McAfee-Secured Website

Exam Bundle

Exam Code: 220-1201

Exam Name CompTIA A+ Certification Exam: Core 1

Certification Provider: CompTIA

Corresponding Certification: CompTIA A+

CompTIA 220-1201 Bundle $44.99

100% CompTIA 220-1201 Guaranteed Success With Testking Training Materials

Get Real 220-1201 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    220-1201 Questions & Answers

    527 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 220-1201 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 220-1201 Video Course

    220-1201 Video Course

    106 Video Lectures

    220-1201 Video Course is developed by CompTIA Professionals to help you pass the 220-1201 exam.

    Description

    This course will improve your knowledge and skills required to pass CompTIA A+ Certification Exam: Core 1 exam.
  • Study Guide

    220-1201 Study Guide

    2615 PDF Pages

    Developed by industry experts, this 2615-page guide spells out in painstaking detail all of the information you need to ace 220-1201 exam.

CompTIA A+ Certification Exam: Core 1 (220-1201) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    527 Questions

    $124.99
  • 220-1201 Video Course

    Video Course

    106 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    2615 PDF Pages

    $29.99

CompTIA 220-1201 Practice Test 72

Question 710

A surveillance cabinet has eight PoE cameras drawing 15 W each but the selected switch offers only a 60 W PoE budget. Which test outcome demonstrates that the chosen action worked?

  1. The ONT reports optical link and presents the customer Ethernet handoff.
  2. Compatible optical interfaces establish the uplink at the expected speed.
  3. All eight cameras stay powered during simultaneous infrared activation.
  4. The camera powers up and retains data connectivity.

Explanation

Correct Answer

C:

Power over Ethernet switching must meet both aggregate and individual port budgets. The outcome “All eight cameras stay powered during simultaneous infrared activation.” verifies the action “Choose a PoE switch with sufficient total wattage and per-port standards.” for this situation: A surveillance cabinet has eight PoE cameras drawing 15 W each but the selected switch offers only a 60 W PoE budget.

Incorrect Answers

A:

An ONT converts the provider optical access link to local network service. For the situation described—A surveillance cabinet has eight PoE cameras drawing 15 W each but the selected switch offers only a 60 W PoE budget—this would not demonstrate the specified intervention. The relevant evidence is “All eight cameras stay powered during simultaneous infrared activation.”.

B:

Copper Ethernet connectors cannot directly terminate optical fiber without suitable conversion hardware. For the situation described—A surveillance cabinet has eight PoE cameras drawing 15 W each but the selected switch offers only a 60 W PoE budget—this would not demonstrate the specified intervention. The relevant evidence is “All eight cameras stay powered during simultaneous infrared activation.”.

D:

A PoE injector adds power to an Ethernet link when the switch cannot. For the situation described—A surveillance cabinet has eight PoE cameras drawing 15 W each but the selected switch offers only a 60 W PoE budget—this would not demonstrate the specified intervention. The relevant evidence is “All eight cameras stay powered during simultaneous infrared activation.”.

Question 711

A security gateway must allow stateful traffic inspection before hosts reach the provider uplink. Which action most directly addresses this problem?

  1. Use a suitably sized firewall/security appliance at the routed boundary.
  2. Use a compatible PoE-capable switch port with sufficient power budget.
  3. Select matched 10 Gb/s transceivers and compatible fiber for both ends.
  4. Choose a PoE switch with sufficient total wattage and per-port standards.

Explanation

Correct Answer

A:

A firewall enforces traffic policy and can maintain connection state across a network boundary. In this situation—A security gateway must allow stateful traffic inspection before hosts reach the provider uplink—the right response is “Use a suitably sized firewall/security appliance at the routed boundary.”. A confirming result would be “Denied inbound sessions are blocked and approved outbound sessions establish state.”.

Incorrect Answers

B:

PoE delivers specified electrical power and data over compatible Ethernet cabling. That does not directly address the condition described—A security gateway must allow stateful traffic inspection before hosts reach the provider uplink. “Use a suitably sized firewall/security appliance at the routed boundary.” is the appropriate response because a firewall enforces traffic policy and can maintain connection state across a network boundary.

C:

Transceiver speed, optic type and fiber compatibility must agree at both ends. That does not directly address the condition described—A security gateway must allow stateful traffic inspection before hosts reach the provider uplink. “Use a suitably sized firewall/security appliance at the routed boundary.” is the appropriate response because a firewall enforces traffic policy and can maintain connection state across a network boundary.

D:

Power over Ethernet switching must meet both aggregate and individual port budgets. That does not directly address the condition described—A security gateway must allow stateful traffic inspection before hosts reach the provider uplink. “Use a suitably sized firewall/security appliance at the routed boundary.” is the appropriate response because a firewall enforces traffic policy and can maintain connection state across a network boundary.

Question 712

A security gateway must allow stateful traffic inspection before hosts reach the provider uplink. Which result BEST confirms the problem has been resolved?

  1. Both interfaces report a stable 10 Gb/s optical link within the power budget.
  2. The camera maintains approved connectivity with adequate RF signal and power.
  3. Compatible optical interfaces establish the uplink at the expected speed.
  4. Denied inbound sessions are blocked and approved outbound sessions establish state.

Explanation

Correct Answer

D:

A firewall enforces traffic policy and can maintain connection state across a network boundary. The outcome “Denied inbound sessions are blocked and approved outbound sessions establish state.” verifies the action “Use a suitably sized firewall/security appliance at the routed boundary.” for this situation: A security gateway must allow stateful traffic inspection before hosts reach the provider uplink.

Incorrect Answers

A:

Transceiver speed, optic type and fiber compatibility must agree at both ends. For the situation described—A security gateway must allow stateful traffic inspection before hosts reach the provider uplink—this would not demonstrate the specified intervention. The relevant evidence is “Denied inbound sessions are blocked and approved outbound sessions establish state.”.

B:

A wireless bridge can extend connectivity to a remote endpoint where a copper run is impractical. For the situation described—A security gateway must allow stateful traffic inspection before hosts reach the provider uplink—this would not demonstrate the specified intervention. The relevant evidence is “Denied inbound sessions are blocked and approved outbound sessions establish state.”.

C:

Copper Ethernet connectors cannot directly terminate optical fiber without suitable conversion hardware. For the situation described—A security gateway must allow stateful traffic inspection before hosts reach the provider uplink—this would not demonstrate the specified intervention. The relevant evidence is “Denied inbound sessions are blocked and approved outbound sessions establish state.”.

Question 713

Two network racks require a 10 Gb/s short optical link but the technician purchased a 1 Gb/s-only transceiver. What is the MOST appropriate technician response?

  1. Select matched 10 Gb/s transceivers and compatible fiber for both ends.
  2. Install a supported fiber-capable module, transceiver or media-conversion path.
  3. Use a compatible PoE-capable switch port with sufficient power budget.
  4. Use a suitably sized firewall/security appliance at the routed boundary.

Explanation

Correct Answer

A:

Transceiver speed, optic type and fiber compatibility must agree at both ends. In this situation—Two network racks require a 10 Gb/s short optical link but the technician purchased a 1 Gb/s-only transceiver—the right response is “Select matched 10 Gb/s transceivers and compatible fiber for both ends.”. A confirming result would be “Both interfaces report a stable 10 Gb/s optical link within the power budget.”.

Incorrect Answers

B:

Copper Ethernet connectors cannot directly terminate optical fiber without suitable conversion hardware. That does not directly address the condition described—Two network racks require a 10 Gb/s short optical link but the technician purchased a 1 Gb/s-only transceiver. “Select matched 10 Gb/s transceivers and compatible fiber for both ends.” is the appropriate response because transceiver speed, optic type and fiber compatibility must agree at both ends.

C:

PoE delivers specified electrical power and data over compatible Ethernet cabling. That does not directly address the condition described—Two network racks require a 10 Gb/s short optical link but the technician purchased a 1 Gb/s-only transceiver. “Select matched 10 Gb/s transceivers and compatible fiber for both ends.” is the appropriate response because transceiver speed, optic type and fiber compatibility must agree at both ends.

D:

A firewall enforces traffic policy and can maintain connection state across a network boundary. That does not directly address the condition described—Two network racks require a 10 Gb/s short optical link but the technician purchased a 1 Gb/s-only transceiver. “Select matched 10 Gb/s transceivers and compatible fiber for both ends.” is the appropriate response because transceiver speed, optic type and fiber compatibility must agree at both ends.

Question 714

Two network racks require a 10 Gb/s short optical link but the technician purchased a 1 Gb/s-only transceiver. Which observation directly verifies a successful repair?

  1. Compatible optical interfaces establish the uplink at the expected speed.
  2. Both interfaces report a stable 10 Gb/s optical link within the power budget.
  3. The camera maintains approved connectivity with adequate RF signal and power.
  4. The ONT reports optical link and presents the customer Ethernet handoff.

Explanation

Correct Answer

B:

Transceiver speed, optic type and fiber compatibility must agree at both ends. The outcome “Both interfaces report a stable 10 Gb/s optical link within the power budget.” verifies the action “Select matched 10 Gb/s transceivers and compatible fiber for both ends.” for this situation: Two network racks require a 10 Gb/s short optical link but the technician purchased a 1 Gb/s-only transceiver.

Incorrect Answers

A:

Copper Ethernet connectors cannot directly terminate optical fiber without suitable conversion hardware. For the situation described—Two network racks require a 10 Gb/s short optical link but the technician purchased a 1 Gb/s-only transceiver—this would not demonstrate the specified intervention. The relevant evidence is “Both interfaces report a stable 10 Gb/s optical link within the power budget.”.

C:

A wireless bridge can extend connectivity to a remote endpoint where a copper run is impractical. For the situation described—Two network racks require a 10 Gb/s short optical link but the technician purchased a 1 Gb/s-only transceiver—this would not demonstrate the specified intervention. The relevant evidence is “Both interfaces report a stable 10 Gb/s optical link within the power budget.”.

D:

An ONT converts the provider optical access link to local network service. For the situation described—Two network racks require a 10 Gb/s short optical link but the technician purchased a 1 Gb/s-only transceiver—this would not demonstrate the specified intervention. The relevant evidence is “Both interfaces report a stable 10 Gb/s optical link within the power budget.”.

Question 715

An outdoor wireless camera is beyond one Ethernet cable run and must connect to the building WLAN. Which change best satisfies the stated requirement?

  1. Use a compatible PoE-capable switch port with sufficient power budget.
  2. Use a supported outdoor wireless bridge or properly engineered AP connection.
  3. Install a supported fiber-capable module, transceiver or media-conversion path.
  4. Choose a PoE switch with sufficient total wattage and per-port standards.

Explanation

Correct Answer

B:

A wireless bridge can extend connectivity to a remote endpoint where a copper run is impractical. In this situation—An outdoor wireless camera is beyond one Ethernet cable run and must connect to the building WLAN—the right response is “Use a supported outdoor wireless bridge or properly engineered AP connection.”. A confirming result would be “The camera maintains approved connectivity with adequate RF signal and power.”.

Incorrect Answers

A:

PoE delivers specified electrical power and data over compatible Ethernet cabling. That does not directly address the condition described—An outdoor wireless camera is beyond one Ethernet cable run and must connect to the building WLAN. “Use a supported outdoor wireless bridge or properly engineered AP connection.” is the appropriate response because a wireless bridge can extend connectivity to a remote endpoint where a copper run is impractical.

C:

Copper Ethernet connectors cannot directly terminate optical fiber without suitable conversion hardware. That does not directly address the condition described—An outdoor wireless camera is beyond one Ethernet cable run and must connect to the building WLAN. “Use a supported outdoor wireless bridge or properly engineered AP connection.” is the appropriate response because a wireless bridge can extend connectivity to a remote endpoint where a copper run is impractical.

D:

Power over Ethernet switching must meet both aggregate and individual port budgets. That does not directly address the condition described—An outdoor wireless camera is beyond one Ethernet cable run and must connect to the building WLAN. “Use a supported outdoor wireless bridge or properly engineered AP connection.” is the appropriate response because a wireless bridge can extend connectivity to a remote endpoint where a copper run is impractical.

Question 716

An outdoor wireless camera is beyond one Ethernet cable run and must connect to the building WLAN. What evidence shows that the intended requirement has been met?

  1. Both interfaces report a stable 10 Gb/s optical link within the power budget.
  2. The camera maintains approved connectivity with adequate RF signal and power.
  3. Hosts reach off-subnet destinations through the configured default route.
  4. Compatible optical interfaces establish the uplink at the expected speed.

Explanation

Correct Answer

B:

A wireless bridge can extend connectivity to a remote endpoint where a copper run is impractical. The outcome “The camera maintains approved connectivity with adequate RF signal and power.” verifies the action “Use a supported outdoor wireless bridge or properly engineered AP connection.” for this situation: An outdoor wireless camera is beyond one Ethernet cable run and must connect to the building WLAN.

Incorrect Answers

A:

Transceiver speed, optic type and fiber compatibility must agree at both ends. For the situation described—An outdoor wireless camera is beyond one Ethernet cable run and must connect to the building WLAN—this would not demonstrate the specified intervention. The relevant evidence is “The camera maintains approved connectivity with adequate RF signal and power.”.

C:

Routers connect IP networks and select next hops. For the situation described—An outdoor wireless camera is beyond one Ethernet cable run and must connect to the building WLAN—this would not demonstrate the specified intervention. The relevant evidence is “The camera maintains approved connectivity with adequate RF signal and power.”.

D:

Copper Ethernet connectors cannot directly terminate optical fiber without suitable conversion hardware. For the situation described—An outdoor wireless camera is beyond one Ethernet cable run and must connect to the building WLAN—this would not demonstrate the specified intervention. The relevant evidence is “The camera maintains approved connectivity with adequate RF signal and power.”.

Question 717

A server is configured as 10.14.9.130/26 and an operator assumes its local subnet begins at .0. What should the technician configure or repair to resolve this issue?

  1. Assign an appropriate address in the printer's real network with correct routing.
  2. Use the 10.14.9.128/26 network and its valid host range when assigning peers.
  3. Remove the duplicate assignment and give both devices unique approved addresses.
  4. Set a reachable internal resolver address supplied by network policy.

Explanation

Correct Answer

B:

A /26 subnet has blocks of 64 addresses and the range containing .130 begins at .128. In this situation—A server is configured as 10.14.9.130/26 and an operator assumes its local subnet begins at .0—the right response is “Use the 10.14.9.128/26 network and its valid host range when assigning peers.”. A confirming result would be “Hosts within 10.14.9.129–190 communicate on-link without an incorrect gateway hop.”.

Incorrect Answers

A:

A mismatched IP network prevents normal same-subnet communication. That does not directly address the condition described—A server is configured as 10.14.9.130/26 and an operator assumes its local subnet begins at .0. “Use the 10.14.9.128/26 network and its valid host range when assigning peers.” is the appropriate response because a /26 subnet has blocks of 64 addresses and the range containing .130 begins at .128.

C:

Address collisions cause intermittent neighbor cache and delivery failures. That does not directly address the condition described—A server is configured as 10.14.9.130/26 and an operator assumes its local subnet begins at .0. “Use the 10.14.9.128/26 network and its valid host range when assigning peers.” is the appropriate response because a /26 subnet has blocks of 64 addresses and the range containing .130 begins at .128.

D:

127.0.0.1 is the host itself and is not a remote DNS server. That does not directly address the condition described—A server is configured as 10.14.9.130/26 and an operator assumes its local subnet begins at .0. “Use the 10.14.9.128/26 network and its valid host range when assigning peers.” is the appropriate response because a /26 subnet has blocks of 64 addresses and the range containing .130 begins at .128.

Question 718

A server is configured as 10.14.9.130/26 and an operator assumes its local subnet begins at .0. How should the technician verify the corrective change?

  1. Hosts within 10.14.9.129–190 communicate on-link without an incorrect gateway hop.
  2. A traceroute's first hop is the intended gateway and remote traffic succeeds.
  3. Hostname resolution succeeds using the authorized resolver rather than local loopback.
  4. The host sends remote-subnet traffic to the gateway rather than ARPing for it.

Explanation

Correct Answer

A:

A /26 subnet has blocks of 64 addresses and the range containing .130 begins at .128. The outcome “Hosts within 10.14.9.129–190 communicate on-link without an incorrect gateway hop.” verifies the action “Use the 10.14.9.128/26 network and its valid host range when assigning peers.” for this situation: A server is configured as 10.14.9.130/26 and an operator assumes its local subnet begins at .0.

Incorrect Answers

B:

Off-subnet IP traffic requires a gateway route. For the situation described—A server is configured as 10.14.9.130/26 and an operator assumes its local subnet begins at .0—this would not demonstrate the specified intervention. The relevant evidence is “Hosts within 10.14.9.129–190 communicate on-link without an incorrect gateway hop.”.

C:

127.0.0.1 is the host itself and is not a remote DNS server. For the situation described—A server is configured as 10.14.9.130/26 and an operator assumes its local subnet begins at .0—this would not demonstrate the specified intervention. The relevant evidence is “Hosts within 10.14.9.129–190 communicate on-link without an incorrect gateway hop.”.

D:

An incorrect mask changes which destinations are considered local. For the situation described—A server is configured as 10.14.9.130/26 and an operator assumes its local subnet begins at .0—this would not demonstrate the specified intervention. The relevant evidence is “Hosts within 10.14.9.129–190 communicate on-link without an incorrect gateway hop.”.

Question 719

A workstation has address 192.168.77.20/24 but gateway 192.168.78.1, which is unreachable directly. Which intervention is best supported by the evidence?

  1. Assign a gateway reachable in the workstation's own routed 192.168.77.0/24 subnet.
  2. Configure a routable IPv6 address/prefix and correct gateway routing where supported.
  3. Select the correct routed global unicast prefix for publicly reachable IPv6 services.
  4. Assign an appropriate address in the printer's real network with correct routing.

Explanation

Correct Answer

A:

A typical default gateway must be directly reachable on the local IP segment. In this situation—A workstation has address 192.168.77.20/24 but gateway 192.168.78.1, which is unreachable directly—the right response is “Assign a gateway reachable in the workstation's own routed 192.168.77.0/24 subnet.”. A confirming result would be “The client ARPs for the correct gateway and reaches remote networks.”.

Incorrect Answers

B:

IPv6 link-local addresses are not routed beyond the local link. That does not directly address the condition described—A workstation has address 192.168.77.20/24 but gateway 192.168.78.1, which is unreachable directly. “Assign a gateway reachable in the workstation's own routed 192.168.77.0/24 subnet.” is the appropriate response because a typical default gateway must be directly reachable on the local IP segment.

C:

IPv6 unique local addresses serve private routing domains rather than direct public Internet reachability. That does not directly address the condition described—A workstation has address 192.168.77.20/24 but gateway 192.168.78.1, which is unreachable directly. “Assign a gateway reachable in the workstation's own routed 192.168.77.0/24 subnet.” is the appropriate response because a typical default gateway must be directly reachable on the local IP segment.

D:

A mismatched IP network prevents normal same-subnet communication. That does not directly address the condition described—A workstation has address 192.168.77.20/24 but gateway 192.168.78.1, which is unreachable directly. “Assign a gateway reachable in the workstation's own routed 192.168.77.0/24 subnet.” is the appropriate response because a typical default gateway must be directly reachable on the local IP segment.

Question 720

A workstation has address 192.168.77.20/24 but gateway 192.168.78.1, which is unreachable directly. Which test outcome demonstrates that the chosen action worked?

  1. The AP management plane reaches its controller from the proper subnet.
  2. A traceroute's first hop is the intended gateway and remote traffic succeeds.
  3. The client ARPs for the correct gateway and reaches remote networks.
  4. A branch workstation can contact the printer at its intended address.

Explanation

Correct Answer

C:

A typical default gateway must be directly reachable on the local IP segment. The outcome “The client ARPs for the correct gateway and reaches remote networks.” verifies the action “Assign a gateway reachable in the workstation's own routed 192.168.77.0/24 subnet.” for this situation: A workstation has address 192.168.77.20/24 but gateway 192.168.78.1, which is unreachable directly.

Incorrect Answers

A:

Gateway selection must match the actual management subnet and route. For the situation described—A workstation has address 192.168.77.20/24 but gateway 192.168.78.1, which is unreachable directly—this would not demonstrate the specified intervention. The relevant evidence is “The client ARPs for the correct gateway and reaches remote networks.”.

B:

Off-subnet IP traffic requires a gateway route. For the situation described—A workstation has address 192.168.77.20/24 but gateway 192.168.78.1, which is unreachable directly—this would not demonstrate the specified intervention. The relevant evidence is “The client ARPs for the correct gateway and reaches remote networks.”.

D:

A mismatched IP network prevents normal same-subnet communication. For the situation described—A workstation has address 192.168.77.20/24 but gateway 192.168.78.1, which is unreachable directly—this would not demonstrate the specified intervention. The relevant evidence is “The client ARPs for the correct gateway and reaches remote networks.”.