Question 330
Two 10-Gbps uplinks need aggregated bandwidth and redundancy between the same two switches. What observation most directly validates the chosen network solution?
Explanation
Correct Answer
The intended action is: Configure a compatible LACP link aggregation group across both endpoints. This works because lACP bundles compatible links logically while detecting member failures.
Incorrect Answers
This choice would test a different networking condition: Two access switches have redundant uplinks but spanning tree blocks both expected paths due to mis-wired loops. Its related action is: Audit the physical topology and STP root/port roles before overriding loop prevention.
This choice would test a different networking condition: A new VLAN exists on one switch but is missing on an adjacent switch, producing intermittent inter-floor reachability. Its related action is: Create/permit the VLAN on the required switches and verify trunk allowed-VLAN lists.
This choice would test a different networking condition: A storage device negotiates 1 Gbps despite its NIC and switch supporting 10 Gbps through the correct optic. Its related action is: Check interface and transceiver capabilities, autonegotiation policy and peer configuration.