McAfee-Secured Website

Exam Bundle

Exam Code: 220-1201

Exam Name CompTIA A+ Certification Exam: Core 1

Certification Provider: CompTIA

Corresponding Certification: CompTIA A+

CompTIA 220-1201 Bundle $44.99

100% CompTIA 220-1201 Guaranteed Success With Testking Training Materials

Get Real 220-1201 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    220-1201 Questions & Answers

    527 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 220-1201 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 220-1201 Video Course

    220-1201 Video Course

    106 Video Lectures

    220-1201 Video Course is developed by CompTIA Professionals to help you pass the 220-1201 exam.

    Description

    This course will improve your knowledge and skills required to pass CompTIA A+ Certification Exam: Core 1 exam.
  • Study Guide

    220-1201 Study Guide

    2615 PDF Pages

    Developed by industry experts, this 2615-page guide spells out in painstaking detail all of the information you need to ace 220-1201 exam.

CompTIA A+ Certification Exam: Core 1 (220-1201) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    527 Questions

    $124.99
  • 220-1201 Video Course

    Video Course

    106 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    2615 PDF Pages

    $29.99

CompTIA 220-1201 Practice Test 76

Question 750

A workstation advertises HDR video but its display is limited to standard dynamic range and cannot show appropriate highlight detail. Which test outcome demonstrates that the chosen action worked?

  1. An HDR test reports proper tone mapping and visible highlight gradation.
  2. A high-contrast test shows controlled black zones and preserved highlights.
  3. A measured neutral-gray and skin-tone target matches calibration tolerances.
  4. The screen displays correctly and a touch-grid test registers all points.

Explanation

Correct Answer

A:

HDR reproduction requires suitable panel capabilities and compatible signal processing. The outcome “An HDR test reports proper tone mapping and visible highlight gradation.” verifies the action “Choose an HDR-capable display and a supported end-to-end video signal mode.” for this situation: A workstation advertises HDR video but its display is limited to standard dynamic range and cannot show appropriate highlight detail.

Incorrect Answers

B:

Mini-LED backlights adjust local LCD illumination; they are not individually emissive pixels. For the situation described—A workstation advertises HDR video but its display is limited to standard dynamic range and cannot show appropriate highlight detail—this would not demonstrate the specified intervention. The relevant evidence is “An HDR test reports proper tone mapping and visible highlight gradation.”.

C:

Color profiles and calibration govern color accuracy beyond the panel technology alone. For the situation described—A workstation advertises HDR video but its display is limited to standard dynamic range and cannot show appropriate highlight detail—this would not demonstrate the specified intervention. The relevant evidence is “An HDR test reports proper tone mapping and visible highlight gradation.”.

D:

An LCD panel supplies pixels while the digitizer is needed to detect touch input. For the situation described—A workstation advertises HDR video but its display is limited to standard dynamic range and cannot show appropriate highlight detail—this would not demonstrate the specified intervention. The relevant evidence is “An HDR test reports proper tone mapping and visible highlight gradation.”.

Question 751

A shared kiosk requires an LED-backlit LCD that remains readable in bright indoor lighting without OLED static-image aging. Which action most directly addresses this problem?

  1. Install the manufacturer-compatible touch display/digitizer assembly.
  2. Check the digitizer connection and perform supported touch calibration.
  3. Select a suitably bright LED-backlit LCD based on sustained luminance.
  4. Select a suitable VA-panel display with measured contrast specifications.

Explanation

Correct Answer

C:

An LCD modulates a separate backlight and avoids OLED's emissive pixel aging behavior. In this situation—A shared kiosk requires an LED-backlit LCD that remains readable in bright indoor lighting without OLED static-image aging—the right response is “Select a suitably bright LED-backlit LCD based on sustained luminance.”. A confirming result would be “A daytime legibility test remains readable without persistent logo ghosting.”.

Incorrect Answers

A:

An LCD panel supplies pixels while the digitizer is needed to detect touch input. That does not directly address the condition described—A shared kiosk requires an LED-backlit LCD that remains readable in bright indoor lighting without OLED static-image aging. “Select a suitably bright LED-backlit LCD based on sustained luminance.” is the appropriate response because an LCD modulates a separate backlight and avoids OLED's emissive pixel aging behavior.

B:

The touch digitizer maps physical contact separately from LCD pixels. That does not directly address the condition described—A shared kiosk requires an LED-backlit LCD that remains readable in bright indoor lighting without OLED static-image aging. “Select a suitably bright LED-backlit LCD based on sustained luminance.” is the appropriate response because an LCD modulates a separate backlight and avoids OLED's emissive pixel aging behavior.

D:

VA LCD technology generally emphasizes higher native contrast than many TN and IPS models. That does not directly address the condition described—A shared kiosk requires an LED-backlit LCD that remains readable in bright indoor lighting without OLED static-image aging. “Select a suitably bright LED-backlit LCD based on sustained luminance.” is the appropriate response because an LCD modulates a separate backlight and avoids OLED's emissive pixel aging behavior.

Question 752

A shared kiosk requires an LED-backlit LCD that remains readable in bright indoor lighting without OLED static-image aging. Which result BEST confirms the problem has been resolved?

  1. Extended mixed-content testing shows no persistent static-image retention.
  2. The internal panel reaches normal brightness across a uniform test.
  3. The screen displays correctly and a touch-grid test registers all points.
  4. A daytime legibility test remains readable without persistent logo ghosting.

Explanation

Correct Answer

D:

An LCD modulates a separate backlight and avoids OLED's emissive pixel aging behavior. The outcome “A daytime legibility test remains readable without persistent logo ghosting.” verifies the action “Select a suitably bright LED-backlit LCD based on sustained luminance.” for this situation: A shared kiosk requires an LED-backlit LCD that remains readable in bright indoor lighting without OLED static-image aging.

Incorrect Answers

A:

Organic emitters can age unevenly when static elements remain visible. For the situation described—A shared kiosk requires an LED-backlit LCD that remains readable in bright indoor lighting without OLED static-image aging—this would not demonstrate the specified intervention. The relevant evidence is “A daytime legibility test remains readable without persistent logo ghosting.”.

B:

A faint image with no illumination indicates a backlight path fault, not absent video data. For the situation described—A shared kiosk requires an LED-backlit LCD that remains readable in bright indoor lighting without OLED static-image aging—this would not demonstrate the specified intervention. The relevant evidence is “A daytime legibility test remains readable without persistent logo ghosting.”.

C:

An LCD panel supplies pixels while the digitizer is needed to detect touch input. For the situation described—A shared kiosk requires an LED-backlit LCD that remains readable in bright indoor lighting without OLED static-image aging—this would not demonstrate the specified intervention. The relevant evidence is “A daytime legibility test remains readable without persistent logo ghosting.”.

Question 753

A photographer's IPS laptop display exhibits unexpected orange skin tones after a color profile change. What is the MOST appropriate technician response?

  1. Specify a color-accurate IPS-class panel with appropriate calibration.
  2. Select a panel with verified gamut coverage and calibrate it.
  3. Install the manufacturer-compatible touch display/digitizer assembly.
  4. Calibrate the display and apply the correct ICC color profile.

Explanation

Correct Answer

D:

Color profiles and calibration govern color accuracy beyond the panel technology alone. In this situation—A photographer's IPS laptop display exhibits unexpected orange skin tones after a color profile change—the right response is “Calibrate the display and apply the correct ICC color profile.”. A confirming result would be “A measured neutral-gray and skin-tone target matches calibration tolerances.”.

Incorrect Answers

A:

IPS panels generally offer stronger viewing-angle consistency than basic TN. That does not directly address the condition described—A photographer's IPS laptop display exhibits unexpected orange skin tones after a color profile change. “Calibrate the display and apply the correct ICC color profile.” is the appropriate response because color profiles and calibration govern color accuracy beyond the panel technology alone.

B:

Color gamut coverage concerns reproducible color range, not just refresh rate. That does not directly address the condition described—A photographer's IPS laptop display exhibits unexpected orange skin tones after a color profile change. “Calibrate the display and apply the correct ICC color profile.” is the appropriate response because color profiles and calibration govern color accuracy beyond the panel technology alone.

C:

An LCD panel supplies pixels while the digitizer is needed to detect touch input. That does not directly address the condition described—A photographer's IPS laptop display exhibits unexpected orange skin tones after a color profile change. “Calibrate the display and apply the correct ICC color profile.” is the appropriate response because color profiles and calibration govern color accuracy beyond the panel technology alone.

Question 754

A photographer's IPS laptop display exhibits unexpected orange skin tones after a color profile change. Which observation directly verifies a successful repair?

  1. A daytime legibility test remains readable without persistent logo ghosting.
  2. An HDR test reports proper tone mapping and visible highlight gradation.
  3. The screen displays correctly and a touch-grid test registers all points.
  4. A measured neutral-gray and skin-tone target matches calibration tolerances.

Explanation

Correct Answer

D:

Color profiles and calibration govern color accuracy beyond the panel technology alone. The outcome “A measured neutral-gray and skin-tone target matches calibration tolerances.” verifies the action “Calibrate the display and apply the correct ICC color profile.” for this situation: A photographer's IPS laptop display exhibits unexpected orange skin tones after a color profile change.

Incorrect Answers

A:

An LCD modulates a separate backlight and avoids OLED's emissive pixel aging behavior. For the situation described—A photographer's IPS laptop display exhibits unexpected orange skin tones after a color profile change—this would not demonstrate the specified intervention. The relevant evidence is “A measured neutral-gray and skin-tone target matches calibration tolerances.”.

B:

HDR reproduction requires suitable panel capabilities and compatible signal processing. For the situation described—A photographer's IPS laptop display exhibits unexpected orange skin tones after a color profile change—this would not demonstrate the specified intervention. The relevant evidence is “A measured neutral-gray and skin-tone target matches calibration tolerances.”.

C:

An LCD panel supplies pixels while the digitizer is needed to detect touch input. For the situation described—A photographer's IPS laptop display exhibits unexpected orange skin tones after a color profile change—this would not demonstrate the specified intervention. The relevant evidence is “A measured neutral-gray and skin-tone target matches calibration tolerances.”.

Question 755

A gaming monitor flickers when switched to 4K at 144 Hz through a link supporting only lower total bandwidth. Which change best satisfies the stated requirement?

  1. Use content rotation, brightness management or a suitable low-retention display replacement.
  2. Use an interface, cable, and supported timing combination within the monitor's link bandwidth.
  3. Choose a fast-response display mode and panel meeting the required refresh specifications.
  4. Choose an HDR-capable display and a supported end-to-end video signal mode.

Explanation

Correct Answer

B:

Pixel rate, chroma encoding, and refresh rate all contribute to required video-link bandwidth. In this situation—A gaming monitor flickers when switched to 4K at 144 Hz through a link supporting only lower total bandwidth—the right response is “Use an interface, cable, and supported timing combination within the monitor's link bandwidth.”. A confirming result would be “The display holds the intended resolution and refresh without signal drops.”.

Incorrect Answers

A:

Organic emitters can age unevenly when static elements remain visible. That does not directly address the condition described—A gaming monitor flickers when switched to 4K at 144 Hz through a link supporting only lower total bandwidth. “Use an interface, cable, and supported timing combination within the monitor's link bandwidth.” is the appropriate response because pixel rate, chroma encoding, and refresh rate all contribute to required video-link bandwidth.

C:

Panel response time and refresh affect motion clarity independently of nominal resolution. That does not directly address the condition described—A gaming monitor flickers when switched to 4K at 144 Hz through a link supporting only lower total bandwidth. “Use an interface, cable, and supported timing combination within the monitor's link bandwidth.” is the appropriate response because pixel rate, chroma encoding, and refresh rate all contribute to required video-link bandwidth.

D:

HDR reproduction requires suitable panel capabilities and compatible signal processing. That does not directly address the condition described—A gaming monitor flickers when switched to 4K at 144 Hz through a link supporting only lower total bandwidth. “Use an interface, cable, and supported timing combination within the monitor's link bandwidth.” is the appropriate response because pixel rate, chroma encoding, and refresh rate all contribute to required video-link bandwidth.

Question 756

A gaming monitor flickers when switched to 4K at 144 Hz through a link supporting only lower total bandwidth. What evidence shows that the intended requirement has been met?

  1. Extended mixed-content testing shows no persistent static-image retention.
  2. A daytime legibility test remains readable without persistent logo ghosting.
  3. A high-contrast test shows controlled black zones and preserved highlights.
  4. The display holds the intended resolution and refresh without signal drops.

Explanation

Correct Answer

D:

Pixel rate, chroma encoding, and refresh rate all contribute to required video-link bandwidth. The outcome “The display holds the intended resolution and refresh without signal drops.” verifies the action “Use an interface, cable, and supported timing combination within the monitor's link bandwidth.” for this situation: A gaming monitor flickers when switched to 4K at 144 Hz through a link supporting only lower total bandwidth.

Incorrect Answers

A:

Organic emitters can age unevenly when static elements remain visible. For the situation described—A gaming monitor flickers when switched to 4K at 144 Hz through a link supporting only lower total bandwidth—this would not demonstrate the specified intervention. The relevant evidence is “The display holds the intended resolution and refresh without signal drops.”.

B:

An LCD modulates a separate backlight and avoids OLED's emissive pixel aging behavior. For the situation described—A gaming monitor flickers when switched to 4K at 144 Hz through a link supporting only lower total bandwidth—this would not demonstrate the specified intervention. The relevant evidence is “The display holds the intended resolution and refresh without signal drops.”.

C:

Mini-LED backlights adjust local LCD illumination; they are not individually emissive pixels. For the situation described—A gaming monitor flickers when switched to 4K at 144 Hz through a link supporting only lower total bandwidth—this would not demonstrate the specified intervention. The relevant evidence is “The display holds the intended resolution and refresh without signal drops.”.

Question 757

A technician installs an RJ45 plug onto a flat telephone cable and expects reliable gigabit Ethernet performance. What should the technician configure or repair to resolve this issue?

  1. Replace it with correctly rated four-pair twisted-pair Ethernet cable and termination.
  2. Use the specified RS-232 serial/console lead and supported USB-serial adapter if needed.
  3. Use standards-compliant cable segments with an intermediate active device or fiber path.
  4. Use the connector and impedance rating specified for the coaxial camera system.

Explanation

Correct Answer

A:

Gigabit copper Ethernet requires suitable four-pair cabling rather than ordinary flat telephone cord. In this situation—A technician installs an RJ45 plug onto a flat telephone cable and expects reliable gigabit Ethernet performance—the right response is “Replace it with correctly rated four-pair twisted-pair Ethernet cable and termination.”. A confirming result would be “A 1000BASE-T test negotiates gigabit with acceptable pair integrity.”.

Incorrect Answers

B:

RS-232 serial pinouts and signaling differ from ordinary Ethernet data cabling. That does not directly address the condition described—A technician installs an RJ45 plug onto a flat telephone cable and expects reliable gigabit Ethernet performance. “Replace it with correctly rated four-pair twisted-pair Ethernet cable and termination.” is the appropriate response because gigabit copper Ethernet requires suitable four-pair cabling rather than ordinary flat telephone cord.

C:

Conventional copper Ethernet channel reach is typically limited to around 100 meters. That does not directly address the condition described—A technician installs an RJ45 plug onto a flat telephone cable and expects reliable gigabit Ethernet performance. “Replace it with correctly rated four-pair twisted-pair Ethernet cable and termination.” is the appropriate response because gigabit copper Ethernet requires suitable four-pair cabling rather than ordinary flat telephone cord.

D:

Coaxial systems use impedance-controlled connectors such as BNC, not twisted-pair Ethernet jacks. That does not directly address the condition described—A technician installs an RJ45 plug onto a flat telephone cable and expects reliable gigabit Ethernet performance. “Replace it with correctly rated four-pair twisted-pair Ethernet cable and termination.” is the appropriate response because gigabit copper Ethernet requires suitable four-pair cabling rather than ordinary flat telephone cord.

Question 758

A technician installs an RJ45 plug onto a flat telephone cable and expects reliable gigabit Ethernet performance. How should the technician verify the corrective change?

  1. The resulting link operates within supported length and loss limits.
  2. A 1000BASE-T test negotiates gigabit with acceptable pair integrity.
  3. Link errors fall after the cable and shield termination are verified.
  4. Both transceivers establish optical link at expected receive power.

Explanation

Correct Answer

B:

Gigabit copper Ethernet requires suitable four-pair cabling rather than ordinary flat telephone cord. The outcome “A 1000BASE-T test negotiates gigabit with acceptable pair integrity.” verifies the action “Replace it with correctly rated four-pair twisted-pair Ethernet cable and termination.” for this situation: A technician installs an RJ45 plug onto a flat telephone cable and expects reliable gigabit Ethernet performance.

Incorrect Answers

A:

Conventional copper Ethernet channel reach is typically limited to around 100 meters. For the situation described—A technician installs an RJ45 plug onto a flat telephone cable and expects reliable gigabit Ethernet performance—this would not demonstrate the specified intervention. The relevant evidence is “A 1000BASE-T test negotiates gigabit with acceptable pair integrity.”.

C:

Shielding can mitigate electromagnetic interference when installed correctly. For the situation described—A technician installs an RJ45 plug onto a flat telephone cable and expects reliable gigabit Ethernet performance—this would not demonstrate the specified intervention. The relevant evidence is “A 1000BASE-T test negotiates gigabit with acceptable pair integrity.”.

D:

LC and SC are different fiber connector geometries and require compatible mating interfaces. For the situation described—A technician installs an RJ45 plug onto a flat telephone cable and expects reliable gigabit Ethernet performance—this would not demonstrate the specified intervention. The relevant evidence is “A 1000BASE-T test negotiates gigabit with acceptable pair integrity.”.

Question 759

A 130-meter passive copper Ethernet run between switches is unreliable despite normal connectors. Which intervention is best supported by the evidence?

  1. Use the specified RS-232 serial/console lead and supported USB-serial adapter if needed.
  2. Choose a fiber patch lead or approved adapter with matching connector types and polish.
  3. Replace it with correctly rated four-pair twisted-pair Ethernet cable and termination.
  4. Use standards-compliant cable segments with an intermediate active device or fiber path.

Explanation

Correct Answer

D:

Conventional copper Ethernet channel reach is typically limited to around 100 meters. In this situation—A 130-meter passive copper Ethernet run between switches is unreliable despite normal connectors—the right response is “Use standards-compliant cable segments with an intermediate active device or fiber path.”. A confirming result would be “The resulting link operates within supported length and loss limits.”.

Incorrect Answers

A:

RS-232 serial pinouts and signaling differ from ordinary Ethernet data cabling. That does not directly address the condition described—A 130-meter passive copper Ethernet run between switches is unreliable despite normal connectors. “Use standards-compliant cable segments with an intermediate active device or fiber path.” is the appropriate response because conventional copper Ethernet channel reach is typically limited to around 100 meters.

B:

LC and SC are different fiber connector geometries and require compatible mating interfaces. That does not directly address the condition described—A 130-meter passive copper Ethernet run between switches is unreliable despite normal connectors. “Use standards-compliant cable segments with an intermediate active device or fiber path.” is the appropriate response because conventional copper Ethernet channel reach is typically limited to around 100 meters.

C:

Gigabit copper Ethernet requires suitable four-pair cabling rather than ordinary flat telephone cord. That does not directly address the condition described—A 130-meter passive copper Ethernet run between switches is unreliable despite normal connectors. “Use standards-compliant cable segments with an intermediate active device or fiber path.” is the appropriate response because conventional copper Ethernet channel reach is typically limited to around 100 meters.

Question 760

A 130-meter passive copper Ethernet run between switches is unreliable despite normal connectors. Which test outcome demonstrates that the chosen action worked?

  1. The resulting link operates within supported length and loss limits.
  2. Both transceivers establish optical link at expected receive power.
  3. A 1000BASE-T test negotiates gigabit with acceptable pair integrity.
  4. Link errors fall after the cable and shield termination are verified.

Explanation

Correct Answer

A:

Conventional copper Ethernet channel reach is typically limited to around 100 meters. The outcome “The resulting link operates within supported length and loss limits.” verifies the action “Use standards-compliant cable segments with an intermediate active device or fiber path.” for this situation: A 130-meter passive copper Ethernet run between switches is unreliable despite normal connectors.

Incorrect Answers

B:

LC and SC are different fiber connector geometries and require compatible mating interfaces. For the situation described—A 130-meter passive copper Ethernet run between switches is unreliable despite normal connectors—this would not demonstrate the specified intervention. The relevant evidence is “The resulting link operates within supported length and loss limits.”.

C:

Gigabit copper Ethernet requires suitable four-pair cabling rather than ordinary flat telephone cord. For the situation described—A 130-meter passive copper Ethernet run between switches is unreliable despite normal connectors—this would not demonstrate the specified intervention. The relevant evidence is “The resulting link operates within supported length and loss limits.”.

D:

Shielding can mitigate electromagnetic interference when installed correctly. For the situation described—A 130-meter passive copper Ethernet run between switches is unreliable despite normal connectors—this would not demonstrate the specified intervention. The relevant evidence is “The resulting link operates within supported length and loss limits.”.