McAfee-Secured Website

Exam Bundle

Exam Code: 220-1201

Exam Name CompTIA A+ Certification Exam: Core 1

Certification Provider: CompTIA

Corresponding Certification: CompTIA A+

CompTIA 220-1201 Bundle $44.99

100% CompTIA 220-1201 Guaranteed Success With Testking Training Materials

Get Real 220-1201 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    220-1201 Questions & Answers

    527 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 220-1201 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 220-1201 Video Course

    220-1201 Video Course

    106 Video Lectures

    220-1201 Video Course is developed by CompTIA Professionals to help you pass the 220-1201 exam.

    Description

    This course will improve your knowledge and skills required to pass CompTIA A+ Certification Exam: Core 1 exam.
  • Study Guide

    220-1201 Study Guide

    2615 PDF Pages

    Developed by industry experts, this 2615-page guide spells out in painstaking detail all of the information you need to ace 220-1201 exam.

CompTIA A+ Certification Exam: Core 1 (220-1201) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    527 Questions

    $124.99
  • 220-1201 Video Course

    Video Course

    106 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    2615 PDF Pages

    $29.99

CompTIA 220-1201 Practice Test 67

Question 660

A remote file exchange must copy files over an encrypted channel and the available appliance supports SFTP but not FTPS. Which test outcome demonstrates that the chosen action worked?

  1. A transfer completes over an authenticated SSH session without clear-text file credentials.
  2. The mail client submits a message through authenticated SMTP and it reaches the outbound queue.
  3. The monitoring console receives fresh interface counters using approved SNMP credentials.
  4. A packet inspection shows encrypted SSH management without Telnet credentials.

Explanation

Correct Answer

A:

SFTP uses the SSH transport and is not the same protocol as FTP with TLS. The outcome “A transfer completes over an authenticated SSH session without clear-text file credentials.” verifies the action “Configure SSH File Transfer Protocol using the authorized SSH service.” for this situation: A remote file exchange must copy files over an encrypted channel and the available appliance supports SFTP but not FTPS.

Incorrect Answers

B:

TCP 587 is commonly used for authenticated mail submission, while TCP 25 is primarily server-to-server SMTP transport. For the situation described—A remote file exchange must copy files over an encrypted channel and the available appliance supports SFTP but not FTPS—this would not demonstrate the specified intervention. The relevant evidence is “A transfer completes over an authenticated SSH session without clear-text file credentials.”.

C:

SNMP polling commonly queries managed devices on UDP 161. For the situation described—A remote file exchange must copy files over an encrypted channel and the available appliance supports SFTP but not FTPS—this would not demonstrate the specified intervention. The relevant evidence is “A transfer completes over an authenticated SSH session without clear-text file credentials.”.

D:

Telnet on TCP 23 does not encrypt its management traffic. For the situation described—A remote file exchange must copy files over an encrypted channel and the available appliance supports SFTP but not FTPS—this would not demonstrate the specified intervention. The relevant evidence is “A transfer completes over an authenticated SSH session without clear-text file credentials.”.

Question 661

Two routers show differing clocks and syslog events cannot be correlated after the firewall blocks network time synchronization. Which action most directly addresses this problem?

  1. Allow the DHCP relay exchange using UDP 67 and 68 as appropriate.
  2. Permit the approved trap receiver flow on UDP 162 from managed devices.
  3. Allow NTP communication to the approved time servers using UDP 123.
  4. Allow TCP port 443 to the intended destination under the web policy.

Explanation

Correct Answer

C:

NTP commonly communicates on UDP port 123 to synchronize device time. In this situation—Two routers show differing clocks and syslog events cannot be correlated after the firewall blocks network time synchronization—the right response is “Allow NTP communication to the approved time servers using UDP 123.”. A confirming result would be “Both routers show synchronized clocks and matching timestamps for a controlled event.”.

Incorrect Answers

A:

DHCP uses client/server UDP 68/67 and may require a relay between subnets. That does not directly address the condition described—Two routers show differing clocks and syslog events cannot be correlated after the firewall blocks network time synchronization. “Allow NTP communication to the approved time servers using UDP 123.” is the appropriate response because nTP commonly communicates on UDP port 123 to synchronize device time.

B:

SNMP traps are pushed to an event receiver, conventionally on UDP 162. That does not directly address the condition described—Two routers show differing clocks and syslog events cannot be correlated after the firewall blocks network time synchronization. “Allow NTP communication to the approved time servers using UDP 123.” is the appropriate response because nTP commonly communicates on UDP port 123 to synchronize device time.

D:

HTTPS commonly uses TCP 443, whereas port 80 is unencrypted HTTP. That does not directly address the condition described—Two routers show differing clocks and syslog events cannot be correlated after the firewall blocks network time synchronization. “Allow NTP communication to the approved time servers using UDP 123.” is the appropriate response because nTP commonly communicates on UDP port 123 to synchronize device time.

Question 662

Two routers show differing clocks and syslog events cannot be correlated after the firewall blocks network time synchronization. Which result BEST confirms the problem has been resolved?

  1. A test trap appears in the monitoring collector with the correct source identifier.
  2. Both routers show synchronized clocks and matching timestamps for a controlled event.
  3. The monitoring console receives fresh interface counters using approved SNMP credentials.
  4. A transfer completes over an authenticated SSH session without clear-text file credentials.

Explanation

Correct Answer

B:

NTP commonly communicates on UDP port 123 to synchronize device time. The outcome “Both routers show synchronized clocks and matching timestamps for a controlled event.” verifies the action “Allow NTP communication to the approved time servers using UDP 123.” for this situation: Two routers show differing clocks and syslog events cannot be correlated after the firewall blocks network time synchronization.

Incorrect Answers

A:

SNMP traps are pushed to an event receiver, conventionally on UDP 162. For the situation described—Two routers show differing clocks and syslog events cannot be correlated after the firewall blocks network time synchronization—this would not demonstrate the specified intervention. The relevant evidence is “Both routers show synchronized clocks and matching timestamps for a controlled event.”.

C:

SNMP polling commonly queries managed devices on UDP 161. For the situation described—Two routers show differing clocks and syslog events cannot be correlated after the firewall blocks network time synchronization—this would not demonstrate the specified intervention. The relevant evidence is “Both routers show synchronized clocks and matching timestamps for a controlled event.”.

D:

SFTP uses the SSH transport and is not the same protocol as FTP with TLS. For the situation described—Two routers show differing clocks and syslog events cannot be correlated after the firewall blocks network time synchronization—this would not demonstrate the specified intervention. The relevant evidence is “Both routers show synchronized clocks and matching timestamps for a controlled event.”.

Question 663

A legacy mail client downloads messages using POP3 over an unencrypted port and the server requires implicit TLS. What is the MOST appropriate technician response?

  1. Configure the supported POP3-over-TLS endpoint on TCP 995.
  2. Allow TCP port 443 to the intended destination under the web policy.
  3. Disable or restrict Telnet and use supported SSH management instead.
  4. Configure SSH File Transfer Protocol using the authorized SSH service.

Explanation

Correct Answer

A:

POP3S conventionally uses TCP 995 for encrypted mailbox retrieval. In this situation—A legacy mail client downloads messages using POP3 over an unencrypted port and the server requires implicit TLS—the right response is “Configure the supported POP3-over-TLS endpoint on TCP 995.”. A confirming result would be “The client retrieves a message with successful TLS negotiation.”.

Incorrect Answers

B:

HTTPS commonly uses TCP 443, whereas port 80 is unencrypted HTTP. That does not directly address the condition described—A legacy mail client downloads messages using POP3 over an unencrypted port and the server requires implicit TLS. “Configure the supported POP3-over-TLS endpoint on TCP 995.” is the appropriate response because pOP3S conventionally uses TCP 995 for encrypted mailbox retrieval.

C:

Telnet on TCP 23 does not encrypt its management traffic. That does not directly address the condition described—A legacy mail client downloads messages using POP3 over an unencrypted port and the server requires implicit TLS. “Configure the supported POP3-over-TLS endpoint on TCP 995.” is the appropriate response because pOP3S conventionally uses TCP 995 for encrypted mailbox retrieval.

D:

SFTP uses the SSH transport and is not the same protocol as FTP with TLS. That does not directly address the condition described—A legacy mail client downloads messages using POP3 over an unencrypted port and the server requires implicit TLS. “Configure the supported POP3-over-TLS endpoint on TCP 995.” is the appropriate response because pOP3S conventionally uses TCP 995 for encrypted mailbox retrieval.

Question 664

A legacy mail client downloads messages using POP3 over an unencrypted port and the server requires implicit TLS. Which observation directly verifies a successful repair?

  1. A DNS lookup returns the intended A record from the resolver.
  2. A verified SSH session reaches the device and negotiates encryption.
  3. The client retrieves a message with successful TLS negotiation.
  4. The client receives a valid lease, mask and default gateway.

Explanation

Correct Answer

C:

POP3S conventionally uses TCP 995 for encrypted mailbox retrieval. The outcome “The client retrieves a message with successful TLS negotiation.” verifies the action “Configure the supported POP3-over-TLS endpoint on TCP 995.” for this situation: A legacy mail client downloads messages using POP3 over an unencrypted port and the server requires implicit TLS.

Incorrect Answers

A:

DNS conventionally uses port 53 and can use UDP or TCP. For the situation described—A legacy mail client downloads messages using POP3 over an unencrypted port and the server requires implicit TLS—this would not demonstrate the specified intervention. The relevant evidence is “The client retrieves a message with successful TLS negotiation.”.

B:

SSH provides encrypted remote command access over TCP 22. For the situation described—A legacy mail client downloads messages using POP3 over an unencrypted port and the server requires implicit TLS—this would not demonstrate the specified intervention. The relevant evidence is “The client retrieves a message with successful TLS negotiation.”.

D:

DHCP uses client/server UDP 68/67 and may require a relay between subnets. For the situation described—A legacy mail client downloads messages using POP3 over an unencrypted port and the server requires implicit TLS—this would not demonstrate the specified intervention. The relevant evidence is “The client retrieves a message with successful TLS negotiation.”.

Question 665

A crowded campus upgraded to Wi-Fi 6 and wants to serve many simultaneous small-packet clients without adding bandwidth. Which change best satisfies the stated requirement?

  1. Provide a compatible 5 GHz or 2.4 GHz SSID to that legacy client.
  2. Use a supported WPA3-capable client or an appropriate legacy band.
  3. Reduce client density by adding or balancing AP capacity and airtime.
  4. Enable supported OFDMA scheduling on compatible AP and client radios.

Explanation

Correct Answer

D:

OFDMA shares channel resources among multiple clients in supported 802.11ax deployments. In this situation—A crowded campus upgraded to Wi-Fi 6 and wants to serve many simultaneous small-packet clients without adding bandwidth—the right response is “Enable supported OFDMA scheduling on compatible AP and client radios.”. A confirming result would be “A dense-client load test shows reduced contention and acceptable latency.”.

Incorrect Answers

A:

Wi-Fi 5 hardware lacks a 6 GHz radio. That does not directly address the condition described—A crowded campus upgraded to Wi-Fi 6 and wants to serve many simultaneous small-packet clients without adding bandwidth. “Enable supported OFDMA scheduling on compatible AP and client radios.” is the appropriate response because oFDMA shares channel resources among multiple clients in supported 802.11ax deployments.

B:

6 GHz Wi-Fi generally requires enhanced security support such as WPA3. That does not directly address the condition described—A crowded campus upgraded to Wi-Fi 6 and wants to serve many simultaneous small-packet clients without adding bandwidth. “Enable supported OFDMA scheduling on compatible AP and client radios.” is the appropriate response because oFDMA shares channel resources among multiple clients in supported 802.11ax deployments.

C:

High signal alone does not prevent airtime exhaustion when too many stations share one radio. That does not directly address the condition described—A crowded campus upgraded to Wi-Fi 6 and wants to serve many simultaneous small-packet clients without adding bandwidth. “Enable supported OFDMA scheduling on compatible AP and client radios.” is the appropriate response because oFDMA shares channel resources among multiple clients in supported 802.11ax deployments.

Question 666

A crowded campus upgraded to Wi-Fi 6 and wants to serve many simultaneous small-packet clients without adding bandwidth. What evidence shows that the intended requirement has been met?

  1. Association counts and channel utilization distribute across the AP cells.
  2. A dense-client load test shows reduced contention and acceptable latency.
  3. The laptop connects on a supported band and obtains network access.
  4. A compatible client authenticates and obtains normal connectivity.

Explanation

Correct Answer

B:

OFDMA shares channel resources among multiple clients in supported 802.11ax deployments. The outcome “A dense-client load test shows reduced contention and acceptable latency.” verifies the action “Enable supported OFDMA scheduling on compatible AP and client radios.” for this situation: A crowded campus upgraded to Wi-Fi 6 and wants to serve many simultaneous small-packet clients without adding bandwidth.

Incorrect Answers

A:

High signal alone does not prevent airtime exhaustion when too many stations share one radio. For the situation described—A crowded campus upgraded to Wi-Fi 6 and wants to serve many simultaneous small-packet clients without adding bandwidth—this would not demonstrate the specified intervention. The relevant evidence is “A dense-client load test shows reduced contention and acceptable latency.”.

C:

Wi-Fi 5 hardware lacks a 6 GHz radio. For the situation described—A crowded campus upgraded to Wi-Fi 6 and wants to serve many simultaneous small-packet clients without adding bandwidth—this would not demonstrate the specified intervention. The relevant evidence is “A dense-client load test shows reduced contention and acceptable latency.”.

D:

6 GHz Wi-Fi generally requires enhanced security support such as WPA3. For the situation described—A crowded campus upgraded to Wi-Fi 6 and wants to serve many simultaneous small-packet clients without adding bandwidth—this would not demonstrate the specified intervention. The relevant evidence is “A dense-client load test shows reduced contention and acceptable latency.”.

Question 667

An AP installed near an airport keeps moving away from its planned 5 GHz channel after detecting radar signals. What should the technician configure or repair to resolve this issue?

  1. Move the AP to a planned nonoverlapping channel based on local measurements.
  2. Use a permitted non-DFS channel or plan compliant dynamic frequency selection behavior.
  3. Select a cleaner non-overlapping 2.4 GHz channel after a site survey.
  4. Use a supported directional antenna pattern aimed along the aisle after a site survey.

Explanation

Correct Answer

B:

DFS channels require radar detection and channel vacating when necessary. In this situation—An AP installed near an airport keeps moving away from its planned 5 GHz channel after detecting radar signals—the right response is “Use a permitted non-DFS channel or plan compliant dynamic frequency selection behavior.”. A confirming result would be “The AP selects an authorized channel and radar events do not cause unexpected service interruption.”.

Incorrect Answers

A:

In common 20 MHz 2.4 GHz deployments, channels 1, 6 and 11 are preferred for nonoverlapping plans where permitted. That does not directly address the condition described—An AP installed near an airport keeps moving away from its planned 5 GHz channel after detecting radar signals. “Use a permitted non-DFS channel or plan compliant dynamic frequency selection behavior.” is the appropriate response because dFS channels require radar detection and channel vacating when necessary.

C:

Overlapping 2.4 GHz channels increase contention and interference. That does not directly address the condition described—An AP installed near an airport keeps moving away from its planned 5 GHz channel after detecting radar signals. “Use a permitted non-DFS channel or plan compliant dynamic frequency selection behavior.” is the appropriate response because dFS channels require radar detection and channel vacating when necessary.

D:

Directional antennas focus available radio energy toward a planned coverage area. That does not directly address the condition described—An AP installed near an airport keeps moving away from its planned 5 GHz channel after detecting radar signals. “Use a permitted non-DFS channel or plan compliant dynamic frequency selection behavior.” is the appropriate response because dFS channels require radar detection and channel vacating when necessary.

Question 668

An AP installed near an airport keeps moving away from its planned 5 GHz channel after detecting radar signals. How should the technician verify the corrective change?

  1. The AP selects an authorized channel and radar events do not cause unexpected service interruption.
  2. Measured aisle coverage improves without leaking excessive RF into adjacent areas.
  3. A valid individual identity associates while a disabled identity fails authentication.
  4. Analyzer captures show less adjacent-channel overlap and lower retransmission rates.

Explanation

Correct Answer

A:

DFS channels require radar detection and channel vacating when necessary. The outcome “The AP selects an authorized channel and radar events do not cause unexpected service interruption.” verifies the action “Use a permitted non-DFS channel or plan compliant dynamic frequency selection behavior.” for this situation: An AP installed near an airport keeps moving away from its planned 5 GHz channel after detecting radar signals.

Incorrect Answers

B:

Directional antennas focus available radio energy toward a planned coverage area. For the situation described—An AP installed near an airport keeps moving away from its planned 5 GHz channel after detecting radar signals—this would not demonstrate the specified intervention. The relevant evidence is “The AP selects an authorized channel and radar events do not cause unexpected service interruption.”.

C:

Enterprise WLAN security integrates per-user authentication rather than relying on one shared PSK. For the situation described—An AP installed near an airport keeps moving away from its planned 5 GHz channel after detecting radar signals—this would not demonstrate the specified intervention. The relevant evidence is “The AP selects an authorized channel and radar events do not cause unexpected service interruption.”.

D:

In common 20 MHz 2.4 GHz deployments, channels 1, 6 and 11 are preferred for nonoverlapping plans where permitted. For the situation described—An AP installed near an airport keeps moving away from its planned 5 GHz channel after detecting radar signals—this would not demonstrate the specified intervention. The relevant evidence is “The AP selects an authorized channel and radar events do not cause unexpected service interruption.”.

Question 669

A long narrow warehouse aisle has poor coverage with an omnidirectional AP centered at the entrance. Which intervention is best supported by the evidence?

  1. Select a cleaner non-overlapping 2.4 GHz channel after a site survey.
  2. Move the AP to a planned nonoverlapping channel based on local measurements.
  3. Use a supported directional antenna pattern aimed along the aisle after a site survey.
  4. Use a permitted non-DFS channel or plan compliant dynamic frequency selection behavior.

Explanation

Correct Answer

C:

Directional antennas focus available radio energy toward a planned coverage area. In this situation—A long narrow warehouse aisle has poor coverage with an omnidirectional AP centered at the entrance—the right response is “Use a supported directional antenna pattern aimed along the aisle after a site survey.”. A confirming result would be “Measured aisle coverage improves without leaking excessive RF into adjacent areas.”.

Incorrect Answers

A:

Overlapping 2.4 GHz channels increase contention and interference. That does not directly address the condition described—A long narrow warehouse aisle has poor coverage with an omnidirectional AP centered at the entrance. “Use a supported directional antenna pattern aimed along the aisle after a site survey.” is the appropriate response because directional antennas focus available radio energy toward a planned coverage area.

B:

In common 20 MHz 2.4 GHz deployments, channels 1, 6 and 11 are preferred for nonoverlapping plans where permitted. That does not directly address the condition described—A long narrow warehouse aisle has poor coverage with an omnidirectional AP centered at the entrance. “Use a supported directional antenna pattern aimed along the aisle after a site survey.” is the appropriate response because directional antennas focus available radio energy toward a planned coverage area.

D:

DFS channels require radar detection and channel vacating when necessary. That does not directly address the condition described—A long narrow warehouse aisle has poor coverage with an omnidirectional AP centered at the entrance. “Use a supported directional antenna pattern aimed along the aisle after a site survey.” is the appropriate response because directional antennas focus available radio energy toward a planned coverage area.

Question 670

A long narrow warehouse aisle has poor coverage with an omnidirectional AP centered at the entrance. Which test outcome demonstrates that the chosen action worked?

  1. Association counts and channel utilization distribute across the AP cells.
  2. Measured aisle coverage improves without leaking excessive RF into adjacent areas.
  3. Analyzer captures show less adjacent-channel overlap and lower retransmission rates.
  4. A valid individual identity associates while a disabled identity fails authentication.

Explanation

Correct Answer

B:

Directional antennas focus available radio energy toward a planned coverage area. The outcome “Measured aisle coverage improves without leaking excessive RF into adjacent areas.” verifies the action “Use a supported directional antenna pattern aimed along the aisle after a site survey.” for this situation: A long narrow warehouse aisle has poor coverage with an omnidirectional AP centered at the entrance.

Incorrect Answers

A:

High signal alone does not prevent airtime exhaustion when too many stations share one radio. For the situation described—A long narrow warehouse aisle has poor coverage with an omnidirectional AP centered at the entrance—this would not demonstrate the specified intervention. The relevant evidence is “Measured aisle coverage improves without leaking excessive RF into adjacent areas.”.

C:

In common 20 MHz 2.4 GHz deployments, channels 1, 6 and 11 are preferred for nonoverlapping plans where permitted. For the situation described—A long narrow warehouse aisle has poor coverage with an omnidirectional AP centered at the entrance—this would not demonstrate the specified intervention. The relevant evidence is “Measured aisle coverage improves without leaking excessive RF into adjacent areas.”.

D:

Enterprise WLAN security integrates per-user authentication rather than relying on one shared PSK. For the situation described—A long narrow warehouse aisle has poor coverage with an omnidirectional AP centered at the entrance—this would not demonstrate the specified intervention. The relevant evidence is “Measured aisle coverage improves without leaking excessive RF into adjacent areas.”.