McAfee-Secured Website

Exam Code: 156-315.82

Exam Name: Check Point Certified Security Expert - R82 (CCSE)

Certification Provider: Checkpoint

Corresponding Certification: CCSE R82

Questions & Answers

100% Checkpoint 156-315.82 Guaranteed Success With Testking Training Materials

Get Real 156-315.82 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

Questions & Answers

100 Questions & Answers with Testing Engine

"Check Point Certified Security Expert - R82 (CCSE) Exam", also known as 156-315.82 exam, is a Checkpoint certification exam.

Pass your tests with the always up-to-date 156-315.82 Exam Engine. Your 156-315.82 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Checkpoint 156-315.82 Practice Test 54

Question 530

A Check Point gateway still runs R80.30 and the change ticket requests R82 directly. The team has not confirmed whether this source version can follow a single upgrade step, and the package is not yet installed. An alternate diagnosis concerns the requirement to identify a management upgrade that includes database export/import, for which a colleague suggests use Advanced Upgrade or migration rather than gateway CDT. Based on the recorded symptoms, which corrective step should have priority?

  1. Use CPUSE for a compatible management-server in-place upgrade
  2. Use Advanced Upgrade or migration rather than gateway CDT
  3. Run the Central Deployment Tool from the Management Server
  4. Consult the R82 supported upgrade methods by component type

Explanation

Correct Answer

D:

Upgrade method support differs for gateways and management servers. This directly addresses the documented incident evidence.

Incorrect Answers

A:

CPUSE supports management in-place upgrade workflows, yet that applies to perform a management in-place upgrade with supported tooling rather than the observed issue.

B:

Management upgrading can require exporting and importing database content, but the current evidence calls for a different R82 operation.

C:

CDT uses the Management Server to deploy to gateways; this does not resolve the observed condition.

Question 531

The replacement R82 Management Server has successfully imported the database and passed integrity checks, but it remains on an isolated staging VLAN. Production gateways must now reach its intended management address. A preliminary suggestion is to use Upgrade with Migration for new-server clean-install cutover. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Use Upgrade with Migration for new-server clean-install cutover
  2. Plan control-plane addressing and reconnect managed gateways correctly
  3. Connect the new management host on the intended network
  4. Disconnect the retired source before activating its replacement

Explanation

Correct Answer

C:

The new server needs appropriate network connectivity to manage gateways. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Migration exports management state and imports to a separate target, but the current evidence calls for a different R82 operation.

B:

A migration needs correct management connectivity and trusted identity, yet that applies to preserve management server identity and reachability through cutover rather than the observed issue.

D:

Controlled cutover prevents conflicting management authorities; this does not resolve the observed condition.

Question 532

An R82 ElasticXL cluster has one existing site with healthy SMO and two members. A newly discovered appliance is intended solely to add capacity to this same site, not create geographical redundancy. The controls that address the separate requirement to add a second ElasticXL Site for availability are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Remove it then add as a pending member to the target site
  2. Add the pending appliance to the existing Site
  3. Expect the SMO to accept and distribute traffic to members
  4. Create a new Site while admitting the pending appliance

Explanation

Correct Answer

B:

Adding to the existing site enables supported load sharing. This directly addresses the documented incident evidence.

Incorrect Answers

A:

The documented workflow removes and re-adds a node to the chosen site, yet that applies to move a cluster member from one site to another rather than the observed issue.

C:

The SMO handles distribution to other site members; this does not resolve the observed condition.

D:

A new site is used to establish High Availability sites, but the current evidence calls for a different R82 operation.

Question 533

Two management servers each became Active during a link failure. An administrator proposes clicking Set Standby immediately on one node, but it holds unpublished rule changes absent from the other peer. The controls that address the separate requirement to correct a collision where both Management Servers report Active are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Use Management HA actions to set one server to Standby
  2. Initiate changeover so a healthy standby becomes Active
  3. Review which database will be overwritten when setting Standby
  4. Use the Active Management Server for write operations

Explanation

Correct Answer

C:

Demoting a server to Standby overwrites its data from the Active peer. This directly addresses the documented incident evidence.

Incorrect Answers

A:

One Active server is required for a consistent normal HA state, but the current evidence calls for a different R82 operation.

B:

A controlled management changeover restores an Active management server, yet that applies to recover administration when the active management node goes offline rather than the observed issue.

D:

Only the Active server accepts normal management changes; this does not resolve the observed condition.

Question 534

An internal application is published through an additional public IP using Manual NAT. The NAT and Access Control rules are installed, but upstream hosts on the gateway LAN cannot resolve the translated address to a MAC. The controls that address the separate requirement to apply different port translation only to selected services are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Configure required Proxy ARP entries for the translated address
  2. Match Original Services and set corresponding Translated Services
  3. Create translated objects, NAT rule, and matching Access Control rule
  4. Create a Manual NAT rule with both translated fields

Explanation

Correct Answer

A:

Manual NAT deployments require Proxy ARP where applicable. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Manual NAT can restrict rules by service and translated port, but the current evidence calls for a different R82 operation.

C:

Manual NAT workflows also require valid translated objects and access, yet that applies to publish a server using a manually translated address rather than the observed issue.

D:

Manual NAT allows simultaneous source and destination translation; this does not resolve the observed condition.

Question 535

A mesh VPN community has five managed Check Point gateways and operations wants every eligible inter-gateway tunnel monitored as permanent. A colleague configured permanence for only one named pair. A preliminary suggestion is to use interoperable IKE Dead Peer Detection for supported permanent-tunnel monitoring. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Use interoperable IKE Dead Peer Detection for supported permanent-tunnel monitoring
  2. Apply the permanent-tunnel setting to the entire community
  3. Enable permanent-tunnel tracking or alert behavior
  4. Use periodic tunnel-test responses to determine up status

Explanation

Correct Answer

B:

Community-level settings can mark all eligible tunnels permanent. This directly addresses the documented incident evidence.

Incorrect Answers

A:

R82 Dead Peer Detection supports third-party gateways, while proprietary tunnel-test packets require Check Point peers, but the current evidence calls for a different R82 operation.

C:

Permanent tunnel monitoring can issue logs and alerts on failure, yet that applies to track failure of a monitored permanent VPN tunnel rather than the observed issue.

D:

Test packet responses are the basis for permanent tunnel status; this does not resolve the observed condition.

Question 536

A security analyst modifies a SmartEvent custom detection filter, saves it, and then sees incoming logs still evaluated by the previous version. The gateway Access Control policy is unchanged. A proposed change would be to assign an Automatic Reaction to its event definition, which addresses the different requirement to set an incident response when a specified event occurs. Which action instead addresses the observed incident?

  1. Assign appropriate SmartEvent event severity
  2. Assign an Automatic Reaction to its event definition
  3. Adjust its event threshold after examining the event
  4. Save changes and Install Event Policy

Explanation

Correct Answer

D:

An Event Policy installation activates saved definition changes. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Event definitions include configurable severity where supported, yet that applies to distinguish critical from informational event definitions rather than the observed issue.

B:

Automatic Reactions connect event detection to responses, but the current evidence calls for a different R82 operation.

C:

Tuning event thresholds reduces false-positive correlation; this does not resolve the observed condition.

Question 537

Central Deployment reports that a Jumbo installation completed on the selected gateway. The ticket requires evidence of the exact resulting package level, not only the absence of errors in the SmartConsole Tasks panel. A proposed change would be to use CPUSE with the applicable local/cloud package source, which addresses the different requirement to install packages directly from an appliance on Gaia. Which action instead addresses the observed incident?

  1. Use CPUSE with the applicable local/cloud package source
  2. Use Central Deployment Version Upgrade to Specific Major Version
  3. Use SmartConsole Central Deployment where supported
  4. Review the package installation and gateway version result

Explanation

Correct Answer

D:

Actual installed version proves the deployment target state. This directly addresses the documented incident evidence.

Incorrect Answers

A:

CPUSE performs Gaia software package installation and upgrades, but the current evidence calls for a different R82 operation.

B:

Central Deployment offers target-version selection, yet that applies to move a gateway to a selected supported major version rather than the observed issue.

C:

Central Deployment is the documented gateway best practice; this does not resolve the observed condition.

Question 538

A management database export archive was transferred from the source R82 server to a replacement host. The transfer tool completed without an error but the archive size differs slightly. Import has not started. A proposed change would be to check imported policies, objects, and management settings, which addresses the different requirement to validate R82 database archive contents at the end. Which action instead addresses the observed incident?

  1. Transfer the database export archive in binary mode
  2. Compare checksums of source and copied export files
  3. Export on the source and import on the destination
  4. Check imported policies, objects, and management settings

Explanation

Correct Answer

B:

Matching hashes detect transfer corruption before import. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Binary-mode transfer preserves compressed archive bytes, yet that applies to move export archives between management servers safely rather than the observed issue.

C:

Management migration preserves the database through export/import; this does not resolve the observed condition.

D:

Database content inspection tests the outcome of a migration, but the current evidence calls for a different R82 operation.

Question 539

Two new R82 ElasticXL appliances show healthy data ports but never discover each other during initial cluster creation. Their Sync ports terminate in unrelated access VLANs with no common Layer 2 segment. The controls that address the separate requirement to move a cluster member from one site to another are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Connect Sync ports through dedicated Layer 2 switching or VLAN
  2. Wire data interfaces to traffic networks and Sync ports to sync domain
  3. Remove it then add as a pending member to the target site
  4. Do not add or remove an unassigned Sync-bond interface casually

Explanation

Correct Answer

A:

ElasticXL Sync requires a shared suitable Layer 2 domain. This directly addresses the documented incident evidence.

Incorrect Answers

B:

ElasticXL uses separate data ports and synchronization connectivity, yet that applies to keep data and synchronization links logically separated rather than the observed issue.

C:

The documented workflow removes and re-adds a node to the chosen site, but the current evidence calls for a different R82 operation.

D:

Changing unassigned Sync bond members can reset required flags; this does not resolve the observed condition.

Question 540

During a DR test, the team asks which configuration content is automatically copied between synchronized R82 Management Servers after sessions are published. It considers replacing synchronization with Gaia snapshots of the operating system. A proposed change would be to promote the synchronized standby management database, which addresses the different requirement to protect policies and rule definitions after active-server failure. Which action instead addresses the observed incident?

  1. Promote the synchronized standby management database
  2. Plan management-server redundancy separately from gateway clustering
  3. Retain synchronized objects, rules, and management settings
  4. Open the Management High Availability status in SmartConsole

Explanation

Correct Answer

C:

Management HA keeps management configuration aligned on peers. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Synchronized standby retains management configuration for changeover, but the current evidence calls for a different R82 operation.

B:

Management HA protects the management database and administration, yet that applies to distinguish management HA from dataplane security gateway HA rather than the observed issue.

D:

Management HA status reports peer role and synchronization health; this does not resolve the observed condition.

Check Point Certified Security Expert - R82 (CCSE) (156-315.82) Practice Tests