Question 240
At Brightwater Energy Services, while committing an SR Linux configuration change, the data center fabric team observes: A junior operator tries to use a command copied from a different network operating system. Which review gate should be added to prevent the same error?
Explanation
Correct Answer
At Brightwater Energy Services, while committing an SR Linux configuration change, use this repeatable control: Keep release-specific command examples and avoid vendor CLI substitution. Its scope is the problem (The intended SR Linux CLI is YANG model-driven and has a different configuration hierarchy), not an unrelated network maintenance procedure.
Incorrect Answers
At Brightwater Energy Services, while committing an SR Linux configuration change, this option proposes: Test dual-stack families independently on every service turn-up. Although related to SR Linux CLI, model configuration and interfaces, the proposed change fits another mechanism: The subinterface or IP-VRF lacks the intended IPv6 address or route information. The evidence in the current case requires a different result: The intended leaf setting appears under the correct model and passes a controlled commit.
At Brightwater Energy Services, while committing an SR Linux configuration change, this option proposes: Require tested checkpoints for changes with material reachability risk. Using that approach would investigate An engineer makes a risky multi-node edit without saving a known-good baseline instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The intended SR Linux CLI is YANG model-driven and has a different configuration hierarchy.
At Brightwater Energy Services, while committing an SR Linux configuration change, this option proposes: Update physical-to-logical interface mappings after hardware changes. The alternative focuses on The old physical port mapping was reused without reconciling current interface identifiers, not on the stated defect. For this scenario the expected acceptance result would be: The intended leaf setting appears under the correct model and passes a controlled commit.