McAfee-Secured Website

Exam Bundle

Exam Code: N10-009

Exam Name CompTIA Network+

Certification Provider: CompTIA

Corresponding Certification: CompTIA Network+

CompTIA N10-009 Bundle $44.99

100% CompTIA N10-009 Guaranteed Success With Testking Training Materials

Get Real N10-009 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    N10-009 Questions & Answers

    768 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual N10-009 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • N10-009 Video Course

    N10-009 Video Course

    240 Video Lectures

    N10-009 Video Course is developed by CompTIA Professionals to help you pass the N10-009 exam.

    Description

    This course will improve your knowledge and skills required to pass CompTIA Network+ exam.
  • Study Guide

    N10-009 Study Guide

    128 PDF Pages

    Developed by industry experts, this 128-page guide spells out in painstaking detail all of the information you need to ace N10-009 exam.

CompTIA Network+ (N10-009) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    768 Questions

    $124.99
  • N10-009 Video Course

    Video Course

    240 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    128 PDF Pages

    $29.99

CompTIA N10-009 Practice Test 59

Question 580

A maintenance engineer sets two switches to claim root bridge priority and the campus topology becomes unstable. Which post-change test best demonstrates that the problem is resolved?

  1. Root role and selected ports match the documented design after topology recalculation.
  2. The SVI reports an operational interface state when a legitimate VLAN member becomes active.
  3. Both ends report 10 Gbps full duplex with normal error counters under load.
  4. The port channel shows both member links and stays available after one is removed.

Explanation

Correct Answer

A:

The intended action is: Assign deliberate root and secondary root bridge priorities for the relevant spanning-tree instances. This works because root bridge placement influences blocked links and convergence patterns.

Incorrect Answers

B:

This choice would test a different networking condition: An SVI configured for VLAN 200 remains down even after an administrator enables the interface, and no operational switchport carries that VLAN. Its related action is: Ensure VLAN 200 has an active eligible access or trunk port before expecting the SVI line protocol to rise.

C:

This choice would test a different networking condition: A storage device negotiates 1 Gbps despite its NIC and switch supporting 10 Gbps through the correct optic. Its related action is: Check interface and transceiver capabilities, autonegotiation policy and peer configuration.

D:

This choice would test a different networking condition: Two 10-Gbps uplinks need aggregated bandwidth and redundancy between the same two switches. Its related action is: Configure a compatible LACP link aggregation group across both endpoints.

Question 581

A switch port negotiates half duplex while the host uses full duplex and many late collisions appear. What should the network administrator implement first to meet this requirement?

  1. Match compatible speed/duplex configuration or restore correct autonegotiation.
  2. Inspect and repair the event at the measured OTDR distance.
  3. Investigate EMI and route/replace susceptible media or use fiber isolation.
  4. Clean and inspect the fiber end face with approved tools, then measure optical power.

Explanation

Correct Answer

A:

This action addresses the specific requirement because duplex mismatch creates collisions and FCS errors during bidirectional traffic. The independent acceptance check is: Late collisions and frame errors stop rising after correction.

Incorrect Answers

B:

This action addresses a different situation: A fiber OTDR trace shows a large reflection at a newly installed mechanical connector. It would not directly resolve the current network requirement because duplex mismatch creates collisions and FCS errors during bidirectional traffic.

C:

This action addresses a different situation: An access port accumulates CRC/FCS errors after a nearby high-power motor is installed. It would not directly resolve the current network requirement because duplex mismatch creates collisions and FCS errors during bidirectional traffic.

D:

This action addresses a different situation: A transceiver indicates low optical receive power and a dusty LC end face is visible. It would not directly resolve the current network requirement because duplex mismatch creates collisions and FCS errors during bidirectional traffic.

Question 582

A remote application fails across several routers and an engineer needs to locate the first hop where the path changes. Which next action best addresses the stated networking problem?

  1. Use pathping or sustained traceroute-style probes with awareness of ICMP rate limiting.
  2. Use a calibrated optical power meter and known transceiver specifications.
  3. Use an authorized limited port/connectivity test and verify firewall state and service listener.
  4. Use traceroute/tracert and corroborating router path information.

Explanation

Correct Answer

D:

This action addresses the specific requirement because tTL-expiry probes can reveal an approximate hop sequence toward the destination. The independent acceptance check is: Path output identifies the suspect hop while independent tests account for filtered ICMP responses.

Incorrect Answers

A:

This action addresses a different situation: A WAN circuit shows different latency on each branch and operators need round-trip loss over many intermediate hops. It would not directly resolve the current network requirement because tTL-expiry probes can reveal an approximate hop sequence toward the destination.

B:

This action addresses a different situation: A fiber uplink reports optical alarms and the team needs receive/transmit power rather than generic ping. It would not directly resolve the current network requirement because tTL-expiry probes can reveal an approximate hop sequence toward the destination.

C:

This action addresses a different situation: A staff member suspects a listening service is reachable from an untrusted network segment. It would not directly resolve the current network requirement because tTL-expiry probes can reveal an approximate hop sequence toward the destination.

Question 583

A local switch may have the wrong MAC neighbor associated with a duplicate IPv4 address. Select the most defensible networking decision for this case.

  1. Check ARP/neighbor cache and correlate MAC learning information on the switch.
  2. Use an authorized limited port/connectivity test and verify firewall state and service listener.
  3. Capture the traffic with Wireshark or tcpdump using a scoped capture filter.
  4. Use an authorized Wi-Fi analyzer to survey channels, RSSI and utilization.

Explanation

Correct Answer

A:

This action addresses the specific requirement because neighbor tables show the IP-to-hardware mapping used for local delivery. The independent acceptance check is: The corrected IP maps consistently to the authorized interface across hosts.

Incorrect Answers

B:

This action addresses a different situation: A staff member suspects a listening service is reachable from an untrusted network segment. It would not directly resolve the current network requirement because neighbor tables show the IP-to-hardware mapping used for local delivery.

C:

This action addresses a different situation: An operator wants to inspect DHCP and TLS packets on a permitted lab interface to explain a failed handshake. It would not directly resolve the current network requirement because neighbor tables show the IP-to-hardware mapping used for local delivery.

D:

This action addresses a different situation: A Wi-Fi team needs to locate nearby co-channel APs and compare signal strength across meeting rooms. It would not directly resolve the current network requirement because neighbor tables show the IP-to-hardware mapping used for local delivery.

Question 584

Two neighboring switch rooms need an optical handoff and the technician must avoid mixing APC and UPC connectors. Select the most defensible networking decision for this case.

  1. Terminate twisted-pair Ethernet with supported RJ45 modular connectors and tested pair mapping.
  2. Match module form factor, port support, lane count and protocol on both endpoints.
  3. Match fiber connector polish specifications and protect end faces before connection.
  4. Use the compatible coaxial connector and transmission equipment instead of forcing RJ45 termination.

Explanation

Correct Answer

C:

This action addresses the specific requirement because different polish angles can cause severe reflections or connector damage. The independent acceptance check is: Optical return loss and insertion loss are in tolerance with the specified matching polish.

Incorrect Answers

A:

This action addresses a different situation: A desk switch has RJ45 jacks but the installer presents RJ11 telephone plugs and intermittent contact. It would not directly resolve the current network requirement because different polish angles can cause severe reflections or connector damage.

B:

This action addresses a different situation: An engineer installs an SFP module in an incompatible QSFP cage and expects the link to establish. It would not directly resolve the current network requirement because different polish angles can cause severe reflections or connector damage.

D:

This action addresses a different situation: A surveillance system uses an existing coaxial feed with threaded F-type connectors, not twisted-pair Ethernet. It would not directly resolve the current network requirement because different polish angles can cause severe reflections or connector damage.

Question 585

A Wi-Fi analyst forces all laptops to 2.4 GHz despite good 5-GHz conditions, worsening congestion. Select the most defensible networking decision for this case.

  1. Select an autonomous or locally capable AP deployment model with maintainable local security settings.
  2. Enforce trusted server certificate validation in supplicants and correct RADIUS/EAP provisioning.
  3. Enable suitable band steering while ensuring clients retain compatible connectivity.
  4. Use suitable omnidirectional antennas and validate signal coverage with a site survey.

Explanation

Correct Answer

C:

This action addresses the specific requirement because moving capable clients toward a less congested band can improve total airtime use. The independent acceptance check is: Capable clients increasingly choose 5 GHz without stranding legacy clients.

Incorrect Answers

A:

This action addresses a different situation: A standalone remote-office AP must operate without controller connectivity for months. It would not directly resolve the current network requirement because moving capable clients toward a less congested band can improve total airtime use.

B:

This action addresses a different situation: A WPA2-Enterprise SSID uses a RADIUS certificate that clients do not validate. It would not directly resolve the current network requirement because moving capable clients toward a less congested band can improve total airtime use.

D:

This action addresses a different situation: A shopping mall wants broad coverage from APs mounted in corridors rather than a focused building-to-building link. It would not directly resolve the current network requirement because moving capable clients toward a less congested band can improve total airtime use.

Question 586

A new monitoring tool discovers devices but lacks serial numbers, licensing status and owners. Which verification finding would support closing this network issue?

  1. A replacement device restores its approved baseline even when the original device is unavailable.
  2. An independent technician traces the affected patch using the documentation without trial-and-error unplugging.
  3. Inventory lists support status, compensating controls, owner and approved replacement dates.
  4. Every discovered production node maps to a supported asset record with a named owner.

Explanation

Correct Answer

D:

The intended action is: Reconcile hardware/software asset inventory with warranty, license and accountable support owners. This works because device identity and lifecycle metadata are required for reliable operations decisions.

Incorrect Answers

A:

This choice would test a different networking condition: A team stores golden configurations only on the live devices they are intended to rebuild. Its related action is: Maintain versioned, protected off-device golden baselines and compare production against them.

B:

This choice would test a different networking condition: A field technician patches a fiber port but the logical topology shows no rack location or cable ID for the link. Its related action is: Maintain physical rack/cable maps alongside logical Layer 2 and Layer 3 diagrams.

C:

This choice would test a different networking condition: A retired VPN appliance remains online with obsolete software because procurement says warranty expiration means immediate disposal. Its related action is: Distinguish product end-of-life, vendor end-of-support and a documented decommission plan.

Question 587

Cloud instances without public IPv4 addresses need outbound patch downloads but must not accept unsolicited internet sessions. After the change, which result is most relevant to the original failure?

  1. The app deploys on the managed runtime without customer-managed host patch workflows.
  2. Updates succeed and unsolicited inbound connections have no route to private instances.
  3. A responsibility map assigns OS security updates to the customer and datacenter hardware to the provider.
  4. Users send and receive mail while provider-side mail server lifecycle is not operated by the business.

Explanation

Correct Answer

B:

The intended action is: Use a suitable NAT gateway and routing for outbound-only IPv4 connections. This works because nAT-based egress allows private IPv4 workloads to initiate internet connections without public ingress addresses.

Incorrect Answers

A:

This choice would test a different networking condition: A small developer team wants hosted application runtime without administering operating systems or server images. Its related action is: Select an appropriate PaaS offering for its supported application and deployment needs.

C:

This choice would test a different networking condition: An IT team leases virtual machines with control of OS patches but the cloud provider owns physical servers. Its related action is: Classify the service as IaaS and define guest-OS responsibilities separately from provider hardware duties.

D:

This choice would test a different networking condition: A business consumes centrally hosted email through a browser and wants minimal mailbox server maintenance. Its related action is: Select a SaaS mail service with identity, retention and data access governance.

Question 588

An operator wants to inspect DHCP and TLS packets on a permitted lab interface to explain a failed handshake. After the change, which result is most relevant to the original failure?

  1. The capture shows the relevant offer or handshake sequence without collecting unrelated user data.
  2. Path output identifies the suspect hop while independent tests account for filtered ICMP responses.
  3. Repeated measurements correlate degraded performance to a consistent segment rather than an isolated ICMP filter.
  4. The identified jack-to-panel mapping agrees with final continuity testing.

Explanation

Correct Answer

A:

The intended action is: Capture the traffic with Wireshark or tcpdump using a scoped capture filter. This works because protocol analyzers expose real packet exchanges and negotiation failures.

Incorrect Answers

B:

This choice would test a different networking condition: A remote application fails across several routers and an engineer needs to locate the first hop where the path changes. Its related action is: Use traceroute/tracert and corroborating router path information.

C:

This choice would test a different networking condition: A WAN circuit shows different latency on each branch and operators need round-trip loss over many intermediate hops. Its related action is: Use pathping or sustained traceroute-style probes with awareness of ICMP rate limiting.

D:

This choice would test a different networking condition: A technician suspects an unused cable jack connects to the wrong patch panel port but labels are missing. Its related action is: Use a toner and probe or appropriate cable-tracing tool to locate the far end.

Question 589

A video group tries to assign 239.1.1.5 as a normal workstation unicast IP. Which solution best satisfies the technical constraint without introducing unrelated changes?

  1. Reserve Class D 224/4 for multicast group addressing rather than unicast host assignment.
  2. Diagnose DHCP failure rather than route the APIPA address across the organization.
  3. Assign a /26 for 60 usable-host need and a suitable small point-to-point prefix for two endpoints.
  4. Recognize 172.16.0.0/12 as RFC1918 private range and use appropriate private routing or NAT.

Explanation

Correct Answer

A:

This action addresses the specific requirement because multicast destinations are not regular interface unicast addresses. The independent acceptance check is: Group listeners join 239.1.1.5 while end hosts retain valid unicast addresses.

Incorrect Answers

B:

This action addresses a different situation: A small site assigns 169.254.42.6/16 after its DHCP server becomes unreachable. It would not directly resolve the current network requirement because multicast destinations are not regular interface unicast addresses.

C:

This action addresses a different situation: A VLSM plan gives a 60-host site a /27 and a two-host link a /25, wasting addresses and blocking growth. It would not directly resolve the current network requirement because multicast destinations are not regular interface unicast addresses.

D:

This action addresses a different situation: A technician tries to route 172.16.1.10 via a public gateway despite the interface being in 172.16.0.0/12. It would not directly resolve the current network requirement because multicast destinations are not regular interface unicast addresses.

Question 590

A static default route points to an unreachable internet circuit yet stays installed because only local Ethernet carrier is checked. What should the network administrator implement first to meet this requirement?

  1. Validate FHRP virtual MAC behavior, gratuitous ARP and switch learning during failover.
  2. Configure a supported static one-to-one NAT mapping with inbound security policies.
  3. Apply outbound BGP prefix filters and validation tied to approved announcements.
  4. Use an appropriate tracked next-hop reachability test or dynamic failover control.

Explanation

Correct Answer

D:

This action addresses the specific requirement because link-up status is insufficient to prove the remote path is usable. The independent acceptance check is: When upstream reachability fails the backup route becomes active without manual commands.

Incorrect Answers

A:

This action addresses a different situation: A campus default gateway VIP fails over but client ARP caches still point to the old hardware address. It would not directly resolve the current network requirement because link-up status is insufficient to prove the remote path is usable.

B:

This action addresses a different situation: A public web server has RFC1918 addressing but must publish one fixed external IPv4 address for inbound HTTPS. It would not directly resolve the current network requirement because link-up status is insufficient to prove the remote path is usable.

C:

This action addresses a different situation: A network advertises 192.0.2.0/24 from one BGP edge despite having no authorized ownership of that prefix. It would not directly resolve the current network requirement because link-up status is insufficient to prove the remote path is usable.