McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 110

Question 1090

Within Routing Policy and Firewall Filters, a Junos engineer proposes the following response: Use supported strict unicast reverse-path forwarding verification. Which concept or operating procedure is best illustrated?

  1. Firewall filter versus routing policy
  2. Policy match protocol
  3. Policy term evaluation order
  4. Unicast RPF strict mode

Explanation

Correct Answer

D:

Strict uRPF checks whether the routing table's return path to the source points back through the packet's ingress interface. This meets the stated need for unicast rpf strict mode.

Incorrect Answers

A:

The firewall filter versus routing policy scenario has a different requirement: Firewall filters evaluate packets while routing policies influence route learning or advertisement. It does not directly meet the unicast rpf strict mode need in this question.

B:

The policy match protocol scenario has a different requirement: The from protocol match selects routes based on their protocol origin. It does not directly meet the unicast rpf strict mode need in this question.

C:

The policy term evaluation order scenario has a different requirement: Policy terms are evaluated in configured order, so earlier terminating actions can prevent later terms being reached. It does not directly meet the unicast rpf strict mode need in this question.

Question 1091

An ingress interface should reject packets whose source would not be reached through that same best return interface. The proposed response is: Use supported strict unicast reverse-path forwarding verification. Which explanation most accurately supports this response?

  1. Strict uRPF checks whether the routing table's return path to the source points back through the packet's ingress interface.
  2. Firewall filters evaluate packets while routing policies influence route learning or advertisement.
  3. The from protocol match selects routes based on their protocol origin.
  4. Policy terms are evaluated in configured order, so earlier terminating actions can prevent later terms being reached.

Explanation

Correct Answer

A:

Strict uRPF checks whether the routing table's return path to the source points back through the packet's ingress interface. This meets the stated need for unicast rpf strict mode.

Incorrect Answers

B:

The firewall filter versus routing policy scenario has a different requirement: Firewall filters evaluate packets while routing policies influence route learning or advertisement. It does not directly meet the unicast rpf strict mode need in this question.

C:

The policy match protocol scenario has a different requirement: The from protocol match selects routes based on their protocol origin. It does not directly meet the unicast rpf strict mode need in this question.

D:

The policy term evaluation order scenario has a different requirement: Policy terms are evaluated in configured order, so earlier terminating actions can prevent later terms being reached. It does not directly meet the unicast rpf strict mode need in this question.

Question 1092

Within Routing Policy and Firewall Filters, a technician selects this approach: Use supported strict unicast reverse-path forwarding verification. Which original requirement or fault would most directly justify it?

  1. A network engineer wants to block unwanted TCP packets arriving at an interface, not reject learned prefixes.
  2. An export policy must treat static routes differently from OSPF-learned routes.
  3. Two routing policy terms match overlapping route sets and give conflicting actions.
  4. An ingress interface should reject packets whose source would not be reached through that same best return interface.

Explanation

Correct Answer

D:

Strict uRPF checks whether the routing table's return path to the source points back through the packet's ingress interface. This meets the stated need for unicast rpf strict mode.

Incorrect Answers

A:

The firewall filter versus routing policy scenario has a different requirement: Firewall filters evaluate packets while routing policies influence route learning or advertisement. It does not directly meet the unicast rpf strict mode need in this question.

B:

The policy match protocol scenario has a different requirement: The from protocol match selects routes based on their protocol origin. It does not directly meet the unicast rpf strict mode need in this question.

C:

The policy term evaluation order scenario has a different requirement: Policy terms are evaluated in configured order, so earlier terminating actions can prevent later terms being reached. It does not directly meet the unicast rpf strict mode need in this question.

Question 1093

A multihomed edge sees asymmetric paths but should still drop packets with wholly unroutable source addresses. Which configuration or troubleshooting action most directly meets the need?

  1. Create ordered terms under firewall family inet filter with from and then statements.
  2. Use a from protocol tcp condition in the firewall filter term.
  3. Use supported loose unicast reverse-path verification where appropriate.
  4. Attach the firewall filter as an input filter to the intended family inet interface.

Explanation

Correct Answer

C:

Loose uRPF generally requires a viable source route without insisting on the exact ingress interface, accommodating asymmetry. This meets the stated need for unicast rpf loose mode.

Incorrect Answers

A:

The firewall filter term structure scenario has a different requirement: Junos firewall filters organize packet match conditions and actions into ordered terms. It does not directly meet the unicast rpf loose mode need in this question.

B:

The firewall protocol tcp match scenario has a different requirement: The protocol condition matches the IP protocol field rather than an application's name. It does not directly meet the unicast rpf loose mode need in this question.

D:

The input versus output attachment scenario has a different requirement: The input direction applies filter logic to packets entering the associated interface. It does not directly meet the unicast rpf loose mode need in this question.

Question 1094

Within Routing Policy and Firewall Filters, a Junos engineer proposes the following response: Use supported loose unicast reverse-path verification where appropriate. Which concept or operating procedure is best illustrated?

  1. Unicast RPF loose mode
  2. Firewall filter term structure
  3. Firewall protocol TCP match
  4. Input versus output attachment

Explanation

Correct Answer

A:

Loose uRPF generally requires a viable source route without insisting on the exact ingress interface, accommodating asymmetry. This meets the stated need for unicast rpf loose mode.

Incorrect Answers

B:

The firewall filter term structure scenario has a different requirement: Junos firewall filters organize packet match conditions and actions into ordered terms. It does not directly meet the unicast rpf loose mode need in this question.

C:

The firewall protocol tcp match scenario has a different requirement: The protocol condition matches the IP protocol field rather than an application's name. It does not directly meet the unicast rpf loose mode need in this question.

D:

The input versus output attachment scenario has a different requirement: The input direction applies filter logic to packets entering the associated interface. It does not directly meet the unicast rpf loose mode need in this question.

Question 1095

A multihomed edge sees asymmetric paths but should still drop packets with wholly unroutable source addresses. The proposed response is: Use supported loose unicast reverse-path verification where appropriate. Which explanation most accurately supports this response?

  1. Loose uRPF generally requires a viable source route without insisting on the exact ingress interface, accommodating asymmetry.
  2. Junos firewall filters organize packet match conditions and actions into ordered terms.
  3. The protocol condition matches the IP protocol field rather than an application's name.
  4. The input direction applies filter logic to packets entering the associated interface.

Explanation

Correct Answer

A:

Loose uRPF generally requires a viable source route without insisting on the exact ingress interface, accommodating asymmetry. This meets the stated need for unicast rpf loose mode.

Incorrect Answers

B:

The firewall filter term structure scenario has a different requirement: Junos firewall filters organize packet match conditions and actions into ordered terms. It does not directly meet the unicast rpf loose mode need in this question.

C:

The firewall protocol tcp match scenario has a different requirement: The protocol condition matches the IP protocol field rather than an application's name. It does not directly meet the unicast rpf loose mode need in this question.

D:

The input versus output attachment scenario has a different requirement: The input direction applies filter logic to packets entering the associated interface. It does not directly meet the unicast rpf loose mode need in this question.

Question 1096

Within Routing Policy and Firewall Filters, a technician selects this approach: Use supported loose unicast reverse-path verification where appropriate. Which original requirement or fault would most directly justify it?

  1. A stateless IPv4 packet filter needs several named match-and-action rules.
  2. A stateless filter should match TCP sessions while leaving UDP to other terms.
  3. A filter should inspect packets as they arrive at an IPv4 logical interface, before routing onward.
  4. A multihomed edge sees asymmetric paths but should still drop packets with wholly unroutable source addresses.

Explanation

Correct Answer

D:

Loose uRPF generally requires a viable source route without insisting on the exact ingress interface, accommodating asymmetry. This meets the stated need for unicast rpf loose mode.

Incorrect Answers

A:

The firewall filter term structure scenario has a different requirement: Junos firewall filters organize packet match conditions and actions into ordered terms. It does not directly meet the unicast rpf loose mode need in this question.

B:

The firewall protocol tcp match scenario has a different requirement: The protocol condition matches the IP protocol field rather than an application's name. It does not directly meet the unicast rpf loose mode need in this question.

C:

The input versus output attachment scenario has a different requirement: The input direction applies filter logic to packets entering the associated interface. It does not directly meet the unicast rpf loose mode need in this question.

Question 1097

A network architect wants to prevent a BGP peer from learning a private prefix while keeping local packet processing unchanged. Which configuration or troubleshooting action most directly meets the need?

  1. Use supported strict unicast reverse-path forwarding verification.
  2. Apply a routing export-policy deny term rather than a transit firewall filter.
  3. Attach the firewall filter as an input filter to the intended family inet interface.
  4. Define a prefix-list and reference it from appropriate from prefix-list terms.

Explanation

Correct Answer

B:

An export policy controls routing announcements; a firewall filter alone cannot remove the prefix from BGP advertisements. This meets the stated need for route policy versus packet filter impact.

Incorrect Answers

A:

The unicast rpf strict mode scenario has a different requirement: Strict uRPF checks whether the routing table's return path to the source points back through the packet's ingress interface. It does not directly meet the route policy versus packet filter impact need in this question.

C:

The input versus output attachment scenario has a different requirement: The input direction applies filter logic to packets entering the associated interface. It does not directly meet the route policy versus packet filter impact need in this question.

D:

The prefix-list policy match scenario has a different requirement: A prefix list groups prefixes so route-matching policies can share a maintained set of network entries. It does not directly meet the route policy versus packet filter impact need in this question.

Question 1098

Within Routing Policy and Firewall Filters, a Junos engineer proposes the following response: Apply a routing export-policy deny term rather than a transit firewall filter. Which concept or operating procedure is best illustrated?

  1. Route policy versus packet filter impact
  2. Unicast RPF strict mode
  3. Input versus output attachment
  4. Prefix-list policy match

Explanation

Correct Answer

A:

An export policy controls routing announcements; a firewall filter alone cannot remove the prefix from BGP advertisements. This meets the stated need for route policy versus packet filter impact.

Incorrect Answers

B:

The unicast rpf strict mode scenario has a different requirement: Strict uRPF checks whether the routing table's return path to the source points back through the packet's ingress interface. It does not directly meet the route policy versus packet filter impact need in this question.

C:

The input versus output attachment scenario has a different requirement: The input direction applies filter logic to packets entering the associated interface. It does not directly meet the route policy versus packet filter impact need in this question.

D:

The prefix-list policy match scenario has a different requirement: A prefix list groups prefixes so route-matching policies can share a maintained set of network entries. It does not directly meet the route policy versus packet filter impact need in this question.

Question 1099

A network architect wants to prevent a BGP peer from learning a private prefix while keeping local packet processing unchanged. The proposed response is: Apply a routing export-policy deny term rather than a transit firewall filter. Which explanation most accurately supports this response?

  1. Strict uRPF checks whether the routing table's return path to the source points back through the packet's ingress interface.
  2. The input direction applies filter logic to packets entering the associated interface.
  3. A prefix list groups prefixes so route-matching policies can share a maintained set of network entries.
  4. An export policy controls routing announcements; a firewall filter alone cannot remove the prefix from BGP advertisements.

Explanation

Correct Answer

D:

An export policy controls routing announcements; a firewall filter alone cannot remove the prefix from BGP advertisements. This meets the stated need for route policy versus packet filter impact.

Incorrect Answers

A:

The unicast rpf strict mode scenario has a different requirement: Strict uRPF checks whether the routing table's return path to the source points back through the packet's ingress interface. It does not directly meet the route policy versus packet filter impact need in this question.

B:

The input versus output attachment scenario has a different requirement: The input direction applies filter logic to packets entering the associated interface. It does not directly meet the route policy versus packet filter impact need in this question.

C:

The prefix-list policy match scenario has a different requirement: A prefix list groups prefixes so route-matching policies can share a maintained set of network entries. It does not directly meet the route policy versus packet filter impact need in this question.

Question 1100

Within Routing Policy and Firewall Filters, a technician selects this approach: Apply a routing export-policy deny term rather than a transit firewall filter. Which original requirement or fault would most directly justify it?

  1. An ingress interface should reject packets whose source would not be reached through that same best return interface.
  2. A filter should inspect packets as they arrive at an IPv4 logical interface, before routing onward.
  3. A network architect wants to prevent a BGP peer from learning a private prefix while keeping local packet processing unchanged.
  4. Several approved customer prefixes should be reused by more than one routing policy.

Explanation

Correct Answer

C:

An export policy controls routing announcements; a firewall filter alone cannot remove the prefix from BGP advertisements. This meets the stated need for route policy versus packet filter impact.

Incorrect Answers

A:

The unicast rpf strict mode scenario has a different requirement: Strict uRPF checks whether the routing table's return path to the source points back through the packet's ingress interface. It does not directly meet the route policy versus packet filter impact need in this question.

B:

The input versus output attachment scenario has a different requirement: The input direction applies filter logic to packets entering the associated interface. It does not directly meet the route policy versus packet filter impact need in this question.

D:

The prefix-list policy match scenario has a different requirement: A prefix list groups prefixes so route-matching policies can share a maintained set of network entries. It does not directly meet the route policy versus packet filter impact need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests