McAfee-Secured Website

Exam Code: NSE7_SSE_AR-26

Exam Name: Fortinet NSE 7 - FortiSASE 26 Architect

Certification Provider: Fortinet

100% Fortinet NSE7_SSE_AR-26 Guaranteed Success With Testking Training Materials

Get Real NSE7_SSE_AR-26 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

50 Questions & Answers with Testing Engine

"Fortinet NSE 7 - FortiSASE 26 Architect Exam", also known as NSE7_SSE_AR-26 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE7_SSE_AR-26 Exam Engine. Your NSE7_SSE_AR-26 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE7_SSE_AR-26 Practice Test 22

Question 210

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A field branch is meant to form temporary direct ADVPN paths to another branch, but only permanent hub-spoke IPsec configuration is in place. After the correction is implemented, which observable result most specifically proves this incident was resolved?

  1. The video subnet can traverse either hub's encrypted overlay during failover.
  2. A branch-to-branch test establishes an authorized shortcut and avoids unnecessary hub forwarding.
  3. Both overlay adjacencies exchange approved routes and failover traffic reaches hub services.
  4. Only authorized tenant prefixes are advertised to each spoke after the filter update.

Explanation

Correct Answer

B:

This result directly tests whether the observed failure has cleared: A field branch is meant to form temporary direct ADVPN paths to another branch, but only permanent hub-spoke IPsec configuration is in place. It confirms the targeted change, Implement the required ADVPN discovery and shortcut design rather than assuming ordinary hub tunnels create dynamic shortcuts, rather than a healthy but unrelated component. The technical cause under test is: The overlay lacks the dynamic discovery behavior needed for spoke-to-spoke optimization.

Incorrect Answers

A:

That observation verifies a different Deploy advanced IPsec for SD-WAN condition, namely: A hub failover design assumes every spoke can reach the second hub, but its backup IPsec selectors omit a newly introduced video subnet. It could be true even if the current failure persists. In this case the decisive evidence is tied to: The overlay lacks the dynamic discovery behavior needed for spoke-to-spoke optimization.

C:

That observation verifies a different Deploy advanced IPsec for SD-WAN condition, namely: A hub-and-spoke deployment has two overlay tunnels but only one BGP neighbor defined, so traffic from the backup overlay cannot learn hub service routes. It could be true even if the current failure persists. In this case the decisive evidence is tied to: The overlay lacks the dynamic discovery behavior needed for spoke-to-spoke optimization.

D:

That observation verifies a different Deploy advanced IPsec for SD-WAN condition, namely: A multitenant hub leaks a customer-only subnet into another spoke's overlay route list after a broad BGP export rule change. It could be true even if the current failure persists. In this case the decisive evidence is tied to: The overlay lacks the dynamic discovery behavior needed for spoke-to-spoke optimization.

Question 211

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A field branch is meant to form temporary direct ADVPN paths to another branch, but only permanent hub-spoke IPsec configuration is in place. Which underlying technical cause best explains this precise observed failure?

  1. Control-plane route distribution was configured for only one of the data-plane overlays.
  2. The export policy disregards isolation boundaries between overlays.
  3. The overlay lacks the dynamic discovery behavior needed for spoke-to-spoke optimization.
  4. The backup tunnel policy covers an older set of applications and misses the new subnet.

Explanation

Correct Answer

C:

This mechanism directly accounts for the observed condition: A field branch is meant to form temporary direct ADVPN paths to another branch, but only permanent hub-spoke IPsec configuration is in place. The aligned correction is: Implement the required ADVPN discovery and shortcut design rather than assuming ordinary hub tunnels create dynamic shortcuts. A confirming result is: A branch-to-branch test establishes an authorized shortcut and avoids unnecessary hub forwarding.

Incorrect Answers

A:

This explanation corresponds to an alternative failure context: A hub-and-spoke deployment has two overlay tunnels but only one BGP neighbor defined, so traffic from the backup overlay cannot learn hub service routes. It does not account for the particular evidence in the question. The cause actually associated with the described condition is: The overlay lacks the dynamic discovery behavior needed for spoke-to-spoke optimization.

B:

This explanation corresponds to an alternative failure context: A multitenant hub leaks a customer-only subnet into another spoke's overlay route list after a broad BGP export rule change. It does not account for the particular evidence in the question. The cause actually associated with the described condition is: The overlay lacks the dynamic discovery behavior needed for spoke-to-spoke optimization.

D:

This explanation corresponds to an alternative failure context: A hub failover design assumes every spoke can reach the second hub, but its backup IPsec selectors omit a newly introduced video subnet. It does not account for the particular evidence in the question. The cause actually associated with the described condition is: The overlay lacks the dynamic discovery behavior needed for spoke-to-spoke optimization.

Question 212

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A field branch is meant to form temporary direct ADVPN paths to another branch, but only permanent hub-spoke IPsec configuration is in place. Which sustained control would best prevent this same failure from recurring?

  1. Review overlay route advertisements for cross-tenant leakage on every major routing-policy update.
  2. Audit selectors and prefixes across primary and secondary overlays after application expansion.
  3. Compare BGP neighbor inventory to active overlay tunnels before site handoff.
  4. Test shortcut establishment and fallback through the hub for each ADVPN deployment profile.

Explanation

Correct Answer

D:

This guard addresses the recurring failure mode demonstrated by the case: The overlay lacks the dynamic discovery behavior needed for spoke-to-spoke optimization. It guards the same affected workflow, rather than merely checking that some other service works. A successful controlled outcome would be: A branch-to-branch test establishes an authorized shortcut and avoids unnecessary hub forwarding.

Incorrect Answers

A:

This control is relevant to another scenario in the stated requirement, specifically: A multitenant hub leaks a customer-only subnet into another spoke's overlay route list after a broad BGP export rule change. It would not prevent the present mechanism: The overlay lacks the dynamic discovery behavior needed for spoke-to-spoke optimization. Prevention must be linked to that actual failure mode rather than a generic adjacent control.

B:

This control is relevant to another scenario in the stated requirement, specifically: A hub failover design assumes every spoke can reach the second hub, but its backup IPsec selectors omit a newly introduced video subnet. It would not prevent the present mechanism: The overlay lacks the dynamic discovery behavior needed for spoke-to-spoke optimization. Prevention must be linked to that actual failure mode rather than a generic adjacent control.

C:

This control is relevant to another scenario in the stated requirement, specifically: A hub-and-spoke deployment has two overlay tunnels but only one BGP neighbor defined, so traffic from the backup overlay cannot learn hub service routes. It would not prevent the present mechanism: The overlay lacks the dynamic discovery behavior needed for spoke-to-spoke optimization. Prevention must be linked to that actual failure mode rather than a generic adjacent control.

Question 213

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A new spoke cannot negotiate its overlay because its encryption proposals do not overlap those approved on the datacenter peer. Given this specific Fortinet deployment or fault, which action should the engineer prioritize to resolve the reported condition?

  1. Use appropriate overlay stickiness and SLA policy while keeping failover for genuine impairment.
  2. Align negotiated IPsec proposals and authentication parameters with the approved hub profile.
  3. Verify overlay routing adjacencies, advertised prefixes and forwarding routes rather than rebuilding working encryption.
  4. Build resilient loopback reachability across intended overlays before depending on loopback BGP sessions.

Explanation

Correct Answer

B:

This is the intended corrective decision for the described condition: A new spoke cannot negotiate its overlay because its encryption proposals do not overlap those approved on the datacenter peer. The underlying issue is that Phase negotiation fails when peers lack a compatible protected-channel configuration After this action, the specific acceptance evidence should be: IKE and IPsec security associations establish using an approved common proposal.

Incorrect Answers

A:

This is a plausible action for another Deploy advanced IPsec for SD-WAN situation: A video production site shifts between two otherwise healthy overlay links during short traffic bursts, disrupting streams that require path consistency. Its target cause is: Selection behavior reacts to transient conditions without honoring application continuity needs. The present case instead needs to address: Phase negotiation fails when peers lack a compatible protected-channel configuration. It does not directly remediate the actual observed failure.

C:

This is a plausible action for another Deploy advanced IPsec for SD-WAN situation: An IPsec branch tunnel reports phase 2 up but the application prefix has not been exchanged over BGP, leaving the service unreachable. Its target cause is: Tunnel encryption is established but the route distribution for the destination is incomplete. The present case instead needs to address: Phase negotiation fails when peers lack a compatible protected-channel configuration. It does not directly remediate the actual observed failure.

D:

This is a plausible action for another Deploy advanced IPsec for SD-WAN situation: A large multispoke design uses loopback-based BGP to reduce per-tunnel peering but lacks reliable reachability to peer loopbacks during underlay failure. Its target cause is: Loopback peers depend on transit reachability that was never established on the alternate path. The present case instead needs to address: Phase negotiation fails when peers lack a compatible protected-channel configuration. It does not directly remediate the actual observed failure.

Question 214

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A new spoke cannot negotiate its overlay because its encryption proposals do not overlap those approved on the datacenter peer. After the correction is implemented, which observable result most specifically proves this incident was resolved?

  1. BGP exchanges the required application subnet and test traffic traverses the existing protected tunnel.
  2. Peer loopbacks remain reachable and route exchange recovers on the permitted backup overlay.
  3. IKE and IPsec security associations establish using an approved common proposal.
  4. Streams retain a stable healthy overlay during short bursts and change path when the sustained SLA truly fails.

Explanation

Correct Answer

C:

This result directly tests whether the observed failure has cleared: A new spoke cannot negotiate its overlay because its encryption proposals do not overlap those approved on the datacenter peer. It confirms the targeted change, Align negotiated IPsec proposals and authentication parameters with the approved hub profile, rather than a healthy but unrelated component. The technical cause under test is: Phase negotiation fails when peers lack a compatible protected-channel configuration.

Incorrect Answers

A:

That observation verifies a different Deploy advanced IPsec for SD-WAN condition, namely: An IPsec branch tunnel reports phase 2 up but the application prefix has not been exchanged over BGP, leaving the service unreachable. It could be true even if the current failure persists. In this case the decisive evidence is tied to: Phase negotiation fails when peers lack a compatible protected-channel configuration.

B:

That observation verifies a different Deploy advanced IPsec for SD-WAN condition, namely: A large multispoke design uses loopback-based BGP to reduce per-tunnel peering but lacks reliable reachability to peer loopbacks during underlay failure. It could be true even if the current failure persists. In this case the decisive evidence is tied to: Phase negotiation fails when peers lack a compatible protected-channel configuration.

D:

That observation verifies a different Deploy advanced IPsec for SD-WAN condition, namely: A video production site shifts between two otherwise healthy overlay links during short traffic bursts, disrupting streams that require path consistency. It could be true even if the current failure persists. In this case the decisive evidence is tied to: Phase negotiation fails when peers lack a compatible protected-channel configuration.

Question 215

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A new spoke cannot negotiate its overlay because its encryption proposals do not overlap those approved on the datacenter peer. Which underlying technical cause best explains this precise observed failure?

  1. Loopback peers depend on transit reachability that was never established on the alternate path.
  2. Selection behavior reacts to transient conditions without honoring application continuity needs.
  3. Tunnel encryption is established but the route distribution for the destination is incomplete.
  4. Phase negotiation fails when peers lack a compatible protected-channel configuration.

Explanation

Correct Answer

D:

This mechanism directly accounts for the observed condition: A new spoke cannot negotiate its overlay because its encryption proposals do not overlap those approved on the datacenter peer. The aligned correction is: Align negotiated IPsec proposals and authentication parameters with the approved hub profile. A confirming result is: IKE and IPsec security associations establish using an approved common proposal.

Incorrect Answers

A:

This explanation corresponds to an alternative failure context: A large multispoke design uses loopback-based BGP to reduce per-tunnel peering but lacks reliable reachability to peer loopbacks during underlay failure. It does not account for the particular evidence in the question. The cause actually associated with the described condition is: Phase negotiation fails when peers lack a compatible protected-channel configuration.

B:

This explanation corresponds to an alternative failure context: A video production site shifts between two otherwise healthy overlay links during short traffic bursts, disrupting streams that require path consistency. It does not account for the particular evidence in the question. The cause actually associated with the described condition is: Phase negotiation fails when peers lack a compatible protected-channel configuration.

C:

This explanation corresponds to an alternative failure context: An IPsec branch tunnel reports phase 2 up but the application prefix has not been exchanged over BGP, leaving the service unreachable. It does not account for the particular evidence in the question. The cause actually associated with the described condition is: Phase negotiation fails when peers lack a compatible protected-channel configuration.

Question 216

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A new spoke cannot negotiate its overlay because its encryption proposals do not overlap those approved on the datacenter peer. Which sustained control would best prevent this same failure from recurring?

  1. Use centrally validated overlay profiles instead of hand-built inconsistent proposal sets.
  2. Include long-lived stream tests in SD-WAN overlay-steering validations.
  3. Test both tunnel state and dynamic route reachability in deployment acceptance.
  4. Document loopback transport dependencies in resilient BGP-on-overlay designs.

Explanation

Correct Answer

A:

This guard addresses the recurring failure mode demonstrated by the case: Phase negotiation fails when peers lack a compatible protected-channel configuration. It guards the same affected workflow, rather than merely checking that some other service works. A successful controlled outcome would be: IKE and IPsec security associations establish using an approved common proposal.

Incorrect Answers

B:

This control is relevant to another scenario in the stated requirement, specifically: A video production site shifts between two otherwise healthy overlay links during short traffic bursts, disrupting streams that require path consistency. It would not prevent the present mechanism: Phase negotiation fails when peers lack a compatible protected-channel configuration. Prevention must be linked to that actual failure mode rather than a generic adjacent control.

C:

This control is relevant to another scenario in the stated requirement, specifically: An IPsec branch tunnel reports phase 2 up but the application prefix has not been exchanged over BGP, leaving the service unreachable. It would not prevent the present mechanism: Phase negotiation fails when peers lack a compatible protected-channel configuration. Prevention must be linked to that actual failure mode rather than a generic adjacent control.

D:

This control is relevant to another scenario in the stated requirement, specifically: A large multispoke design uses loopback-based BGP to reduce per-tunnel peering but lacks reliable reachability to peer loopbacks during underlay failure. It would not prevent the present mechanism: Phase negotiation fails when peers lack a compatible protected-channel configuration. Prevention must be linked to that actual failure mode rather than a generic adjacent control.

Question 217

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A remote site uses two ISPs but has both IPsec overlay peers pinned to the same primary ISP source address. Given this specific Fortinet deployment or fault, which action should the engineer prioritize to resolve the reported condition?

  1. Expand the approved backup protected traffic selectors and route policy for the new subnet.
  2. Configure routing adjacency on the intended second overlay and apply appropriate route policy.
  3. Build or correct each approved overlay's underlay binding so independent carriers can carry backup tunnels.
  4. Implement the required ADVPN discovery and shortcut design rather than assuming ordinary hub tunnels create dynamic shortcuts.

Explanation

Correct Answer

C:

This is the intended corrective decision for the described condition: A remote site uses two ISPs but has both IPsec overlay peers pinned to the same primary ISP source address. The underlying issue is that Logical tunnel duplication does not provide physical resilience when both tunnels share one failed underlay After this action, the specific acceptance evidence should be: Disconnecting the primary ISP preserves at least one functional tunnel and learned service routes.

Incorrect Answers

A:

This is a plausible action for another Deploy advanced IPsec for SD-WAN situation: A hub failover design assumes every spoke can reach the second hub, but its backup IPsec selectors omit a newly introduced video subnet. Its target cause is: The backup tunnel policy covers an older set of applications and misses the new subnet. The present case instead needs to address: Logical tunnel duplication does not provide physical resilience when both tunnels share one failed underlay. It does not directly remediate the actual observed failure.

B:

This is a plausible action for another Deploy advanced IPsec for SD-WAN situation: A hub-and-spoke deployment has two overlay tunnels but only one BGP neighbor defined, so traffic from the backup overlay cannot learn hub service routes. Its target cause is: Control-plane route distribution was configured for only one of the data-plane overlays. The present case instead needs to address: Logical tunnel duplication does not provide physical resilience when both tunnels share one failed underlay. It does not directly remediate the actual observed failure.

D:

This is a plausible action for another Deploy advanced IPsec for SD-WAN situation: A field branch is meant to form temporary direct ADVPN paths to another branch, but only permanent hub-spoke IPsec configuration is in place. Its target cause is: The overlay lacks the dynamic discovery behavior needed for spoke-to-spoke optimization. The present case instead needs to address: Logical tunnel duplication does not provide physical resilience when both tunnels share one failed underlay. It does not directly remediate the actual observed failure.

Question 218

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A remote site uses two ISPs but has both IPsec overlay peers pinned to the same primary ISP source address. After the correction is implemented, which observable result most specifically proves this incident was resolved?

  1. Both overlay adjacencies exchange approved routes and failover traffic reaches hub services.
  2. A branch-to-branch test establishes an authorized shortcut and avoids unnecessary hub forwarding.
  3. The video subnet can traverse either hub's encrypted overlay during failover.
  4. Disconnecting the primary ISP preserves at least one functional tunnel and learned service routes.

Explanation

Correct Answer

D:

This result directly tests whether the observed failure has cleared: A remote site uses two ISPs but has both IPsec overlay peers pinned to the same primary ISP source address. It confirms the targeted change, Build or correct each approved overlay's underlay binding so independent carriers can carry backup tunnels, rather than a healthy but unrelated component. The technical cause under test is: Logical tunnel duplication does not provide physical resilience when both tunnels share one failed underlay.

Incorrect Answers

A:

That observation verifies a different Deploy advanced IPsec for SD-WAN condition, namely: A hub-and-spoke deployment has two overlay tunnels but only one BGP neighbor defined, so traffic from the backup overlay cannot learn hub service routes. It could be true even if the current failure persists. In this case the decisive evidence is tied to: Logical tunnel duplication does not provide physical resilience when both tunnels share one failed underlay.

B:

That observation verifies a different Deploy advanced IPsec for SD-WAN condition, namely: A field branch is meant to form temporary direct ADVPN paths to another branch, but only permanent hub-spoke IPsec configuration is in place. It could be true even if the current failure persists. In this case the decisive evidence is tied to: Logical tunnel duplication does not provide physical resilience when both tunnels share one failed underlay.

C:

That observation verifies a different Deploy advanced IPsec for SD-WAN condition, namely: A hub failover design assumes every spoke can reach the second hub, but its backup IPsec selectors omit a newly introduced video subnet. It could be true even if the current failure persists. In this case the decisive evidence is tied to: Logical tunnel duplication does not provide physical resilience when both tunnels share one failed underlay.

Question 219

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A remote site uses two ISPs but has both IPsec overlay peers pinned to the same primary ISP source address. Which underlying technical cause best explains this precise observed failure?

  1. Logical tunnel duplication does not provide physical resilience when both tunnels share one failed underlay.
  2. The overlay lacks the dynamic discovery behavior needed for spoke-to-spoke optimization.
  3. The backup tunnel policy covers an older set of applications and misses the new subnet.
  4. Control-plane route distribution was configured for only one of the data-plane overlays.

Explanation

Correct Answer

A:

This mechanism directly accounts for the observed condition: A remote site uses two ISPs but has both IPsec overlay peers pinned to the same primary ISP source address. The aligned correction is: Build or correct each approved overlay's underlay binding so independent carriers can carry backup tunnels. A confirming result is: Disconnecting the primary ISP preserves at least one functional tunnel and learned service routes.

Incorrect Answers

B:

This explanation corresponds to an alternative failure context: A field branch is meant to form temporary direct ADVPN paths to another branch, but only permanent hub-spoke IPsec configuration is in place. It does not account for the particular evidence in the question. The cause actually associated with the described condition is: Logical tunnel duplication does not provide physical resilience when both tunnels share one failed underlay.

C:

This explanation corresponds to an alternative failure context: A hub failover design assumes every spoke can reach the second hub, but its backup IPsec selectors omit a newly introduced video subnet. It does not account for the particular evidence in the question. The cause actually associated with the described condition is: Logical tunnel duplication does not provide physical resilience when both tunnels share one failed underlay.

D:

This explanation corresponds to an alternative failure context: A hub-and-spoke deployment has two overlay tunnels but only one BGP neighbor defined, so traffic from the backup overlay cannot learn hub service routes. It does not account for the particular evidence in the question. The cause actually associated with the described condition is: Logical tunnel duplication does not provide physical resilience when both tunnels share one failed underlay.

Question 220

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A remote site uses two ISPs but has both IPsec overlay peers pinned to the same primary ISP source address. Which sustained control would best prevent this same failure from recurring?

  1. Audit selectors and prefixes across primary and secondary overlays after application expansion.
  2. Inspect common physical dependencies during overlay redundancy reviews.
  3. Compare BGP neighbor inventory to active overlay tunnels before site handoff.
  4. Test shortcut establishment and fallback through the hub for each ADVPN deployment profile.

Explanation

Correct Answer

B:

This guard addresses the recurring failure mode demonstrated by the case: Logical tunnel duplication does not provide physical resilience when both tunnels share one failed underlay. It guards the same affected workflow, rather than merely checking that some other service works. A successful controlled outcome would be: Disconnecting the primary ISP preserves at least one functional tunnel and learned service routes.

Incorrect Answers

A:

This control is relevant to another scenario in the stated requirement, specifically: A hub failover design assumes every spoke can reach the second hub, but its backup IPsec selectors omit a newly introduced video subnet. It would not prevent the present mechanism: Logical tunnel duplication does not provide physical resilience when both tunnels share one failed underlay. Prevention must be linked to that actual failure mode rather than a generic adjacent control.

C:

This control is relevant to another scenario in the stated requirement, specifically: A hub-and-spoke deployment has two overlay tunnels but only one BGP neighbor defined, so traffic from the backup overlay cannot learn hub service routes. It would not prevent the present mechanism: Logical tunnel duplication does not provide physical resilience when both tunnels share one failed underlay. Prevention must be linked to that actual failure mode rather than a generic adjacent control.

D:

This control is relevant to another scenario in the stated requirement, specifically: A field branch is meant to form temporary direct ADVPN paths to another branch, but only permanent hub-spoke IPsec configuration is in place. It would not prevent the present mechanism: Logical tunnel duplication does not provide physical resilience when both tunnels share one failed underlay. Prevention must be linked to that actual failure mode rather than a generic adjacent control.

Fortinet NSE 7 - FortiSASE 26 Architect (NSE7_SSE_AR-26) Practice Tests