McAfee-Secured Website

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

100% Nokia 4A0-D01 Guaranteed Success With Testking Training Materials

Get Real 4A0-D01 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

61 Questions & Answers with Testing Engine

"Nokia Data Center Fabric Fundamentals Exam", also known as 4A0-D01 exam, is a Nokia certification exam.

Pass your tests with the always up-to-date 4A0-D01 Exam Engine. Your 4A0-D01 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 65

Question 640

At Cloudgate Municipal Networks, while reviewing a packet-capture request, the data center fabric team observes: A fabric monitor reports low traffic despite interface counters rising sharply. Which review gate should be added to prevent the same error?

  1. Verify message categories and destinations after logging configuration changes
  2. Track interface identity and polling freshness in observability dashboards
  3. Include legitimate control-plane burst tests in policer acceptance
  4. Validate capture match expressions before incident collection

Explanation

Correct Answer

B:

At Cloudgate Municipal Networks, while reviewing a packet-capture request, track interface identity and polling freshness in observability dashboards. This ongoing review specifically addresses: The monitoring view reads an incorrect interface or outdated statistics sample. It should remain part of change acceptance, not only incident closure.

Incorrect Answers

A:

At Cloudgate Municipal Networks, while reviewing a packet-capture request, this option proposes: Verify message categories and destinations after logging configuration changes. It tests a different symptom: Important SR Linux diagnostic messages disappear after a change to the logging destination. For the observed case, the relevant distinction is The monitoring view reads an incorrect interface or outdated statistics sample, with verification: Sampled counters match observed permitted test traffic within the expected interval.

C:

At Cloudgate Municipal Networks, while reviewing a packet-capture request, this option proposes: Include legitimate control-plane burst tests in policer acceptance. That choice would be more relevant when this different symptom occurs: A CPM policer drops legitimate routing packets during a traffic burst. The present scenario instead points to: The monitoring view reads an incorrect interface or outdated statistics sample. The correct resolution has its own verification outcome: Sampled counters match observed permitted test traffic within the expected interval.

D:

At Cloudgate Municipal Networks, while reviewing a packet-capture request, this option proposes: Validate capture match expressions before incident collection. This is a valid category of fabric maintenance for another scenario (A capture filter produces an empty trace for traffic known to cross the switch), not the targeted action for Cloudgate Municipal Networks. The distinction is the actual cause: The monitoring view reads an incorrect interface or outdated statistics sample.

Question 641

At Suncrest Energy Services, while validating rule match counters, the data center fabric team observes: Important SR Linux diagnostic messages disappear after a change to the logging destination. What configuration or operational change should the engineer prioritize?

  1. Restrict the capture to the approved interface and traffic predicates with retention controls
  2. Review safe routing-control-plane bandwidth needs and adjust the scoped policer
  3. Query current local interface state and assess telemetry collection separately
  4. Correct the supported logging source, severity and destination mapping

Explanation

Correct Answer

D:

At Suncrest Energy Services, while validating rule match counters, the targeted correction is: Correct the supported logging source, severity and destination mapping. The reported symptom is explained by: The intended log source or severity does not match the configured output destination. Confirm the change by testing this outcome: A controlled event appears in the appropriate local or remote log target.

Incorrect Answers

A:

At Suncrest Energy Services, while validating rule match counters, this option proposes: Restrict the capture to the approved interface and traffic predicates with retention controls. That choice would be more relevant when this different symptom occurs: A traffic capture collects sensitive unrelated tenant packets during troubleshooting. The present scenario instead points to: The intended log source or severity does not match the configured output destination. The correct resolution has its own verification outcome: A controlled event appears in the appropriate local or remote log target.

B:

At Suncrest Energy Services, while validating rule match counters, this option proposes: Review safe routing-control-plane bandwidth needs and adjust the scoped policer. This is a valid category of fabric maintenance for another scenario (A CPM policer drops legitimate routing packets during a traffic burst), not the targeted action for Suncrest Energy Services. The distinction is the actual cause: The intended log source or severity does not match the configured output destination.

C:

At Suncrest Energy Services, while validating rule match counters, this option proposes: Query current local interface state and assess telemetry collection separately. Although related to Logging, monitoring, filters and ACLs, the proposed change fits another mechanism: Missing fresh monitoring data was confused with actual interface operational state. The evidence in the current case requires a different result: A controlled event appears in the appropriate local or remote log target.

Question 642

At Suncrest Energy Services, while validating rule match counters, the data center fabric team observes: Important SR Linux diagnostic messages disappear after a change to the logging destination. What test result proves the affected fabric function now works?

  1. Unauthorized management probes are limited while permitted transit traffic remains
  2. A controlled event appears in the appropriate local or remote log target
  3. A safe test shows only scoped packets are collected and sensitive unrelated samples are excluded
  4. Management restrictions remain in effect while the tenant forwarding defect is resolved

Explanation

Correct Answer

B:

At Suncrest Energy Services, while validating rule match counters, for Suncrest Energy Services, accept the repair only after this observation: A controlled event appears in the appropriate local or remote log target. The test distinguishes real recovery from a superficial status change.

Incorrect Answers

A:

At Suncrest Energy Services, while validating rule match counters, this option proposes: Unauthorized management probes are limited while permitted transit traffic remains. This is a valid category of fabric maintenance for another scenario (An engineer puts a management-plane filter on a tenant data port expecting to protect the CPU), not the targeted action for Suncrest Energy Services. The distinction is the actual cause: The intended log source or severity does not match the configured output destination.

C:

At Suncrest Energy Services, while validating rule match counters, this option proposes: A safe test shows only scoped packets are collected and sensitive unrelated samples are excluded. Using that approach would investigate A traffic capture collects sensitive unrelated tenant packets during troubleshooting instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The intended log source or severity does not match the configured output destination.

D:

At Suncrest Energy Services, while validating rule match counters, this option proposes: Management restrictions remain in effect while the tenant forwarding defect is resolved. The alternative focuses on The proposed control change conflates management access policy with tenant forwarding policy, not on the stated defect. For this scenario the expected acceptance result would be: A controlled event appears in the appropriate local or remote log target.

Question 643

At Suncrest Energy Services, while validating rule match counters, the data center fabric team observes: Important SR Linux diagnostic messages disappear after a change to the logging destination. What specific misconfiguration or design error is most likely?

  1. Collected logs omit relevant interface or event context
  2. The intended log source or severity does not match the configured output destination
  3. System control-plane filtering was confused with the interface data-plane ACL
  4. Missing fresh monitoring data was confused with actual interface operational state

Explanation

Correct Answer

B:

At Suncrest Energy Services, while validating rule match counters, the specific mechanism is: The intended log source or severity does not match the configured output destination. It explains the reported state: Important SR Linux diagnostic messages disappear after a change to the logging destination. The targeted corrective action is: Correct the supported logging source, severity and destination mapping.

Incorrect Answers

A:

At Suncrest Energy Services, while validating rule match counters, this option proposes: Collected logs omit relevant interface or event context. Although related to Logging, monitoring, filters and ACLs, the proposed change fits another mechanism: Collected logs omit relevant interface or event context. The evidence in the current case requires a different result: A controlled event appears in the appropriate local or remote log target.

C:

At Suncrest Energy Services, while validating rule match counters, this option proposes: System control-plane filtering was confused with the interface data-plane ACL. The alternative focuses on System control-plane filtering was confused with the interface data-plane ACL, not on the stated defect. For this scenario the expected acceptance result would be: A controlled event appears in the appropriate local or remote log target.

D:

At Suncrest Energy Services, while validating rule match counters, this option proposes: Missing fresh monitoring data was confused with actual interface operational state. This option assumes the other problem (A dashboard treats a stale telemetry timestamp as proof that a link is down) is present. The case instead describes Important SR Linux diagnostic messages disappear after a change to the logging destination, for which the causal issue is The intended log source or severity does not match the configured output destination.

Question 644

At Suncrest Energy Services, while validating rule match counters, the data center fabric team observes: Important SR Linux diagnostic messages disappear after a change to the logging destination. What repeatable acceptance check would reduce recurrence?

  1. Verify message categories and destinations after logging configuration changes
  2. Require scope approval and retention review for packet captures
  3. Track interface identity and polling freshness in observability dashboards
  4. Expose freshness and device state as distinct monitoring signals

Explanation

Correct Answer

A:

At Suncrest Energy Services, while validating rule match counters, the preventive control is: Verify message categories and destinations after logging configuration changes. It catches the same mechanism (The intended log source or severity does not match the configured output destination) before the symptom recurs. An appropriate regression observation is: A controlled event appears in the appropriate local or remote log target.

Incorrect Answers

B:

At Suncrest Energy Services, while validating rule match counters, this option proposes: Require scope approval and retention review for packet captures. The alternative focuses on The capture filter is too broad for the authorized incident scope, not on the stated defect. For this scenario the expected acceptance result would be: A controlled event appears in the appropriate local or remote log target.

C:

At Suncrest Energy Services, while validating rule match counters, this option proposes: Track interface identity and polling freshness in observability dashboards. This option assumes the other problem (A fabric monitor reports low traffic despite interface counters rising sharply) is present. The case instead describes Important SR Linux diagnostic messages disappear after a change to the logging destination, for which the causal issue is The intended log source or severity does not match the configured output destination.

D:

At Suncrest Energy Services, while validating rule match counters, this option proposes: Expose freshness and device state as distinct monitoring signals. It tests a different symptom: A dashboard treats a stale telemetry timestamp as proof that a link is down. For the observed case, the relevant distinction is The intended log source or severity does not match the configured output destination, with verification: A controlled event appears in the appropriate local or remote log target.

Question 645

At Granitebay Rail Logistics, while checking a CPM policer, the data center fabric team observes: A dashboard treats a stale telemetry timestamp as proof that a link is down. Which action resolves the identified fabric-management issue?

  1. Correct the supported capture-filter match and measurement scope
  2. Restrict the capture to the approved interface and traffic predicates with retention controls
  3. Correct the approved ingress ACL match and evaluation order
  4. Query current local interface state and assess telemetry collection separately

Explanation

Correct Answer

D:

At Granitebay Rail Logistics, while checking a CPM policer, the targeted correction is: Query current local interface state and assess telemetry collection separately. The reported symptom is explained by: Missing fresh monitoring data was confused with actual interface operational state. Confirm the change by testing this outcome: The incident record distinguishes interface status from last-report time.

Incorrect Answers

A:

At Granitebay Rail Logistics, while checking a CPM policer, this option proposes: Correct the supported capture-filter match and measurement scope. This option assumes the other problem (A capture filter produces an empty trace for traffic known to cross the switch) is present. The case instead describes A dashboard treats a stale telemetry timestamp as proof that a link is down, for which the causal issue is Missing fresh monitoring data was confused with actual interface operational state.

B:

At Granitebay Rail Logistics, while checking a CPM policer, this option proposes: Restrict the capture to the approved interface and traffic predicates with retention controls. It tests a different symptom: A traffic capture collects sensitive unrelated tenant packets during troubleshooting. For the observed case, the relevant distinction is Missing fresh monitoring data was confused with actual interface operational state, with verification: The incident record distinguishes interface status from last-report time.

C:

At Granitebay Rail Logistics, while checking a CPM policer, this option proposes: Correct the approved ingress ACL match and evaluation order. The option describes a different failure mode: An interface ingress ACL permits traffic that should match a deny entry. It would address The applicable ACL entry order or match fields do not implement the intended policy, but here the case reports A dashboard treats a stale telemetry timestamp as proof that a link is down. The current required evidence is: The incident record distinguishes interface status from last-report time.

Question 646

At Granitebay Rail Logistics, while checking a CPM policer, the data center fabric team observes: A dashboard treats a stale telemetry timestamp as proof that a link is down. Which result would establish that the original defect has been corrected?

  1. A safe test shows only scoped packets are collected and sensitive unrelated samples are excluded
  2. A controlled test packet increases the intended rule counter and follows the selected action
  3. Control-plane rate counters reflect the permitted and rate-limited probe behavior
  4. The incident record distinguishes interface status from last-report time

Explanation

Correct Answer

D:

At Granitebay Rail Logistics, while checking a CPM policer, the incident record distinguishes interface status from last-report time. This is linked directly to the observed symptom (A dashboard treats a stale telemetry timestamp as proof that a link is down) and cannot be replaced by an unrelated healthy dashboard.

Incorrect Answers

A:

At Granitebay Rail Logistics, while checking a CPM policer, this option proposes: A safe test shows only scoped packets are collected and sensitive unrelated samples are excluded. It tests a different symptom: A traffic capture collects sensitive unrelated tenant packets during troubleshooting. For the observed case, the relevant distinction is Missing fresh monitoring data was confused with actual interface operational state, with verification: The incident record distinguishes interface status from last-report time.

B:

At Granitebay Rail Logistics, while checking a CPM policer, this option proposes: A controlled test packet increases the intended rule counter and follows the selected action. The option describes a different failure mode: An ACL change is committed but counters indicate no matching packets. It would address The test traffic does not traverse the attached interface or match the rule fields, but here the case reports A dashboard treats a stale telemetry timestamp as proof that a link is down. The current required evidence is: The incident record distinguishes interface status from last-report time.

C:

At Granitebay Rail Logistics, while checking a CPM policer, this option proposes: Control-plane rate counters reflect the permitted and rate-limited probe behavior. That choice would be more relevant when this different symptom occurs: The CPM receives excessive unmatched traffic despite a configured filter. The present scenario instead points to: Missing fresh monitoring data was confused with actual interface operational state. The correct resolution has its own verification outcome: The incident record distinguishes interface status from last-report time.

Question 647

At Granitebay Rail Logistics, while checking a CPM policer, the data center fabric team observes: A dashboard treats a stale telemetry timestamp as proof that a link is down. Which root cause fits the reported state?

  1. The permitted protocol class has an overly restrictive policing rate
  2. The CPM-filter or its policer does not match the intended control-plane traffic class
  3. Missing fresh monitoring data was confused with actual interface operational state
  4. The test traffic does not traverse the attached interface or match the rule fields

Explanation

Correct Answer

C:

At Granitebay Rail Logistics, while checking a CPM policer, the evidence points to: Missing fresh monitoring data was confused with actual interface operational state. The follow-up test (The incident record distinguishes interface status from last-report time) distinguishes this mechanism from a separate fabric fault.

Incorrect Answers

A:

At Granitebay Rail Logistics, while checking a CPM policer, this option proposes: The permitted protocol class has an overly restrictive policing rate. The option describes a different failure mode: A CPM policer drops legitimate routing packets during a traffic burst. It would address The permitted protocol class has an overly restrictive policing rate, but here the case reports A dashboard treats a stale telemetry timestamp as proof that a link is down. The current required evidence is: The incident record distinguishes interface status from last-report time.

B:

At Granitebay Rail Logistics, while checking a CPM policer, this option proposes: The CPM-filter or its policer does not match the intended control-plane traffic class. That choice would be more relevant when this different symptom occurs: The CPM receives excessive unmatched traffic despite a configured filter. The present scenario instead points to: Missing fresh monitoring data was confused with actual interface operational state. The correct resolution has its own verification outcome: The incident record distinguishes interface status from last-report time.

D:

At Granitebay Rail Logistics, while checking a CPM policer, this option proposes: The test traffic does not traverse the attached interface or match the rule fields. Although related to Logging, monitoring, filters and ACLs, the proposed change fits another mechanism: The test traffic does not traverse the attached interface or match the rule fields. The evidence in the current case requires a different result: The incident record distinguishes interface status from last-report time.

Question 648

At Granitebay Rail Logistics, while checking a CPM policer, the data center fabric team observes: A dashboard treats a stale telemetry timestamp as proof that a link is down. Which recurring validation best prevents this failure mode?

  1. Validate capture match expressions before incident collection
  2. Expose freshness and device state as distinct monitoring signals
  3. Maintain positive and negative ACL tests for protected interfaces
  4. Verify message categories and destinations after logging configuration changes

Explanation

Correct Answer

B:

At Granitebay Rail Logistics, while checking a CPM policer, expose freshness and device state as distinct monitoring signals. This ongoing review specifically addresses: Missing fresh monitoring data was confused with actual interface operational state. It should remain part of change acceptance, not only incident closure.

Incorrect Answers

A:

At Granitebay Rail Logistics, while checking a CPM policer, this option proposes: Validate capture match expressions before incident collection. That choice would be more relevant when this different symptom occurs: A capture filter produces an empty trace for traffic known to cross the switch. The present scenario instead points to: Missing fresh monitoring data was confused with actual interface operational state. The correct resolution has its own verification outcome: The incident record distinguishes interface status from last-report time.

C:

At Granitebay Rail Logistics, while checking a CPM policer, this option proposes: Maintain positive and negative ACL tests for protected interfaces. Although related to Logging, monitoring, filters and ACLs, the proposed change fits another mechanism: The applicable ACL entry order or match fields do not implement the intended policy. The evidence in the current case requires a different result: The incident record distinguishes interface status from last-report time.

D:

At Granitebay Rail Logistics, while checking a CPM policer, this option proposes: Verify message categories and destinations after logging configuration changes. Using that approach would investigate Important SR Linux diagnostic messages disappear after a change to the logging destination instead. No evidence for that separate failure is supplied here; the reported case is consistent with: Missing fresh monitoring data was confused with actual interface operational state.

Question 649

At Cloudgate Health Systems, while correlating interface counters, the data center fabric team observes: An interface ingress ACL permits traffic that should match a deny entry. Which targeted adjustment best corrects this behavior?

  1. Query the current correct interface counters and reconcile the sampling interval
  2. Restore the scoped data-plane investigation and leave approved system ACL limits intact
  3. Correct the approved ingress ACL match and evaluation order
  4. Disable the unneeded capture and verify normal monitoring configuration remains

Explanation

Correct Answer

C:

At Cloudgate Health Systems, while correlating interface counters, choose this remediation because it targets the mechanism: The applicable ACL entry order or match fields do not implement the intended policy. The supported corrective action is: Correct the approved ingress ACL match and evaluation order. Verification requires: The denied test packet is dropped while an approved control packet passes.

Incorrect Answers

A:

At Cloudgate Health Systems, while correlating interface counters, this option proposes: Query the current correct interface counters and reconcile the sampling interval. Although related to Logging, monitoring, filters and ACLs, the proposed change fits another mechanism: The monitoring view reads an incorrect interface or outdated statistics sample. The evidence in the current case requires a different result: The denied test packet is dropped while an approved control packet passes.

B:

At Cloudgate Health Systems, while correlating interface counters, this option proposes: Restore the scoped data-plane investigation and leave approved system ACL limits intact. Using that approach would investigate An operator enables a broad system ACL as a quick workaround to an unrelated data-plane incident instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The applicable ACL entry order or match fields do not implement the intended policy.

D:

At Cloudgate Health Systems, while correlating interface counters, this option proposes: Disable the unneeded capture and verify normal monitoring configuration remains. This option assumes the other problem (A temporary packet capture remains enabled long after incident closure) is present. The case instead describes An interface ingress ACL permits traffic that should match a deny entry, for which the causal issue is The applicable ACL entry order or match fields do not implement the intended policy.

Question 650

At Cloudgate Health Systems, while correlating interface counters, the data center fabric team observes: An interface ingress ACL permits traffic that should match a deny entry. What observation should be required before this case is closed?

  1. A safe test shows only scoped packets are collected and sensitive unrelated samples are excluded
  2. The report clearly associates a configured admin value and actual oper value to their paths
  3. The denied test packet is dropped while an approved control packet passes
  4. The authorized tenant flow succeeds without unblocking prohibited traffic elsewhere

Explanation

Correct Answer

C:

At Cloudgate Health Systems, while correlating interface counters, the decisive validation is: The denied test packet is dropped while an approved control packet passes. It verifies that the change (Correct the approved ingress ACL match and evaluation order) resolved the mechanism: The applicable ACL entry order or match fields do not implement the intended policy.

Incorrect Answers

A:

At Cloudgate Health Systems, while correlating interface counters, this option proposes: A safe test shows only scoped packets are collected and sensitive unrelated samples are excluded. Using that approach would investigate A traffic capture collects sensitive unrelated tenant packets during troubleshooting instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The applicable ACL entry order or match fields do not implement the intended policy.

B:

At Cloudgate Health Systems, while correlating interface counters, this option proposes: The report clearly associates a configured admin value and actual oper value to their paths. The alternative focuses on The collection pipeline merges configured and operational paths without identifying their source, not on the stated defect. For this scenario the expected acceptance result would be: The denied test packet is dropped while an approved control packet passes.

D:

At Cloudgate Health Systems, while correlating interface counters, this option proposes: The authorized tenant flow succeeds without unblocking prohibited traffic elsewhere. It tests a different symptom: A security change blocks permitted tenant traffic on a single subinterface. For the observed case, the relevant distinction is The applicable ACL entry order or match fields do not implement the intended policy, with verification: The denied test packet is dropped while an approved control packet passes.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests