McAfee-Secured Website

Exam Code: NSE4_FGT_AD-7.6

Exam Name: Fortinet NSE 4 - FortiOS 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE4

100% Fortinet NSE4_FGT_AD-7.6 Guaranteed Success With Testking Training Materials

Get Real NSE4_FGT_AD-7.6 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

94 Questions & Answers with Testing Engine

"Fortinet NSE 4 - FortiOS 7.6 Administrator Exam", also known as NSE4_FGT_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE4_FGT_AD-7.6 Exam Engine. Your NSE4_FGT_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE4_FGT_AD-7.6 Practice Test 56

Question 550

An operations review is verifying a FortiOS 7.6 change. Original problem: A branch's site-to-site VPN fails only after an external IP change and the remote device still targets the old gateway address. The selected remediation was: Correct the remote gateway address or supported dynamic peer-discovery method and verify underlay routing. Which observation best proves that the requirement to update remote peer reachability for the changed public endpoint has actually been achieved?

  1. New-subnet test flows encrypt through the intended tunnel and return while older flows still work.
  2. The route lookup selects the IPsec interface and tunnel encrypt counters increase when branch users connect.
  3. IKE packets exit the specified WAN and the peer establishes the appropriate Phase 1 SA.
  4. Remote IKE traffic reaches the new public endpoint and a Phase 1 SA establishes.

Explanation

Correct Answer

D:

Network capture and IKE negotiation prove the peer was rediscovered. This is the decisive acceptance evidence for the requirement to update remote peer reachability for the changed public endpoint.

Incorrect Answers

A:

New and existing subnet checks prove safe extension.

B:

Forwarding and encryption evidence confirms correct route insertion.

C:

Capturing the underlay and SA confirms the gateway path.

Question 551

A tunnel sometimes remains marked up after an ISP path silently fails, preventing timely traffic failover to a second peer. The administrator must use dead-peer detection to identify unreachable peers. Which action most directly satisfies the requirement?

  1. Add the supported remote subnet to Phase 2 selector coverage and a matching static route and security policies.
  2. Set both peers to a mutually supported IKE protocol version and recheck security proposals.
  3. Configure a second route-based IPsec peer/tunnel through the backup ISP and establish route failover preference.
  4. Configure compatible IKE DPD behavior and a suitable route/tunnel failover design.

Explanation

Correct Answer

D:

DPD detects loss of IKE peer responsiveness rather than trusting stale SA state. In the stated configuration, this directly meets the requirement to use dead-peer detection to identify unreachable peers.

Incorrect Answers

A:

New private destinations require compatible selectors and forwarding/authorization, not just an existing SA.

B:

A Phase 1 version mismatch prevents a negotiated IKE security association.

C:

Tunnel redundancy requires independent underlay reachability and corresponding routes.

Question 552

An operations review is verifying a FortiOS 7.6 change. Original problem: A tunnel sometimes remains marked up after an ISP path silently fails, preventing timely traffic failover to a second peer. The selected remediation was: Configure compatible IKE DPD behavior and a suitable route/tunnel failover design. Which observation best proves that the requirement to use dead-peer detection to identify unreachable peers has actually been achieved?

  1. On simulated peer loss, failure is detected and protected traffic moves to the available backup path.
  2. With primary WAN disconnected, the secondary tunnel comes up and approved private sessions resume.
  3. The route lookup selects the IPsec interface and tunnel encrypt counters increase when branch users connect.
  4. Both peers report the same negotiated IKE version and an authenticated Phase 1 SA.

Explanation

Correct Answer

A:

DPD and new-route evidence verify failure handling. This is the decisive acceptance evidence for the requirement to use dead-peer detection to identify unreachable peers.

Incorrect Answers

B:

Actual underlay failure and restored protected traffic prove redundancy.

C:

Forwarding and encryption evidence confirms correct route insertion.

D:

Protocol and SA confirmation isolate the mismatch.

Question 553

After a tunnel rekey, Phase 2 fails intermittently because one FortiGate uses a proposal that the other no longer supports. The administrator must align Phase 2 rekey proposal configuration. Which action most directly satisfies the requirement?

  1. Review and configure overlapping Phase 2 encryption, integrity and PFS settings across both peers.
  2. Set both peers to a mutually supported IKE protocol version and recheck security proposals.
  3. Configure an agreed secure IKE Phase 1 proposal on both FortiGate peers.
  4. Configure matching supported PFS and associated Phase 2 cryptographic parameters on the peers.

Explanation

Correct Answer

A:

Initial IKE formation does not guarantee later CHILD SA negotiation succeeds. In the stated configuration, this directly meets the requirement to align Phase 2 rekey proposal configuration.

Incorrect Answers

B:

A Phase 1 version mismatch prevents a negotiated IKE security association.

C:

Phase 1 requires overlapping algorithm and transform proposals before an IKE SA can form.

D:

Phase 2 must agree on PFS and other selectors/proposals to form an IPsec SA.

Question 554

An operations review is verifying a FortiOS 7.6 change. Original problem: After a tunnel rekey, Phase 2 fails intermittently because one FortiGate uses a proposal that the other no longer supports. The selected remediation was: Review and configure overlapping Phase 2 encryption, integrity and PFS settings across both peers. Which observation best proves that the requirement to align Phase 2 rekey proposal configuration has actually been achieved?

  1. Multiple rekeys complete with compatible Phase 2 SAs and no interrupted protected traffic.
  2. IKE logs show a mutually selected encryption/integrity proposal and the IKE SA establishes.
  3. IKE packets exit the specified WAN and the peer establishes the appropriate Phase 1 SA.
  4. Phase 2 negotiation completes and decrypt counters rise during the test connection.

Explanation

Correct Answer

A:

Repeated SA renewal tests ongoing negotiation, not just first establishment. This is the decisive acceptance evidence for the requirement to align Phase 2 rekey proposal configuration.

Incorrect Answers

B:

Negotiated transform evidence confirms more than interface reachability.

C:

Capturing the underlay and SA confirms the gateway path.

D:

Negotiated child SA and decrypted packets identify the actual correction.

Question 555

A headquarters firewall receives tunnel packets from a branch but cannot match the Phase 2 selectors because the branch's local /24 was accidentally configured as /16. The administrator must correct the branch's protected subnet prefix. Which action most directly satisfies the requirement?

  1. Configure matching compatible local and remote selectors for the intended protected subnet pair.
  2. Set the appropriate remote selector to 172.20.7.0/24 with its reciprocal peer definition.
  3. Change the branch Phase 2 local selector to the intended /24 and align HQ's reciprocal remote selector.
  4. Configure the supported automatic negotiation option for the IPsec Phase 2 SA where appropriate.

Explanation

Correct Answer

C:

Phase 2 selector scope must match the actual protected networks and peer expectations. In the stated configuration, this directly meets the requirement to correct the branch's protected subnet prefix.

Incorrect Answers

A:

A healthy IKE SA cannot carry protected data when Phase 2 selectors do not match the negotiated flow.

B:

Subnet selector precision limits which traffic is eligible for this IPsec SA.

D:

Traffic-triggered SA setup can delay first packets; auto-negotiation requests establish the child SA in advance.

Question 556

An operations review is verifying a FortiOS 7.6 change. Original problem: A headquarters firewall receives tunnel packets from a branch but cannot match the Phase 2 selectors because the branch's local /24 was accidentally configured as /16. The selected remediation was: Change the branch Phase 2 local selector to the intended /24 and align HQ's reciprocal remote selector. Which observation best proves that the requirement to correct the branch's protected subnet prefix has actually been achieved?

  1. The approved /24 communicates over the tunnel and a separate /16 subnet does not enter the same SA.
  2. The negotiated child SA lists the exact /24 and test hosts in that subnet communicate securely.
  3. Phase 2 SA displays the expected local/remote selector pair and data packets encrypt.
  4. Diagnostic output identifies the failing phase and the correct fix allows both IKE and Phase 2 SAs to establish.

Explanation

Correct Answer

B:

Selector and subnet-specific traffic evidence confirm corrected scope. This is the decisive acceptance evidence for the requirement to correct the branch's protected subnet prefix.

Incorrect Answers

A:

Positive and excluded subnet traffic prove selector boundaries.

C:

Selector listing and encrypted packet counters confirm the Phase 2 repair.

D:

Stage-aware evidence prevents blind changes to unrelated policy settings.

Question 557

The security team requires one IPsec mesh connection between two regional hubs but not a direct tunnel between every branch. The administrator must use a partial-mesh topology with clear routing between sites. Which action most directly satisfies the requirement?

  1. Deploy direct IPsec tunnels only for required hub pairs and route remaining branch traffic through designated hubs.
  2. Configure the required direct site-to-site tunnels and routes between all relevant regional peers.
  3. Correct the private subnet route and policies to use the live route-based IPsec interface.
  4. Configure compatible address selectors or supported broad selectors with firewall policies and routes for the approved subnets.

Explanation

Correct Answer

A:

Partial mesh reduces tunnel count while maintaining selected direct and transitive connectivity. In the stated configuration, this directly meets the requirement to use a partial-mesh topology with clear routing between sites.

Incorrect Answers

B:

A full mesh requires direct protected paths for each peer pair.

C:

A healthy unused tunnel cannot forward protected traffic if route/policy objects point elsewhere.

D:

VPN selectors and protected routes must cover each authorized remote network.

Question 558

An operations review is verifying a FortiOS 7.6 change. Original problem: The security team requires one IPsec mesh connection between two regional hubs but not a direct tunnel between every branch. The selected remediation was: Deploy direct IPsec tunnels only for required hub pairs and route remaining branch traffic through designated hubs. Which observation best proves that the requirement to use a partial-mesh topology with clear routing between sites has actually been achieved?

  1. A route and tunnel test between every region pair avoids headquarters as the transit.
  2. A new application flow matches the correct ipsec-hq rule and its tunnel encrypt counters advance.
  3. Hub-to-hub traffic uses its direct tunnel while other allowed site pairs follow their defined transit route.
  4. Both encrypt and decrypt counters increase while a bidirectional application request completes.

Explanation

Correct Answer

C:

Two path examples distinguish a partial mesh from an accidental full mesh. This is the decisive acceptance evidence for the requirement to use a partial-mesh topology with clear routing between sites.

Incorrect Answers

A:

Pairwise path checks demonstrate genuine direct mesh connectivity.

B:

Active route, policy ID and SA counters together verify use of the intended tunnel.

D:

Counter symmetry and application success verify the return path.

Question 559

A business wants each of four regional sites to communicate directly with every other region without transiting headquarters. The administrator must design a full-mesh IPsec topology for the four regions. Which action most directly satisfies the requirement?

  1. Replace the inappropriate tunnel default route with explicit routes for approved VPN destination networks.
  2. Configure the supported automatic negotiation option for the IPsec Phase 2 SA where appropriate.
  3. Configure the required direct site-to-site tunnels and routes between all relevant regional peers.
  4. Deploy direct IPsec tunnels only for required hub pairs and route remaining branch traffic through designated hubs.

Explanation

Correct Answer

C:

A full mesh requires direct protected paths for each peer pair. In the stated configuration, this directly meets the requirement to design a full-mesh IPsec topology for the four regions.

Incorrect Answers

A:

A route-based IPsec interface should be selected only for the intended protected destinations unless full-tunnel design is deliberate.

B:

Traffic-triggered SA setup can delay first packets; auto-negotiation requests establish the child SA in advance.

D:

Partial mesh reduces tunnel count while maintaining selected direct and transitive connectivity.

Question 560

An operations review is verifying a FortiOS 7.6 change. Original problem: A business wants each of four regional sites to communicate directly with every other region without transiting headquarters. The selected remediation was: Configure the required direct site-to-site tunnels and routes between all relevant regional peers. Which observation best proves that the requirement to design a full-mesh IPsec topology for the four regions has actually been achieved?

  1. Both peers report the same negotiated IKE version and an authenticated Phase 1 SA.
  2. The required IPsec SA exists before the application job starts, with an idle tunnel subsequently carrying the job.
  3. A route and tunnel test between every region pair avoids headquarters as the transit.
  4. Hub-to-hub traffic uses its direct tunnel while other allowed site pairs follow their defined transit route.

Explanation

Correct Answer

C:

Pairwise path checks demonstrate genuine direct mesh connectivity. This is the decisive acceptance evidence for the requirement to design a full-mesh IPsec topology for the four regions.

Incorrect Answers

A:

Protocol and SA confirmation isolate the mismatch.

B:

Pre-job SA state confirms proactive negotiation.

D:

Two path examples distinguish a partial mesh from an accidental full mesh.

Fortinet NSE 4 - FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) Practice Tests