McAfee-Secured Website

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

100% Nokia 4A0-D01 Guaranteed Success With Testking Training Materials

Get Real 4A0-D01 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

61 Questions & Answers with Testing Engine

"Nokia Data Center Fabric Fundamentals Exam", also known as 4A0-D01 exam, is a Nokia certification exam.

Pass your tests with the always up-to-date 4A0-D01 Exam Engine. Your 4A0-D01 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 67

Question 660

At Skyline Digital Commerce, while troubleshooting missing logs, the data center fabric team observes: A traffic capture collects sensitive unrelated tenant packets during troubleshooting. What repeatable acceptance check would reduce recurrence?

  1. Expose freshness and device state as distinct monitoring signals
  2. Check remote log delivery independently from network reachability
  3. Retain state and log context together for interface incidents
  4. Require scope approval and retention review for packet captures

Explanation

Correct Answer

D:

At Skyline Digital Commerce, while troubleshooting missing logs, use this repeatable control: Require scope approval and retention review for packet captures. Its scope is the problem (The capture filter is too broad for the authorized incident scope), not an unrelated network maintenance procedure.

Incorrect Answers

A:

At Skyline Digital Commerce, while troubleshooting missing logs, this option proposes: Expose freshness and device state as distinct monitoring signals. The option describes a different failure mode: A dashboard treats a stale telemetry timestamp as proof that a link is down. It would address Missing fresh monitoring data was confused with actual interface operational state, but here the case reports A traffic capture collects sensitive unrelated tenant packets during troubleshooting. The current required evidence is: A safe test shows only scoped packets are collected and sensitive unrelated samples are excluded.

B:

At Skyline Digital Commerce, while troubleshooting missing logs, this option proposes: Check remote log delivery independently from network reachability. That choice would be more relevant when this different symptom occurs: A remote log collector receives no fabric events despite healthy IP reachability. The present scenario instead points to: The capture filter is too broad for the authorized incident scope. The correct resolution has its own verification outcome: A safe test shows only scoped packets are collected and sensitive unrelated samples are excluded.

C:

At Skyline Digital Commerce, while troubleshooting missing logs, this option proposes: Retain state and log context together for interface incidents. This is a valid category of fabric maintenance for another scenario (An engineer cannot correlate a fabric alert to a specific interface), not the targeted action for Skyline Digital Commerce. The distinction is the actual cause: The capture filter is too broad for the authorized incident scope.

Question 661

At Riverbend Energy Services, while checking a CPM policer, the data center fabric team observes: Important SR Linux diagnostic messages disappear after a change to the logging destination. Which action resolves the identified fabric-management issue?

  1. Query the current correct interface counters and reconcile the sampling interval
  2. Capture supported detailed event data and link it with interface operational state
  3. Correct the supported logging source, severity and destination mapping
  4. Query current local interface state and assess telemetry collection separately

Explanation

Correct Answer

C:

At Riverbend Energy Services, while checking a CPM policer, choose this remediation because it targets the mechanism: The intended log source or severity does not match the configured output destination. The supported corrective action is: Correct the supported logging source, severity and destination mapping. Verification requires: A controlled event appears in the appropriate local or remote log target.

Incorrect Answers

A:

At Riverbend Energy Services, while checking a CPM policer, this option proposes: Query the current correct interface counters and reconcile the sampling interval. This is a valid category of fabric maintenance for another scenario (A fabric monitor reports low traffic despite interface counters rising sharply), not the targeted action for Riverbend Energy Services. The distinction is the actual cause: The intended log source or severity does not match the configured output destination.

B:

At Riverbend Energy Services, while checking a CPM policer, this option proposes: Capture supported detailed event data and link it with interface operational state. Although related to Logging, monitoring, filters and ACLs, the proposed change fits another mechanism: Collected logs omit relevant interface or event context. The evidence in the current case requires a different result: A controlled event appears in the appropriate local or remote log target.

D:

At Riverbend Energy Services, while checking a CPM policer, this option proposes: Query current local interface state and assess telemetry collection separately. The alternative focuses on Missing fresh monitoring data was confused with actual interface operational state, not on the stated defect. For this scenario the expected acceptance result would be: A controlled event appears in the appropriate local or remote log target.

Question 662

At Riverbend Energy Services, while checking a CPM policer, the data center fabric team observes: Important SR Linux diagnostic messages disappear after a change to the logging destination. Which result would establish that the original defect has been corrected?

  1. A controlled event appears in the appropriate local or remote log target
  2. The incident record distinguishes interface status from last-report time
  3. The authorized tenant flow succeeds without unblocking prohibited traffic elsewhere
  4. BGP control traffic remains stable while unintended control-plane floods are limited

Explanation

Correct Answer

A:

At Riverbend Energy Services, while checking a CPM policer, this result is the relevant closure evidence: A controlled event appears in the appropriate local or remote log target. It checks the effect of: Correct the supported logging source, severity and destination mapping. The underlying issue was: The intended log source or severity does not match the configured output destination.

Incorrect Answers

B:

At Riverbend Energy Services, while checking a CPM policer, this option proposes: The incident record distinguishes interface status from last-report time. Using that approach would investigate A dashboard treats a stale telemetry timestamp as proof that a link is down instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The intended log source or severity does not match the configured output destination.

C:

At Riverbend Energy Services, while checking a CPM policer, this option proposes: The authorized tenant flow succeeds without unblocking prohibited traffic elsewhere. The alternative focuses on The interface ACL was attached to the wrong logical interface or direction, not on the stated defect. For this scenario the expected acceptance result would be: A controlled event appears in the appropriate local or remote log target.

D:

At Riverbend Energy Services, while checking a CPM policer, this option proposes: BGP control traffic remains stable while unintended control-plane floods are limited. This option assumes the other problem (A CPM policer drops legitimate routing packets during a traffic burst) is present. The case instead describes Important SR Linux diagnostic messages disappear after a change to the logging destination, for which the causal issue is The intended log source or severity does not match the configured output destination.

Question 663

At Riverbend Energy Services, while checking a CPM policer, the data center fabric team observes: Important SR Linux diagnostic messages disappear after a change to the logging destination. Which root cause fits the reported state?

  1. The intended log source or severity does not match the configured output destination
  2. The permitted protocol class has an overly restrictive policing rate
  3. The interface ACL was attached to the wrong logical interface or direction
  4. System control-plane filtering was confused with the interface data-plane ACL

Explanation

Correct Answer

A:

At Riverbend Energy Services, while checking a CPM policer, for Riverbend Energy Services, investigate this cause first: The intended log source or severity does not match the configured output destination. It is directly linked to the observed symptom rather than another service issue.

Incorrect Answers

B:

At Riverbend Energy Services, while checking a CPM policer, this option proposes: The permitted protocol class has an overly restrictive policing rate. The alternative focuses on The permitted protocol class has an overly restrictive policing rate, not on the stated defect. For this scenario the expected acceptance result would be: A controlled event appears in the appropriate local or remote log target.

C:

At Riverbend Energy Services, while checking a CPM policer, this option proposes: The interface ACL was attached to the wrong logical interface or direction. This option assumes the other problem (A security change blocks permitted tenant traffic on a single subinterface) is present. The case instead describes Important SR Linux diagnostic messages disappear after a change to the logging destination, for which the causal issue is The intended log source or severity does not match the configured output destination.

D:

At Riverbend Energy Services, while checking a CPM policer, this option proposes: System control-plane filtering was confused with the interface data-plane ACL. It tests a different symptom: An engineer puts a management-plane filter on a tenant data port expecting to protect the CPU. For the observed case, the relevant distinction is The intended log source or severity does not match the configured output destination, with verification: A controlled event appears in the appropriate local or remote log target.

Question 664

At Riverbend Energy Services, while checking a CPM policer, the data center fabric team observes: Important SR Linux diagnostic messages disappear after a change to the logging destination. Which recurring validation best prevents this failure mode?

  1. Verify message categories and destinations after logging configuration changes
  2. Track interface identity and polling freshness in observability dashboards
  3. Require policy-domain classification before emergency ACL edits
  4. Review management-plane versus transit-plane filters separately

Explanation

Correct Answer

A:

At Riverbend Energy Services, while checking a CPM policer, the preventive control is: Verify message categories and destinations after logging configuration changes. It catches the same mechanism (The intended log source or severity does not match the configured output destination) before the symptom recurs. An appropriate regression observation is: A controlled event appears in the appropriate local or remote log target.

Incorrect Answers

B:

At Riverbend Energy Services, while checking a CPM policer, this option proposes: Track interface identity and polling freshness in observability dashboards. This option assumes the other problem (A fabric monitor reports low traffic despite interface counters rising sharply) is present. The case instead describes Important SR Linux diagnostic messages disappear after a change to the logging destination, for which the causal issue is The intended log source or severity does not match the configured output destination.

C:

At Riverbend Energy Services, while checking a CPM policer, this option proposes: Require policy-domain classification before emergency ACL edits. It tests a different symptom: An operator enables a broad system ACL as a quick workaround to an unrelated data-plane incident. For the observed case, the relevant distinction is The intended log source or severity does not match the configured output destination, with verification: A controlled event appears in the appropriate local or remote log target.

D:

At Riverbend Energy Services, while checking a CPM policer, this option proposes: Review management-plane versus transit-plane filters separately. The option describes a different failure mode: An engineer puts a management-plane filter on a tenant data port expecting to protect the CPU. It would address System control-plane filtering was confused with the interface data-plane ACL, but here the case reports Important SR Linux diagnostic messages disappear after a change to the logging destination. The current required evidence is: A controlled event appears in the appropriate local or remote log target.

Question 665

At Midvale Energy Services, while rolling out a scoped interface filter, the data center fabric team observes: A temporary packet capture remains enabled long after incident closure. Which targeted adjustment best corrects this behavior?

  1. Disable the unneeded capture and verify normal monitoring configuration remains
  2. Validate the approved log forwarding configuration and collector reachability
  3. Attach the intended filter only to the correct subinterface and traffic direction
  4. Correct the supported logging source, severity and destination mapping

Explanation

Correct Answer

A:

At Midvale Energy Services, while rolling out a scoped interface filter, disable the unneeded capture and verify normal monitoring configuration remains. This addresses the specific failure mechanism (The monitoring workflow has no explicit capture expiry or cleanup gate) rather than treating only the visible alarm. The required acceptance evidence is: No further unapproved packet collection occurs after closure.

Incorrect Answers

B:

At Midvale Energy Services, while rolling out a scoped interface filter, this option proposes: Validate the approved log forwarding configuration and collector reachability. The option describes a different failure mode: A remote log collector receives no fabric events despite healthy IP reachability. It would address The remote logging destination or source path was not configured correctly, but here the case reports A temporary packet capture remains enabled long after incident closure. The current required evidence is: No further unapproved packet collection occurs after closure.

C:

At Midvale Energy Services, while rolling out a scoped interface filter, this option proposes: Attach the intended filter only to the correct subinterface and traffic direction. That choice would be more relevant when this different symptom occurs: A security change blocks permitted tenant traffic on a single subinterface. The present scenario instead points to: The monitoring workflow has no explicit capture expiry or cleanup gate. The correct resolution has its own verification outcome: No further unapproved packet collection occurs after closure.

D:

At Midvale Energy Services, while rolling out a scoped interface filter, this option proposes: Correct the supported logging source, severity and destination mapping. This is a valid category of fabric maintenance for another scenario (Important SR Linux diagnostic messages disappear after a change to the logging destination), not the targeted action for Midvale Energy Services. The distinction is the actual cause: The monitoring workflow has no explicit capture expiry or cleanup gate.

Question 666

At Midvale Energy Services, while rolling out a scoped interface filter, the data center fabric team observes: A temporary packet capture remains enabled long after incident closure. What observation should be required before this case is closed?

  1. No further unapproved packet collection occurs after closure
  2. A safe test event arrives at the remote collector with expected device identity
  3. A bounded permitted test flow appears in the capture without excess unrelated traffic
  4. Unauthorized management probes are limited while permitted transit traffic remains

Explanation

Correct Answer

A:

At Midvale Energy Services, while rolling out a scoped interface filter, this result is the relevant closure evidence: No further unapproved packet collection occurs after closure. It checks the effect of: Disable the unneeded capture and verify normal monitoring configuration remains. The underlying issue was: The monitoring workflow has no explicit capture expiry or cleanup gate.

Incorrect Answers

B:

At Midvale Energy Services, while rolling out a scoped interface filter, this option proposes: A safe test event arrives at the remote collector with expected device identity. That choice would be more relevant when this different symptom occurs: A remote log collector receives no fabric events despite healthy IP reachability. The present scenario instead points to: The monitoring workflow has no explicit capture expiry or cleanup gate. The correct resolution has its own verification outcome: No further unapproved packet collection occurs after closure.

C:

At Midvale Energy Services, while rolling out a scoped interface filter, this option proposes: A bounded permitted test flow appears in the capture without excess unrelated traffic. This is a valid category of fabric maintenance for another scenario (A capture filter produces an empty trace for traffic known to cross the switch), not the targeted action for Midvale Energy Services. The distinction is the actual cause: The monitoring workflow has no explicit capture expiry or cleanup gate.

D:

At Midvale Energy Services, while rolling out a scoped interface filter, this option proposes: Unauthorized management probes are limited while permitted transit traffic remains. Although related to Logging, monitoring, filters and ACLs, the proposed change fits another mechanism: System control-plane filtering was confused with the interface data-plane ACL. The evidence in the current case requires a different result: No further unapproved packet collection occurs after closure.

Question 667

At Midvale Energy Services, while rolling out a scoped interface filter, the data center fabric team observes: A temporary packet capture remains enabled long after incident closure. What causal finding should the investigation prioritize?

  1. The remote logging destination or source path was not configured correctly
  2. The interface ACL was attached to the wrong logical interface or direction
  3. Collected logs omit relevant interface or event context
  4. The monitoring workflow has no explicit capture expiry or cleanup gate

Explanation

Correct Answer

D:

At Midvale Energy Services, while rolling out a scoped interface filter, the monitoring workflow has no explicit capture expiry or cleanup gate. That is the cause of the described failure, and a corrective check should demonstrate: No further unapproved packet collection occurs after closure.

Incorrect Answers

A:

At Midvale Energy Services, while rolling out a scoped interface filter, this option proposes: The remote logging destination or source path was not configured correctly. That choice would be more relevant when this different symptom occurs: A remote log collector receives no fabric events despite healthy IP reachability. The present scenario instead points to: The monitoring workflow has no explicit capture expiry or cleanup gate. The correct resolution has its own verification outcome: No further unapproved packet collection occurs after closure.

B:

At Midvale Energy Services, while rolling out a scoped interface filter, this option proposes: The interface ACL was attached to the wrong logical interface or direction. This is a valid category of fabric maintenance for another scenario (A security change blocks permitted tenant traffic on a single subinterface), not the targeted action for Midvale Energy Services. The distinction is the actual cause: The monitoring workflow has no explicit capture expiry or cleanup gate.

C:

At Midvale Energy Services, while rolling out a scoped interface filter, this option proposes: Collected logs omit relevant interface or event context. Although related to Logging, monitoring, filters and ACLs, the proposed change fits another mechanism: Collected logs omit relevant interface or event context. The evidence in the current case requires a different result: No further unapproved packet collection occurs after closure.

Question 668

At Midvale Energy Services, while rolling out a scoped interface filter, the data center fabric team observes: A temporary packet capture remains enabled long after incident closure. What ongoing operational safeguard directly addresses this root issue?

  1. Check remote log delivery independently from network reachability
  2. Retain state and log context together for interface incidents
  3. Apply time-bounded authorization and cleanup checks to traffic captures
  4. Review management-plane versus transit-plane filters separately

Explanation

Correct Answer

C:

At Midvale Energy Services, while rolling out a scoped interface filter, for Midvale Energy Services, include the safeguard: Apply time-bounded authorization and cleanup checks to traffic captures. It reduces repeat risk from the original mechanism and complements a validation of: No further unapproved packet collection occurs after closure.

Incorrect Answers

A:

At Midvale Energy Services, while rolling out a scoped interface filter, this option proposes: Check remote log delivery independently from network reachability. This is a valid category of fabric maintenance for another scenario (A remote log collector receives no fabric events despite healthy IP reachability), not the targeted action for Midvale Energy Services. The distinction is the actual cause: The monitoring workflow has no explicit capture expiry or cleanup gate.

B:

At Midvale Energy Services, while rolling out a scoped interface filter, this option proposes: Retain state and log context together for interface incidents. Although related to Logging, monitoring, filters and ACLs, the proposed change fits another mechanism: Collected logs omit relevant interface or event context. The evidence in the current case requires a different result: No further unapproved packet collection occurs after closure.

D:

At Midvale Energy Services, while rolling out a scoped interface filter, this option proposes: Review management-plane versus transit-plane filters separately. The alternative focuses on System control-plane filtering was confused with the interface data-plane ACL, not on the stated defect. For this scenario the expected acceptance result would be: No further unapproved packet collection occurs after closure.

Question 669

At Windmere Rail Logistics, while examining control-plane telemetry, the data center fabric team observes: A dashboard treats a stale telemetry timestamp as proof that a link is down. Which supported remediation most directly addresses the stated failure?

  1. Query current local interface state and assess telemetry collection separately
  2. Correct the supported logging source, severity and destination mapping
  3. Restore the scoped data-plane investigation and leave approved system ACL limits intact
  4. Restrict the capture to the approved interface and traffic predicates with retention controls

Explanation

Correct Answer

A:

At Windmere Rail Logistics, while examining control-plane telemetry, query current local interface state and assess telemetry collection separately. This addresses the specific failure mechanism (Missing fresh monitoring data was confused with actual interface operational state) rather than treating only the visible alarm. The required acceptance evidence is: The incident record distinguishes interface status from last-report time.

Incorrect Answers

B:

At Windmere Rail Logistics, while examining control-plane telemetry, this option proposes: Correct the supported logging source, severity and destination mapping. The alternative focuses on The intended log source or severity does not match the configured output destination, not on the stated defect. For this scenario the expected acceptance result would be: The incident record distinguishes interface status from last-report time.

C:

At Windmere Rail Logistics, while examining control-plane telemetry, this option proposes: Restore the scoped data-plane investigation and leave approved system ACL limits intact. This option assumes the other problem (An operator enables a broad system ACL as a quick workaround to an unrelated data-plane incident) is present. The case instead describes A dashboard treats a stale telemetry timestamp as proof that a link is down, for which the causal issue is Missing fresh monitoring data was confused with actual interface operational state.

D:

At Windmere Rail Logistics, while examining control-plane telemetry, this option proposes: Restrict the capture to the approved interface and traffic predicates with retention controls. It tests a different symptom: A traffic capture collects sensitive unrelated tenant packets during troubleshooting. For the observed case, the relevant distinction is Missing fresh monitoring data was confused with actual interface operational state, with verification: The incident record distinguishes interface status from last-report time.

Question 670

At Windmere Rail Logistics, while examining control-plane telemetry, the data center fabric team observes: A dashboard treats a stale telemetry timestamp as proof that a link is down. Which evidence directly validates the intended repair?

  1. A safe test shows only scoped packets are collected and sensitive unrelated samples are excluded
  2. The denied test packet is dropped while an approved control packet passes
  3. BGP control traffic remains stable while unintended control-plane floods are limited
  4. The incident record distinguishes interface status from last-report time

Explanation

Correct Answer

D:

At Windmere Rail Logistics, while examining control-plane telemetry, the incident record distinguishes interface status from last-report time. This is linked directly to the observed symptom (A dashboard treats a stale telemetry timestamp as proof that a link is down) and cannot be replaced by an unrelated healthy dashboard.

Incorrect Answers

A:

At Windmere Rail Logistics, while examining control-plane telemetry, this option proposes: A safe test shows only scoped packets are collected and sensitive unrelated samples are excluded. The alternative focuses on The capture filter is too broad for the authorized incident scope, not on the stated defect. For this scenario the expected acceptance result would be: The incident record distinguishes interface status from last-report time.

B:

At Windmere Rail Logistics, while examining control-plane telemetry, this option proposes: The denied test packet is dropped while an approved control packet passes. This option assumes the other problem (An interface ingress ACL permits traffic that should match a deny entry) is present. The case instead describes A dashboard treats a stale telemetry timestamp as proof that a link is down, for which the causal issue is Missing fresh monitoring data was confused with actual interface operational state.

C:

At Windmere Rail Logistics, while examining control-plane telemetry, this option proposes: BGP control traffic remains stable while unintended control-plane floods are limited. It tests a different symptom: A CPM policer drops legitimate routing packets during a traffic burst. For the observed case, the relevant distinction is Missing fresh monitoring data was confused with actual interface operational state, with verification: The incident record distinguishes interface status from last-report time.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests