McAfee-Secured Website

Exam Code: 156-315.82

Exam Name: Check Point Certified Security Expert - R82 (CCSE)

Certification Provider: Checkpoint

Corresponding Certification: CCSE R82

Questions & Answers

100% Checkpoint 156-315.82 Guaranteed Success With Testking Training Materials

Get Real 156-315.82 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

Questions & Answers

100 Questions & Answers with Testing Engine

"Check Point Certified Security Expert - R82 (CCSE) Exam", also known as 156-315.82 exam, is a Checkpoint certification exam.

Pass your tests with the always up-to-date 156-315.82 Exam Engine. Your 156-315.82 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Checkpoint 156-315.82 Practice Test 4

Question 30

An Access Control rule refers to an Updatable Object representing a cloud provider. A provider adds addresses overnight and the gateway updates its membership without a SmartConsole policy-install task. Why should operators not schedule a reinstall for every address change?

  1. Let the Updatable Object update on the Security Gateway
  2. Use an Updatable Object based on the service address feed
  3. Reference the object directly in eligible policy rule columns
  4. Publish the session and install the relevant security policy

Explanation

Correct Answer

A:

The gateway refreshes membership from published lists automatically; normal feed changes do not require a new policy installation.

Incorrect Answers

B:

Creating a new service object for each provider update defeats the Updatable Object mechanism.

C:

Using eligible policy columns is required initially, but does not explain per-update installation behavior.

D:

An additional unchanged policy install is not the membership-refresh mechanism.

Question 31

IKE succeeds and both gateways show a security association, but one newly added internal subnet cannot cross the tunnel while older subnets work. Firewall logs show traffic sent outside the expected selectors. What configuration pair should be checked first?

  1. Review IKE negotiation settings and authentication on both peers
  2. Configure the gateway Link Selection settings
  3. Review Service Based Link Selection policies
  4. Verify VPN domain definitions and encryption-domain selectors

Explanation

Correct Answer

D:

Check both peers’ VPN domains and encryption-domain selectors for the added subnet before changing unrelated IKE settings.

Incorrect Answers

A:

Phase-one authentication already passed and is not the narrow cause of a missing protected subnet.

B:

Changing the local egress IP does not insert a missing subnet into traffic selectors.

C:

Service-Based Link Selection controls VPN egress based on services, not missing encryption-domain selectors for the new subnet.

Question 32

Repeated high-confidence malware events require an approved automatic response after correlation succeeds. The detection filter, threshold and severity are correct. Analysts currently receive a report but no response action occurs. Which SmartEvent configuration should be reviewed?

  1. Assign appropriate SmartEvent event severity
  2. Configure the relevant SmartEvent alert reaction
  3. Assign an Automatic Reaction to its event definition
  4. Define a User-Defined Event and its filters

Explanation

Correct Answer

C:

Assign the appropriate Automatic Reaction to the event definition so the correlated event can invoke the approved response.

Incorrect Answers

A:

Changing severity ranks the event but does not define a response action.

B:

A notification alert informs an operator; it is not necessarily the requested automatic response.

D:

Creating another event definition does not configure a reaction for the existing event.

Question 33

Security operations needs to upgrade a fleet of managed, supported Security Gateways from SmartConsole. The corresponding management server is already on the required version and the environment meets Central Deployment prerequisites. Which workflow does Check Point recommend over ad-hoc local upgrades?

  1. Use CPUSE with the applicable local/cloud package source
  2. Run the Central Deployment Tool from the Management Server
  3. Use SmartConsole Central Deployment where supported
  4. Use Advanced Upgrade or migration rather than gateway CDT

Explanation

Correct Answer

C:

Use SmartConsole Central Deployment to coordinate supported remote gateway upgrades from the Management Server.

Incorrect Answers

A:

Running CPUSE locally on every gateway is possible, but does not use the recommended central workflow requested.

B:

The legacy deployment tool location is a different workflow, not the preferred SmartConsole action.

D:

Advanced management database migration handles management-server contents and is not the recommended remote gateway rollout mechanism.

Question 34

A security management upgrade from an older supported release has been approved, but the migration precheck reports an invalid object name as an error. The team proposes proceeding because export completed. What should happen before the actual upgrade?

  1. Repair reported issues and rerun the verifier
  2. Invoke migrate_server export from the prescribed scripts directory
  3. Use Upgrade with Migration for new-server clean-install cutover
  4. Run and review the documented Pre-Upgrade Verifier where applicable

Explanation

Correct Answer

D:

Review the Pre-Upgrade Verifier findings and resolve blocking errors before running the production migration.

Incorrect Answers

A:

Rerunning the verifier is useful only after the reported database issue has been repaired.

B:

The export tool is not permission to ignore a blocking compatibility error.

C:

Selecting migration as a method does not eliminate the verifier’s explicit action item.

Question 35

A geographically separate second R82 ElasticXL Site has been planned for availability. The newly powered member appears under Pending Gateways and the existing first site must remain unchanged. Which membership operation implements the intended two-site architecture?

  1. Create a new Site while admitting the pending appliance
  2. Add the pending appliance to the existing Site
  3. Use Gaia Portal Cluster Management > Pending Gateways
  4. Add supported members through ElasticXL admission and cloning

Explanation

Correct Answer

A:

Create a new ElasticXL Site when admitting the pending member rather than adding it to the existing site.

Incorrect Answers

B:

Adding capacity inside site one does not establish an independent second site.

C:

Merely opening Pending Gateways does not select a new site destination.

D:

Generic scale-out of the existing cluster does not specify the required second-site placement.

Question 36

A security administrator is locked on the Standby R82 Management Server after repeated failed logins, but the Active server has no lock entry for that user. Clearing the account on Active has no effect. Which supported procedure should the team use for this node-local lock?

  1. Test Secure Internal Communication between the HA peers
  2. Initiate changeover so a healthy standby becomes Active
  3. Open the Management High Availability status in SmartConsole
  4. Run the unlock-administrator API action on that Standby Server

Explanation

Correct Answer

D:

Issue unlock-administrator against the Standby Management Server where the lock exists; Active cannot clear a lock recorded only on standby.

Incorrect Answers

A:

SIC tests peer trust, not the administrator lock held locally on standby.

B:

HA changeover is disruptive and not required to release a standby-local administrator lock.

C:

Opening HA status does not execute the API unlock on the affected node.

Question 37

An Updatable Object already exists in a Threat Prevention policy, but its service-address membership has stopped refreshing. The management server and gateway share the correct policy; the provider remains listed. Which connectivity prerequisite should be tested first?

  1. Use an Updatable Object in Protected Scope
  2. Verify Management Server and Gateway reachability to Check Point cloud
  3. Search Logs & Events for the named object and status Succeeded
  4. Publish the session and install the relevant security policy

Explanation

Correct Answer

B:

Both the Management Server and Gateway need appropriate connectivity to the Check Point cloud for Updatable Object updates.

Incorrect Answers

A:

Changing Protected Scope does not restore cloud-feed connectivity that has failed.

C:

Searching logs can show failures but is not the missing network prerequisite.

D:

Policy installation is not a substitute for the cloud connectivity required to retrieve feeds.

Question 38

A fixed-address R82 gateway has two external ISP links to a cloud IPsec peer. It is not ElasticXL, DAIP, Spark or LSV. The cloud vendor requires independent standard tunnels and failover without Check Point proprietary RDP. Which feature is designed for this deployment?

  1. Configure Link Selection probing and redundant paths
  2. Configure the gateway Link Selection settings
  3. Configure supported Enhanced Link Selection interfaces and redundancy for the cloud peer
  4. Configure VPN Load Sharing through Link Selection when supported

Explanation

Correct Answer

C:

Enhanced Link Selection provides standard per-interface tunnels and third-party/cloud redundancy on supported gateways, using DPD for path health.

Incorrect Answers

A:

Legacy redundant path probing does not fully provide the stated standard multihomed cloud interoperability.

B:

Basic egress address selection alone does not implement enhanced per-interface redundancy.

D:

Load sharing without selecting the supported Enhanced Link Selection mode misses the interoperability requirement.

Question 39

An access alert triggers during routine approved overnight maintenance, but the compliance team only wants alerts for unauthorized out-of-hours login activity. The event should use an explicit schedule instead of continually changing thresholds. What SmartEvent control fits the condition?

  1. Configure a SmartEvent threshold of log count and seconds
  2. Configure a Time Object for the event definition
  3. Adjust its event threshold after examining the event
  4. Configure a suitable event exception or exclusion

Explanation

Correct Answer

B:

Associate an appropriate Time Object with the event definition to restrict matching to the defined time window.

Incorrect Answers

A:

Changing the count threshold does not express the maintenance schedule.

C:

Generic event threshold tuning adjusts frequency or counts but does not encode the intended maintenance-time schedule.

D:

An exception may suppress one known case, but cannot replace an intended time-based detection policy.

Question 40

A planned R82 transition concerns the Security Management Server database rather than a remote Security Gateway. The administrator proposes selecting the management server as a CDT gateway target. Which supported component-specific upgrade family should be reviewed?

  1. Run the Central Deployment Tool from the Management Server
  2. Use the Version Upgrade action on the selected gateway
  3. Choose a documented management Upgrade or Migration method
  4. Use supported Central Deployment parallel target selection

Explanation

Correct Answer

C:

Use the management-server CPUSE, advanced upgrade, or migration method applicable to the current and target versions.

Incorrect Answers

A:

Running a gateway deployment tool from management does not make management databases a CDT gateway target.

B:

The gateway Version Upgrade menu is not the management database upgrade procedure.

D:

Batch deployment across gateway targets does not replace an appropriate management-server database migration or upgrade.

Check Point Certified Security Expert - R82 (CCSE) (156-315.82) Practice Tests