McAfee-Secured Website

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

100% Nokia 4A0-D01 Guaranteed Success With Testking Training Materials

Get Real 4A0-D01 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

61 Questions & Answers with Testing Engine

"Nokia Data Center Fabric Fundamentals Exam", also known as 4A0-D01 exam, is a Nokia certification exam.

Pass your tests with the always up-to-date 4A0-D01 Exam Engine. Your 4A0-D01 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 79

Question 780

At Maplebridge Rail Logistics, while verifying observability, the data center fabric team observes: An operator pushes individual switch settings that later drift from centrally managed EDA intent. What ongoing operational safeguard directly addresses this root issue?

  1. Use defined change ownership for intent-managed devices
  2. Check network intent results separately from Kubernetes platform health
  3. Include controlled monitoring fixtures in intent-platform acceptance
  4. Require transaction and live-network acceptance for service intent changes

Explanation

Correct Answer

A:

At Maplebridge Rail Logistics, while verifying observability, the preventive control is: Use defined change ownership for intent-managed devices. It catches the same mechanism (Manual changes were made without accounting for intent ownership and reconciliation) before the symptom recurs. An appropriate regression observation is: The intended setting persists through an EDA consistency check without undocumented deviations.

Incorrect Answers

B:

At Maplebridge Rail Logistics, while verifying observability, this option proposes: Check network intent results separately from Kubernetes platform health. It tests a different symptom: An EDA planning team assumes Kubernetes deployment alone creates fabric connectivity. For the observed case, the relevant distinction is Manual changes were made without accounting for intent ownership and reconciliation, with verification: The intended setting persists through an EDA consistency check without undocumented deviations.

C:

At Maplebridge Rail Logistics, while verifying observability, this option proposes: Include controlled monitoring fixtures in intent-platform acceptance. The option describes a different failure mode: An EDA observability panel has no alerts during a test network failure. It would address The team uses the absence of alarms as the sole evidence of monitoring completeness, but here the case reports An operator pushes individual switch settings that later drift from centrally managed EDA intent. The current required evidence is: The intended setting persists through an EDA consistency check without undocumented deviations.

D:

At Maplebridge Rail Logistics, while verifying observability, this option proposes: Require transaction and live-network acceptance for service intent changes. That choice would be more relevant when this different symptom occurs: A tenant service deployment is considered complete because EDA accepted the requested intent. The present scenario instead points to: Manual changes were made without accounting for intent ownership and reconciliation. The correct resolution has its own verification outcome: The intended setting persists through an EDA consistency check without undocumented deviations.

Question 781

At Ashbrook Health Systems, while onboarding a device through EDA, the data center fabric team observes: An EDA observability panel has no alerts during a test network failure. Which supported remediation most directly addresses the stated failure?

  1. Validate configured telemetry collection and EDA observability against a controlled fault
  2. Apply the approved fabric intent workflow and verify resulting device configuration and state
  3. Reconcile the needed change through the authorized EDA fabric or service intent workflow
  4. Model and validate the actual fabric intent and device onboarding requirements in EDA

Explanation

Correct Answer

A:

At Ashbrook Health Systems, while onboarding a device through EDA, validate configured telemetry collection and EDA observability against a controlled fault. This addresses the specific failure mechanism (The team uses the absence of alarms as the sole evidence of monitoring completeness) rather than treating only the visible alarm. The required acceptance evidence is: The known fault produces the expected observed state and alarm without false green status.

Incorrect Answers

B:

At Ashbrook Health Systems, while onboarding a device through EDA, this option proposes: Apply the approved fabric intent workflow and verify resulting device configuration and state. That choice would be more relevant when this different symptom occurs: A newly onboarded device is visible in EDA but lacks its intended fabric configuration. The present scenario instead points to: The team uses the absence of alarms as the sole evidence of monitoring completeness. The correct resolution has its own verification outcome: The known fault produces the expected observed state and alarm without false green status.

C:

At Ashbrook Health Systems, while onboarding a device through EDA, this option proposes: Reconcile the needed change through the authorized EDA fabric or service intent workflow. This is a valid category of fabric maintenance for another scenario (An operator pushes individual switch settings that later drift from centrally managed EDA intent), not the targeted action for Ashbrook Health Systems. The distinction is the actual cause: The team uses the absence of alarms as the sole evidence of monitoring completeness.

D:

At Ashbrook Health Systems, while onboarding a device through EDA, this option proposes: Model and validate the actual fabric intent and device onboarding requirements in EDA. Although related to Event-Driven Automation and intent operations, the proposed change fits another mechanism: The orchestrator platform is confused with the intended fabric and service intent definitions. The evidence in the current case requires a different result: The known fault produces the expected observed state and alarm without false green status.

Question 782

At Ashbrook Health Systems, while onboarding a device through EDA, the data center fabric team observes: An EDA observability panel has no alerts during a test network failure. Which evidence directly validates the intended repair?

  1. The device shows expected routed fabric links and EDA intended state after reconciliation
  2. The intended service is realized on devices and a controlled workload flow succeeds
  3. The provisioned environment contains the approved fabric topology and verified network links
  4. The known fault produces the expected observed state and alarm without false green status

Explanation

Correct Answer

D:

At Ashbrook Health Systems, while onboarding a device through EDA, the known fault produces the expected observed state and alarm without false green status. This is linked directly to the observed symptom (An EDA observability panel has no alerts during a test network failure) and cannot be replaced by an unrelated healthy dashboard.

Incorrect Answers

A:

At Ashbrook Health Systems, while onboarding a device through EDA, this option proposes: The device shows expected routed fabric links and EDA intended state after reconciliation. That choice would be more relevant when this different symptom occurs: A newly onboarded device is visible in EDA but lacks its intended fabric configuration. The present scenario instead points to: The team uses the absence of alarms as the sole evidence of monitoring completeness. The correct resolution has its own verification outcome: The known fault produces the expected observed state and alarm without false green status.

B:

At Ashbrook Health Systems, while onboarding a device through EDA, this option proposes: The intended service is realized on devices and a controlled workload flow succeeds. This is a valid category of fabric maintenance for another scenario (A tenant service deployment is considered complete because EDA accepted the requested intent), not the targeted action for Ashbrook Health Systems. The distinction is the actual cause: The team uses the absence of alarms as the sole evidence of monitoring completeness.

C:

At Ashbrook Health Systems, while onboarding a device through EDA, this option proposes: The provisioned environment contains the approved fabric topology and verified network links. Although related to Event-Driven Automation and intent operations, the proposed change fits another mechanism: The orchestrator platform is confused with the intended fabric and service intent definitions. The evidence in the current case requires a different result: The known fault produces the expected observed state and alarm without false green status.

Question 783

At Ashbrook Health Systems, while onboarding a device through EDA, the data center fabric team observes: An EDA observability panel has no alerts during a test network failure. Which underlying mechanism best accounts for this symptom?

  1. Manual changes were made without accounting for intent ownership and reconciliation
  2. The EDA change plan lacks transaction traceability and pre-change intent baselines
  3. The team uses the absence of alarms as the sole evidence of monitoring completeness
  4. An accepted automation transaction was confused with actual service operational success

Explanation

Correct Answer

C:

At Ashbrook Health Systems, while onboarding a device through EDA, the evidence points to: The team uses the absence of alarms as the sole evidence of monitoring completeness. The follow-up test (The known fault produces the expected observed state and alarm without false green status) distinguishes this mechanism from a separate fabric fault.

Incorrect Answers

A:

At Ashbrook Health Systems, while onboarding a device through EDA, this option proposes: Manual changes were made without accounting for intent ownership and reconciliation. This is a valid category of fabric maintenance for another scenario (An operator pushes individual switch settings that later drift from centrally managed EDA intent), not the targeted action for Ashbrook Health Systems. The distinction is the actual cause: The team uses the absence of alarms as the sole evidence of monitoring completeness.

B:

At Ashbrook Health Systems, while onboarding a device through EDA, this option proposes: The EDA change plan lacks transaction traceability and pre-change intent baselines. Although related to Event-Driven Automation and intent operations, the proposed change fits another mechanism: The EDA change plan lacks transaction traceability and pre-change intent baselines. The evidence in the current case requires a different result: The known fault produces the expected observed state and alarm without false green status.

D:

At Ashbrook Health Systems, while onboarding a device through EDA, this option proposes: An accepted automation transaction was confused with actual service operational success. The alternative focuses on An accepted automation transaction was confused with actual service operational success, not on the stated defect. For this scenario the expected acceptance result would be: The known fault produces the expected observed state and alarm without false green status.

Question 784

At Ashbrook Health Systems, while onboarding a device through EDA, the data center fabric team observes: An EDA observability panel has no alerts during a test network failure. Which review gate should be added to prevent the same error?

  1. Use device onboarding and intent-compliance gates separately
  2. Make audited rollback readiness part of automated network change reviews
  3. Include controlled monitoring fixtures in intent-platform acceptance
  4. Check network intent results separately from Kubernetes platform health

Explanation

Correct Answer

C:

At Ashbrook Health Systems, while onboarding a device through EDA, for Ashbrook Health Systems, include the safeguard: Include controlled monitoring fixtures in intent-platform acceptance. It reduces repeat risk from the original mechanism and complements a validation of: The known fault produces the expected observed state and alarm without false green status.

Incorrect Answers

A:

At Ashbrook Health Systems, while onboarding a device through EDA, this option proposes: Use device onboarding and intent-compliance gates separately. Although related to Event-Driven Automation and intent operations, the proposed change fits another mechanism: Device discovery was mistaken for successful fabric intent realization. The evidence in the current case requires a different result: The known fault produces the expected observed state and alarm without false green status.

B:

At Ashbrook Health Systems, while onboarding a device through EDA, this option proposes: Make audited rollback readiness part of automated network change reviews. Using that approach would investigate A fabric automation rollback is planned without a documented approved state to restore instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The team uses the absence of alarms as the sole evidence of monitoring completeness.

D:

At Ashbrook Health Systems, while onboarding a device through EDA, this option proposes: Check network intent results separately from Kubernetes platform health. This option assumes the other problem (An EDA planning team assumes Kubernetes deployment alone creates fabric connectivity) is present. The case instead describes An EDA observability panel has no alerts during a test network failure, for which the causal issue is The team uses the absence of alarms as the sole evidence of monitoring completeness.

Question 785

At Oakline Energy Services, while deploying tenant-service intent, the data center fabric team observes: A tenant service deployment is considered complete because EDA accepted the requested intent. What configuration or operational change should the engineer prioritize?

  1. Reconcile the needed change through the authorized EDA fabric or service intent workflow
  2. Check EDA transaction results and end-to-end tenant service health after execution
  3. Capture approved intent and transaction state and rehearse supported recovery on a test fabric
  4. Model and validate the actual fabric intent and device onboarding requirements in EDA

Explanation

Correct Answer

B:

At Oakline Energy Services, while deploying tenant-service intent, for Oakline Energy Services, the applicable change is: Check EDA transaction results and end-to-end tenant service health after execution. The causal issue is: An accepted automation transaction was confused with actual service operational success. A successful validation would show: The intended service is realized on devices and a controlled workload flow succeeds.

Incorrect Answers

A:

At Oakline Energy Services, while deploying tenant-service intent, this option proposes: Reconcile the needed change through the authorized EDA fabric or service intent workflow. The alternative focuses on Manual changes were made without accounting for intent ownership and reconciliation, not on the stated defect. For this scenario the expected acceptance result would be: The intended service is realized on devices and a controlled workload flow succeeds.

C:

At Oakline Energy Services, while deploying tenant-service intent, this option proposes: Capture approved intent and transaction state and rehearse supported recovery on a test fabric. It tests a different symptom: A fabric automation rollback is planned without a documented approved state to restore. For the observed case, the relevant distinction is An accepted automation transaction was confused with actual service operational success, with verification: The intended service is realized on devices and a controlled workload flow succeeds.

D:

The orchestrator platform is confused with the intended fabric and service intent definitions, but here the case reports A tenant service deployment is considered complete because EDA accepted the requested intent. Here, an accepted automation transaction was confused with actual service operational success.

Question 786

At Oakline Energy Services, while deploying tenant-service intent, the data center fabric team observes: A tenant service deployment is considered complete because EDA accepted the requested intent. What test result proves the affected fabric function now works?

  1. The intended service is realized on devices and a controlled workload flow succeeds
  2. The device shows expected routed fabric links and EDA intended state after reconciliation
  3. The known fault produces the expected observed state and alarm without false green status
  4. The intended setting persists through an EDA consistency check without undocumented deviations

Explanation

Correct Answer

A:

At Oakline Energy Services, while deploying tenant-service intent, this result is the relevant closure evidence: The intended service is realized on devices and a controlled workload flow succeeds. It checks the effect of: Check EDA transaction results and end-to-end tenant service health after execution. The underlying issue was: An accepted automation transaction was confused with actual service operational success.

Incorrect Answers

B:

At Oakline Energy Services, while deploying tenant-service intent, this option proposes: The device shows expected routed fabric links and EDA intended state after reconciliation. It tests a different symptom: A newly onboarded device is visible in EDA but lacks its intended fabric configuration. For the observed case, the relevant distinction is An accepted automation transaction was confused with actual service operational success, with verification: The intended service is realized on devices and a controlled workload flow succeeds.

C:

At Oakline Energy Services, while deploying tenant-service intent, this option proposes: The known fault produces the expected observed state and alarm without false green status. The option describes a different failure mode: An EDA observability panel has no alerts during a test network failure. It would address The team uses the absence of alarms as the sole evidence of monitoring completeness, but here the case reports A tenant service deployment is considered complete because EDA accepted the requested intent. The current required evidence is: The intended service is realized on devices and a controlled workload flow succeeds.

D:

At Oakline Energy Services, while deploying tenant-service intent, this option proposes: The intended setting persists through an EDA consistency check without undocumented deviations. That choice would be more relevant when this different symptom occurs: An operator pushes individual switch settings that later drift from centrally managed EDA intent. The present scenario instead points to: An accepted automation transaction was confused with actual service operational success. The correct resolution has its own verification outcome: The intended service is realized on devices and a controlled workload flow succeeds.

Question 787

At Oakline Energy Services, while deploying tenant-service intent, the data center fabric team observes: A tenant service deployment is considered complete because EDA accepted the requested intent. What specific misconfiguration or design error is most likely?

  1. Device discovery was mistaken for successful fabric intent realization
  2. An accepted automation transaction was confused with actual service operational success
  3. The team uses the absence of alarms as the sole evidence of monitoring completeness
  4. The orchestrator platform is confused with the intended fabric and service intent definitions

Explanation

Correct Answer

B:

At Oakline Energy Services, while deploying tenant-service intent, the specific mechanism is: An accepted automation transaction was confused with actual service operational success. It explains the reported state: A tenant service deployment is considered complete because EDA accepted the requested intent. The targeted corrective action is: Check EDA transaction results and end-to-end tenant service health after execution.

Incorrect Answers

A:

At Oakline Energy Services, while deploying tenant-service intent, this option proposes: Device discovery was mistaken for successful fabric intent realization. It tests a different symptom: A newly onboarded device is visible in EDA but lacks its intended fabric configuration. For the observed case, the relevant distinction is An accepted automation transaction was confused with actual service operational success, with verification: The intended service is realized on devices and a controlled workload flow succeeds.

C:

An EDA observability panel has no alerts during a test network failure. Here, an accepted automation transaction was confused with actual service operational success.

D:

At Oakline Energy Services, while deploying tenant-service intent, this option proposes: The orchestrator platform is confused with the intended fabric and service intent definitions. This is a valid category of fabric maintenance for another scenario (An EDA planning team assumes Kubernetes deployment alone creates fabric connectivity), not the targeted action for Oakline Energy Services. The distinction is the actual cause: An accepted automation transaction was confused with actual service operational success.

Question 788

At Oakline Energy Services, while deploying tenant-service intent, the data center fabric team observes: A tenant service deployment is considered complete because EDA accepted the requested intent. What repeatable acceptance check would reduce recurrence?

  1. Check network intent results separately from Kubernetes platform health
  2. Use defined change ownership for intent-managed devices
  3. Make audited rollback readiness part of automated network change reviews
  4. Require transaction and live-network acceptance for service intent changes

Explanation

Correct Answer

D:

At Oakline Energy Services, while deploying tenant-service intent, use this repeatable control: Require transaction and live-network acceptance for service intent changes. Its scope is the problem (An accepted automation transaction was confused with actual service operational success), not an unrelated network maintenance procedure.

Incorrect Answers

A:

At Oakline Energy Services, while deploying tenant-service intent, this option proposes: Check network intent results separately from Kubernetes platform health. The option describes a different failure mode: An EDA planning team assumes Kubernetes deployment alone creates fabric connectivity. It would address The orchestrator platform is confused with the intended fabric and service intent definitions, but here the case reports A tenant service deployment is considered complete because EDA accepted the requested intent. The current required evidence is: The intended service is realized on devices and a controlled workload flow succeeds.

B:

At Oakline Energy Services, while deploying tenant-service intent, this option proposes: Use defined change ownership for intent-managed devices. That choice would be more relevant when this different symptom occurs: An operator pushes individual switch settings that later drift from centrally managed EDA intent. The present scenario instead points to: An accepted automation transaction was confused with actual service operational success. The correct resolution has its own verification outcome: The intended service is realized on devices and a controlled workload flow succeeds.

C:

At Oakline Energy Services, while deploying tenant-service intent, this option proposes: Make audited rollback readiness part of automated network change reviews. This is a valid category of fabric maintenance for another scenario (A fabric automation rollback is planned without a documented approved state to restore), not the targeted action for Oakline Energy Services. The distinction is the actual cause: An accepted automation transaction was confused with actual service operational success.

Question 789

At Windmere Health Systems, while reviewing fabric automation recovery, the data center fabric team observes: A fabric automation rollback is planned without a documented approved state to restore. Which action resolves the identified fabric-management issue?

  1. Capture approved intent and transaction state and rehearse supported recovery on a test fabric
  2. Reconcile the needed change through the authorized EDA fabric or service intent workflow
  3. Check EDA transaction results and end-to-end tenant service health after execution
  4. Apply the approved fabric intent workflow and verify resulting device configuration and state

Explanation

Correct Answer

A:

At Windmere Health Systems, while reviewing fabric automation recovery, capture approved intent and transaction state and rehearse supported recovery on a test fabric. This addresses the specific failure mechanism (The EDA change plan lacks transaction traceability and pre-change intent baselines) rather than treating only the visible alarm. The required acceptance evidence is: A failed test change can be traced and restored to the accepted intended state.

Incorrect Answers

B:

At Windmere Health Systems, while reviewing fabric automation recovery, this option proposes: Reconcile the needed change through the authorized EDA fabric or service intent workflow. Although related to Event-Driven Automation and intent operations, the proposed change fits another mechanism: Manual changes were made without accounting for intent ownership and reconciliation. The evidence in the current case requires a different result: A failed test change can be traced and restored to the accepted intended state.

C:

At Windmere Health Systems, while reviewing fabric automation recovery, this option proposes: Check EDA transaction results and end-to-end tenant service health after execution. Using that approach would investigate A tenant service deployment is considered complete because EDA accepted the requested intent instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The EDA change plan lacks transaction traceability and pre-change intent baselines.

D:

At Windmere Health Systems, while reviewing fabric automation recovery, this option proposes: Apply the approved fabric intent workflow and verify resulting device configuration and state. The alternative focuses on Device discovery was mistaken for successful fabric intent realization, not on the stated defect. For this scenario the expected acceptance result would be: A failed test change can be traced and restored to the accepted intended state.

Question 790

At Windmere Health Systems, while reviewing fabric automation recovery, the data center fabric team observes: A fabric automation rollback is planned without a documented approved state to restore. Which result would establish that the original defect has been corrected?

  1. The provisioned environment contains the approved fabric topology and verified network links
  2. The known fault produces the expected observed state and alarm without false green status
  3. The intended service is realized on devices and a controlled workload flow succeeds
  4. A failed test change can be traced and restored to the accepted intended state

Explanation

Correct Answer

D:

At Windmere Health Systems, while reviewing fabric automation recovery, a failed test change can be traced and restored to the accepted intended state. This is linked directly to the observed symptom (A fabric automation rollback is planned without a documented approved state to restore) and cannot be replaced by an unrelated healthy dashboard.

Incorrect Answers

A:

At Windmere Health Systems, while reviewing fabric automation recovery, this option proposes: The provisioned environment contains the approved fabric topology and verified network links. Although related to Event-Driven Automation and intent operations, the proposed change fits another mechanism: The orchestrator platform is confused with the intended fabric and service intent definitions. The evidence in the current case requires a different result: A failed test change can be traced and restored to the accepted intended state.

B:

At Windmere Health Systems, while reviewing fabric automation recovery, this option proposes: The known fault produces the expected observed state and alarm without false green status. Using that approach would investigate An EDA observability panel has no alerts during a test network failure instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The EDA change plan lacks transaction traceability and pre-change intent baselines.

C:

At Windmere Health Systems, while reviewing fabric automation recovery, this option proposes: The intended service is realized on devices and a controlled workload flow succeeds. The alternative focuses on An accepted automation transaction was confused with actual service operational success, not on the stated defect. For this scenario the expected acceptance result would be: A failed test change can be traced and restored to the accepted intended state.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests