel in the community Tunnel Management settings instead of making every peer relationship permanent.

Incorrect Answers

A:

Community-wide permanent monitoring would include the other eleven relationships unnecessarily.

B:

Enabling a generic permanent setting without choosing the critical tunnel does not express the scope.

D:

Tracking behavior is not the mechanism for selecting which tunnel must stay permanent.

Question 60

Compliance reviewers ask why a managed gateway’s security rulebase fails specific Check Point best practices. Analysts have only log searches and cannot see configuration-grade rule findings. What management capability should be enabled for the assessment?

  1. Review Regulatory Compliance requirements and scores
  2. Activate the Compliance Software Blade
  3. Generate a Compliance Blade report in the Reports view
  4. Open Logs & Events and select Views

Explanation

Correct Answer

B:

Enable the Compliance Software Blade to assess configured policy against best-practice and regulatory rule requirements.

Incorrect Answers

A:

Viewing regulatory scores assumes the underlying compliance analysis capability is available.

C:

Exporting a static compliance report cannot generate policy-best-practice findings when the underlying analysis blade is disabled.

D:

A log Views filter analyzes events, not security best-practice rulebase compliance.

Check Point Certified Security Expert - R82 (CCSE) (156-315.82) Practice Tests