McAfee-Secured Website

Exam Code: NSE4_FGT_AD-7.6

Exam Name: Fortinet NSE 4 - FortiOS 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE4

100% Fortinet NSE4_FGT_AD-7.6 Guaranteed Success With Testking Training Materials

Get Real NSE4_FGT_AD-7.6 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

94 Questions & Answers with Testing Engine

"Fortinet NSE 4 - FortiOS 7.6 Administrator Exam", also known as NSE4_FGT_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE4_FGT_AD-7.6 Exam Engine. Your NSE4_FGT_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE4_FGT_AD-7.6 Practice Test 54

Question 530

An operations review is verifying a FortiOS 7.6 change. Original problem: A FortiGate site-to-site VPN has Phase 1 and Phase 2 up, but branch traffic to 10.60.10.0/24 exits the public default route. The selected remediation was: Configure or correct a static route for 10.60.10.0/24 via the appropriate route-based tunnel. Which observation best proves that the requirement to route the remote private subnet toward the IPsec interface has actually been achieved?

  1. New-subnet test flows encrypt through the intended tunnel and return while older flows still work.
  2. The negotiated child SA lists the exact /24 and test hosts in that subnet communicate securely.
  3. Private service flows use the tunnel, while public web traffic exits its legitimate internet WAN.
  4. The route lookup selects the IPsec interface and tunnel encrypt counters increase when branch users connect.

Explanation

Correct Answer

D:

Forwarding and encryption evidence confirms correct route insertion. This is the decisive acceptance evidence for the requirement to route the remote private subnet toward the IPsec interface.

Incorrect Answers

A:

New and existing subnet checks prove safe extension.

B:

Selector and subnet-specific traffic evidence confirm corrected scope.

C:

Contrasting destinations validate route scope. This does not establish the required outcome: The route lookup selects the IPsec interface and tunnel encrypt counters increase when branch users connect.

Question 531

An HQ FortiGate accepts IPsec traffic, but traffic from the branch source never reaches HQ servers because no transit firewall policy matches the tunnel ingress. The administrator must authorize the encrypted tunnel's private traffic explicitly. Which action most directly satisfies the requirement?

  1. Check headquarters-to-branch route, security policies and private subnet selectors for the return direction.
  2. Create a narrowly scoped permit policy from the IPsec tunnel interface to the server LAN with the right addresses and services.
  3. Correct the private subnet route and policies to use the live route-based IPsec interface.
  4. Configure a tunnel-to-LAN policy with the partner source, database destination and TCP 1433 service only.

Explanation

Correct Answer

B:

An established tunnel does not override FortiGate's firewall policy matching. In the stated configuration, this directly meets the requirement to authorize the encrypted tunnel's private traffic explicitly.

Incorrect Answers

A:

Outbound encrypted counters alone cannot prove that replies return and are authorized.

C:

A healthy unused tunnel cannot forward protected traffic if route/policy objects point elsewhere.

D:

IPsec encryption does not replace least-privilege firewall policy enforcement.

Question 532

An operations review is verifying a FortiOS 7.6 change. Original problem: An HQ FortiGate accepts IPsec traffic, but traffic from the branch source never reaches HQ servers because no transit firewall policy matches the tunnel ingress. The selected remediation was: Create a narrowly scoped permit policy from the IPsec tunnel interface to the server LAN with the right addresses and services. Which observation best proves that the requirement to authorize the encrypted tunnel's private traffic explicitly has actually been achieved?

  1. A new application flow matches the correct ipsec-hq rule and its tunnel encrypt counters advance.
  2. Diagnostic output identifies the failing phase and the correct fix allows both IKE and Phase 2 SAs to establish.
  3. Debug flow identifies the tunnel-to-LAN permit policy and the server sees the branch client.
  4. Database TCP 1433 works from the partner, while a test on an unrelated port is denied.

Explanation

Correct Answer

C:

Matched rule and successful application access prove authorization. This is the decisive acceptance evidence for the requirement to authorize the encrypted tunnel's private traffic explicitly.

Incorrect Answers

A:

Active route, policy ID and SA counters together verify use of the intended tunnel.

B:

Stage-aware evidence prevents blind changes to unrelated policy settings.

D:

Port-specific contrast demonstrates authorization restriction.

Question 533

Two firewall peers use IKEv2 on one side and IKEv1-only settings on the other, and neither side forms an IKE SA. The administrator must configure a compatible IKE version. Which action most directly satisfies the requirement?

  1. Correct the private subnet route and policies to use the live route-based IPsec interface.
  2. Set both peers to a mutually supported IKE protocol version and recheck security proposals.
  3. Configure compatible IKE DPD behavior and a suitable route/tunnel failover design.
  4. Configure matching compatible local and remote selectors for the intended protected subnet pair.

Explanation

Correct Answer

B:

A Phase 1 version mismatch prevents a negotiated IKE security association. In the stated configuration, this directly meets the requirement to configure a compatible IKE version.

Incorrect Answers

A:

A healthy unused tunnel cannot forward protected traffic if route/policy objects point elsewhere.

C:

DPD detects loss of IKE peer responsiveness rather than trusting stale SA state.

D:

A healthy IKE SA cannot carry protected data when Phase 2 selectors do not match the negotiated flow.

Question 534

An operations review is verifying a FortiOS 7.6 change. Original problem: Two firewall peers use IKEv2 on one side and IKEv1-only settings on the other, and neither side forms an IKE SA. The selected remediation was: Set both peers to a mutually supported IKE protocol version and recheck security proposals. Which observation best proves that the requirement to configure a compatible IKE version has actually been achieved?

  1. Both peers report the same negotiated IKE version and an authenticated Phase 1 SA.
  2. A packet capture shows UDP 500 request/reply exchange followed by established authenticated IKE SA.
  3. On simulated peer loss, failure is detected and protected traffic moves to the available backup path.
  4. Phase 2 SA displays the expected local/remote selector pair and data packets encrypt.

Explanation

Correct Answer

A:

Protocol and SA confirmation isolate the mismatch. This is the decisive acceptance evidence for the requirement to configure a compatible IKE version.

Incorrect Answers

B:

Control-plane exchange proves the blocked service path was opened.

C:

DPD and new-route evidence verify failure handling.

D:

Selector listing and encrypted packet counters confirm the Phase 2 repair.

Question 535

A partner's IPsec tunnel comes up, but the FortiGate drops traffic because source NAT changes the branch's private address before entering the tunnel. The administrator must preserve original source addresses for the VPN selectors. Which action most directly satisfies the requirement?

  1. Design consistent NAT and Phase 2 selectors for the uniquely translated partner prefixes, with matching reciprocal definitions.
  2. Create a narrowly scoped permit policy from the IPsec tunnel interface to the server LAN with the right addresses and services.
  3. Use a policy for tunnel traffic without inappropriate SNAT and verify the selectors cover actual subnets.
  4. Configure matching pre-shared keys for the correct Phase 1 tunnel interfaces at both peers.

Explanation

Correct Answer

C:

NAT can make packet identities inconsistent with the intended private protected selectors. In the stated configuration, this directly meets the requirement to preserve original source addresses for the VPN selectors.

Incorrect Answers

A:

Overlapping networks require coherent translated identities in routes, selectors and policies.

B:

An established tunnel does not override FortiGate's firewall policy matching.

D:

IKE authentication fails when the shared secret differs even if routes and Phase 2 selectors appear correct.

Question 536

An operations review is verifying a FortiOS 7.6 change. Original problem: A partner's IPsec tunnel comes up, but the FortiGate drops traffic because source NAT changes the branch's private address before entering the tunnel. The selected remediation was: Use a policy for tunnel traffic without inappropriate SNAT and verify the selectors cover actual subnets. Which observation best proves that the requirement to preserve original source addresses for the VPN selectors has actually been achieved?

  1. Each partner's translated prefix reaches only its correct service and carries a separately identifiable encrypted SA flow.
  2. Debug flow identifies the tunnel-to-LAN permit policy and the server sees the branch client.
  3. Remote packet capture shows original branch source IPs and bidirectional private traffic succeeds.
  4. Only the approved subnet pair carries encrypted traffic and unrelated subnet tests are denied.

Explanation

Correct Answer

C:

The remote source address demonstrates NAT exemption, not merely a tunnel status light. This is the decisive acceptance evidence for the requirement to preserve original source addresses for the VPN selectors.

Incorrect Answers

A:

Partner-specific translated source/destination evidence validates overlap handling.

B:

Matched rule and successful application access prove authorization.

D:

Scope tests demonstrate safe wizard customization.

Question 537

A branch connection has a NAT device between the FortiGate and its remote IKE peer, and IKE negotiation stalls after NAT detection. The administrator must ensure NAT traversal is supported end to end. Which action most directly satisfies the requirement?

  1. Confirm the peers support NAT traversal, but leave UDP 4500 blocked by the upstream device after NAT detection.
  2. Allow the required IKE UDP 500 traffic on the intermediate path and NAT-T UDP 4500 if appropriate.
  3. Enable compatible IPsec NAT traversal and permit UDP 4500 where NAT-T is required.
  4. Configure the supported automatic negotiation option for the IPsec Phase 2 SA where appropriate.

Explanation

Correct Answer

C:

Encapsulation over UDP 4500 lets IPsec operate through address-translating middleboxes. In the stated configuration, this directly meets the requirement to ensure NAT traversal is supported end to end.

Incorrect Answers

A:

Support for NAT-T on both endpoints is necessary but cannot overcome an upstream filter denying UDP 4500. The scenario requires the supported UDP-encapsulated path to pass through the NAT device and the peers to use compatible NAT traversal.

B:

Reaching the public IP with ICMP is not evidence that IKE UDP traffic is allowed.

D:

Traffic-triggered SA setup can delay first packets; auto-negotiation requests establish the child SA in advance.

Question 538

An operations review is verifying a FortiOS 7.6 change. Original problem: A branch connection has a NAT device between the FortiGate and its remote IKE peer, and IKE negotiation stalls after NAT detection. The selected remediation was: Enable compatible IPsec NAT traversal and permit UDP 4500 where NAT-T is required. Which observation best proves that the requirement to ensure NAT traversal is supported end to end has actually been achieved?

  1. Phase 2 SA displays the expected local/remote selector pair and data packets encrypt.
  2. Packet capture shows successful UDP 4500 exchange and a negotiated IPsec SA through the NAT path.
  3. VPN encrypted data traverses UDP 4500 and both Phase 1 and Phase 2 SA counters increment.
  4. Remote packet capture shows original branch source IPs and bidirectional private traffic succeeds.

Explanation

Correct Answer

B:

NAT-T packets plus a negotiated SA prove traversal is functional. This is the decisive acceptance evidence for the requirement to ensure NAT traversal is supported end to end.

Incorrect Answers

A:

Selector listing and encrypted packet counters confirm the Phase 2 repair.

C:

Encapsulated data and SA activity prove the NAT traversal path works.

D:

The remote source address demonstrates NAT exemption, not merely a tunnel status light.

Question 539

A FortiGate tunnel's Phase 1 is established, but a Phase 2 PFS group differs between peers and data SAs fail to negotiate. The administrator must align Phase 2 PFS settings. Which action most directly satisfies the requirement?

  1. Configure matching supported PFS and associated Phase 2 cryptographic parameters on the peers.
  2. Permit NAT-T UDP 4500 on the upstream device and confirm both peers support NAT traversal.
  3. Set both peers to a mutually supported IKE protocol version and recheck security proposals.
  4. Match the peers' Phase 2 encryption/integrity proposals, selectors and PFS settings.

Explanation

Correct Answer

A:

Phase 2 must agree on PFS and other selectors/proposals to form an IPsec SA. In the stated configuration, this directly meets the requirement to align Phase 2 PFS settings.

Incorrect Answers

B:

NAT-T encapsulation requires UDP 4500 reachability after NAT detection.

C:

A Phase 1 version mismatch prevents a negotiated IKE security association.

D:

Without a matching Phase 2 SA, the firewall cannot decrypt data as ordinary routed traffic.

Question 540

An operations review is verifying a FortiOS 7.6 change. Original problem: A FortiGate tunnel's Phase 1 is established, but a Phase 2 PFS group differs between peers and data SAs fail to negotiate. The selected remediation was: Configure matching supported PFS and associated Phase 2 cryptographic parameters on the peers. Which observation best proves that the requirement to align Phase 2 PFS settings has actually been achieved?

  1. IKE packets exit the specified WAN and the peer establishes the appropriate Phase 1 SA.
  2. IKE logs show a mutually selected encryption/integrity proposal and the IKE SA establishes.
  3. An authenticated Phase 2 SA establishes with the intended PFS group and encrypted traffic begins.
  4. Logs show the same agreed DH/proposal and an IKE SA completes.

Explanation

Correct Answer

C:

Negotiated PFS and active counters verify the correction. This is the decisive acceptance evidence for the requirement to align Phase 2 PFS settings.

Incorrect Answers

A:

Capturing the underlay and SA confirms the gateway path.

B:

Negotiated transform evidence confirms more than interface reachability.

D:

Negotiated parameters verify the exact mismatch was resolved.

Fortinet NSE 4 - FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) Practice Tests