McAfee-Secured Website

Exam Bundle

Exam Code: N10-009

Exam Name CompTIA Network+

Certification Provider: CompTIA

Corresponding Certification: CompTIA Network+

CompTIA N10-009 Bundle $44.99

100% CompTIA N10-009 Guaranteed Success With Testking Training Materials

Get Real N10-009 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    N10-009 Questions & Answers

    768 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual N10-009 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • N10-009 Video Course

    N10-009 Video Course

    240 Video Lectures

    N10-009 Video Course is developed by CompTIA Professionals to help you pass the N10-009 exam.

    Description

    This course will improve your knowledge and skills required to pass CompTIA Network+ exam.
  • Study Guide

    N10-009 Study Guide

    128 PDF Pages

    Developed by industry experts, this 128-page guide spells out in painstaking detail all of the information you need to ace N10-009 exam.

CompTIA Network+ (N10-009) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    768 Questions

    $124.99
  • N10-009 Video Course

    Video Course

    240 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    128 PDF Pages

    $29.99

CompTIA N10-009 Practice Test 16

Question 150

An application sees long delays despite low interface usage; WAN RTT is 170 ms and calls are synchronous and sequential. Select the most defensible networking decision for this case.

  1. Reduce serial round trips using batching/caching or relocate a suitable dependency closer to callers.
  2. Validate path TCP option handling and allow supported window scaling without compromising policy.
  3. Determine whether queue congestion or capacity is the cause and adjust shaping or upgrade capacity.
  4. Standardize path MTU across all hops or use compatible packet sizes.

Explanation

Correct Answer

A:

This action addresses the specific requirement because network latency can dominate response time even without bandwidth congestion. The independent acceptance check is: Request traces show fewer round trips and lower end-to-end response time.

Incorrect Answers

B:

This action addresses a different situation: A user experiences slow downloads because a firewall blocks TCP window scaling options on long-delay links. It would not directly resolve the current network requirement because network latency can dominate response time even without bandwidth congestion.

C:

This action addresses a different situation: An ISP reports 1% packet loss only at peak traffic, and firewall drop queues spike at the same time. It would not directly resolve the current network requirement because network latency can dominate response time even without bandwidth congestion.

D:

This action addresses a different situation: A storage VLAN's jumbo traffic drops intermittently when traversing an intermediate 1500-byte link. It would not directly resolve the current network requirement because network latency can dominate response time even without bandwidth congestion.

Question 151

A developer blames DNS for unreadable character encoding even though the name resolves and HTTP responses arrive. What acceptance result confirms the specified networking requirement is met?

  1. The client reestablishes a valid session without corrupting transaction state during a controlled route failover.
  2. Correctly decoded responses appear after encoding settings change while DNS and TCP counters remain healthy.
  3. A frame trace confirms correct local MAC forwarding while SYN/SYN-ACK diagnostics identify the separate transport failure.
  4. A TCP connection succeeds on 8443 after the rule or listener is corrected, with ICMP behavior unchanged.

Explanation

Correct Answer

B:

The intended action is: Investigate representation and character-set negotiation above the network and transport layers. This works because data formatting is distinct from IP routing and TCP delivery.

Incorrect Answers

A:

This choice would test a different networking condition: A multi-site monitoring dashboard reports intermittent application session resets during failover even though routing converges quickly. Its related action is: Investigate session persistence and application reconnection logic rather than only layer-three route metrics.

C:

This choice would test a different networking condition: A workstation captures Ethernet frames with correct MAC destinations but an application cannot establish a TCP session; the team is confusing frame forwarding with transport sessions. Its related action is: Separate Layer 2 MAC delivery from Layer 4 TCP connection establishment when isolating the failed step.

D:

This choice would test a different networking condition: Two servers can exchange ICMP echo but application requests to TCP port 8443 time out at the remote listener. Its related action is: Inspect Layer 4 filtering and listener state for TCP 8443 independently of Layer 3 reachability.

Question 152

A site can ping its mail exchanger but inbound email fails after a change to MX records. What is the most appropriate network configuration or troubleshooting action for this requirement?

  1. Correct MX preferences and destinations, including the referenced mail host records.
  2. Test the file server's SMB listener and TCP 445 filtering, plus access policy.
  3. Inspect relevant route-table entries and next hops, restoring the authorized destination route.
  4. Repair the alias target chain and verify the final A/AAAA resolution.

Explanation

Correct Answer

A:

This action addresses the specific requirement because mX records direct mail delivery independent of ordinary web reachability. The independent acceptance check is: A test message reaches the intended mail server through the published MX path.

Incorrect Answers

B:

This action addresses a different situation: A central file share refuses SMB sessions on one VLAN while successful DNS and ICMP probes continue. It would not directly resolve the current network requirement because mX records direct mail delivery independent of ordinary web reachability.

C:

This action addresses a different situation: Clients reach two local VLANs but the route to an external site disappears after a routing-policy change. It would not directly resolve the current network requirement because mX records direct mail delivery independent of ordinary web reachability.

D:

This action addresses a different situation: An enterprise portal fails only when accessed by name after its DNS CNAME target was deleted. It would not directly resolve the current network requirement because mX records direct mail delivery independent of ordinary web reachability.

Question 153

An edge router has a static route to 203.0.113.0/24 but the remote network moves and the static next hop no longer exists. What should the network administrator implement first to meet this requirement?

  1. Use a first-hop redundancy protocol with a virtual IP and tracked master/active role.
  2. Align OSPF interface parameters required for adjacency, including hello and dead intervals.
  3. Configure a precise static destination route with the least broad valid prefix and next hop.
  4. Replace the stale static next hop or adopt an appropriate dynamic routing process for changing connectivity.

Explanation

Correct Answer

D:

This action addresses the specific requirement because static routes do not learn a changed next hop automatically. The independent acceptance check is: Route-table inspection and end-to-end probes confirm the active next hop reaches the moved subnet.

Incorrect Answers

A:

This action addresses a different situation: Two routers provide a shared LAN default gateway but a single router outage forces manual host gateway changes. It would not directly resolve the current network requirement because static routes do not learn a changed next hop automatically.

B:

This action addresses a different situation: Two sites run OSPF and a new neighbor remains in an INIT state because the two routers use incompatible hello timers. It would not directly resolve the current network requirement because static routes do not learn a changed next hop automatically.

C:

This action addresses a different situation: A transit router needs an explicit route for a small remote network but the proposed solution advertises every internal prefix globally. It would not directly resolve the current network requirement because static routes do not learn a changed next hop automatically.

Question 154

A warehouse has two isolated IPv4 subnets and wants packets forwarded between them under a controlled route policy. After the change, which result is most relevant to the original failure?

  1. Newly provisioned APs adopt the approved SSIDs and settings without manual per-AP drift.
  2. Clients browse shared folders while VM hosts see separately provisioned block volumes as intended.
  3. Clients on permitted subnets communicate across the routed boundary and denied flows remain blocked.
  4. The IDS records the simulated pattern while mirrored traffic does not change endpoint forwarding.

Explanation

Correct Answer

C:

The intended action is: Deploy or configure a Layer 3 router or routing-capable switch with inter-subnet routing and ACL controls. This works because ordinary Layer 2 switching does not route between separate IP networks.

Incorrect Answers

A:

This choice would test a different networking condition: Thousands of Wi-Fi clients require uniform SSIDs and radio settings across multiple office floors. Its related action is: Use centrally managed lightweight APs and a compatible wireless controller or cloud management.

B:

This choice would test a different networking condition: A team compares SMB access to a shared office folder with low-latency block storage for virtual-machine disk volumes. Its related action is: Choose a NAS-style file share for files and SAN or block storage for supported raw volume workloads.

D:

This choice would test a different networking condition: A SOC needs a copy of suspicious east-west packets for investigation without risking an inline outage. Its related action is: Use passive IDS monitoring with a properly scoped mirror or network tap.

Question 155

A new monitoring tool discovers devices but lacks serial numbers, licensing status and owners. Which next action best addresses the stated networking problem?

  1. Record an emergency change with risk justification, monitoring and retrospective approval.
  2. Update logical route maps and physical diagrams under the same change record.
  3. Reconcile hardware/software asset inventory with warranty, license and accountable support owners.
  4. Perform and document a predictive/active wireless survey and generate a heat map.

Explanation

Correct Answer

C:

This action addresses the specific requirement because device identity and lifecycle metadata are required for reliable operations decisions. The independent acceptance check is: Every discovered production node maps to a supported asset record with a named owner.

Incorrect Answers

A:

This action addresses a different situation: An emergency routing fix is technically successful but has no documented approval or follow-up review. It would not directly resolve the current network requirement because device identity and lifecycle metadata are required for reliable operations decisions.

B:

This action addresses a different situation: An upgrade changes the routing design but engineers keep only a screenshot of the old physical switch layout. It would not directly resolve the current network requirement because device identity and lifecycle metadata are required for reliable operations decisions.

D:

This action addresses a different situation: A Wi-Fi expansion is approved using floor square footage but no signal strength or capacity study. It would not directly resolve the current network requirement because device identity and lifecycle metadata are required for reliable operations decisions.

Question 156

A Linux host has IPv6 addresses but cannot resolve IPv6-only service names because its DNS query finds no AAAA records. Which post-change test best demonstrates that the problem is resolved?

  1. The host resolves the proper AAAA and reaches the IPv6 listener.
  2. A name query returns the expected host without dangling aliases.
  3. Lease free-count stays healthy through peak arrival and valid clients get addresses.
  4. The hostname returns the intended address and browser access works.

Explanation

Correct Answer

A:

The intended action is: Check authoritative AAAA publishing and recursive resolver reachability for the hostname. This works because iPv6 host addressing and DNS record publication are separate requirements.

Incorrect Answers

B:

This choice would test a different networking condition: An enterprise portal fails only when accessed by name after its DNS CNAME target was deleted. Its related action is: Repair the alias target chain and verify the final A/AAAA resolution.

C:

This choice would test a different networking condition: A DHCP scope exhausts addresses at 9 a.m. because wireless guests retain week-long leases after leaving. Its related action is: Resize the eligible scope or shorten guest lease duration to reflect churn.

D:

This choice would test a different networking condition: All clients in one subnet can reach the IP of a website but cannot resolve its FQDN. Its related action is: Check resolver addresses, DNS queries and zone records rather than default-route forwarding alone.

Question 157

Two users report independent failures after a WAN outage, but the NOC assumes both share one cause. After the change, which result is most relevant to the original failure?

  1. Tests distinguish a site-wide WAN failure from a client-specific DNS issue.
  2. The host receives correct VLAN reachability and the initial incident is no longer reproducible.
  3. Business traffic passes while prohibited source/destination tests remain denied.
  4. A second engineer can identify the actual trigger, recovery command and preventive control from the record.

Explanation

Correct Answer

A:

The intended action is: Divide the symptoms by path/service and test each probable cause separately. This works because simultaneous incidents can have unrelated local and shared faults.

Incorrect Answers

B:

This choice would test a different networking condition: A technician confirms an incorrect VLAN assignment but plans to keep testing DNS without correcting the known defect. Its related action is: Implement the validated VLAN correction through approved change process and retest the original symptom.

C:

This choice would test a different networking condition: An engineer fixes lost connectivity by disabling the security ACL but never restores the intended protections. Its related action is: Apply a targeted rule correction and verify both service functionality and security controls.

D:

This choice would test a different networking condition: A site-to-site VPN starts working after a restart, and the ticket is closed without capturing cause or lessons. Its related action is: Document evidence, action, outcome and prevention steps in the incident record.

Question 158

A data hall needs many parallel fiber strands terminated in a high-density trunk rather than individual LC connectors. Which solution best satisfies the technical constraint without introducing unrelated changes?

  1. Terminate twisted-pair Ethernet with supported RJ45 modular connectors and tested pair mapping.
  2. Match module form factor, port support, lane count and protocol on both endpoints.
  3. Choose matched LC duplex patch leads with the correct polish and fiber type.
  4. Specify MPO/MTP-compatible multifiber assemblies with correct polarity and mating requirements.

Explanation

Correct Answer

D:

This action addresses the specific requirement because multifiber connectors reduce density but require deliberate polarity and keying. The independent acceptance check is: End-to-end strand mapping follows the approved polarity plan and every intended lane links.

Incorrect Answers

A:

This action addresses a different situation: A desk switch has RJ45 jacks but the installer presents RJ11 telephone plugs and intermittent contact. It would not directly resolve the current network requirement because multifiber connectors reduce density but require deliberate polarity and keying.

B:

This action addresses a different situation: An engineer installs an SFP module in an incompatible QSFP cage and expects the link to establish. It would not directly resolve the current network requirement because multifiber connectors reduce density but require deliberate polarity and keying.

C:

This action addresses a different situation: A fiber patch shelf has duplex LC ports but the replacement patch cable uses incompatible connector geometry. It would not directly resolve the current network requirement because multifiber connectors reduce density but require deliberate polarity and keying.

Question 159

A WAN circuit shows different latency on each branch and operators need round-trip loss over many intermediate hops. Which verification finding would support closing this network issue?

  1. The capture shows the relevant offer or handshake sequence without collecting unrelated user data.
  2. Repeated measurements correlate degraded performance to a consistent segment rather than an isolated ICMP filter.
  3. The test identifies the exact faulty pair and a replacement passes verification.
  4. The identified jack-to-panel mapping agrees with final continuity testing.

Explanation

Correct Answer

B:

The intended action is: Use pathping or sustained traceroute-style probes with awareness of ICMP rate limiting. This works because multiple-hop loss/latency tools provide hints to link conditions beyond a single echo.

Incorrect Answers

A:

This choice would test a different networking condition: An operator wants to inspect DHCP and TLS packets on a permitted lab interface to explain a failed handshake. Its related action is: Capture the traffic with Wireshark or tcpdump using a scoped capture filter.

C:

This choice would test a different networking condition: A field installer must determine whether a copper cable is open, shorted or miswired. Its related action is: Use a cable wiremap/continuity tester or qualifying cable certifier.

D:

This choice would test a different networking condition: A technician suspects an unused cable jack connects to the wrong patch panel port but labels are missing. Its related action is: Use a toner and probe or appropriate cable-tracing tool to locate the far end.

Question 160

An outdoor cable develops errors after rain and technicians find corrosion inside a patch panel. Select the most defensible networking decision for this case.

  1. Shorten/restructure the horizontal link or add a compliant active distribution point.
  2. Check PoE class and total power budget versus peak device draw.
  3. Replace moisture-damaged cabling/terminations and protect the entrance from water.
  4. Inspect and repair the event at the measured OTDR distance.

Explanation

Correct Answer

C:

This action addresses the specific requirement because water ingress increases loss and can short or corrode contacts. The independent acceptance check is: Link errors cease in wet conditions and insulation inspection is clean.

Incorrect Answers

A:

This action addresses a different situation: A 110-meter permanent copper run repeatedly fails 1-Gbps certification. It would not directly resolve the current network requirement because water ingress increases loss and can short or corrode contacts.

B:

This action addresses a different situation: A PoE camera reboots only when its heater activates, but the network link tests clean. It would not directly resolve the current network requirement because water ingress increases loss and can short or corrode contacts.

D:

This action addresses a different situation: A fiber OTDR trace shows a large reflection at a newly installed mechanical connector. It would not directly resolve the current network requirement because water ingress increases loss and can short or corrode contacts.