McAfee-Secured Website

Exam Bundle

Exam Code: 220-1201

Exam Name CompTIA A+ Certification Exam: Core 1

Certification Provider: CompTIA

Corresponding Certification: CompTIA A+

CompTIA 220-1201 Bundle $44.99

100% CompTIA 220-1201 Guaranteed Success With Testking Training Materials

Get Real 220-1201 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    220-1201 Questions & Answers

    527 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 220-1201 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 220-1201 Video Course

    220-1201 Video Course

    106 Video Lectures

    220-1201 Video Course is developed by CompTIA Professionals to help you pass the 220-1201 exam.

    Description

    This course will improve your knowledge and skills required to pass CompTIA A+ Certification Exam: Core 1 exam.
  • Study Guide

    220-1201 Study Guide

    2615 PDF Pages

    Developed by industry experts, this 2615-page guide spells out in painstaking detail all of the information you need to ace 220-1201 exam.

CompTIA A+ Certification Exam: Core 1 (220-1201) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    527 Questions

    $124.99
  • 220-1201 Video Course

    Video Course

    106 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    2615 PDF Pages

    $29.99

CompTIA 220-1201 Practice Test 71

Question 700

An employee's VPN sends internal corporate traffic through the tunnel but should use the local Internet gateway for public websites under policy. Which test outcome demonstrates that the chosen action worked?

  1. A client using the approved MAC receives the reserved IP after a fresh lease request.
  2. Allowed cross-VLAN flows succeed while unauthorized destinations remain blocked.
  3. Internal resources use the VPN route while approved public destinations follow local Internet routing.
  4. A fresh signed test email passes DKIM verification at an independent receiver.

Explanation

Correct Answer

C:

Split tunneling sends selected routes through a VPN while other traffic bypasses it. The outcome “Internal resources use the VPN route while approved public destinations follow local Internet routing.” verifies the action “Configure the approved split-tunnel routes and security exclusions.” for this situation: An employee's VPN sends internal corporate traffic through the tunnel but should use the local Internet gateway for public websites under policy.

Incorrect Answers

A:

A DHCP reservation fixes the address assignment policy while keeping the device DHCP-managed. For the situation described—An employee's VPN sends internal corporate traffic through the tunnel but should use the local Internet gateway for public websites under policy—this would not demonstrate the specified intervention. The relevant evidence is “Internal resources use the VPN route while approved public destinations follow local Internet routing.”.

B:

VLAN separation is at layer 2; cross-VLAN traffic requires layer-3 forwarding and policy controls. For the situation described—An employee's VPN sends internal corporate traffic through the tunnel but should use the local Internet gateway for public websites under policy—this would not demonstrate the specified intervention. The relevant evidence is “Internal resources use the VPN route while approved public destinations follow local Internet routing.”.

D:

DKIM validation requires a DNS public key matching the private key that signed the message. For the situation described—An employee's VPN sends internal corporate traffic through the tunnel but should use the local Internet gateway for public websites under policy—this would not demonstrate the specified intervention. The relevant evidence is “Internal resources use the VPN route while approved public destinations follow local Internet routing.”.

Question 701

A new server must keep a particular address, but technicians cannot manually manage its network configuration after replacements. Which action most directly addresses this problem?

  1. Create a MAC-based DHCP reservation under the infrastructure scope.
  2. Add an exclusion for infrastructure addresses inside the DHCP scope.
  3. Configure the approved split-tunnel routes and security exclusions.
  4. Create or correct the relevant PTR record in the reverse DNS zone.

Explanation

Correct Answer

A:

A DHCP reservation fixes the address assignment policy while keeping the device DHCP-managed. In this situation—A new server must keep a particular address, but technicians cannot manually manage its network configuration after replacements—the right response is “Create a MAC-based DHCP reservation under the infrastructure scope.”. A confirming result would be “A client using the approved MAC receives the reserved IP after a fresh lease request.”.

Incorrect Answers

B:

DHCP exclusions prevent dynamic clients from leasing reserved static ranges. That does not directly address the condition described—A new server must keep a particular address, but technicians cannot manually manage its network configuration after replacements. “Create a MAC-based DHCP reservation under the infrastructure scope.” is the appropriate response because a DHCP reservation fixes the address assignment policy while keeping the device DHCP-managed.

C:

Split tunneling sends selected routes through a VPN while other traffic bypasses it. That does not directly address the condition described—A new server must keep a particular address, but technicians cannot manually manage its network configuration after replacements. “Create a MAC-based DHCP reservation under the infrastructure scope.” is the appropriate response because a DHCP reservation fixes the address assignment policy while keeping the device DHCP-managed.

D:

PTR records associate an address with a hostname in reverse-lookup DNS zones. That does not directly address the condition described—A new server must keep a particular address, but technicians cannot manually manage its network configuration after replacements. “Create a MAC-based DHCP reservation under the infrastructure scope.” is the appropriate response because a DHCP reservation fixes the address assignment policy while keeping the device DHCP-managed.

Question 702

A new server must keep a particular address, but technicians cannot manually manage its network configuration after replacements. Which result BEST confirms the problem has been resolved?

  1. Allowed cross-VLAN flows succeed while unauthorized destinations remain blocked.
  2. A client using the approved MAC receives the reserved IP after a fresh lease request.
  3. A fresh signed test email passes DKIM verification at an independent receiver.
  4. A mail authentication report shows the requested aligned-domain disposition.

Explanation

Correct Answer

B:

A DHCP reservation fixes the address assignment policy while keeping the device DHCP-managed. The outcome “A client using the approved MAC receives the reserved IP after a fresh lease request.” verifies the action “Create a MAC-based DHCP reservation under the infrastructure scope.” for this situation: A new server must keep a particular address, but technicians cannot manually manage its network configuration after replacements.

Incorrect Answers

A:

VLAN separation is at layer 2; cross-VLAN traffic requires layer-3 forwarding and policy controls. For the situation described—A new server must keep a particular address, but technicians cannot manually manage its network configuration after replacements—this would not demonstrate the specified intervention. The relevant evidence is “A client using the approved MAC receives the reserved IP after a fresh lease request.”.

C:

DKIM validation requires a DNS public key matching the private key that signed the message. For the situation described—A new server must keep a particular address, but technicians cannot manually manage its network configuration after replacements—this would not demonstrate the specified intervention. The relevant evidence is “A client using the approved MAC receives the reserved IP after a fresh lease request.”.

D:

DMARC applies alignment and reporting to SPF/DKIM outcomes. For the situation described—A new server must keep a particular address, but technicians cannot manually manage its network configuration after replacements—this would not demonstrate the specified intervention. The relevant evidence is “A client using the approved MAC receives the reserved IP after a fresh lease request.”.

Question 703

Two departments require routing between separate VLANs with a firewall policy restricting permitted destinations. What is the MOST appropriate technician response?

  1. Configure authorized inter-VLAN routing on the gateway and enforce the required ACLs.
  2. Configure a supported IEEE 802.1Q trunk with only approved VLANs allowed.
  3. Configure the approved split-tunnel routes and security exclusions.
  4. Publish the current DKIM selector public key and align it with the active mail signer.

Explanation

Correct Answer

A:

VLAN separation is at layer 2; cross-VLAN traffic requires layer-3 forwarding and policy controls. In this situation—Two departments require routing between separate VLANs with a firewall policy restricting permitted destinations—the right response is “Configure authorized inter-VLAN routing on the gateway and enforce the required ACLs.”. A confirming result would be “Allowed cross-VLAN flows succeed while unauthorized destinations remain blocked.”.

Incorrect Answers

B:

802.1Q trunking transports multiple layer-2 VLANs over one physical link. That does not directly address the condition described—Two departments require routing between separate VLANs with a firewall policy restricting permitted destinations. “Configure authorized inter-VLAN routing on the gateway and enforce the required ACLs.” is the appropriate response because vLAN separation is at layer 2; cross-VLAN traffic requires layer-3 forwarding and policy controls.

C:

Split tunneling sends selected routes through a VPN while other traffic bypasses it. That does not directly address the condition described—Two departments require routing between separate VLANs with a firewall policy restricting permitted destinations. “Configure authorized inter-VLAN routing on the gateway and enforce the required ACLs.” is the appropriate response because vLAN separation is at layer 2; cross-VLAN traffic requires layer-3 forwarding and policy controls.

D:

DKIM validation requires a DNS public key matching the private key that signed the message. That does not directly address the condition described—Two departments require routing between separate VLANs with a firewall policy restricting permitted destinations. “Configure authorized inter-VLAN routing on the gateway and enforce the required ACLs.” is the appropriate response because vLAN separation is at layer 2; cross-VLAN traffic requires layer-3 forwarding and policy controls.

Question 704

Two departments require routing between separate VLANs with a firewall policy restricting permitted destinations. Which observation directly verifies a successful repair?

  1. A mail authentication report shows the requested aligned-domain disposition.
  2. A broadcast on one VLAN does not reach the other without routing.
  3. Allowed cross-VLAN flows succeed while unauthorized destinations remain blocked.
  4. A fresh signed test email passes DKIM verification at an independent receiver.

Explanation

Correct Answer

C:

VLAN separation is at layer 2; cross-VLAN traffic requires layer-3 forwarding and policy controls. The outcome “Allowed cross-VLAN flows succeed while unauthorized destinations remain blocked.” verifies the action “Configure authorized inter-VLAN routing on the gateway and enforce the required ACLs.” for this situation: Two departments require routing between separate VLANs with a firewall policy restricting permitted destinations.

Incorrect Answers

A:

DMARC applies alignment and reporting to SPF/DKIM outcomes. For the situation described—Two departments require routing between separate VLANs with a firewall policy restricting permitted destinations—this would not demonstrate the specified intervention. The relevant evidence is “Allowed cross-VLAN flows succeed while unauthorized destinations remain blocked.”.

B:

VLANs isolate layer-2 broadcast domains on shared switch hardware. For the situation described—Two departments require routing between separate VLANs with a firewall policy restricting permitted destinations—this would not demonstrate the specified intervention. The relevant evidence is “Allowed cross-VLAN flows succeed while unauthorized destinations remain blocked.”.

D:

DKIM validation requires a DNS public key matching the private key that signed the message. For the situation described—Two departments require routing between separate VLANs with a firewall policy restricting permitted destinations—this would not demonstrate the specified intervention. The relevant evidence is “Allowed cross-VLAN flows succeed while unauthorized destinations remain blocked.”.

Question 705

A network installer needs to separate voice and user data VLANs but the existing unmanaged switch cannot set port membership. Which change best satisfies the stated requirement?

  1. Install the provider-approved optical network terminal.
  2. Install a router with appropriate WAN and LAN interfaces.
  3. Use a compatible cable modem for the coaxial provider handoff.
  4. Install a managed switch with supported 802.1Q VLAN features.

Explanation

Correct Answer

D:

Unmanaged switches generally lack configurable enterprise VLAN membership controls. In this situation—A network installer needs to separate voice and user data VLANs but the existing unmanaged switch cannot set port membership—the right response is “Install a managed switch with supported 802.1Q VLAN features.”. A confirming result would be “Ports enforce the intended VLAN memberships and tagging rules.”.

Incorrect Answers

A:

An ONT converts the provider optical access link to local network service. That does not directly address the condition described—A network installer needs to separate voice and user data VLANs but the existing unmanaged switch cannot set port membership. “Install a managed switch with supported 802.1Q VLAN features.” is the appropriate response because unmanaged switches generally lack configurable enterprise VLAN membership controls.

B:

Routers connect IP networks and select next hops. That does not directly address the condition described—A network installer needs to separate voice and user data VLANs but the existing unmanaged switch cannot set port membership. “Install a managed switch with supported 802.1Q VLAN features.” is the appropriate response because unmanaged switches generally lack configurable enterprise VLAN membership controls.

C:

A cable modem terminates coax DOCSIS; an ONT terminates optical access. That does not directly address the condition described—A network installer needs to separate voice and user data VLANs but the existing unmanaged switch cannot set port membership. “Install a managed switch with supported 802.1Q VLAN features.” is the appropriate response because unmanaged switches generally lack configurable enterprise VLAN membership controls.

Question 706

A network installer needs to separate voice and user data VLANs but the existing unmanaged switch cannot set port membership. What evidence shows that the intended requirement has been met?

  1. A label and cable trace identify each outlet at its patch port.
  2. The camera negotiates PoE power and appears on the network.
  3. All desktops negotiate link and exchange frames on the LAN.
  4. Ports enforce the intended VLAN memberships and tagging rules.

Explanation

Correct Answer

D:

Unmanaged switches generally lack configurable enterprise VLAN membership controls. The outcome “Ports enforce the intended VLAN memberships and tagging rules.” verifies the action “Install a managed switch with supported 802.1Q VLAN features.” for this situation: A network installer needs to separate voice and user data VLANs but the existing unmanaged switch cannot set port membership.

Incorrect Answers

A:

Patch panels organize passive terminations rather than switch packets. For the situation described—A network installer needs to separate voice and user data VLANs but the existing unmanaged switch cannot set port membership—this would not demonstrate the specified intervention. The relevant evidence is “Ports enforce the intended VLAN memberships and tagging rules.”.

B:

PoE delivers specified electrical power and data over compatible Ethernet cabling. For the situation described—A network installer needs to separate voice and user data VLANs but the existing unmanaged switch cannot set port membership—this would not demonstrate the specified intervention. The relevant evidence is “Ports enforce the intended VLAN memberships and tagging rules.”.

C:

A switch aggregates local layer-2 Ethernet links. For the situation described—A network installer needs to separate voice and user data VLANs but the existing unmanaged switch cannot set port membership—this would not demonstrate the specified intervention. The relevant evidence is “Ports enforce the intended VLAN memberships and tagging rules.”.

Question 707

A fiber uplink is dark because the new switch has only copper RJ45 ports and no fiber capability. What should the technician configure or repair to resolve this issue?

  1. Use a compatible PoE-capable switch port with sufficient power budget.
  2. Install a supported fiber-capable module, transceiver or media-conversion path.
  3. Select matched 10 Gb/s transceivers and compatible fiber for both ends.
  4. Use a supported outdoor wireless bridge or properly engineered AP connection.

Explanation

Correct Answer

B:

Copper Ethernet connectors cannot directly terminate optical fiber without suitable conversion hardware. In this situation—A fiber uplink is dark because the new switch has only copper RJ45 ports and no fiber capability—the right response is “Install a supported fiber-capable module, transceiver or media-conversion path.”. A confirming result would be “Compatible optical interfaces establish the uplink at the expected speed.”.

Incorrect Answers

A:

PoE delivers specified electrical power and data over compatible Ethernet cabling. That does not directly address the condition described—A fiber uplink is dark because the new switch has only copper RJ45 ports and no fiber capability. “Install a supported fiber-capable module, transceiver or media-conversion path.” is the appropriate response because copper Ethernet connectors cannot directly terminate optical fiber without suitable conversion hardware.

C:

Transceiver speed, optic type and fiber compatibility must agree at both ends. That does not directly address the condition described—A fiber uplink is dark because the new switch has only copper RJ45 ports and no fiber capability. “Install a supported fiber-capable module, transceiver or media-conversion path.” is the appropriate response because copper Ethernet connectors cannot directly terminate optical fiber without suitable conversion hardware.

D:

A wireless bridge can extend connectivity to a remote endpoint where a copper run is impractical. That does not directly address the condition described—A fiber uplink is dark because the new switch has only copper RJ45 ports and no fiber capability. “Install a supported fiber-capable module, transceiver or media-conversion path.” is the appropriate response because copper Ethernet connectors cannot directly terminate optical fiber without suitable conversion hardware.

Question 708

A fiber uplink is dark because the new switch has only copper RJ45 ports and no fiber capability. How should the technician verify the corrective change?

  1. The ONT reports optical link and presents the customer Ethernet handoff.
  2. Compatible optical interfaces establish the uplink at the expected speed.
  3. Both interfaces report a stable 10 Gb/s optical link within the power budget.
  4. Hosts reach off-subnet destinations through the configured default route.

Explanation

Correct Answer

B:

Copper Ethernet connectors cannot directly terminate optical fiber without suitable conversion hardware. The outcome “Compatible optical interfaces establish the uplink at the expected speed.” verifies the action “Install a supported fiber-capable module, transceiver or media-conversion path.” for this situation: A fiber uplink is dark because the new switch has only copper RJ45 ports and no fiber capability.

Incorrect Answers

A:

An ONT converts the provider optical access link to local network service. For the situation described—A fiber uplink is dark because the new switch has only copper RJ45 ports and no fiber capability—this would not demonstrate the specified intervention. The relevant evidence is “Compatible optical interfaces establish the uplink at the expected speed.”.

C:

Transceiver speed, optic type and fiber compatibility must agree at both ends. For the situation described—A fiber uplink is dark because the new switch has only copper RJ45 ports and no fiber capability—this would not demonstrate the specified intervention. The relevant evidence is “Compatible optical interfaces establish the uplink at the expected speed.”.

D:

Routers connect IP networks and select next hops. For the situation described—A fiber uplink is dark because the new switch has only copper RJ45 ports and no fiber capability—this would not demonstrate the specified intervention. The relevant evidence is “Compatible optical interfaces establish the uplink at the expected speed.”.

Question 709

A surveillance cabinet has eight PoE cameras drawing 15 W each but the selected switch offers only a 60 W PoE budget. Which intervention is best supported by the evidence?

  1. Select matched 10 Gb/s transceivers and compatible fiber for both ends.
  2. Use a suitably sized firewall/security appliance at the routed boundary.
  3. Add a correctly rated PoE injector on that cable run.
  4. Choose a PoE switch with sufficient total wattage and per-port standards.

Explanation

Correct Answer

D:

Power over Ethernet switching must meet both aggregate and individual port budgets. In this situation—A surveillance cabinet has eight PoE cameras drawing 15 W each but the selected switch offers only a 60 W PoE budget—the right response is “Choose a PoE switch with sufficient total wattage and per-port standards.”. A confirming result would be “All eight cameras stay powered during simultaneous infrared activation.”.

Incorrect Answers

A:

Transceiver speed, optic type and fiber compatibility must agree at both ends. That does not directly address the condition described—A surveillance cabinet has eight PoE cameras drawing 15 W each but the selected switch offers only a 60 W PoE budget. “Choose a PoE switch with sufficient total wattage and per-port standards.” is the appropriate response because power over Ethernet switching must meet both aggregate and individual port budgets.

B:

A firewall enforces traffic policy and can maintain connection state across a network boundary. That does not directly address the condition described—A surveillance cabinet has eight PoE cameras drawing 15 W each but the selected switch offers only a 60 W PoE budget. “Choose a PoE switch with sufficient total wattage and per-port standards.” is the appropriate response because power over Ethernet switching must meet both aggregate and individual port budgets.

C:

A PoE injector adds power to an Ethernet link when the switch cannot. That does not directly address the condition described—A surveillance cabinet has eight PoE cameras drawing 15 W each but the selected switch offers only a 60 W PoE budget. “Choose a PoE switch with sufficient total wattage and per-port standards.” is the appropriate response because power over Ethernet switching must meet both aggregate and individual port budgets.

Question 710

A surveillance cabinet has eight PoE cameras drawing 15 W each but the selected switch offers only a 60 W PoE budget. Which test outcome demonstrates that the chosen action worked?

  1. The ONT reports optical link and presents the customer Ethernet handoff.
  2. Compatible optical interfaces establish the uplink at the expected speed.
  3. All eight cameras stay powered during simultaneous infrared activation.
  4. The camera powers up and retains data connectivity.

Explanation

Correct Answer

C:

Power over Ethernet switching must meet both aggregate and individual port budgets. The outcome “All eight cameras stay powered during simultaneous infrared activation.” verifies the action “Choose a PoE switch with sufficient total wattage and per-port standards.” for this situation: A surveillance cabinet has eight PoE cameras drawing 15 W each but the selected switch offers only a 60 W PoE budget.

Incorrect Answers

A:

An ONT converts the provider optical access link to local network service. For the situation described—A surveillance cabinet has eight PoE cameras drawing 15 W each but the selected switch offers only a 60 W PoE budget—this would not demonstrate the specified intervention. The relevant evidence is “All eight cameras stay powered during simultaneous infrared activation.”.

B:

Copper Ethernet connectors cannot directly terminate optical fiber without suitable conversion hardware. For the situation described—A surveillance cabinet has eight PoE cameras drawing 15 W each but the selected switch offers only a 60 W PoE budget—this would not demonstrate the specified intervention. The relevant evidence is “All eight cameras stay powered during simultaneous infrared activation.”.

D:

A PoE injector adds power to an Ethernet link when the switch cannot. For the situation described—A surveillance cabinet has eight PoE cameras drawing 15 W each but the selected switch offers only a 60 W PoE budget—this would not demonstrate the specified intervention. The relevant evidence is “All eight cameras stay powered during simultaneous infrared activation.”.