McAfee-Secured Website

Exam Bundle

Exam Code: N10-009

Exam Name CompTIA Network+

Certification Provider: CompTIA

Corresponding Certification: CompTIA Network+

CompTIA N10-009 Bundle $44.99

100% CompTIA N10-009 Guaranteed Success With Testking Training Materials

Get Real N10-009 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    N10-009 Questions & Answers

    768 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual N10-009 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • N10-009 Video Course

    N10-009 Video Course

    240 Video Lectures

    N10-009 Video Course is developed by CompTIA Professionals to help you pass the N10-009 exam.

    Description

    This course will improve your knowledge and skills required to pass CompTIA Network+ exam.
  • Study Guide

    N10-009 Study Guide

    128 PDF Pages

    Developed by industry experts, this 128-page guide spells out in painstaking detail all of the information you need to ace N10-009 exam.

CompTIA Network+ (N10-009) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    768 Questions

    $124.99
  • N10-009 Video Course

    Video Course

    240 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    128 PDF Pages

    $29.99

CompTIA N10-009 Practice Test 35

Question 340

A campus wants to apply central outbound browsing restrictions and inspect access to external websites. What observation most directly validates the chosen network solution?

  1. Remote clients show lower asset latency and the origin receives fewer repeat requests.
  2. The redundant link is safely blocked or controlled and broadcast rates remain stable after reconnection.
  3. Allowed URLs load and prohibited destinations generate attributable policy denials.
  4. The IDS records the simulated pattern while mirrored traffic does not change endpoint forwarding.

Explanation

Correct Answer

C:

The intended action is: Configure an authenticated web proxy with controlled egress policy and logging. This works because a proxy mediates supported application requests rather than acting as a generic Layer 2 bridge.

Incorrect Answers

A:

This choice would test a different networking condition: A content site serves the same public images globally but users far from the origin suffer high latency. Its related action is: Use a CDN to cache eligible static assets at edge locations with appropriate invalidation.

B:

This choice would test a different networking condition: An office switch learns MAC addresses but loops arise after two redundant links are connected. Its related action is: Use managed switching with loop prevention such as spanning tree and validated uplink design.

D:

This choice would test a different networking condition: A SOC needs a copy of suspicious east-west packets for investigation without risking an inline outage. Its related action is: Use passive IDS monitoring with a properly scoped mirror or network tap.

Question 341

A WAN carries periodic backup transfers that coincide with voice jitter and dropped calls. Which post-change test best demonstrates that the problem is resolved?

  1. Voice jitter and packet loss stay within target while backups continue at controlled rates.
  2. Long-haul transfer throughput improves when negotiated window scaling is preserved.
  3. Drop rates fall while legitimate peak traffic meets throughput goals.
  4. Correctly sized probes and application sessions pass without fragmentation-needed failures.

Explanation

Correct Answer

A:

The intended action is: Apply measured QoS classification, queuing and scheduling to protect latency-sensitive traffic. This works because link saturation can starve realtime traffic without proper prioritization.

Incorrect Answers

B:

This choice would test a different networking condition: A user experiences slow downloads because a firewall blocks TCP window scaling options on long-delay links. Its related action is: Validate path TCP option handling and allow supported window scaling without compromising policy.

C:

This choice would test a different networking condition: An ISP reports 1% packet loss only at peak traffic, and firewall drop queues spike at the same time. Its related action is: Determine whether queue congestion or capacity is the cause and adjust shaping or upgrade capacity.

D:

This choice would test a different networking condition: A firewall logs many small packets dropped after a tunnel was added, especially with the DF bit set. Its related action is: Check tunnel overhead and end-to-end path MTU, then adjust MSS or MTU appropriately.

Question 342

A technician suspects an unused cable jack connects to the wrong patch panel port but labels are missing. Which post-change test best demonstrates that the problem is resolved?

  1. The identified jack-to-panel mapping agrees with final continuity testing.
  2. The updated heat map identifies interfering channels and verifies improved signal quality.
  3. The prohibited port is unreachable from the test segment while authorized sessions succeed.
  4. The capture shows the relevant offer or handshake sequence without collecting unrelated user data.

Explanation

Correct Answer

A:

The intended action is: Use a toner and probe or appropriate cable-tracing tool to locate the far end. This works because tone tracing can identify cable paths without assuming their printed labels are correct.

Incorrect Answers

B:

This choice would test a different networking condition: A Wi-Fi team needs to locate nearby co-channel APs and compare signal strength across meeting rooms. Its related action is: Use an authorized Wi-Fi analyzer to survey channels, RSSI and utilization.

C:

This choice would test a different networking condition: A staff member suspects a listening service is reachable from an untrusted network segment. Its related action is: Use an authorized limited port/connectivity test and verify firewall state and service listener.

D:

This choice would test a different networking condition: An operator wants to inspect DHCP and TLS packets on a permitted lab interface to explain a failed handshake. Its related action is: Capture the traffic with Wireshark or tcpdump using a scoped capture filter.

Question 343

A fiber connection has correct link speed but throughput collapses as CRC errors rise under heavy traffic. Which measured outcome provides the strongest evidence of success?

  1. CRC/FCS counts stop rising and sustained end-to-end throughput returns after repair.
  2. Control-plane CPU recovers and legitimate routing adjacencies remain stable during controlled test load.
  3. Both directions follow accepted firewall state and sessions remain stable under load.
  4. Flood rates normalize and MAC locations stop flapping.

Explanation

Correct Answer

A:

The intended action is: Diagnose the physical error source before changing application server CPU capacity. This works because corrupt frames require retransmissions and reduce useful throughput despite nominal PHY speed.

Incorrect Answers

B:

This choice would test a different networking condition: A router's CPU spikes only when control-plane traffic is flooded, while data links show modest bandwidth. Its related action is: Inspect control-plane punt rates and implement appropriate rate limits and routing protocol protection.

C:

This choice would test a different networking condition: A website has low throughput only during asymmetric traffic across a stateful firewall pair. Its related action is: Correct return-path symmetry and state synchronization where required.

D:

This choice would test a different networking condition: A network has sudden unknown-unicast flooding after a loop caused constant MAC address movement. Its related action is: Repair the Layer 2 loop and confirm stable MAC-learning tables and spanning-tree state.

Question 344

A desk switch has RJ45 jacks but the installer presents RJ11 telephone plugs and intermittent contact. Which verification finding would support closing this network issue?

  1. A wiremap tester reports correct pairs and the Ethernet link negotiates expected speed.
  2. Optical return loss and insertion loss are in tolerance with the specified matching polish.
  3. Inspection approves the installed cable class in each air-handling pathway.
  4. The patched pair aligns and optical measurements meet approved loss budgets.

Explanation

Correct Answer

A:

The intended action is: Terminate twisted-pair Ethernet with supported RJ45 modular connectors and tested pair mapping. This works because rJ11 telephone pinouts are not interchangeable with four-pair Ethernet terminations.

Incorrect Answers

B:

This choice would test a different networking condition: Two neighboring switch rooms need an optical handoff and the technician must avoid mixing APC and UPC connectors. Its related action is: Match fiber connector polish specifications and protect end faces before connection.

C:

This choice would test a different networking condition: A newly built office runs network cabling through a shared ventilation plenum without checking fire ratings. Its related action is: Use locally code-compliant plenum-rated cable or approved conduit methods for the air-handling space.

D:

This choice would test a different networking condition: A fiber patch shelf has duplex LC ports but the replacement patch cable uses incompatible connector geometry. Its related action is: Choose matched LC duplex patch leads with the correct polish and fiber type.

Question 345

An enterprise runs two active DNS sites and wants to withstand failure of either without manual activation. What acceptance result confirms the specified networking requirement is met?

  1. One site fails and the surviving site handles the full required service load.
  2. Restored routing and authentication services meet the measured hours-long RTO.
  3. Incident reports separately calculate elapsed repair time and observed intervals between failures.
  4. A recovery exercise reaches the documented multi-day objective without unplanned dependencies.

Explanation

Correct Answer

A:

The intended action is: Design active-active service with health-aware routing and independent capacity. This works because active-active keeps multiple sites serving production traffic concurrently.

Incorrect Answers

B:

This choice would test a different networking condition: A medium-critical network requires spare equipment and backups but can tolerate several hours of configuration work. Its related action is: Plan a warm site with partially ready infrastructure and verified backups.

C:

This choice would test a different networking condition: A vendor reports equipment reliability using mean time between failures but the ops team expects it to measure repair speed. Its related action is: Track MTBF as a reliability interval and MTTR as restoration duration.

D:

This choice would test a different networking condition: A business can tolerate days of outage and wants the cheapest alternate workspace with power and floor space only. Its related action is: Choose an appropriately documented cold-site strategy and account for equipment procurement time.

Question 346

Two neighboring switch rooms need an optical handoff and the technician must avoid mixing APC and UPC connectors. What acceptance result confirms the specified networking requirement is met?

  1. The patched pair aligns and optical measurements meet approved loss budgets.
  2. Optical return loss and insertion loss are in tolerance with the specified matching polish.
  3. Both interfaces negotiate the supported rate and remain error-free under load.
  4. Supported modules are recognized and negotiate the intended Ethernet speed at both ends.

Explanation

Correct Answer

B:

The intended action is: Match fiber connector polish specifications and protect end faces before connection. This works because different polish angles can cause severe reflections or connector damage.

Incorrect Answers

A:

This choice would test a different networking condition: A fiber patch shelf has duplex LC ports but the replacement patch cable uses incompatible connector geometry. Its related action is: Choose matched LC duplex patch leads with the correct polish and fiber type.

C:

This choice would test a different networking condition: A short data-center connection between top-of-rack switches uses compatible high-speed ports and needs low-cost short reach. Its related action is: Evaluate qualified direct-attach copper (twinax DAC) rather than long-distance optical modules.

D:

This choice would test a different networking condition: An engineer installs an SFP module in an incompatible QSFP cage and expects the link to establish. Its related action is: Match module form factor, port support, lane count and protocol on both endpoints.

Question 347

A user can connect to an HTTPS server by IP address but the application cannot find the expected hostname. Select the most defensible networking decision for this case.

  1. Examine application-layer name resolution and virtual-host selection rather than replace network adapters.
  2. Investigate session persistence and application reconnection logic rather than only layer-three route metrics.
  3. Investigate representation and character-set negotiation above the network and transport layers.
  4. Diagnose transceiver power and physical media before changing VLANs or IP addresses.

Explanation

Correct Answer

A:

This action addresses the specific requirement because an IP path can be healthy when application naming and host selection fail. The independent acceptance check is: The correct hostname resolves and presents the intended virtual host while the underlying path remains reachable.

Incorrect Answers

B:

This action addresses a different situation: A multi-site monitoring dashboard reports intermittent application session resets during failover even though routing converges quickly. It would not directly resolve the current network requirement because an IP path can be healthy when application naming and host selection fail.

C:

This action addresses a different situation: A developer blames DNS for unreadable character encoding even though the name resolves and HTTP responses arrive. It would not directly resolve the current network requirement because an IP path can be healthy when application naming and host selection fail.

D:

This action addresses a different situation: A fiber link reports loss of signal and no interface carrier while the switch has a valid VLAN configuration. It would not directly resolve the current network requirement because an IP path can be healthy when application naming and host selection fail.

Question 348

A single-mode circuit receives far more optical power than its short-reach receiver allows after amplifier work. Which measured outcome provides the strongest evidence of success?

  1. Link flaps stop with the faulty connector replaced and routing stays unchanged.
  2. Receive power falls within the supported range and error rate stabilizes.
  3. NEXT measurements and throughput pass the required category test.
  4. Optical levels return inside specification with stable error counters.

Explanation

Correct Answer

B:

The intended action is: Validate receive-power limits and use an approved attenuator or correct optic to avoid overload. This works because optical receivers have both minimum and maximum input-power limits.

Incorrect Answers

A:

This choice would test a different networking condition: An employee reports intermittent ethernet while a switch shows frequent link-up/link-down events on that one port. Its related action is: Inspect patch cord, jack and NIC connector before changing routing policies.

C:

This choice would test a different networking condition: A cable label says Cat6 but the run's near-end crosstalk fails at high frequency. Its related action is: Diagnose pair twist integrity and termination quality, then recertify or replace the link.

D:

This choice would test a different networking condition: A transceiver indicates low optical receive power and a dusty LC end face is visible. Its related action is: Clean and inspect the fiber end face with approved tools, then measure optical power.

Question 349

A shopping mall wants broad coverage from APs mounted in corridors rather than a focused building-to-building link. Select the most defensible networking decision for this case.

  1. Enable suitable band steering while ensuring clients retain compatible connectivity.
  2. Replace shared PSK with enterprise 802.1X authentication and individual revocable identities where supported.
  3. Distinguish SSID network identity from per-radio BSSID and document the enterprise ESS design.
  4. Use suitable omnidirectional antennas and validate signal coverage with a site survey.

Explanation

Correct Answer

D:

This action addresses the specific requirement because omnidirectional antennas serve broad local coverage rather than focused long-range beams. The independent acceptance check is: RSSI and roaming tests meet targets across the intended public area.

Incorrect Answers

A:

This action addresses a different situation: A Wi-Fi analyst forces all laptops to 2.4 GHz despite good 5-GHz conditions, worsening congestion. It would not directly resolve the current network requirement because omnidirectional antennas serve broad local coverage rather than focused long-range beams.

B:

This action addresses a different situation: Employees use one shared Wi-Fi passphrase, and a departing contractor still knows it. It would not directly resolve the current network requirement because omnidirectional antennas serve broad local coverage rather than focused long-range beams.

C:

This action addresses a different situation: Users walk between multiple APs with the same SSID but support mistakes the radio BSSID for the network name. It would not directly resolve the current network requirement because omnidirectional antennas serve broad local coverage rather than focused long-range beams.

Question 350

An enterprise migration requires IPv4 services to remain reachable while new IPv6 applications are introduced. What acceptance result confirms the specified networking requirement is met?

  1. Test traffic follows approved tunnel paths while denied payload types remain blocked.
  2. IPv4 and IPv6 paths both pass authorized connectivity and firewall policy tests.
  3. A test device converges to the approved configuration and every change links to an audited revision.
  4. Allowed endpoints on matching VNIs communicate while unrelated tenants remain isolated.

Explanation

Correct Answer

B:

The intended action is: Operate compatible dual-stack interfaces and policies during the transition. This works because dual-stack retains both protocol families until traffic and dependencies migrate.

Incorrect Answers

A:

This choice would test a different networking condition: A company plans to enable IPv6 tunneling over IPv4 but assumes the encapsulated traffic bypasses security review. Its related action is: Include tunnel endpoints and encapsulated payload inspection in the approved security architecture.

C:

This choice would test a different networking condition: A large campus deploys identical branch switches manually and settings drift after every staff change. Its related action is: Use infrastructure-as-code templates in version control with reviewed automation and drift detection.

D:

This choice would test a different networking condition: A data center must extend segregated Layer 2 tenant segments over an IP-routed underlay between racks. Its related action is: Evaluate VXLAN overlays with appropriate VNI-to-tenant mappings and routed underlay reachability.