McAfee-Secured Website

Exam Bundle

Exam Code: 220-1201

Exam Name CompTIA A+ Certification Exam: Core 1

Certification Provider: CompTIA

Corresponding Certification: CompTIA A+

CompTIA 220-1201 Bundle $44.99

100% CompTIA 220-1201 Guaranteed Success With Testking Training Materials

Get Real 220-1201 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    220-1201 Questions & Answers

    527 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 220-1201 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 220-1201 Video Course

    220-1201 Video Course

    106 Video Lectures

    220-1201 Video Course is developed by CompTIA Professionals to help you pass the 220-1201 exam.

    Description

    This course will improve your knowledge and skills required to pass CompTIA A+ Certification Exam: Core 1 exam.
  • Study Guide

    220-1201 Study Guide

    2615 PDF Pages

    Developed by industry experts, this 2615-page guide spells out in painstaking detail all of the information you need to ace 220-1201 exam.

CompTIA A+ Certification Exam: Core 1 (220-1201) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    527 Questions

    $124.99
  • 220-1201 Video Course

    Video Course

    106 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    2615 PDF Pages

    $29.99

CompTIA 220-1201 Practice Test 66

Question 650

A fleet smartphone cannot connect to the required corporate AP because a device-compliance rule blocks WLAN profiles. Which test outcome demonstrates that the chosen action worked?

  1. The management console reports compliance and the device joins the intended SSID.
  2. A test call completes over Wi-Fi where the carrier and policy support it.
  3. The designated line appears as active and a test packet reaches the carrier network.
  4. The cellular settings show an active line and mobile data transfers over LTE/5G.

Explanation

Correct Answer

A:

MDM can centrally provision or restrict network profiles before wireless authentication. The outcome “The management console reports compliance and the device joins the intended SSID.” verifies the action “Correct the device's enrollment and push the authorized Wi-Fi configuration profile.” for this situation: A fleet smartphone cannot connect to the required corporate AP because a device-compliance rule blocks WLAN profiles.

Incorrect Answers

B:

Wi-Fi calling depends on carrier provisioning as well as a compatible phone and usable Wi-Fi. For the situation described—A fleet smartphone cannot connect to the required corporate AP because a device-compliance rule blocks WLAN profiles—this would not demonstrate the specified intervention. The relevant evidence is “The management console reports compliance and the device joins the intended SSID.”.

C:

Subscriber identity and line activation must match the enterprise account. For the situation described—A fleet smartphone cannot connect to the required corporate AP because a device-compliance rule blocks WLAN profiles—this would not demonstrate the specified intervention. The relevant evidence is “The management console reports compliance and the device joins the intended SSID.”.

D:

An eSIM is a provisioned software subscriber profile, not a removable plastic SIM. For the situation described—A fleet smartphone cannot connect to the required corporate AP because a device-compliance rule blocks WLAN profiles—this would not demonstrate the specified intervention. The relevant evidence is “The management console reports compliance and the device joins the intended SSID.”.

Question 651

A field worker must migrate business contacts to a replacement phone while preserving a separate personal account. Which action most directly addresses this problem?

  1. Remove the incorrect account binding and configure the intended corporate account.
  2. Synchronize the approved business contact account to the new managed device.
  3. Use the organization's supported managed work profile or app container.
  4. Resolve the policy requirement in the MDM enrollment and compliance workflow.

Explanation

Correct Answer

B:

Account-scoped synchronization preserves separation between business and personal datasets. In this situation—A field worker must migrate business contacts to a replacement phone while preserving a separate personal account—the right response is “Synchronize the approved business contact account to the new managed device.”. A confirming result would be “Selected enterprise contacts appear without copying personal contacts.”.

Incorrect Answers

A:

Sync identity errors are addressed at account configuration, not the display hardware. That does not directly address the condition described—A field worker must migrate business contacts to a replacement phone while preserving a separate personal account. “Synchronize the approved business contact account to the new managed device.” is the appropriate response because account-scoped synchronization preserves separation between business and personal datasets.

C:

Separation of corporate and personal data is a key BYOD management purpose. That does not directly address the condition described—A field worker must migrate business contacts to a replacement phone while preserving a separate personal account. “Synchronize the approved business contact account to the new managed device.” is the appropriate response because account-scoped synchronization preserves separation between business and personal datasets.

D:

MDM enforces device policy before allowing protected applications. That does not directly address the condition described—A field worker must migrate business contacts to a replacement phone while preserving a separate personal account. “Synchronize the approved business contact account to the new managed device.” is the appropriate response because account-scoped synchronization preserves separation between business and personal datasets.

Question 652

A field worker must migrate business contacts to a replacement phone while preserving a separate personal account. Which result BEST confirms the problem has been resolved?

  1. New mail and calendar content map to the correct user's mailbox.
  2. A new test contact appears on the phone and account portal.
  3. The management console reports compliant and the corporate app opens.
  4. Selected enterprise contacts appear without copying personal contacts.

Explanation

Correct Answer

D:

Account-scoped synchronization preserves separation between business and personal datasets. The outcome “Selected enterprise contacts appear without copying personal contacts.” verifies the action “Synchronize the approved business contact account to the new managed device.” for this situation: A field worker must migrate business contacts to a replacement phone while preserving a separate personal account.

Incorrect Answers

A:

Sync identity errors are addressed at account configuration, not the display hardware. For the situation described—A field worker must migrate business contacts to a replacement phone while preserving a separate personal account—this would not demonstrate the specified intervention. The relevant evidence is “Selected enterprise contacts appear without copying personal contacts.”.

B:

Contact sync is controlled separately from calendar sync. For the situation described—A field worker must migrate business contacts to a replacement phone while preserving a separate personal account—this would not demonstrate the specified intervention. The relevant evidence is “Selected enterprise contacts appear without copying personal contacts.”.

C:

MDM enforces device policy before allowing protected applications. For the situation described—A field worker must migrate business contacts to a replacement phone while preserving a separate personal account—this would not demonstrate the specified intervention. The relevant evidence is “Selected enterprise contacts appear without copying personal contacts.”.

Question 653

A mail submission client is rejected by a corporate gateway because it attempts to send authenticated outgoing messages on TCP 25 instead of the provider's supported submission service. What is the MOST appropriate technician response?

  1. Enable the approved SMB connection on TCP 445 between client and file server.
  2. Permit the intended IMAP service on TCP 143 or its secured configured port.
  3. Configure authenticated SMTP submission on the provider's documented TCP 587 endpoint.
  4. Allow required DNS queries to the designated resolver using the correct TCP/UDP handling.

Explanation

Correct Answer

C:

TCP 587 is commonly used for authenticated mail submission, while TCP 25 is primarily server-to-server SMTP transport. In this situation—A mail submission client is rejected by a corporate gateway because it attempts to send authenticated outgoing messages on TCP 25 instead of the provider's supported submission service—the right response is “Configure authenticated SMTP submission on the provider's documented TCP 587 endpoint.”. A confirming result would be “The mail client submits a message through authenticated SMTP and it reaches the outbound queue.”.

Incorrect Answers

A:

Modern SMB file sharing commonly runs on TCP 445, not ICMP. That does not directly address the condition described—A mail submission client is rejected by a corporate gateway because it attempts to send authenticated outgoing messages on TCP 25 instead of the provider's supported submission service. “Configure authenticated SMTP submission on the provider's documented TCP 587 endpoint.” is the appropriate response because tCP 587 is commonly used for authenticated mail submission, while TCP 25 is primarily server-to-server SMTP transport.

B:

IMAP accesses server-side mailboxes, while SMTP handles sending. That does not directly address the condition described—A mail submission client is rejected by a corporate gateway because it attempts to send authenticated outgoing messages on TCP 25 instead of the provider's supported submission service. “Configure authenticated SMTP submission on the provider's documented TCP 587 endpoint.” is the appropriate response because tCP 587 is commonly used for authenticated mail submission, while TCP 25 is primarily server-to-server SMTP transport.

D:

DNS conventionally uses port 53 and can use UDP or TCP. That does not directly address the condition described—A mail submission client is rejected by a corporate gateway because it attempts to send authenticated outgoing messages on TCP 25 instead of the provider's supported submission service. “Configure authenticated SMTP submission on the provider's documented TCP 587 endpoint.” is the appropriate response because tCP 587 is commonly used for authenticated mail submission, while TCP 25 is primarily server-to-server SMTP transport.

Question 654

A mail submission client is rejected by a corporate gateway because it attempts to send authenticated outgoing messages on TCP 25 instead of the provider's supported submission service. Which observation directly verifies a successful repair?

  1. A transfer completes over an authenticated SSH session without clear-text file credentials.
  2. The monitoring console receives fresh interface counters using approved SNMP credentials.
  3. The mail client submits a message through authenticated SMTP and it reaches the outbound queue.
  4. The client lists server mail folders through the approved IMAP connection.

Explanation

Correct Answer

C:

TCP 587 is commonly used for authenticated mail submission, while TCP 25 is primarily server-to-server SMTP transport. The outcome “The mail client submits a message through authenticated SMTP and it reaches the outbound queue.” verifies the action “Configure authenticated SMTP submission on the provider's documented TCP 587 endpoint.” for this situation: A mail submission client is rejected by a corporate gateway because it attempts to send authenticated outgoing messages on TCP 25 instead of the provider's supported submission service.

Incorrect Answers

A:

SFTP uses the SSH transport and is not the same protocol as FTP with TLS. For the situation described—A mail submission client is rejected by a corporate gateway because it attempts to send authenticated outgoing messages on TCP 25 instead of the provider's supported submission service—this would not demonstrate the specified intervention. The relevant evidence is “The mail client submits a message through authenticated SMTP and it reaches the outbound queue.”.

B:

SNMP polling commonly queries managed devices on UDP 161. For the situation described—A mail submission client is rejected by a corporate gateway because it attempts to send authenticated outgoing messages on TCP 25 instead of the provider's supported submission service—this would not demonstrate the specified intervention. The relevant evidence is “The mail client submits a message through authenticated SMTP and it reaches the outbound queue.”.

D:

IMAP accesses server-side mailboxes, while SMTP handles sending. For the situation described—A mail submission client is rejected by a corporate gateway because it attempts to send authenticated outgoing messages on TCP 25 instead of the provider's supported submission service—this would not demonstrate the specified intervention. The relevant evidence is “The mail client submits a message through authenticated SMTP and it reaches the outbound queue.”.

Question 655

A monitoring console cannot retrieve an access switch's interface counters because UDP 161 is denied between the monitoring host and switch. Which change best satisfies the stated requirement?

  1. Permit the intended IMAP service on TCP 143 or its secured configured port.
  2. Permit the authorized SNMP polling flow to the device on the documented port.
  3. Permit the approved trap receiver flow on UDP 162 from managed devices.
  4. Allow the approved LDAP service on TCP 389 or configured secured alternative.

Explanation

Correct Answer

B:

SNMP polling commonly queries managed devices on UDP 161. In this situation—A monitoring console cannot retrieve an access switch's interface counters because UDP 161 is denied between the monitoring host and switch—the right response is “Permit the authorized SNMP polling flow to the device on the documented port.”. A confirming result would be “The monitoring console receives fresh interface counters using approved SNMP credentials.”.

Incorrect Answers

A:

IMAP accesses server-side mailboxes, while SMTP handles sending. That does not directly address the condition described—A monitoring console cannot retrieve an access switch's interface counters because UDP 161 is denied between the monitoring host and switch. “Permit the authorized SNMP polling flow to the device on the documented port.” is the appropriate response because sNMP polling commonly queries managed devices on UDP 161.

C:

SNMP traps are pushed to an event receiver, conventionally on UDP 162. That does not directly address the condition described—A monitoring console cannot retrieve an access switch's interface counters because UDP 161 is denied between the monitoring host and switch. “Permit the authorized SNMP polling flow to the device on the documented port.” is the appropriate response because sNMP polling commonly queries managed devices on UDP 161.

D:

LDAP queries directory information, distinct from file and web protocols. That does not directly address the condition described—A monitoring console cannot retrieve an access switch's interface counters because UDP 161 is denied between the monitoring host and switch. “Permit the authorized SNMP polling flow to the device on the documented port.” is the appropriate response because sNMP polling commonly queries managed devices on UDP 161.

Question 656

A monitoring console cannot retrieve an access switch's interface counters because UDP 161 is denied between the monitoring host and switch. What evidence shows that the intended requirement has been met?

  1. The monitoring console receives fresh interface counters using approved SNMP credentials.
  2. A transfer completes over an authenticated SSH session without clear-text file credentials.
  3. A test trap appears in the monitoring collector with the correct source identifier.
  4. Both routers show synchronized clocks and matching timestamps for a controlled event.

Explanation

Correct Answer

A:

SNMP polling commonly queries managed devices on UDP 161. The outcome “The monitoring console receives fresh interface counters using approved SNMP credentials.” verifies the action “Permit the authorized SNMP polling flow to the device on the documented port.” for this situation: A monitoring console cannot retrieve an access switch's interface counters because UDP 161 is denied between the monitoring host and switch.

Incorrect Answers

B:

SFTP uses the SSH transport and is not the same protocol as FTP with TLS. For the situation described—A monitoring console cannot retrieve an access switch's interface counters because UDP 161 is denied between the monitoring host and switch—this would not demonstrate the specified intervention. The relevant evidence is “The monitoring console receives fresh interface counters using approved SNMP credentials.”.

C:

SNMP traps are pushed to an event receiver, conventionally on UDP 162. For the situation described—A monitoring console cannot retrieve an access switch's interface counters because UDP 161 is denied between the monitoring host and switch—this would not demonstrate the specified intervention. The relevant evidence is “The monitoring console receives fresh interface counters using approved SNMP credentials.”.

D:

NTP commonly communicates on UDP port 123 to synchronize device time. For the situation described—A monitoring console cannot retrieve an access switch's interface counters because UDP 161 is denied between the monitoring host and switch—this would not demonstrate the specified intervention. The relevant evidence is “The monitoring console receives fresh interface counters using approved SNMP credentials.”.

Question 657

A network operations platform receives no asynchronous SNMP traps from switches even though polling works. What should the technician configure or repair to resolve this issue?

  1. Permit the authorized SNMP polling flow to the device on the documented port.
  2. Permit the intended IMAP service on TCP 143 or its secured configured port.
  3. Allow NTP communication to the approved time servers using UDP 123.
  4. Permit the approved trap receiver flow on UDP 162 from managed devices.

Explanation

Correct Answer

D:

SNMP traps are pushed to an event receiver, conventionally on UDP 162. In this situation—A network operations platform receives no asynchronous SNMP traps from switches even though polling works—the right response is “Permit the approved trap receiver flow on UDP 162 from managed devices.”. A confirming result would be “A test trap appears in the monitoring collector with the correct source identifier.”.

Incorrect Answers

A:

SNMP polling commonly queries managed devices on UDP 161. That does not directly address the condition described—A network operations platform receives no asynchronous SNMP traps from switches even though polling works. “Permit the approved trap receiver flow on UDP 162 from managed devices.” is the appropriate response because sNMP traps are pushed to an event receiver, conventionally on UDP 162.

B:

IMAP accesses server-side mailboxes, while SMTP handles sending. That does not directly address the condition described—A network operations platform receives no asynchronous SNMP traps from switches even though polling works. “Permit the approved trap receiver flow on UDP 162 from managed devices.” is the appropriate response because sNMP traps are pushed to an event receiver, conventionally on UDP 162.

C:

NTP commonly communicates on UDP port 123 to synchronize device time. That does not directly address the condition described—A network operations platform receives no asynchronous SNMP traps from switches even though polling works. “Permit the approved trap receiver flow on UDP 162 from managed devices.” is the appropriate response because sNMP traps are pushed to an event receiver, conventionally on UDP 162.

Question 658

A network operations platform receives no asynchronous SNMP traps from switches even though polling works. How should the technician verify the corrective change?

  1. The monitoring console receives fresh interface counters using approved SNMP credentials.
  2. Both routers show synchronized clocks and matching timestamps for a controlled event.
  3. A test trap appears in the monitoring collector with the correct source identifier.
  4. A packet inspection shows encrypted SSH management without Telnet credentials.

Explanation

Correct Answer

C:

SNMP traps are pushed to an event receiver, conventionally on UDP 162. The outcome “A test trap appears in the monitoring collector with the correct source identifier.” verifies the action “Permit the approved trap receiver flow on UDP 162 from managed devices.” for this situation: A network operations platform receives no asynchronous SNMP traps from switches even though polling works.

Incorrect Answers

A:

SNMP polling commonly queries managed devices on UDP 161. For the situation described—A network operations platform receives no asynchronous SNMP traps from switches even though polling works—this would not demonstrate the specified intervention. The relevant evidence is “A test trap appears in the monitoring collector with the correct source identifier.”.

B:

NTP commonly communicates on UDP port 123 to synchronize device time. For the situation described—A network operations platform receives no asynchronous SNMP traps from switches even though polling works—this would not demonstrate the specified intervention. The relevant evidence is “A test trap appears in the monitoring collector with the correct source identifier.”.

D:

Telnet on TCP 23 does not encrypt its management traffic. For the situation described—A network operations platform receives no asynchronous SNMP traps from switches even though polling works—this would not demonstrate the specified intervention. The relevant evidence is “A test trap appears in the monitoring collector with the correct source identifier.”.

Question 659

A remote file exchange must copy files over an encrypted channel and the available appliance supports SFTP but not FTPS. Which intervention is best supported by the evidence?

  1. Configure SSH File Transfer Protocol using the authorized SSH service.
  2. Allow the DHCP relay exchange using UDP 67 and 68 as appropriate.
  3. Allow NTP communication to the approved time servers using UDP 123.
  4. Disable or restrict Telnet and use supported SSH management instead.

Explanation

Correct Answer

A:

SFTP uses the SSH transport and is not the same protocol as FTP with TLS. In this situation—A remote file exchange must copy files over an encrypted channel and the available appliance supports SFTP but not FTPS—the right response is “Configure SSH File Transfer Protocol using the authorized SSH service.”. A confirming result would be “A transfer completes over an authenticated SSH session without clear-text file credentials.”.

Incorrect Answers

B:

DHCP uses client/server UDP 68/67 and may require a relay between subnets. That does not directly address the condition described—A remote file exchange must copy files over an encrypted channel and the available appliance supports SFTP but not FTPS. “Configure SSH File Transfer Protocol using the authorized SSH service.” is the appropriate response because sFTP uses the SSH transport and is not the same protocol as FTP with TLS.

C:

NTP commonly communicates on UDP port 123 to synchronize device time. That does not directly address the condition described—A remote file exchange must copy files over an encrypted channel and the available appliance supports SFTP but not FTPS. “Configure SSH File Transfer Protocol using the authorized SSH service.” is the appropriate response because sFTP uses the SSH transport and is not the same protocol as FTP with TLS.

D:

Telnet on TCP 23 does not encrypt its management traffic. That does not directly address the condition described—A remote file exchange must copy files over an encrypted channel and the available appliance supports SFTP but not FTPS. “Configure SSH File Transfer Protocol using the authorized SSH service.” is the appropriate response because sFTP uses the SSH transport and is not the same protocol as FTP with TLS.

Question 660

A remote file exchange must copy files over an encrypted channel and the available appliance supports SFTP but not FTPS. Which test outcome demonstrates that the chosen action worked?

  1. A transfer completes over an authenticated SSH session without clear-text file credentials.
  2. The mail client submits a message through authenticated SMTP and it reaches the outbound queue.
  3. The monitoring console receives fresh interface counters using approved SNMP credentials.
  4. A packet inspection shows encrypted SSH management without Telnet credentials.

Explanation

Correct Answer

A:

SFTP uses the SSH transport and is not the same protocol as FTP with TLS. The outcome “A transfer completes over an authenticated SSH session without clear-text file credentials.” verifies the action “Configure SSH File Transfer Protocol using the authorized SSH service.” for this situation: A remote file exchange must copy files over an encrypted channel and the available appliance supports SFTP but not FTPS.

Incorrect Answers

B:

TCP 587 is commonly used for authenticated mail submission, while TCP 25 is primarily server-to-server SMTP transport. For the situation described—A remote file exchange must copy files over an encrypted channel and the available appliance supports SFTP but not FTPS—this would not demonstrate the specified intervention. The relevant evidence is “A transfer completes over an authenticated SSH session without clear-text file credentials.”.

C:

SNMP polling commonly queries managed devices on UDP 161. For the situation described—A remote file exchange must copy files over an encrypted channel and the available appliance supports SFTP but not FTPS—this would not demonstrate the specified intervention. The relevant evidence is “A transfer completes over an authenticated SSH session without clear-text file credentials.”.

D:

Telnet on TCP 23 does not encrypt its management traffic. For the situation described—A remote file exchange must copy files over an encrypted channel and the available appliance supports SFTP but not FTPS—this would not demonstrate the specified intervention. The relevant evidence is “A transfer completes over an authenticated SSH session without clear-text file credentials.”.