McAfee-Secured Website

Exam Code: 156-315.82

Exam Name: Check Point Certified Security Expert - R82 (CCSE)

Certification Provider: Checkpoint

Corresponding Certification: CCSE R82

Questions & Answers

100% Checkpoint 156-315.82 Guaranteed Success With Testking Training Materials

Get Real 156-315.82 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

Questions & Answers

100 Questions & Answers with Testing Engine

"Check Point Certified Security Expert - R82 (CCSE) Exam", also known as 156-315.82 exam, is a Checkpoint certification exam.

Pass your tests with the always up-to-date 156-315.82 Exam Engine. Your 156-315.82 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Checkpoint 156-315.82 Practice Test 27

Question 260

A standby R82 Management Server is synchronized and reachable, but SmartConsole opened against that standby lets an auditor view objects without modifying them. An administrator must publish a new outbound access rule without causing an HA role change. An alternate diagnosis concerns the requirement to unlock an administrator locked only on a standby node, for which a colleague suggests run the unlock-administrator API action on that Standby Server. Based on the recorded symptoms, which corrective step should have priority?

  1. Initiate changeover so a healthy standby becomes Active
  2. Run the unlock-administrator API action on that Standby Server
  3. Use Management HA actions to set one server to Standby
  4. Use the Active Management Server for write operations

Explanation

Correct Answer

D:

Only the Active server accepts normal management changes. This directly addresses the documented incident evidence.

Incorrect Answers

A:

A controlled management changeover restores an Active management server, yet that applies to recover administration when the active management node goes offline rather than the observed issue.

B:

A standby-only lock can require local API action on that node, but the current evidence calls for a different R82 operation.

C:

One Active server is required for a consistent normal HA state; this does not resolve the observed condition.

Question 261

The NAT logs show that a connection matched automatic source translation for an inside network and automatic destination translation for a published service. An operator assumes one manual first-match rule excludes the other automatically created rule. A preliminary suggestion is to create a Manual NAT rule matching the specified address pair. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Open Security Policies > Access Control > NAT
  2. Account for separate matching automatic source and destination rules
  3. Create a Manual NAT rule matching the specified address pair
  4. Place the intended matching rule first in the NAT rule order

Explanation

Correct Answer

B:

Automatic NAT can enforce matching source and destination rules. This directly addresses the documented incident evidence.

Incorrect Answers

A:

The Access Control NAT policy contains manual translation rules; this does not resolve the observed condition.

C:

Manual NAT can match both original source and destination, but the current evidence calls for a different R82 operation.

D:

Only the first matching Manual NAT rule is enforced, yet that applies to understand behavior when several Manual NAT rules could match rather than the observed issue.

Question 262

A fixed-address R82 gateway has two external ISP links to a cloud IPsec peer. It is not ElasticXL, DAIP, Spark or LSV. The cloud vendor requires independent standard tunnels and failover without Check Point proprietary RDP. A proposed change would be to configure Link Selection probing and redundant paths, which addresses the different requirement to keep two VPN ISP circuits available after one link fails. Which action instead addresses the observed incident?

  1. Configure the gateway Link Selection settings
  2. Configure Link Selection probing and redundant paths
  3. Configure supported Enhanced Link Selection interfaces and redundancy for the cloud peer
  4. Configure VPN Load Sharing through Link Selection when supported

Explanation

Correct Answer

C:

Enhanced Link Selection supports cloud IPsec redundancy without proprietary RDP, with DAIP and platform limits. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Link Selection controls VPN interface and address selection, yet that applies to choose the outgoing gateway address for VPN traffic rather than the observed issue.

B:

Availability probes help choose working links, but the current evidence calls for a different R82 operation.

D:

VPN Link Selection can share VPN traffic across available links; this does not resolve the observed condition.

Question 263

The compliance officer has completed the R82 framework assessment and must send management a printable PDF of noncompliant controls and the compliance scoring summary. Raw traffic logs are not the requested evidence artifact. A proposed change would be to review Regulatory Compliance requirements and scores, which addresses the different requirement to inspect a policy against a regulatory framework. Which action instead addresses the observed incident?

  1. Generate a Compliance Blade report in the Reports view
  2. Activate the Compliance Software Blade
  3. Review Regulatory Compliance requirements and scores
  4. Open Logs & Events and select Reports

Explanation

Correct Answer

A:

Compliance reporting supports a PDF output. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Compliance evaluates Check Point security best practices, yet that applies to enable rule and gateway best-practice assessment rather than the observed issue.

C:

Compliance maps checks to selected regulatory requirements, but the current evidence calls for a different R82 operation.

D:

Reports summarize monitored activity for presentation; this does not resolve the observed condition.

Question 264

A central upgrade job was configured against ten gateways, but the approved ticket lists only six of them. Operators want to avoid changes to unapproved sites without altering the package contents. The controls that address the separate requirement to schedule centrally coordinated gateway software changes are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Use supported Central Deployment parallel target selection
  2. Select Gateway & Server objects under Central Deployment
  3. Use the Gateway & Servers deployment actions in SmartConsole
  4. Deploy packages to the explicitly selected target objects

Explanation

Correct Answer

D:

Central Deployment scopes actions to selected targets. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Central Deployment can process several supported targets; this does not resolve the observed condition.

B:

The deployment selection identifies actual upgrade targets, yet that applies to choose target appliances for a SmartConsole hotfix push rather than the observed issue.

C:

SmartConsole exposes centrally managed software deployment actions, but the current evidence calls for a different R82 operation.

Question 265

After the replacement R82 management database imports and services start, SmartConsole connects successfully but the owner has not checked that critical access rules or gateway objects survived. The operator must distinguish this from a separate requirement to start a management database migration with rollback protection. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Close SmartConsole GUI clients on the source server
  2. Back up the current management configuration first
  3. Choose management database migration rather than gateway policy reinstall
  4. Connect with SmartConsole and inspect imported configuration

Explanation

Correct Answer

D:

Post-import SmartConsole inspection confirms objects and policies. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Closing clients avoids concurrent management modifications; this does not resolve the observed condition.

B:

The R82 migration procedure begins with source backups, but the current evidence calls for a different R82 operation.

C:

Management migration moves objects, settings, and policy database, yet that applies to preserve a database while changing the underlying host rather than the observed issue.

Question 266

A customer plans to enable traditional VSX mode on an already installed R82 ElasticXL cluster. The installation guide states that ElasticXL supports VSNext, and the VSNext choice must be made during installation. A preliminary suggestion is to use insights or show cluster info provision live. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Keep SecureXL in Kernel Mode (KPPAK) and retain default CoreXL Dynamic Balancing
  2. Select VSNext rather than unsupported Traditional VSX mode
  3. Review supported platform and cluster membership limits
  4. Use insights or show cluster info provision live

Explanation

Correct Answer

B:

ElasticXL supports VSNext mode. This directly addresses the documented incident evidence.

Incorrect Answers

A:

ElasticXL requires KPPAK and Check Point recommends retaining the default CoreXL Dynamic Balancing configuration, yet that applies to maintain R82-supported acceleration and default scheduling in an ElasticXL Cluster rather than the observed issue.

C:

ElasticXL has documented platform and membership constraints; this does not resolve the observed condition.

D:

ElasticXL provides member onboarding and clone status commands, but the current evidence calls for a different R82 operation.

Question 267

During a DR test, the team asks which configuration content is automatically copied between synchronized R82 Management Servers after sessions are published. It considers replacing synchronization with Gaia snapshots of the operating system. An alternate diagnosis concerns the requirement to distinguish management HA from dataplane security gateway HA, for which a colleague suggests plan management-server redundancy separately from gateway clustering. Based on the recorded symptoms, which corrective step should have priority?

  1. Promote the synchronized standby management database
  2. Open the Management High Availability status in SmartConsole
  3. Retain synchronized objects, rules, and management settings
  4. Plan management-server redundancy separately from gateway clustering

Explanation

Correct Answer

C:

Management HA keeps management configuration aligned on peers. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Synchronized standby retains management configuration for changeover, yet that applies to protect policies and rule definitions after active-server failure rather than the observed issue.

B:

Management HA status reports peer role and synchronization health; this does not resolve the observed condition.

D:

Management HA protects the management database and administration, but the current evidence calls for a different R82 operation.

Question 268

A vendor reports an address-range update, but operators need evidence that a particular Updatable Object refreshed on an R82 gateway. They have read access to SmartConsole Logs & Events and the object name. A preliminary suggestion is to verify Management Server and Gateway reachability to Check Point cloud. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Search Logs & Events for the named object and status Succeeded
  2. Verify Management Server and Gateway reachability to Check Point cloud
  3. Use an Updatable Object based on the service address feed
  4. Let the Updatable Object update on the Security Gateway

Explanation

Correct Answer

A:

Successful update logs provide feed-specific operational evidence. This directly addresses the documented incident evidence.

Incorrect Answers

B:

The relevant management and gateway components need cloud access, but the current evidence calls for a different R82 operation.

C:

Updatable Objects follow changing externally published addresses, yet that applies to match a cloud service whose published addresses change often rather than the observed issue.

D:

An Updatable Object membership refresh does not require policy reinstall; this does not resolve the observed condition.

Question 269

An R82 site-to-site peer negotiates an IPv6-only protected network over an IPv6 outer tunnel. A design review proposes IPv4 payload inside the IPv6 tunnel to reuse old selectors. An alternate diagnosis concerns the requirement to analyze failures caused by inconsistent encryption algorithms, for which a colleague suggests compare phase settings, algorithms, and proposals on both peers. Based on the recorded symptoms, which corrective step should have priority?

  1. Use the matching IPv6-in-IPv6 tunnel scheme and IKEv2
  2. Compare phase settings, algorithms, and proposals on both peers
  3. Verify phase-two traffic selectors and matching policy rules
  4. Configure both gateways in the appropriate Site-to-Site VPN community

Explanation

Correct Answer

A:

R82 IPv6 VPN tunneling uses IPv6 within IPv6 and IKEv2. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Both IKE/IPsec peers must agree on compatible proposals, but the current evidence calls for a different R82 operation.

C:

Data associations still need matching selectors and permitted traffic, yet that applies to troubleshoot a stable VPN phase-one but no protected data rather than the observed issue.

D:

Site-to-Site communities define gateway membership and tunnel policy; this does not resolve the observed condition.

Question 270

A new SmartEvent Correlation Unit starts without detecting multi-gateway incidents, although each Security Gateway forwards logs successfully to its intended Log Server. The correlation unit has not been pointed at those log sources. The controls that address the separate requirement to tune an event after repeated detections in short intervals are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Activate the Compliance Software Blade
  2. Edit the relevant Event Definition threshold
  3. Configure Event Format field display mapping
  4. Point the Correlation Unit at the intended production Log Servers

Explanation

Correct Answer

D:

Correlation units read relevant configured log sources. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Compliance evaluates Check Point security best practices, yet that applies to enable rule and gateway best-practice assessment rather than the observed issue.

B:

The event definition controls the correlation trigger, but the current evidence calls for a different R82 operation.

C:

Event Format determines which event details are displayed; this does not resolve the observed condition.

Check Point Certified Security Expert - R82 (CCSE) (156-315.82) Practice Tests