McAfee-Secured Website

Exam Bundle

Exam Code: EX200

Exam Name Red Hat Certified System Administrator (RHCSA)

Certification Provider: RedHat

Corresponding Certification: RHCSA

RedHat EX200 Bundle $44.99

100% RedHat EX200 Guaranteed Success With Testking Training Materials

Get Real EX200 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    EX200 Questions & Answers

    111 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual EX200 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • EX200 Video Course

    EX200 Video Course

    71 Video Lectures

    EX200 Video Course is developed by RedHat Professionals to help you pass the EX200 exam.

    Description

    This course will improve your knowledge and skills required to pass Red Hat Certified System Administrator (RHCSA) exam.
  • Study Guide

    EX200 Study Guide

    1601 PDF Pages

    Developed by industry experts, this 1601-page guide spells out in painstaking detail all of the information you need to ace EX200 exam.

Red Hat Certified System Administrator (RHCSA) (EX200) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    111 Questions

    $124.99
  • EX200 Video Course

    Video Course

    71 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1601 PDF Pages

    $29.99

RedHat EX200 Practice Test 74

Question 730

The lab examiner asks for evidence after this assignment: An operator confuses a partition number with an LVM logical volume name when looking for a mounted database. What is the decisive verification step?

  1. `lvs /dev/vg_training/lv_db` reports the requested LV and does not show a filesystem automatically.
  2. The expected device appears under the lab inventory ID and no device is formatted during discovery.
  3. The volume group reports sufficient free extents before the successful resize.
  4. The resulting mapping identifies filesystem to LV to VG to PV without changing data.

Explanation

Correct Answer

D:

The resulting mapping identifies filesystem to LV to VG to PV without changing data. This check confirms the expected effect of: Use `lsblk -f` plus `lvs` and `findmnt` to resolve which block layer currently backs `/srv/db`. It distinguishes the intended result from the original failure mechanism: Device mapper LVM layers and GPT partition names represent different levels of storage.

Incorrect Answers

A:

`lvs /dev/vg_training/lv_db` reports the requested LV and does not show a filesystem automatically. That verifies a separate lab task: An LVM volume group `vg_training` exists and a test database requires a new 2 GiB logical volume. It does not validate the implementation required here: Use `lsblk -f` plus `lvs` and `findmnt` to resolve which block layer currently backs `/srv/db`.

B:

The expected device appears under the lab inventory ID and no device is formatted during discovery. That verifies a separate lab task: A newly attached block device is not visible to LVM because it is not yet recognized by the kernel. It does not validate the implementation required here: Use `lsblk -f` plus `lvs` and `findmnt` to resolve which block layer currently backs `/srv/db`.

C:

The volume group reports sufficient free extents before the successful resize. That verifies a separate lab task: An LV from a disposable VG has no free extents to grow, and the operator repeatedly retries `lvextend`. It does not validate the implementation required here: Use `lsblk -f` plus `lvs` and `findmnt` to resolve which block layer currently backs `/srv/db`.

Question 731

A training host has this situation: An operator confuses a partition number with an LVM logical volume name when looking for a mounted database. Which system behavior best explains the original failure or risk?

  1. Device mapper LVM layers and GPT partition names represent different levels of storage.
  2. Stale signatures can affect device recognition even when partitions seem empty.
  3. Kernel-assigned block device names may shift, whereas filesystem UUIDs identify the intended volume.
  4. LVM physical volumes carry metadata that lets volume groups manage underlying extents.

Explanation

Correct Answer

A:

Device mapper LVM layers and GPT partition names represent different levels of storage. This explains the task's initial state: An operator confuses a partition number with an LVM logical volume name when looking for a mounted database. The supported lab action is: Use `lsblk -f` plus `lvs` and `findmnt` to resolve which block layer currently backs `/srv/db`.

Incorrect Answers

B:

Stale signatures can affect device recognition even when partitions seem empty. This mechanism applies to another scenario: A lab disk appears to contain an old filesystem signature after a supposedly blank virtual disk is attached. The given lab state instead requires the more specific cause in the correct choice.

C:

Kernel-assigned block device names may shift, whereas filesystem UUIDs identify the intended volume. This mechanism applies to another scenario: A server has an approved lab LV mounted through `/dev/vdb1` and the device name changes after adding another disk. The given lab state instead requires the more specific cause in the correct choice.

D:

LVM physical volumes carry metadata that lets volume groups manage underlying extents. This mechanism applies to another scenario: A blank LVM lab partition `/dev/vdb1` exists but cannot be added to a volume group until initialized. The given lab state instead requires the more specific cause in the correct choice.

Question 732

A student has implemented the following configuration: An operator confuses a partition number with an LVM logical volume name when looking for a mounted database. What repeatable control best reduces regressions or unsafe changes?

  1. Check free space and partition start/end positions before and after a partition operation.
  2. Include a full storage dependency diagram in change requests.
  3. Audit swap entries and device UUIDs after storage migrations.
  4. Track approved PV additions in capacity records and test before growing filesystems.

Explanation

Correct Answer

B:

Include a full storage dependency diagram in change requests. This guards against recurrence of: Device mapper LVM layers and GPT partition names represent different levels of storage. Confirm the lab's final state by: The resulting mapping identifies filesystem to LV to VG to PV without changing data.

Incorrect Answers

A:

Check free space and partition start/end positions before and after a partition operation. That control is best suited to a separate scenario: A verified blank GPT training disk needs one new 1 GiB partition with appropriate alignment. It is not the best safeguard for the current mechanism: Device mapper LVM layers and GPT partition names represent different levels of storage.

C:

Audit swap entries and device UUIDs after storage migrations. That control is best suited to a separate scenario: A previously working swap LV disappears after restart because no persistent swap entry was configured. It is not the best safeguard for the current mechanism: Device mapper LVM layers and GPT partition names represent different levels of storage.

D:

Track approved PV additions in capacity records and test before growing filesystems. That control is best suited to a separate scenario: An existing volume group needs more capacity, and a new dedicated blank PV has been attached. It is not the best safeguard for the current mechanism: Device mapper LVM layers and GPT partition names represent different levels of storage.

Question 733

You are responsible for a local virtualization classroom. The required hands-on outcome is: A filesystem was mounted read-only because its fstab options accidentally included `ro`, preventing service writes. Select the most appropriate implementation step.

  1. Do not shrink the XFS filesystem; instead plan a supported backup, create a smaller replacement filesystem, restore and switch mounts.
  2. Set the group owner and setgid bit on the lab directory, e.g. `chgrp analysts /srv/team && chmod 2770 /srv/team`.
  3. Check the server export permissions, UID/GID mapping and client ownership, then correct authorized permissions on the exporting server.
  4. Inspect `findmnt -no OPTIONS /srv/archive`, correct the reviewed mount options and remount safely when supported.

Explanation

Correct Answer

D:

Inspect `findmnt -no OPTIONS /srv/archive`, correct the reviewed mount options and remount safely when supported. This directly addresses the lab target: A filesystem was mounted read-only because its fstab options accidentally included `ro`, preventing service writes. The underlying behavior is: Mount option flags can override normal file permission expectations. Verification: The mount options show `rw` and a controlled authorized file creation succeeds.

Incorrect Answers

A:

Do not shrink the XFS filesystem; instead plan a supported backup, create a smaller replacement filesystem, restore and switch mounts. This is an appropriate step for a DIFFERENT exercise, specifically: A junior admin proposes shrinking a mounted XFS filesystem to make room for another LV. It does not address the required lab state, whose mechanism is: Mount option flags can override normal file permission expectations.

B:

Set the group owner and setgid bit on the lab directory, e.g. `chgrp analysts /srv/team && chmod 2770 /srv/team`. This is an appropriate step for a DIFFERENT exercise, specifically: A directory used for temporary team uploads must grant group access to new files through inherited group ownership. It does not address the required lab state, whose mechanism is: Mount option flags can override normal file permission expectations.

C:

Check the server export permissions, UID/GID mapping and client ownership, then correct authorized permissions on the exporting server. This is an appropriate step for a DIFFERENT exercise, specifically: A team creates an NFS mount locally but cannot write files despite apparently open Unix mode bits. It does not address the required lab state, whose mechanism is: Mount option flags can override normal file permission expectations.

Question 734

After a lab configuration change, verify: A filesystem was mounted read-only because its fstab options accidentally included `ro`, preventing service writes. Which result most directly proves the desired system state?

  1. The mount options show `rw` and a controlled authorized file creation succeeds.
  2. `findmnt /mnt/team` reports an NFS mount and a permitted test file is readable.
  3. `df -h /mnt/ext4lab` reflects the newly available capacity.
  4. `blkid /dev/vg_training/lv_data` reports `TYPE="xfs"` and a new filesystem UUID.

Explanation

Correct Answer

A:

The mount options show `rw` and a controlled authorized file creation succeeds. This check confirms the expected effect of: Inspect `findmnt -no OPTIONS /srv/archive`, correct the reviewed mount options and remount safely when supported. It distinguishes the intended result from the original failure mechanism: Mount option flags can override normal file permission expectations.

Incorrect Answers

B:

`findmnt /mnt/team` reports an NFS mount and a permitted test file is readable. That verifies a separate lab task: A lab NFS server exports `/exports/team` and a client needs it under `/mnt/team` during the current session. It does not validate the implementation required here: Inspect `findmnt -no OPTIONS /srv/archive`, correct the reviewed mount options and remount safely when supported.

C:

`df -h /mnt/ext4lab` reflects the newly available capacity. That verifies a separate lab task: An ext4 training LV was expanded but file capacity remains unchanged. It does not validate the implementation required here: Inspect `findmnt -no OPTIONS /srv/archive`, correct the reviewed mount options and remount safely when supported.

D:

`blkid /dev/vg_training/lv_data` reports `TYPE="xfs"` and a new filesystem UUID. That verifies a separate lab task: A fresh disposable LV is unformatted and must hold an XFS file system for a lab data directory. It does not validate the implementation required here: Inspect `findmnt -no OPTIONS /srv/archive`, correct the reviewed mount options and remount safely when supported.

Question 735

In an EX200-style practice lab, this condition exists: A filesystem was mounted read-only because its fstab options accidentally included `ro`, preventing service writes. Which explanation correctly identifies the underlying issue?

  1. XFS and ext4 are different filesystem formats and cannot be interchanged after formatting without migration.
  2. Mount option flags can override normal file permission expectations.
  3. Increasing block-device capacity does not automatically grow the filesystem metadata.
  4. ext4 filesystem capacity has a separate resize operation from LVM block capacity.

Explanation

Correct Answer

B:

Mount option flags can override normal file permission expectations. This explains the task's initial state: A filesystem was mounted read-only because its fstab options accidentally included `ro`, preventing service writes. The supported lab action is: Inspect `findmnt -no OPTIONS /srv/archive`, correct the reviewed mount options and remount safely when supported.

Incorrect Answers

A:

XFS and ext4 are different filesystem formats and cannot be interchanged after formatting without migration. This mechanism applies to another scenario: A disposable training volume is required to use ext4 so filesystem behavior can be compared with XFS. The given lab state instead requires the more specific cause in the correct choice.

C:

Increasing block-device capacity does not automatically grow the filesystem metadata. This mechanism applies to another scenario: An XFS filesystem is nearly full even though its LV has been extended by 2 GiB. The given lab state instead requires the more specific cause in the correct choice.

D:

ext4 filesystem capacity has a separate resize operation from LVM block capacity. This mechanism applies to another scenario: An ext4 training LV was expanded but file capacity remains unchanged. The given lab state instead requires the more specific cause in the correct choice.

Question 736

After completing this practical task on a local virtualization classroom: A filesystem was mounted read-only because its fstab options accidentally included `ro`, preventing service writes. Which operational safeguard helps keep the result correct and safe?

  1. Validate map syntax and restart/enable autofs after controlled changes.
  2. Treat fstab modifications as high-impact and test mount behavior while a recovery console is available.
  3. Check effective mount flags before broadly changing ownership or file modes.
  4. Use a sticky bit and cleanup policy on any intentionally shared writeable scratch area.

Explanation

Correct Answer

C:

Check effective mount flags before broadly changing ownership or file modes. This guards against recurrence of: Mount option flags can override normal file permission expectations. Confirm the lab's final state by: The mount options show `rw` and a controlled authorized file creation succeeds.

Incorrect Answers

A:

Validate map syntax and restart/enable autofs after controlled changes. That control is best suited to a separate scenario: A large remote home-directory NFS tree should mount on demand rather than all at login. It is not the best safeguard for the current mechanism: Mount option flags can override normal file permission expectations.

B:

Treat fstab modifications as high-impact and test mount behavior while a recovery console is available. That control is best suited to a separate scenario: An fstab entry for a newly created filesystem contains a typo and the lab VM hangs on the next reboot. It is not the best safeguard for the current mechanism: Mount option flags can override normal file permission expectations.

D:

Use a sticky bit and cleanup policy on any intentionally shared writeable scratch area. That control is best suited to a separate scenario: A sticky-bit public scratch directory must allow shared file creation while preventing users from deleting each other's files. It is not the best safeguard for the current mechanism: Mount option flags can override normal file permission expectations.

Question 737

Lab exercise on a nonproduction Linux administration sandbox: A service is enabled and active, but the actual application fails after boot because a required mount is not available in time. Which proposed RHEL 10 command or configuration action most directly achieves the required lab state?

  1. Review systemd `RequiresMountsFor=` or appropriate mount dependencies in the service unit and confirm the filesystem's persistent mount.
  2. Install an approved crontab entry `30 2 * * * /usr/local/bin/lab-report` for the correct account.
  3. Use `dnf check-update` followed by a reviewed `dnf update packagename` transaction from trusted repositories.
  4. Inspect `grubby --info=ALL` and set the approved kernel default using the supported `grubby --set-default` method.

Explanation

Correct Answer

A:

Review systemd `RequiresMountsFor=` or appropriate mount dependencies in the service unit and confirm the filesystem's persistent mount. This directly addresses the lab target: A service is enabled and active, but the actual application fails after boot because a required mount is not available in time. The underlying behavior is: Systemd service ordering and filesystem availability are separate dependencies. Verification: After a controlled reboot, the mount is available when the service starts and the application reads its data.

Incorrect Answers

B:

Install an approved crontab entry `30 2 * * * /usr/local/bin/lab-report` for the correct account. This is an appropriate step for a DIFFERENT exercise, specifically: An analyst needs a recurring report at 02:30 every day, but a manually started shell script runs only once. It does not address the required lab state, whose mechanism is: Systemd service ordering and filesystem availability are separate dependencies.

C:

Use `dnf check-update` followed by a reviewed `dnf update packagename` transaction from trusted repositories. This is an appropriate step for a DIFFERENT exercise, specifically: An RPM package on a training node is stale; the administrator needs to apply approved security updates without reinstalling everything. It does not address the required lab state, whose mechanism is: Systemd service ordering and filesystem availability are separate dependencies.

D:

Inspect `grubby --info=ALL` and set the approved kernel default using the supported `grubby --set-default` method. This is an appropriate step for a DIFFERENT exercise, specifically: After an authorized kernel update, a lab VM boots the wrong kernel because the default boot entry points to an older release. It does not address the required lab state, whose mechanism is: Systemd service ordering and filesystem availability are separate dependencies.

Question 738

In a hands-on RHCSA practice VM, the assigned outcome was: A service is enabled and active, but the actual application fails after boot because a required mount is not available in time. What specific verification would demonstrate the target state?

  1. After a simulated missed schedule, the service runs on next startup and `systemctl list-timers` shows a new next trigger.
  2. After a controlled reboot, the mount is available when the service starts and the application reads its data.
  3. `atq` lists the pending job and the fixture log records one run at the expected time.
  4. `systemctl is-enabled lab-cleanup.timer` and `systemctl list-timers` show the active scheduled unit.

Explanation

Correct Answer

B:

After a controlled reboot, the mount is available when the service starts and the application reads its data. This check confirms the expected effect of: Review systemd `RequiresMountsFor=` or appropriate mount dependencies in the service unit and confirm the filesystem's persistent mount. It distinguishes the intended result from the original failure mechanism: Systemd service ordering and filesystem availability are separate dependencies.

Incorrect Answers

A:

After a simulated missed schedule, the service runs on next startup and `systemctl list-timers` shows a new next trigger. That verifies a separate lab task: A scheduled housekeeping task should run once after a machine missed its overnight run while powered off. It does not validate the implementation required here: Review systemd `RequiresMountsFor=` or appropriate mount dependencies in the service unit and confirm the filesystem's persistent mount.

C:

`atq` lists the pending job and the fixture log records one run at the expected time. That verifies a separate lab task: A disposable RHEL system must execute a one-time administrative script at 19:15 today rather than repeatedly. It does not validate the implementation required here: Review systemd `RequiresMountsFor=` or appropriate mount dependencies in the service unit and confirm the filesystem's persistent mount.

D:

`systemctl is-enabled lab-cleanup.timer` and `systemctl list-timers` show the active scheduled unit. That verifies a separate lab task: A timer has been created under `/etc/systemd/system`, but it shows inactive and the intended job never runs. It does not validate the implementation required here: Review systemd `RequiresMountsFor=` or appropriate mount dependencies in the service unit and confirm the filesystem's persistent mount.

Question 739

A trainee is diagnosing: A service is enabled and active, but the actual application fails after boot because a required mount is not available in time. Which root cause should they recognize before changing the system?

  1. A timer schedules activation of a corresponding service unit rather than executing arbitrary shell code by itself.
  2. The Persistent option handles missed calendar timer events differently from regular cron execution.
  3. Systemd service ordering and filesystem availability are separate dependencies.
  4. A saved daemon configuration change may not automatically change the running daemon state.

Explanation

Correct Answer

C:

Systemd service ordering and filesystem availability are separate dependencies. This explains the task's initial state: A service is enabled and active, but the actual application fails after boot because a required mount is not available in time. The supported lab action is: Review systemd `RequiresMountsFor=` or appropriate mount dependencies in the service unit and confirm the filesystem's persistent mount.

Incorrect Answers

A:

A timer schedules activation of a corresponding service unit rather than executing arbitrary shell code by itself. This mechanism applies to another scenario: A systemd timer unit is enabled but never starts the report job because its matching service name is wrong. The given lab state instead requires the more specific cause in the correct choice.

B:

The Persistent option handles missed calendar timer events differently from regular cron execution. This mechanism applies to another scenario: A scheduled housekeeping task should run once after a machine missed its overnight run while powered off. The given lab state instead requires the more specific cause in the correct choice.

D:

A saved daemon configuration change may not automatically change the running daemon state. This mechanism applies to another scenario: A change updates `/etc/chrony.conf` but the running chronyd service continues querying the retired time source. The given lab state instead requires the more specific cause in the correct choice.

Question 740

For this Linux administration lab: A service is enabled and active, but the actual application fails after boot because a required mount is not available in time. Which safety and lifecycle check best prevents the same problem returning?

  1. Choose service accounts and privileges deliberately for each recurring job.
  2. Implement bounded restart behavior and investigate recurring failure events promptly.
  3. Record both the configuration file change and observed runtime source.
  4. Test full cold-boot readiness, not just whether a unit says active.

Explanation

Correct Answer

D:

Test full cold-boot readiness, not just whether a unit says active. This guards against recurrence of: Systemd service ordering and filesystem availability are separate dependencies. Confirm the lab's final state by: After a controlled reboot, the mount is available when the service starts and the application reads its data.

Incorrect Answers

A:

Choose service accounts and privileges deliberately for each recurring job. That control is best suited to a separate scenario: A recurring cron script runs as root because it was inserted into the system crontab, while it should run as a least-privilege reporting account. It is not the best safeguard for the current mechanism: Systemd service ordering and filesystem availability are separate dependencies.

B:

Implement bounded restart behavior and investigate recurring failure events promptly. That control is best suited to a separate scenario: A service starts but restarts endlessly because `Restart=always` masks a broken configuration, filling logs. It is not the best safeguard for the current mechanism: Systemd service ordering and filesystem availability are separate dependencies.

C:

Record both the configuration file change and observed runtime source. That control is best suited to a separate scenario: A change updates `/etc/chrony.conf` but the running chronyd service continues querying the retired time source. It is not the best safeguard for the current mechanism: Systemd service ordering and filesystem availability are separate dependencies.