McAfee-Secured Website

Exam Code: 156-315.82

Exam Name: Check Point Certified Security Expert - R82 (CCSE)

Certification Provider: Checkpoint

Corresponding Certification: CCSE R82

Questions & Answers

100% Checkpoint 156-315.82 Guaranteed Success With Testking Training Materials

Get Real 156-315.82 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

Questions & Answers

100 Questions & Answers with Testing Engine

"Check Point Certified Security Expert - R82 (CCSE) Exam", also known as 156-315.82 exam, is a Checkpoint certification exam.

Pass your tests with the always up-to-date 156-315.82 Exam Engine. Your 156-315.82 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Checkpoint 156-315.82 Practice Test 30

Question 290

A mesh VPN community contains twelve managed gateways. Only one critical pair must maintain continuous tunnel health; other peer tunnels should remain demand-driven to limit overhead. A preliminary suggestion is to use periodic tunnel-test responses to determine up status. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Use periodic tunnel-test responses to determine up status
  2. Enable permanent-tunnel tracking or alert behavior
  3. Use interoperable IKE Dead Peer Detection for supported permanent-tunnel monitoring
  4. Select the particular tunnel in community Tunnel Management

Explanation

Correct Answer

D:

Tunnel Management permits specific individual permanent tunnels. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Test packet responses are the basis for permanent tunnel status, but the current evidence calls for a different R82 operation.

B:

Permanent tunnel monitoring can issue logs and alerts on failure, yet that applies to track failure of a monitored permanent VPN tunnel rather than the observed issue.

C:

R82 Dead Peer Detection supports third-party gateways, while proprietary tunnel-test packets require Check Point peers; this does not resolve the observed condition.

Question 291

A manager asks to open Check Point’s existing graphical dashboards for recent intrusion and traffic trends, not an exportable PDF and not a custom new detection. The operator has access to SmartConsole Logs & Events. A proposed change would be to access SmartView on the appropriate server web endpoint, which addresses the different requirement to use a browser instead of installed SmartConsole for views. Which action instead addresses the observed incident?

  1. Open Logs & Events and select Views
  2. Open Logs & Events and select Reports
  3. Access SmartView on the appropriate server web endpoint
  4. Build a customizable view in SmartView or Logs & Events

Explanation

Correct Answer

A:

Views present monitored security information and visual queries. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Reports summarize monitored activity for presentation, yet that applies to produce a saved security activity summary for management rather than the observed issue.

C:

SmartView exposes views and reports through its web application, but the current evidence calls for a different R82 operation.

D:

SmartView supports graphical views and log queries; this does not resolve the observed condition.

Question 292

An audit change advisory names a specific CPUSE Jumbo Hotfix rather than the newest available package. The gateway is eligible, but selecting the GUI’s Recommended Major Version would exceed the authorized change. The controls that address the separate requirement to apply hotfixes without changing a major release are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Use the Install Hotfix/Jumbo deployment action
  2. Search for the named Hotfix/Jumbo package in deployment UI
  3. Choose Install a Specific Hotfix/Jumbo and enter the filename
  4. Check Management Server connectivity to selected gateways

Explanation

Correct Answer

B:

The specific-package lookup matches the approved advisory. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Hotfix deployment targets fixes on the existing release, but the current evidence calls for a different R82 operation.

C:

Specific package selection targets the intended hotfix, yet that applies to install a specific rather than latest hotfix package rather than the observed issue.

D:

Remote deployment depends on control connectivity to targets; this does not resolve the observed condition.

Question 293

A compressed R82 migrate_server archive passes source checksums but, after FTP transfer, the target checksum differs and the file length has changed. The transfer client reports ASCII conversion was enabled. The operator must distinguish this from a separate requirement to check that a management export survived file transfer. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Transfer the database export archive in binary mode
  2. Export on the source and import on the destination
  3. Compare checksums of source and copied export files
  4. Invoke migrate_server export from the prescribed scripts directory

Explanation

Correct Answer

A:

Binary-mode transfer preserves compressed archive bytes. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Management migration preserves the database through export/import, yet that applies to move an R82 Management Server database to another R82 host rather than the observed issue.

C:

Matching hashes detect transfer corruption before import, but the current evidence calls for a different R82 operation.

D:

The management migration tool serializes the management database; this does not resolve the observed condition.

Question 294

A newly admitted R82 ElasticXL appliance boots with an empty local configuration and the initial site SMO has the approved image and cluster configuration. An engineer wants to configure each new member independently by hand. The operator must distinguish this from a separate requirement to verify the distribution architecture within one site. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Inspect /var/log/lightshot.log on the relevant member
  2. Allow the automatic image/configuration clone from SMO
  3. Expect the SMO to accept and distribute traffic to members
  4. Use insights or show cluster info provision live

Explanation

Correct Answer

B:

ElasticXL copies the SMO image and settings to added members. This directly addresses the documented incident evidence.

Incorrect Answers

A:

The lightshot log documents SMO snapshot and image cloning, yet that applies to investigate image-cloning progress problems rather than the observed issue.

C:

The SMO handles distribution to other site members, but the current evidence calls for a different R82 operation.

D:

ElasticXL provides member onboarding and clone status commands; this does not resolve the observed condition.

Question 295

An internal audit needs to inspect the currently synchronized R82 Access Control rulebase directly on the standby management peer. The auditors must not modify or publish policy, and the active server will remain in service. An alternate diagnosis concerns the requirement to assign the default role to newly installed secondary management, for which a colleague suggests leave the newly defined secondary Management Server in Standby. Based on the recorded symptoms, which corrective step should have priority?

  1. Promote the synchronized standby management database
  2. Leave the newly defined secondary Management Server in Standby
  3. Run the unlock-administrator API action on that Standby Server
  4. Open the Standby Management Server in read-only SmartConsole mode

Explanation

Correct Answer

D:

Standby permits inspection without competing configuration changes. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Synchronized standby retains management configuration for changeover, yet that applies to protect policies and rule definitions after active-server failure rather than the observed issue.

B:

Secondary management servers start in Standby by default, but the current evidence calls for a different R82 operation.

C:

A standby-only lock can require local API action on that node; this does not resolve the observed condition.

Question 296

A published web service is reachable at the correct translated public address, but inbound requests to TCP 8443 must arrive at an internal listener on TCP 443. The existing Manual NAT rule correctly matches the original source and destination addresses. An alternate diagnosis concerns the requirement to translate the source and destination IP in one connection, for which a colleague suggests create a Manual NAT rule with both translated fields. Based on the recorded symptoms, which corrective step should have priority?

  1. Create an appropriate one-direction Manual NAT policy rule
  2. Place the intended matching rule first in the NAT rule order
  3. Use the Translated Services column in a Manual NAT rule
  4. Create a Manual NAT rule with both translated fields

Explanation

Correct Answer

C:

Manual NAT can translate services as well as addresses. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Manual NAT supports direction-specific static translation; this does not resolve the observed condition.

B:

Only the first matching Manual NAT rule is enforced, yet that applies to understand behavior when several Manual NAT rules could match rather than the observed issue.

D:

Manual NAT allows simultaneous source and destination translation, but the current evidence calls for a different R82 operation.

Question 297

A fixed-address R82 gateway has two external ISP links to a cloud IPsec peer. It is not ElasticXL, DAIP, Spark or LSV. The cloud vendor requires independent standard tunnels and failover without Check Point proprietary RDP. A preliminary suggestion is to configure the gateway Link Selection settings. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Configure supported Enhanced Link Selection interfaces and redundancy for the cloud peer
  2. Configure VPN Load Sharing through Link Selection when supported
  3. Configure the gateway Link Selection settings
  4. Confirm chosen local interface and peer-advertised address

Explanation

Correct Answer

A:

Enhanced Link Selection supports cloud IPsec redundancy without proprietary RDP, with DAIP and platform limits. This directly addresses the documented incident evidence.

Incorrect Answers

B:

VPN Link Selection can share VPN traffic across available links, yet that applies to define how VPN traffic is distributed across multiple usable links rather than the observed issue.

C:

Link Selection controls VPN interface and address selection, but the current evidence calls for a different R82 operation.

D:

Link Selection determines the address advertised and route used; this does not resolve the observed condition.

Question 298

A malicious-download SmartEvent definition is already detecting incidents and writing event records. The SOC manager now requires an automatic operator notification on each critical match, without modifying detection thresholds. A preliminary suggestion is to deploy and configure SmartEvent event correlation. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Deploy and configure SmartEvent event correlation
  2. Configure the relevant SmartEvent alert reaction
  3. Adjust its event threshold after examining the event
  4. Configure a SmartEvent threshold of log count and seconds

Explanation

Correct Answer

B:

Event alerts are implemented in SmartEvent reactions. This directly addresses the documented incident evidence.

Incorrect Answers

A:

SmartEvent correlates log patterns into events, but the current evidence calls for a different R82 operation.

C:

Tuning event thresholds reduces false-positive correlation, yet that applies to reduce false alerts for a noisy SmartEvent definition rather than the observed issue.

D:

SmartEvent threshold combines frequency and interval; this does not resolve the observed condition.

Question 299

A remote gateway is managed normally but temporarily has no management-side Central Deployment path. An engineer is logged in locally to Gaia and has a compatible CPUSE offline package. The operator must distinguish this from a separate requirement to validate installed hotfix levels after deployment. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Review the package installation and gateway version result
  2. Back up the appliance and confirm the target package is supported
  3. Choose Install a Specific Hotfix/Jumbo and enter the filename
  4. Use CPUSE with the applicable local/cloud package source

Explanation

Correct Answer

D:

CPUSE performs Gaia software package installation and upgrades. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Actual installed version proves the deployment target state, but the current evidence calls for a different R82 operation.

B:

Backup and compatibility checks reduce recoverability risk; this does not resolve the observed condition.

C:

Specific package selection targets the intended hotfix, yet that applies to install a specific rather than latest hotfix package rather than the observed issue.

Question 300

A security team is doing an R82 Advanced Upgrade where existing management data must survive through a target host replacement. The administrator proposes deleting the old database after gateway policies install. The operator must distinguish this from a separate requirement to move export archives between management servers safely. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Invoke migrate_server export from the prescribed scripts directory
  2. Transfer the database export archive in binary mode
  3. Export the management database before upgrading and re-import afterward
  4. Invoke migrate_server import for the exported archive

Explanation

Correct Answer

C:

Advanced Upgrade preserves state through export and import. This directly addresses the documented incident evidence.

Incorrect Answers

A:

The management migration tool serializes the management database, yet that applies to run management database export with the R82 migration tool rather than the observed issue.

B:

Binary-mode transfer preserves compressed archive bytes, but the current evidence calls for a different R82 operation.

D:

The migration import restores the exported management database; this does not resolve the observed condition.

Check Point Certified Security Expert - R82 (CCSE) (156-315.82) Practice Tests