McAfee-Secured Website

Exam Bundle

Exam Code: N10-009

Exam Name CompTIA Network+

Certification Provider: CompTIA

Corresponding Certification: CompTIA Network+

CompTIA N10-009 Bundle $44.99

100% CompTIA N10-009 Guaranteed Success With Testking Training Materials

Get Real N10-009 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    N10-009 Questions & Answers

    768 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual N10-009 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • N10-009 Video Course

    N10-009 Video Course

    240 Video Lectures

    N10-009 Video Course is developed by CompTIA Professionals to help you pass the N10-009 exam.

    Description

    This course will improve your knowledge and skills required to pass CompTIA Network+ exam.
  • Study Guide

    N10-009 Study Guide

    128 PDF Pages

    Developed by industry experts, this 128-page guide spells out in painstaking detail all of the information you need to ace N10-009 exam.

CompTIA Network+ (N10-009) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    768 Questions

    $124.99
  • N10-009 Video Course

    Video Course

    240 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    128 PDF Pages

    $29.99

CompTIA N10-009 Practice Test 60

Question 590

A static default route points to an unreachable internet circuit yet stays installed because only local Ethernet carrier is checked. What should the network administrator implement first to meet this requirement?

  1. Validate FHRP virtual MAC behavior, gratuitous ARP and switch learning during failover.
  2. Configure a supported static one-to-one NAT mapping with inbound security policies.
  3. Apply outbound BGP prefix filters and validation tied to approved announcements.
  4. Use an appropriate tracked next-hop reachability test or dynamic failover control.

Explanation

Correct Answer

D:

This action addresses the specific requirement because link-up status is insufficient to prove the remote path is usable. The independent acceptance check is: When upstream reachability fails the backup route becomes active without manual commands.

Incorrect Answers

A:

This action addresses a different situation: A campus default gateway VIP fails over but client ARP caches still point to the old hardware address. It would not directly resolve the current network requirement because link-up status is insufficient to prove the remote path is usable.

B:

This action addresses a different situation: A public web server has RFC1918 addressing but must publish one fixed external IPv4 address for inbound HTTPS. It would not directly resolve the current network requirement because link-up status is insufficient to prove the remote path is usable.

C:

This action addresses a different situation: A network advertises 192.0.2.0/24 from one BGP edge despite having no authorized ownership of that prefix. It would not directly resolve the current network requirement because link-up status is insufficient to prove the remote path is usable.

Question 591

A newly installed lightweight AP cannot serve users because it has not joined its controller. Which recommendation most directly resolves the documented network issue?

  1. Distinguish SSID network identity from per-radio BSSID and document the enterprise ESS design.
  2. Isolate guest WLAN in its own routed security zone with deny-by-default access to internal subnets.
  3. Verify controller discovery, management reachability and authorized AP adoption.
  4. Deploy an infrastructure-mode AP when clients need managed distribution system access.

Explanation

Correct Answer

C:

This action addresses the specific requirement because lightweight APs commonly rely on central control for configuration and operation. The independent acceptance check is: The AP appears joined to the intended controller and advertises authorized SSIDs.

Incorrect Answers

A:

This action addresses a different situation: Users walk between multiple APs with the same SSID but support mistakes the radio BSSID for the network name. It would not directly resolve the current network requirement because lightweight APs commonly rely on central control for configuration and operation.

B:

This action addresses a different situation: A public guest SSID can reach internal printer and database networks. It would not directly resolve the current network requirement because lightweight APs commonly rely on central control for configuration and operation.

D:

This action addresses a different situation: A field crew uses client devices in ad hoc mode expecting them to act as normal managed infrastructure WLANs. It would not directly resolve the current network requirement because lightweight APs commonly rely on central control for configuration and operation.

Question 592

A switch port negotiates half duplex while the host uses full duplex and many late collisions appear. Which post-change test best demonstrates that the problem is resolved?

  1. Both peers establish carrier with correct fiber mapping.
  2. A cable certification test passes with no pair shorts or excessive return loss.
  3. Late collisions and frame errors stop rising after correction.
  4. Optical levels return inside specification with stable error counters.

Explanation

Correct Answer

C:

The intended action is: Match compatible speed/duplex configuration or restore correct autonegotiation. This works because duplex mismatch creates collisions and FCS errors during bidirectional traffic.

Incorrect Answers

A:

This choice would test a different networking condition: A network rack uses two identical fiber pairs but one has transmit fibers crossed into transmit on the peer. Its related action is: Correct TX-to-RX polarity and test both directions.

B:

This choice would test a different networking condition: A copper pair appears shorted in a cable tester after a technician crushed the cable under a raised floor. Its related action is: Replace the crushed segment and protect the replacement cable path.

D:

This choice would test a different networking condition: A transceiver indicates low optical receive power and a dusty LC end face is visible. Its related action is: Clean and inspect the fiber end face with approved tools, then measure optical power.

Question 593

An equipment room has sustained 80% relative humidity and condensation appears on patch panels. What acceptance result confirms the specified networking requirement is met?

  1. Thermal readings remain inside vendor specifications at sustained rack load.
  2. The labeled cable map identifies the exact IDF-to-MDF patch path during testing.
  3. Equipment mounts safely with service clearance and no compressed or obstructed cabling.
  4. Environmental monitoring holds approved humidity/temperature without condensation.

Explanation

Correct Answer

D:

The intended action is: Bring environmental humidity into the specified operating envelope and address condensation causes. This works because moisture accelerates corrosion and creates electrical leakage risk.

Incorrect Answers

A:

This choice would test a different networking condition: A top-of-rack switch exhausts hot air toward cold-aisle server intakes. Its related action is: Select appropriate port-side intake/exhaust direction and hot/cold aisle placement.

B:

This choice would test a different networking condition: An IDF on an upper floor connects horizontal cable runs but its uplink to MDF is unlabeled. Its related action is: Document the intermediate distribution frame and its cross-connect to the main distribution frame.

C:

This choice would test a different networking condition: A network rack is too shallow for new deep switches, and front cables block airflow. Its related action is: Confirm rack-unit height, device depth, front/rear service clearance and cable management before mounting.

Question 594

A crowded 5-GHz office increases channel width to 160 MHz and sees fewer viable nonoverlapping channels. Which verification finding would support closing this network issue?

  1. AP logs show compliant channel moves and clients recover through the supported transition process.
  2. Client throughput and retry rates improve with verified channel reuse.
  3. The former contractor loses access without rotating every employee's credentials.
  4. A short test shows lower channel utilization, but retry rates and throughput under representative client load do not improve.

Explanation

Correct Answer

B:

The intended action is: Select a narrower channel width where survey evidence favors reuse over peak PHY rate. This works because wider channels consume more contiguous spectrum and can worsen contention in dense deployments.

Incorrect Answers

A:

This choice would test a different networking condition: A DFS-sensitive 5-GHz WLAN drops briefly when radar detection forces a channel change. Its related action is: Plan for dynamic frequency selection and regulatory channel constraints, including 802.11h behavior.

C:

This choice would test a different networking condition: Employees use one shared Wi-Fi passphrase, and a departing contractor still knows it. Its related action is: Replace shared PSK with enterprise 802.1X authentication and individual revocable identities where supported.

D:

Lower utilization in isolation does not prove the 160-MHz contention problem is resolved. Client throughput, retries and effective channel reuse must improve as in the keyed acceptance observation.

Question 595

A business consumes centrally hosted email through a browser and wants minimal mailbox server maintenance. Which measured outcome provides the strongest evidence of success?

  1. Users send and receive mail while provider-side mail server lifecycle is not operated by the business.
  2. Scale-out and scale-in events occur safely against realistic load and idle spend falls.
  3. Internet hosts cannot reach private instances while authorized application paths function.
  4. A responsibility map assigns OS security updates to the customer and datacenter hardware to the provider.

Explanation

Correct Answer

A:

The intended action is: Select a SaaS mail service with identity, retention and data access governance. This works because saaS provides an end-user application rather than customer-managed software hosting infrastructure.

Incorrect Answers

B:

This choice would test a different networking condition: A cloud deployment adds more instances during seasonal load and reduces them after demand ends. Its related action is: Use elasticity and tested autoscaling policies instead of permanently sizing for peak demand.

C:

This choice would test a different networking condition: An organization wants an isolated cloud network with private application subnets and restricted ingress routes. Its related action is: Build a virtual private cloud with explicit subnets, route tables and security controls.

D:

This choice would test a different networking condition: An IT team leases virtual machines with control of OS patches but the cloud provider owns physical servers. Its related action is: Classify the service as IaaS and define guest-OS responsibilities separately from provider hardware duties.

Question 596

An application uses stale DNS after cutover because clients cache a long TTL for an old address. What should the network administrator implement first to meet this requirement?

  1. Check resolver addresses, DNS queries and zone records rather than default-route forwarding alone.
  2. Verify client route distribution, split/full tunnel rules and internal DNS settings.
  3. Plan TTL reduction ahead of the next cutover and flush/expire caches where authorized.
  4. Check authoritative AAAA publishing and recursive resolver reachability for the hostname.

Explanation

Correct Answer

C:

This action addresses the specific requirement because resolver caching can persist records for their remaining TTL. The independent acceptance check is: Representative clients converge on the new address within the documented window.

Incorrect Answers

A:

This action addresses a different situation: All clients in one subnet can reach the IP of a website but cannot resolve its FQDN. It would not directly resolve the current network requirement because resolver caching can persist records for their remaining TTL.

B:

This action addresses a different situation: A VPN tunnel is up but clients cannot use applications because permitted routes were never pushed to remote devices. It would not directly resolve the current network requirement because resolver caching can persist records for their remaining TTL.

D:

This action addresses a different situation: A Linux host has IPv6 addresses but cannot resolve IPv6-only service names because its DNS query finds no AAAA records. It would not directly resolve the current network requirement because resolver caching can persist records for their remaining TTL.

Question 597

A newly built office runs network cabling through a shared ventilation plenum without checking fire ratings. Which solution best satisfies the technical constraint without introducing unrelated changes?

  1. Evaluate qualified direct-attach copper (twinax DAC) rather than long-distance optical modules.
  2. Terminate twisted-pair Ethernet with supported RJ45 modular connectors and tested pair mapping.
  3. Use locally code-compliant plenum-rated cable or approved conduit methods for the air-handling space.
  4. Match fiber connector polish specifications and protect end faces before connection.

Explanation

Correct Answer

C:

This action addresses the specific requirement because cable jacket fire/smoke ratings depend on installation environment and local code. The independent acceptance check is: Inspection approves the installed cable class in each air-handling pathway.

Incorrect Answers

A:

This action addresses a different situation: A short data-center connection between top-of-rack switches uses compatible high-speed ports and needs low-cost short reach. It would not directly resolve the current network requirement because cable jacket fire/smoke ratings depend on installation environment and local code.

B:

This action addresses a different situation: A desk switch has RJ45 jacks but the installer presents RJ11 telephone plugs and intermittent contact. It would not directly resolve the current network requirement because cable jacket fire/smoke ratings depend on installation environment and local code.

D:

This action addresses a different situation: Two neighboring switch rooms need an optical handoff and the technician must avoid mixing APC and UPC connectors. It would not directly resolve the current network requirement because cable jacket fire/smoke ratings depend on installation environment and local code.

Question 598

A finance office encrypts stored router configuration backups but sends the same files over plaintext FTP. What is the most appropriate network configuration or troubleshooting action for this requirement?

  1. Use centrally managed individual identities and role-based authorization, retaining a controlled break-glass path.
  2. Protect configuration files in transit using authenticated encryption as well as storage encryption.
  3. Use an appropriate SAML federation flow with signed assertions and audience validation.
  4. Define 802.1X authentication separately from per-user/VLAN authorization policy.

Explanation

Correct Answer

B:

This action addresses the specific requirement because data-at-rest encryption does not protect plaintext sent over the network. The independent acceptance check is: A path capture contains no readable configuration secrets and the archive remains encrypted.

Incorrect Answers

A:

This action addresses a different situation: A core router authenticates operators with a shared local admin password and cannot attribute individual changes. It would not directly resolve the current network requirement because data-at-rest encryption does not protect plaintext sent over the network.

C:

This action addresses a different situation: A client wants single sign-on to a hosted network controller using its corporate identity provider. It would not directly resolve the current network requirement because data-at-rest encryption does not protect plaintext sent over the network.

D:

This action addresses a different situation: A company authenticates employees to Wi-Fi using a RADIUS service but does not distinguish authentication from device authorization. It would not directly resolve the current network requirement because data-at-rest encryption does not protect plaintext sent over the network.

Question 599

An IDF on an upper floor connects horizontal cable runs but its uplink to MDF is unlabeled. Which verification finding would support closing this network issue?

  1. Equipment mounts safely with service clearance and no compressed or obstructed cabling.
  2. Environmental monitoring holds approved humidity/temperature without condensation.
  3. The labeled cable map identifies the exact IDF-to-MDF patch path during testing.
  4. An electrical load assessment and controlled failover show safe operation within ratings.

Explanation

Correct Answer

C:

The intended action is: Document the intermediate distribution frame and its cross-connect to the main distribution frame. This works because mDF and IDF roles support traceable floor distribution and upstream aggregation.

Incorrect Answers

A:

This choice would test a different networking condition: A network rack is too shallow for new deep switches, and front cables block airflow. Its related action is: Confirm rack-unit height, device depth, front/rear service clearance and cable management before mounting.

B:

This choice would test a different networking condition: An equipment room has sustained 80% relative humidity and condensation appears on patch panels. Its related action is: Bring environmental humidity into the specified operating envelope and address condensation causes.

D:

This choice would test a different networking condition: A network closet uses consumer power strips despite multiple high-watt switches and UPS loads. Its related action is: Design a rated rack PDU, UPS and circuit load distribution within electrical limits.

Question 600

A critical network must resume in 20 minutes but its only alternate site is an empty building with no equipment. Which verification finding would support closing this network issue?

  1. Restored routing and authentication services meet the measured hours-long RTO.
  2. Incident reports separately calculate elapsed repair time and observed intervals between failures.
  3. A controlled primary loss promotes the standby without an unplanned routing outage.
  4. A restoration drill makes critical network services usable within the approved 20-minute target.

Explanation

Correct Answer

D:

The intended action is: Select a suitably ready hot or warm recovery site based on tested RTO and cost. This works because a cold site normally cannot meet short restore objectives without prepositioned capacity.

Incorrect Answers

A:

This choice would test a different networking condition: A medium-critical network requires spare equipment and backups but can tolerate several hours of configuration work. Its related action is: Plan a warm site with partially ready infrastructure and verified backups.

B:

This choice would test a different networking condition: A vendor reports equipment reliability using mean time between failures but the ops team expects it to measure repair speed. Its related action is: Track MTBF as a reliability interval and MTTR as restoration duration.

C:

This choice would test a different networking condition: A regulated branch uses one active and one idle backup firewall; it must make the standby take over after the active node fails. Its related action is: Configure and test an active-passive HA pair with state handling where supported.