McAfee-Secured Website

Exam Code: 156-315.82

Exam Name: Check Point Certified Security Expert - R82 (CCSE)

Certification Provider: Checkpoint

Corresponding Certification: CCSE R82

Questions & Answers

100% Checkpoint 156-315.82 Guaranteed Success With Testking Training Materials

Get Real 156-315.82 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

Questions & Answers

100 Questions & Answers with Testing Engine

"Check Point Certified Security Expert - R82 (CCSE) Exam", also known as 156-315.82 exam, is a Checkpoint certification exam.

Pass your tests with the always up-to-date 156-315.82 Exam Engine. Your 156-315.82 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Checkpoint 156-315.82 Practice Test 28

Question 270

A new SmartEvent Correlation Unit starts without detecting multi-gateway incidents, although each Security Gateway forwards logs successfully to its intended Log Server. The correlation unit has not been pointed at those log sources. The controls that address the separate requirement to tune an event after repeated detections in short intervals are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Activate the Compliance Software Blade
  2. Edit the relevant Event Definition threshold
  3. Configure Event Format field display mapping
  4. Point the Correlation Unit at the intended production Log Servers

Explanation

Correct Answer

D:

Correlation units read relevant configured log sources. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Compliance evaluates Check Point security best practices, yet that applies to enable rule and gateway best-practice assessment rather than the observed issue.

B:

The event definition controls the correlation trigger, but the current evidence calls for a different R82 operation.

C:

Event Format determines which event details are displayed; this does not resolve the observed condition.

Question 271

A Check Point gateway still runs R80.30 and the change ticket requests R82 directly. The team has not confirmed whether this source version can follow a single upgrade step, and the package is not yet installed. An alternate diagnosis concerns the requirement to plan an upgrade of a management-server database, for which a colleague suggests choose a documented management Upgrade or Migration method. Based on the recorded symptoms, which corrective step should have priority?

  1. Use CPUSE for a compatible management-server in-place upgrade
  2. Consult the R82 supported upgrade methods by component type
  3. Run the Central Deployment Tool from the Management Server
  4. Choose a documented management Upgrade or Migration method

Explanation

Correct Answer

B:

Upgrade method support differs for gateways and management servers. This directly addresses the documented incident evidence.

Incorrect Answers

A:

CPUSE supports management in-place upgrade workflows, yet that applies to perform a management in-place upgrade with supported tooling rather than the observed issue.

C:

CDT uses the Management Server to deploy to gateways; this does not resolve the observed condition.

D:

Management databases use their supported upgrade and migration workflows, but the current evidence calls for a different R82 operation.

Question 272

The replacement R82 Management Server has successfully imported the database and passed integrity checks, but it remains on an isolated staging VLAN. Production gateways must now reach its intended management address. A preliminary suggestion is to plan control-plane addressing and reconnect managed gateways correctly. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Plan control-plane addressing and reconnect managed gateways correctly
  2. Back up the current management configuration first
  3. Connect the new management host on the intended network
  4. Export on the source and import on the destination

Explanation

Correct Answer

C:

The new server needs appropriate network connectivity to manage gateways. This directly addresses the documented incident evidence.

Incorrect Answers

A:

A migration needs correct management connectivity and trusted identity, but the current evidence calls for a different R82 operation.

B:

The R82 migration procedure begins with source backups; this does not resolve the observed condition.

D:

Management migration preserves the database through export/import, yet that applies to move an R82 Management Server database to another R82 host rather than the observed issue.

Question 273

After admitting a new ElasticXL member, the operator notices package cloning has stalled. Other members are forwarding normally. A proposed change would be to use insights or show cluster info provision live, which addresses the different requirement to monitor admission and automatic cloning progress. Which action instead addresses the observed incident?

  1. Inspect the $FWDIR/log/blade_config state messages
  2. Inspect /var/log/lightshot.log on the relevant member
  3. Allow the automatic image/configuration clone from SMO
  4. Use insights or show cluster info provision live

Explanation

Correct Answer

B:

The lightshot log documents SMO snapshot and image cloning. This directly addresses the documented incident evidence.

Incorrect Answers

A:

blade_config records important cluster up/down messages; this does not resolve the observed condition.

C:

ElasticXL copies the SMO image and settings to added members, yet that applies to distribute the first member software to newly joined nodes rather than the observed issue.

D:

ElasticXL provides member onboarding and clone status commands, but the current evidence calls for a different R82 operation.

Question 274

An extended R82 management-link partition leaves both peers reporting Active with different policy revisions. Restoring connectivity immediately would overwrite one database during role correction. A preliminary suggestion is to verify exactly one Active and remaining Standby status. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Verify exactly one Active and remaining Standby status
  2. Use the Active Management Server for write operations
  3. Initiate changeover so a healthy standby becomes Active
  4. Select which node remains Active before resetting its peer

Explanation

Correct Answer

D:

Collision recovery should establish an authoritative Active node. This directly addresses the documented incident evidence.

Incorrect Answers

A:

One Active peer is the expected result of controlled changeover, but the current evidence calls for a different R82 operation.

B:

Only the Active server accepts normal management changes; this does not resolve the observed condition.

C:

A controlled management changeover restores an Active management server, yet that applies to recover administration when the active management node goes offline rather than the observed issue.

Question 275

A Management Server keeps RFC1918 addressing behind a gateway NAT device. Remote managed gateways can reach the translated public address but not the private one, so policy installation and log control fail. The controls that address the separate requirement to apply newly edited manual NAT definitions to target gateways are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Configure supported NAT for management control connections
  2. Publish the session and install the relevant security policy
  3. Create translated objects, NAT rule, and matching Access Control rule
  4. Open Security Policies > Access Control > NAT

Explanation

Correct Answer

A:

Management behind NAT is supported with proper address mapping. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Published and installed policy activates gateway enforcement changes, but the current evidence calls for a different R82 operation.

C:

Manual NAT workflows also require valid translated objects and access; this does not resolve the observed condition.

D:

The Access Control NAT policy contains manual translation rules, yet that applies to locate Manual NAT configuration in SmartConsole rather than the observed issue.

Question 276

Four branch gateways require direct encrypted communication with every other branch. No central gateway should be mandatory, and the sites are all managed in the same R82 environment. The controls that address the separate requirement to authenticate a third-party VPN peer with certificates are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Use a Star VPN community with the hub as center
  2. Configure both gateways in the appropriate Site-to-Site VPN community
  3. Use a Mesh VPN community for peer relationships
  4. Configure accepted peer certificates and trusted issuing authority

Explanation

Correct Answer

C:

A Mesh model supports direct relationships among participating members. This directly addresses the documented incident evidence.

Incorrect Answers

A:

A Star community models branch-to-center connectivity, yet that applies to connect multiple branches through a central hub site rather than the observed issue.

B:

Site-to-Site communities define gateway membership and tunnel policy; this does not resolve the observed condition.

D:

Certificate authentication relies on valid identities and trust, but the current evidence calls for a different R82 operation.

Question 277

SmartEvent receives 40 matching denied-login logs in a minute. The current custom event fires on one log, overwhelming analysts. They want one correlated event only when at least 25 matching logs occur in 60 seconds. An alternate diagnosis concerns the requirement to focus on logins outside permitted working hours, for which a colleague suggests configure a Time Object for the event definition. Based on the recorded symptoms, which corrective step should have priority?

  1. Deploy and configure SmartEvent event correlation
  2. Configure a SmartEvent threshold of log count and seconds
  3. Configure the relevant SmartEvent alert reaction
  4. Configure a Time Object for the event definition

Explanation

Correct Answer

B:

SmartEvent threshold combines frequency and interval. This directly addresses the documented incident evidence.

Incorrect Answers

A:

SmartEvent correlates log patterns into events, yet that applies to correlate suspicious activity across many gateway logs rather than the observed issue.

C:

Event alerts are implemented in SmartEvent reactions; this does not resolve the observed condition.

D:

SmartEvent can use time objects for working-hours events, but the current evidence calls for a different R82 operation.

Question 278

A planned migration moves the Security Management Server database to a different R82 management host. The engineer proposes pushing a gateway hotfix because the Access Control rulebase must survive. An alternate diagnosis concerns the requirement to assess available upgrade pathways before execution, for which a colleague suggests consult the R82 supported upgrade methods by component type. Based on the recorded symptoms, which corrective step should have priority?

  1. Use Advanced Upgrade or migration rather than gateway CDT
  2. Consult the R82 supported upgrade methods by component type
  3. Capture a supported backup/snapshot and upgrade plan
  4. Use CPUSE for a compatible management-server in-place upgrade

Explanation

Correct Answer

A:

Management upgrading can require exporting and importing database content. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Upgrade method support differs for gateways and management servers, but the current evidence calls for a different R82 operation.

C:

Recovery artifacts make a failed upgrade safer to reverse; this does not resolve the observed condition.

D:

CPUSE supports management in-place upgrade workflows, yet that applies to perform a management in-place upgrade with supported tooling rather than the observed issue.

Question 279

A Security Management Server must be replaced with a new machine while retaining its policies, objects and database. The target will receive a clean supported R82 installation, rather than updating the source host in place. A preliminary suggestion is to run and review the documented Pre-Upgrade Verifier where applicable. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Connect the new management host on the intended network
  2. Perform a supported clean installation of R82 on the target
  3. Use Upgrade with Migration for new-server clean-install cutover
  4. Run and review the documented Pre-Upgrade Verifier where applicable

Explanation

Correct Answer

C:

Migration exports management state and imports to a separate target. This directly addresses the documented incident evidence.

Incorrect Answers

A:

The new server needs appropriate network connectivity to manage gateways; this does not resolve the observed condition.

B:

A clean R82 target is a documented migration destination, yet that applies to prepare the target machine for a management migration rather than the observed issue.

D:

Pre-upgrade checks identify incompatible conditions before cutover, but the current evidence calls for a different R82 operation.

Question 280

A capacity worksheet recommends increasing R82 ElasticXL membership far beyond the current appliance count, based solely on CPU demand. The proposed new hardware platform has not been validated in the supported topology tables. A preliminary suggestion is to inspect the $FWDIR/log/blade_config state messages. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Add supported members through ElasticXL admission and cloning
  2. Keep SecureXL in Kernel Mode (KPPAK) and retain default CoreXL Dynamic Balancing
  3. Inspect the $FWDIR/log/blade_config state messages
  4. Review supported platform and cluster membership limits

Explanation

Correct Answer

D:

ElasticXL has documented platform and membership constraints. This directly addresses the documented incident evidence.

Incorrect Answers

A:

ElasticXL is designed to scale membership under one gateway object, yet that applies to scale out the cluster without changing the gateway identity rather than the observed issue.

B:

ElasticXL requires KPPAK and Check Point recommends retaining the default CoreXL Dynamic Balancing configuration; this does not resolve the observed condition.

C:

blade_config records important cluster up/down messages, but the current evidence calls for a different R82 operation.

Check Point Certified Security Expert - R82 (CCSE) (156-315.82) Practice Tests