McAfee-Secured Website

Exam Bundle

Exam Code: N10-009

Exam Name CompTIA Network+

Certification Provider: CompTIA

Corresponding Certification: CompTIA Network+

CompTIA N10-009 Bundle $44.99

100% CompTIA N10-009 Guaranteed Success With Testking Training Materials

Get Real N10-009 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    N10-009 Questions & Answers

    768 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual N10-009 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • N10-009 Video Course

    N10-009 Video Course

    240 Video Lectures

    N10-009 Video Course is developed by CompTIA Professionals to help you pass the N10-009 exam.

    Description

    This course will improve your knowledge and skills required to pass CompTIA Network+ exam.
  • Study Guide

    N10-009 Study Guide

    128 PDF Pages

    Developed by industry experts, this 128-page guide spells out in painstaking detail all of the information you need to ace N10-009 exam.

CompTIA Network+ (N10-009) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    768 Questions

    $124.99
  • N10-009 Video Course

    Video Course

    240 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    128 PDF Pages

    $29.99

CompTIA N10-009 Practice Test 42

Question 410

A network team implements ACL changes without testing response paths and unintentionally blocks established application replies. What observation most directly validates the chosen network solution?

  1. An unauthorized kiosk is denied or quarantined while a managed device receives its permitted access.
  2. An unapproved VLAN cannot query devices while approved authenticated polling succeeds.
  3. Test access from office laptops cannot reach controllers except approved service paths.
  4. Authorized application exchanges work bidirectionally while explicitly prohibited new sessions fail.

Explanation

Correct Answer

D:

The intended action is: Evaluate stateful traffic behavior and symmetric policy requirements before rollout. This works because one-way port checks are insufficient when applications require return traffic.

Incorrect Answers

A:

This choice would test a different networking condition: A switch port serving an untrusted kiosk can plug into a sensitive VLAN when an employee swaps the cable. Its related action is: Enforce 802.1X network access control and restrict ports by authenticated identity and posture.

B:

This choice would test a different networking condition: Network technicians use SNMPv2c 'public' and permit remote configuration from any VLAN. Its related action is: Restrict management sources and replace weak community access with SNMPv3 where supported.

C:

This choice would test a different networking condition: A manufacturing site puts cameras, industrial controllers, and office laptops on one Layer 2 broadcast domain. Its related action is: Segment IoT/OT and general IT systems into enforced trust zones with monitored permitted flows.

Question 411

A branch continuity plan says both RTO and RPO are 'four hours' but managers think they mean the same thing. Select the most defensible networking decision for this case.

  1. Configure and test an active-passive HA pair with state handling where supported.
  2. Choose an appropriately documented cold-site strategy and account for equipment procurement time.
  3. Run a tabletop exercise for decision paths and a separate isolated validation test for technical feasibility.
  4. Define RTO as allowed restoration time and RPO as acceptable data-age loss separately.

Explanation

Correct Answer

D:

This action addresses the specific requirement because a backup can meet one objective while violating the other. The independent acceptance check is: Recovery exercises record measured service downtime and restored data age against distinct limits.

Incorrect Answers

A:

This action addresses a different situation: A regulated branch uses one active and one idle backup firewall; it must make the standby take over after the active node fails. It would not directly resolve the current network requirement because a backup can meet one objective while violating the other.

B:

This action addresses a different situation: A business can tolerate days of outage and wants the cheapest alternate workspace with power and floor space only. It would not directly resolve the current network requirement because a backup can meet one objective while violating the other.

C:

This action addresses a different situation: Managers want a DR rehearsal without touching live BGP sessions or critical applications. It would not directly resolve the current network requirement because a backup can meet one objective while violating the other.

Question 412

A field installer must determine whether a copper cable is open, shorted or miswired. What acceptance result confirms the specified networking requirement is met?

  1. Gateway replies and local link state align with the expected network path.
  2. Measured dBm values fall within the vendor's acceptable receiver range.
  3. Repeated measurements correlate degraded performance to a consistent segment rather than an isolated ICMP filter.
  4. The test identifies the exact faulty pair and a replacement passes verification.

Explanation

Correct Answer

D:

The intended action is: Use a cable wiremap/continuity tester or qualifying cable certifier. This works because basic cable testers isolate conductor-level faults before IP-level troubleshooting.

Incorrect Answers

A:

This choice would test a different networking condition: A technician needs to confirm whether a local host can reach its default gateway at all. Its related action is: Use ping with the gateway IP and inspect interface/address status.

B:

This choice would test a different networking condition: A fiber uplink reports optical alarms and the team needs receive/transmit power rather than generic ping. Its related action is: Use a calibrated optical power meter and known transceiver specifications.

C:

This choice would test a different networking condition: A WAN circuit shows different latency on each branch and operators need round-trip loss over many intermediate hops. Its related action is: Use pathping or sustained traceroute-style probes with awareness of ICMP rate limiting.

Question 413

A regulated branch uses one active and one idle backup firewall; it must make the standby take over after the active node fails. Which next action best addresses the stated networking problem?

  1. Design active-active service with health-aware routing and independent capacity.
  2. Choose an appropriately documented cold-site strategy and account for equipment procurement time.
  3. Configure and test an active-passive HA pair with state handling where supported.
  4. Track MTBF as a reliability interval and MTTR as restoration duration.

Explanation

Correct Answer

C:

This action addresses the specific requirement because active-passive designs rely on standby promotion rather than both nodes concurrently serving. The independent acceptance check is: A controlled primary loss promotes the standby without an unplanned routing outage.

Incorrect Answers

A:

This action addresses a different situation: An enterprise runs two active DNS sites and wants to withstand failure of either without manual activation. It would not directly resolve the current network requirement because active-passive designs rely on standby promotion rather than both nodes concurrently serving.

B:

This action addresses a different situation: A business can tolerate days of outage and wants the cheapest alternate workspace with power and floor space only. It would not directly resolve the current network requirement because active-passive designs rely on standby promotion rather than both nodes concurrently serving.

D:

This action addresses a different situation: A vendor reports equipment reliability using mean time between failures but the ops team expects it to measure repair speed. It would not directly resolve the current network requirement because active-passive designs rely on standby promotion rather than both nodes concurrently serving.

Question 414

An access port accumulates CRC/FCS errors after a nearby high-power motor is installed. Which recommendation most directly resolves the documented network issue?

  1. Validate receive-power limits and use an approved attenuator or correct optic to avoid overload.
  2. Repair or replace the defective connector and verify return-loss specifications.
  3. Investigate EMI and route/replace susceptible media or use fiber isolation.
  4. Correct the mechanical pinch and replace damaged cable while preserving bend radius.

Explanation

Correct Answer

C:

This action addresses the specific requirement because electromagnetic interference can corrupt copper signals without a protocol configuration defect. The independent acceptance check is: Error rates normalize after rerouting the cable away from the interference source.

Incorrect Answers

A:

This action addresses a different situation: A single-mode circuit receives far more optical power than its short-reach receiver allows after amplifier work. It would not directly resolve the current network requirement because electromagnetic interference can corrupt copper signals without a protocol configuration defect.

B:

This action addresses a different situation: A fiber patch has acceptable insertion loss but high optical return loss due to a damaged polished end. It would not directly resolve the current network requirement because electromagnetic interference can corrupt copper signals without a protocol configuration defect.

D:

This action addresses a different situation: A building cable passes continuity but gives intermittent link loss whenever a door closes on the cable. It would not directly resolve the current network requirement because electromagnetic interference can corrupt copper signals without a protocol configuration defect.

Question 415

A branch uses spreadsheet IP assignments and accidentally duplicates addresses across two teams. Which recommendation most directly resolves the documented network issue?

  1. Update logical route maps and physical diagrams under the same change record.
  2. Maintain versioned, protected off-device golden baselines and compare production against them.
  3. Implement IP address management with authoritative allocations, reservations and change control.
  4. Record an emergency change with risk justification, monitoring and retrospective approval.

Explanation

Correct Answer

C:

This action addresses the specific requirement because an IPAM system prevents untracked overlapping network and host assignments. The independent acceptance check is: New address requests are allocated uniquely and conflict checks find the previously duplicated IP.

Incorrect Answers

A:

This action addresses a different situation: An upgrade changes the routing design but engineers keep only a screenshot of the old physical switch layout. It would not directly resolve the current network requirement because an IPAM system prevents untracked overlapping network and host assignments.

B:

This action addresses a different situation: A team stores golden configurations only on the live devices they are intended to rebuild. It would not directly resolve the current network requirement because an IPAM system prevents untracked overlapping network and host assignments.

D:

This action addresses a different situation: An emergency routing fix is technically successful but has no documented approval or follow-up review. It would not directly resolve the current network requirement because an IPAM system prevents untracked overlapping network and host assignments.

Question 416

Two 10-Gbps uplinks need aggregated bandwidth and redundancy between the same two switches. Which recommendation most directly resolves the documented network issue?

  1. Configure a compatible LACP link aggregation group across both endpoints.
  2. Prune the allowed VLAN list to documented required VLANs and verify legitimate services.
  3. Configure a supported voice VLAN and data access VLAN with LLDP-MED or equivalent phone discovery.
  4. Check interface and transceiver capabilities, autonegotiation policy and peer configuration.

Explanation

Correct Answer

A:

This action addresses the specific requirement because lACP bundles compatible links logically while detecting member failures. The independent acceptance check is: The port channel shows both member links and stays available after one is removed.

Incorrect Answers

B:

This action addresses a different situation: A switch's trunk permits every VLAN including old decommissioned segments. It would not directly resolve the current network requirement because lACP bundles compatible links logically while detecting member failures.

C:

This action addresses a different situation: An IP phone and desktop share one switch access port but voice must receive separate VLAN policy. It would not directly resolve the current network requirement because lACP bundles compatible links logically while detecting member failures.

D:

This action addresses a different situation: A storage device negotiates 1 Gbps despite its NIC and switch supporting 10 Gbps through the correct optic. It would not directly resolve the current network requirement because lACP bundles compatible links logically while detecting member failures.

Question 417

A fiber link reports loss of signal and no interface carrier while the switch has a valid VLAN configuration. After the change, which result is most relevant to the original failure?

  1. Optical levels and interface link indicators recover after the physical fault is corrected.
  2. A TCP connection succeeds on 8443 after the rule or listener is corrected, with ICMP behavior unchanged.
  3. A frame trace confirms correct local MAC forwarding while SYN/SYN-ACK diagnostics identify the separate transport failure.
  4. The correct hostname resolves and presents the intended virtual host while the underlying path remains reachable.

Explanation

Correct Answer

A:

The intended action is: Diagnose transceiver power and physical media before changing VLANs or IP addresses. This works because lack of physical carrier is a Layer 1 defect that upper-layer reconfiguration cannot repair.

Incorrect Answers

B:

This choice would test a different networking condition: Two servers can exchange ICMP echo but application requests to TCP port 8443 time out at the remote listener. Its related action is: Inspect Layer 4 filtering and listener state for TCP 8443 independently of Layer 3 reachability.

C:

This choice would test a different networking condition: A workstation captures Ethernet frames with correct MAC destinations but an application cannot establish a TCP session; the team is confusing frame forwarding with transport sessions. Its related action is: Separate Layer 2 MAC delivery from Layer 4 TCP connection establishment when isolating the failed step.

D:

This choice would test a different networking condition: A user can connect to an HTTPS server by IP address but the application cannot find the expected hostname. Its related action is: Examine application-layer name resolution and virtual-host selection rather than replace network adapters.

Question 418

A resolver returns stale DNS records and the engineer wants the authoritative answer, not the browser's cached entry. What should the network administrator implement first to meet this requirement?

  1. Use ping with the gateway IP and inspect interface/address status.
  2. Capture the traffic with Wireshark or tcpdump using a scoped capture filter.
  3. Use traceroute/tracert and corroborating router path information.
  4. Use dig or nslookup against a chosen authoritative DNS server and compare recursive results.

Explanation

Correct Answer

D:

This action addresses the specific requirement because direct DNS queries help separate zone contents from caching behavior. The independent acceptance check is: The authoritative response matches the configured record while cache TTL explains the difference.

Incorrect Answers

A:

This action addresses a different situation: A technician needs to confirm whether a local host can reach its default gateway at all. It would not directly resolve the current network requirement because direct DNS queries help separate zone contents from caching behavior.

B:

This action addresses a different situation: An operator wants to inspect DHCP and TLS packets on a permitted lab interface to explain a failed handshake. It would not directly resolve the current network requirement because direct DNS queries help separate zone contents from caching behavior.

C:

This action addresses a different situation: A remote application fails across several routers and an engineer needs to locate the first hop where the path changes. It would not directly resolve the current network requirement because direct DNS queries help separate zone contents from caching behavior.

Question 419

A new VLAN exists on one switch but is missing on an adjacent switch, producing intermittent inter-floor reachability. Which next action best addresses the stated networking problem?

  1. Create/permit the VLAN on the required switches and verify trunk allowed-VLAN lists.
  2. Find the duplicate/looping connection and correct the physical or virtual switching path.
  3. Configure an 802.1Q trunk on the uplink and an access VLAN on the desk port.
  4. Configure a compatible LACP link aggregation group across both endpoints.

Explanation

Correct Answer

A:

This action addresses the specific requirement because vLAN propagation and trunk permissions determine Layer 2 reachability across switches. The independent acceptance check is: The VLAN appears consistently in switch tables and same-VLAN hosts communicate across the trunk.

Incorrect Answers

B:

This action addresses a different situation: A data center switch reports MAC address flapping between two access ports for the same host address. It would not directly resolve the current network requirement because vLAN propagation and trunk permissions determine Layer 2 reachability across switches.

C:

This action addresses a different situation: An access switch uplink must carry both VLAN 100 and VLAN 200 while a desk port belongs only to VLAN 100. It would not directly resolve the current network requirement because vLAN propagation and trunk permissions determine Layer 2 reachability across switches.

D:

This action addresses a different situation: Two 10-Gbps uplinks need aggregated bandwidth and redundancy between the same two switches. It would not directly resolve the current network requirement because vLAN propagation and trunk permissions determine Layer 2 reachability across switches.

Question 420

A service catalog lacks an API for polling link metrics and engineers propose screen-scraping the dashboard. Which measured outcome provides the strongest evidence of success?

  1. The weekly backup no longer triggers a false incident while an unexpected sustained saturation still alerts.
  2. The high-volume talker is identifiable by flow endpoints and byte counts during a test.
  3. Scheduled metrics ingestion returns expected timestamps and handles throttling without duplicate events.
  4. A simulated port flap appears once with coherent timestamps and device context in the collector.

Explanation

Correct Answer

C:

The intended action is: Prefer supported monitoring API integration with scoped tokens and documented rate limits. This works because aPIs support reliable structured exchange more than brittle UI scraping.

Incorrect Answers

A:

This choice would test a different networking condition: A WAN monitor flags bandwidth bursts as emergencies though historic backup windows routinely peak at the same time. Its related action is: Establish time-aware baseline metrics and alerts for deviations from normal workload patterns.

B:

This choice would test a different networking condition: A traffic analysis dashboard reports byte totals but cannot determine which conversation drives congestion. Its related action is: Collect suitable flow telemetry such as NetFlow/IPFIX with source, destination and interface attributes.

D:

This choice would test a different networking condition: An operations center has device logs scattered across 80 switches with unsynchronized clocks. Its related action is: Centralize syslog with reliable time synchronization and consistent source identifiers.