McAfee-Secured Website

Exam Bundle

Exam Code: N10-009

Exam Name CompTIA Network+

Certification Provider: CompTIA

Corresponding Certification: CompTIA Network+

CompTIA N10-009 Bundle $44.99

100% CompTIA N10-009 Guaranteed Success With Testking Training Materials

Get Real N10-009 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    N10-009 Questions & Answers

    768 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual N10-009 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • N10-009 Video Course

    N10-009 Video Course

    240 Video Lectures

    N10-009 Video Course is developed by CompTIA Professionals to help you pass the N10-009 exam.

    Description

    This course will improve your knowledge and skills required to pass CompTIA Network+ exam.
  • Study Guide

    N10-009 Study Guide

    128 PDF Pages

    Developed by industry experts, this 128-page guide spells out in painstaking detail all of the information you need to ace N10-009 exam.

CompTIA Network+ (N10-009) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    768 Questions

    $124.99
  • N10-009 Video Course

    Video Course

    240 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    128 PDF Pages

    $29.99

CompTIA N10-009 Practice Test 19

Question 180

A company must allow an external supplier to query one HTTPS API but not browse the whole private network. Which post-change test best demonstrates that the problem is resolved?

  1. Authorized application exchanges work bidirectionally while explicitly prohibited new sessions fail.
  2. An unauthorized kiosk is denied or quarantined while a managed device receives its permitted access.
  3. Supplier credentials invoke only the intended API and lateral connectivity probes fail.
  4. A scan shows only approved services and factory credentials no longer work.

Explanation

Correct Answer

C:

The intended action is: Publish the specific API through a restricted reverse proxy or application gateway rather than wide routed VPN access. This works because application-specific access reduces exposed internal attack surface.

Incorrect Answers

A:

This choice would test a different networking condition: A network team implements ACL changes without testing response paths and unintentionally blocks established application replies. Its related action is: Evaluate stateful traffic behavior and symmetric policy requirements before rollout.

B:

This choice would test a different networking condition: A switch port serving an untrusted kiosk can plug into a sensitive VLAN when an employee swaps the cable. Its related action is: Enforce 802.1X network access control and restrict ports by authenticated identity and posture.

D:

This choice would test a different networking condition: A core switch has factory-default credentials and unused services enabled even though it carries sensitive traffic. Its related action is: Apply a secure device baseline, change default credentials and disable unneeded listeners and ports.

Question 181

A phishing simulation reveals passwords written on sticky notes near user workstations. Which post-change test best demonstrates that the problem is resolved?

  1. Clients receive only approved DHCP options and rogue offers are dropped.
  2. A walkthrough finds no exposed shared passwords and a controlled observer cannot harvest the test account.
  3. Legitimate service requests stay available during a simulated safe traffic surge while attack classes are filtered.
  4. The endpoint is isolated and scanning does not spread to other segments in a controlled exercise.

Explanation

Correct Answer

B:

The intended action is: Combine targeted social engineering awareness with safer authentication and secure credential storage. This works because shoulder surfing and physical credential exposure bypass perimeter controls.

Incorrect Answers

A:

This choice would test a different networking condition: Clients obtain a different DNS resolver and router from a rogue DHCP server plugged into an office switch. Its related action is: Enable DHCP snooping with trusted uplinks and deny server replies on untrusted access ports.

C:

This choice would test a different networking condition: A service receives traffic from thousands of machines saturating its internet edge bandwidth. Its related action is: Treat the event as DDoS and engage upstream mitigation/rate controls and capacity plans.

D:

This choice would test a different networking condition: A user opens a suspicious document and a network worm begins scanning many internal subnets. Its related action is: Contain the infected endpoint, investigate malware propagation and harden lateral network paths.

Question 182

A network rack uses two identical fiber pairs but one has transmit fibers crossed into transmit on the peer. After the change, which result is most relevant to the original failure?

  1. The optical link negotiates at 10 Gbps and stays within link-budget limits.
  2. A cable certification test passes with no pair shorts or excessive return loss.
  3. Both peers establish carrier with correct fiber mapping.
  4. The completed cable passes pair-map and transmission tests.

Explanation

Correct Answer

C:

The intended action is: Correct TX-to-RX polarity and test both directions. This works because duplex optical links need complementary transmit and receive paths.

Incorrect Answers

A:

This choice would test a different networking condition: A switch's 10-Gbps port has the correct fiber but incompatible SR optics on one side and LR optics on the other. Its related action is: Install matched, vendor-supported optics for the same wavelength and fiber type.

B:

This choice would test a different networking condition: A copper pair appears shorted in a cable tester after a technician crushed the cable under a raised floor. Its related action is: Replace the crushed segment and protect the replacement cable path.

D:

This choice would test a different networking condition: A cable tester reports pairs 1-2 and 3-6 swapped at one end after an office relocation. Its related action is: Correct the pinout to a consistent approved T568A or T568B scheme at both ends.

Question 183

A workstation captures Ethernet frames with correct MAC destinations but an application cannot establish a TCP session; the team is confusing frame forwarding with transport sessions. Which next action best addresses the stated networking problem?

  1. Diagnose transceiver power and physical media before changing VLANs or IP addresses.
  2. Inspect Layer 4 filtering and listener state for TCP 8443 independently of Layer 3 reachability.
  3. Examine application-layer name resolution and virtual-host selection rather than replace network adapters.
  4. Separate Layer 2 MAC delivery from Layer 4 TCP connection establishment when isolating the failed step.

Explanation

Correct Answer

D:

This action addresses the specific requirement because ethernet frame delivery does not prove a successful end-to-end TCP handshake. The independent acceptance check is: A frame trace confirms correct local MAC forwarding while SYN/SYN-ACK diagnostics identify the separate transport failure.

Incorrect Answers

A:

This action addresses a different situation: A fiber link reports loss of signal and no interface carrier while the switch has a valid VLAN configuration. It would not directly resolve the current network requirement because ethernet frame delivery does not prove a successful end-to-end TCP handshake.

B:

This action addresses a different situation: Two servers can exchange ICMP echo but application requests to TCP port 8443 time out at the remote listener. It would not directly resolve the current network requirement because ethernet frame delivery does not prove a successful end-to-end TCP handshake.

C:

This action addresses a different situation: A user can connect to an HTTPS server by IP address but the application cannot find the expected hostname. It would not directly resolve the current network requirement because ethernet frame delivery does not prove a successful end-to-end TCP handshake.

Question 184

An internet-facing mail relay sits in the same trusted network as domain controllers. Which measured outcome provides the strongest evidence of success?

  1. The relay serves internet clients but cannot directly access internal administrative endpoints.
  2. An unauthorized kiosk is denied or quarantined while a managed device receives its permitted access.
  3. A scan shows only approved services and factory credentials no longer work.
  4. A contractor can reach only assigned subnets and cannot authenticate with a password alone.

Explanation

Correct Answer

A:

The intended action is: Relocate public services to a screened subnet/DMZ with constrained routes to internal systems. This works because a screened subnet limits lateral movement if an exposed server is compromised.

Incorrect Answers

B:

This choice would test a different networking condition: A switch port serving an untrusted kiosk can plug into a sensitive VLAN when an employee swaps the cable. Its related action is: Enforce 802.1X network access control and restrict ports by authenticated identity and posture.

C:

This choice would test a different networking condition: A core switch has factory-default credentials and unused services enabled even though it carries sensitive traffic. Its related action is: Apply a secure device baseline, change default credentials and disable unneeded listeners and ports.

D:

This choice would test a different networking condition: A remote access VPN accepts all contractor logins into the full network after password authentication. Its related action is: Apply MFA and per-role VPN authorization with constrained network routes.

Question 185

A Wi-Fi expansion is approved using floor square footage but no signal strength or capacity study. What observation most directly validates the chosen network solution?

  1. A lab restore reproduces the intended VLAN and routing configuration from the latest protected backup.
  2. Survey measurements meet the planned RSSI, capacity and roaming thresholds.
  3. A spot check matches random live ports to their true patch panel and room locations.
  4. A peer can locate the next hop and its physical uplink from the synchronized records.

Explanation

Correct Answer

B:

The intended action is: Perform and document a predictive/active wireless survey and generate a heat map. This works because coverage and channel plans depend on building materials and demand, not only area.

Incorrect Answers

A:

This choice would test a different networking condition: A core switch loses its running configuration on reboot because only its startup state was backed up months ago. Its related action is: Schedule authenticated configuration backups and test restore integrity after significant changes.

C:

This choice would test a different networking condition: A site replaces its switch stack but existing cable maps still refer to demolished floors. Its related action is: Update rack diagrams, port maps and the decommission inventory as part of site cutover.

D:

This choice would test a different networking condition: An upgrade changes the routing design but engineers keep only a screenshot of the old physical switch layout. Its related action is: Update logical route maps and physical diagrams under the same change record.

Question 186

A company changes a web-service host but wants one alias used by customers instead of updating several A records. After the change, which result is most relevant to the original failure?

  1. An in-addr.arpa query yields the intended hostname for the test address.
  2. An IPv6-only test client resolves the AAAA record and loads the service.
  3. New clients form valid IPv6 addresses and learn the router through approved RAs.
  4. Resolving the customer alias yields the canonical target's current address.

Explanation

Correct Answer

D:

The intended action is: Use a CNAME alias where supported, with attention to DNS apex restrictions. This works because cNAME delegates a name to another canonical host name rather than directly storing an IP.

Incorrect Answers

A:

This choice would test a different networking condition: A monitoring system requires reverse mapping from an IPv4 address to a name. Its related action is: Maintain the matching PTR record in the authorized reverse DNS zone.

B:

This choice would test a different networking condition: A website requires IPv6 browser access but its DNS zone publishes only an A record. Its related action is: Publish a correct AAAA record and verify IPv6 listener reachability and security policy.

C:

This choice would test a different networking condition: IPv6 laptops need addresses based on router advertisements without relying on a stateful DHCPv6 address pool. Its related action is: Configure IPv6 SLAAC with suitable RA prefixes and compatible client policy.

Question 187

A 10-kilometer campus fiber path fails with high loss after multimode short-reach optics were installed. After the change, which result is most relevant to the original failure?

  1. Supported modules are recognized and negotiate the intended Ethernet speed at both ends.
  2. End-to-end strand mapping follows the approved polarity plan and every intended lane links.
  3. Measured receiver optical power and error rate meet the design specification over the full distance.
  4. A wiremap tester reports correct pairs and the Ethernet link negotiates expected speed.

Explanation

Correct Answer

C:

The intended action is: Select compatible single-mode fiber and correctly specified long-reach transceivers for the actual span. This works because optic reach and fiber type must match attenuation and link budget.

Incorrect Answers

A:

This choice would test a different networking condition: An engineer installs an SFP module in an incompatible QSFP cage and expects the link to establish. Its related action is: Match module form factor, port support, lane count and protocol on both endpoints.

B:

This choice would test a different networking condition: A data hall needs many parallel fiber strands terminated in a high-density trunk rather than individual LC connectors. Its related action is: Specify MPO/MTP-compatible multifiber assemblies with correct polarity and mating requirements.

D:

This choice would test a different networking condition: A desk switch has RJ45 jacks but the installer presents RJ11 telephone plugs and intermittent contact. Its related action is: Terminate twisted-pair Ethernet with supported RJ45 modular connectors and tested pair mapping.

Question 188

A restaurant guest WLAN requires a terms-of-use prompt before internet access but employees need certificate authentication. Which next action best addresses the stated networking problem?

  1. Use separate guest captive portal and enterprise-authenticated employee SSIDs with segmented paths.
  2. Reduce unnecessary wireless backhaul hops or use wired uplinks where possible.
  3. Replace shared PSK with enterprise 802.1X authentication and individual revocable identities where supported.
  4. Provide a compatible band/SSID for legacy clients instead of assuming all devices support 6 GHz.

Explanation

Correct Answer

A:

This action addresses the specific requirement because captive portals and enterprise identity serve different access goals. The independent acceptance check is: Guests see the portal and cannot reach staff VLANs; staff authenticate through managed credentials.

Incorrect Answers

B:

This action addresses a different situation: A mesh WLAN has too many repeaters in series and throughput falls at the far end. It would not directly resolve the current network requirement because captive portals and enterprise identity serve different access goals.

C:

This action addresses a different situation: Employees use one shared Wi-Fi passphrase, and a departing contractor still knows it. It would not directly resolve the current network requirement because captive portals and enterprise identity serve different access goals.

D:

This action addresses a different situation: A floor's 6-GHz SSID is invisible to older 2.4/5-GHz-only client hardware. It would not directly resolve the current network requirement because captive portals and enterprise identity serve different access goals.

Question 189

Users walk between multiple APs with the same SSID but support mistakes the radio BSSID for the network name. What is the most appropriate network configuration or troubleshooting action for this requirement?

  1. Verify controller discovery, management reachability and authorized AP adoption.
  2. Distinguish SSID network identity from per-radio BSSID and document the enterprise ESS design.
  3. Enable suitable band steering while ensuring clients retain compatible connectivity.
  4. Select an autonomous or locally capable AP deployment model with maintainable local security settings.

Explanation

Correct Answer

B:

This action addresses the specific requirement because bSSID identifies a basic radio cell while an SSID can span many AP cells. The independent acceptance check is: Roaming clients observe one SSID and distinct BSSIDs without unnecessary reconnections.

Incorrect Answers

A:

This action addresses a different situation: A newly installed lightweight AP cannot serve users because it has not joined its controller. It would not directly resolve the current network requirement because bSSID identifies a basic radio cell while an SSID can span many AP cells.

C:

This action addresses a different situation: A Wi-Fi analyst forces all laptops to 2.4 GHz despite good 5-GHz conditions, worsening congestion. It would not directly resolve the current network requirement because bSSID identifies a basic radio cell while an SSID can span many AP cells.

D:

This action addresses a different situation: A standalone remote-office AP must operate without controller connectivity for months. It would not directly resolve the current network requirement because bSSID identifies a basic radio cell while an SSID can span many AP cells.

Question 190

A network rack is too shallow for new deep switches, and front cables block airflow. Select the most defensible networking decision for this case.

  1. Calculate the switch PoE power budget against total worst-case device demand and add capacity.
  2. Route the fiber in protected pathways with appropriate bend radius and strain relief.
  3. Confirm rack-unit height, device depth, front/rear service clearance and cable management before mounting.
  4. Choose code-compliant detection/suppression and evaluate equipment shutdown and personnel safety.

Explanation

Correct Answer

C:

This action addresses the specific requirement because physical fit includes depth, cable bend radius and access, not only rack-unit height. The independent acceptance check is: Equipment mounts safely with service clearance and no compressed or obstructed cabling.

Incorrect Answers

A:

This action addresses a different situation: A branch PoE switch powers cameras until all IR LEDs turn on at night, then several cameras reboot. It would not directly resolve the current network requirement because physical fit includes depth, cable bend radius and access, not only rack-unit height.

B:

This action addresses a different situation: A new fiber run passes directly through an unprotected door hinge and repeatedly fails inspection. It would not directly resolve the current network requirement because physical fit includes depth, cable bend radius and access, not only rack-unit height.

D:

This action addresses a different situation: A data center has no suitable fire suppression review even though sealed racks contain critical switching. It would not directly resolve the current network requirement because physical fit includes depth, cable bend radius and access, not only rack-unit height.