Question 190
After a lab configuration change, verify: The lab interface is assigned the right IP but the host cannot reach an off-subnet gateway due to an incorrect default route. Which result most directly proves the desired system state?
Explanation
Correct Answer
`ip route get 203.0.113.10` selects the correct gateway and the intended test connection succeeds. This check confirms the expected effect of: Review `ip route`, then set the approved NetworkManager `ipv4.gateway` and route fields on the active profile. It distinguishes the intended result from the original failure mechanism: A valid local interface address does not automatically provide off-subnet routing.
Incorrect Answers
The profile reflects changed settings and existing remote management remains recoverable. That verifies a separate lab task: A new network connection profile was edited but the operator attempts an unsafe remote restart of all networking services. It does not validate the implementation required here: Review `ip route`, then set the approved NetworkManager `ipv4.gateway` and route fields on the active profile.
An authorized client connects and the correct zone reports the service or port. That verifies a separate lab task: A firewall rule was added to the default zone, but the application's NIC is assigned to a different active zone. It does not validate the implementation required here: Review `ip route`, then set the approved NetworkManager `ipv4.gateway` and route fields on the active profile.
After reconnect or reboot `nmcli con show` and `ip addr` still report the address. That verifies a separate lab task: A technician adds an IPv4 address with `ip addr add`, but it disappears after reboot. It does not validate the implementation required here: Review `ip route`, then set the approved NetworkManager `ipv4.gateway` and route fields on the active profile.