McAfee-Secured Website

Exam Bundle

Exam Code: 220-1201

Exam Name CompTIA A+ Certification Exam: Core 1

Certification Provider: CompTIA

Corresponding Certification: CompTIA A+

CompTIA 220-1201 Bundle $44.99

100% CompTIA 220-1201 Guaranteed Success With Testking Training Materials

Get Real 220-1201 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    220-1201 Questions & Answers

    527 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 220-1201 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 220-1201 Video Course

    220-1201 Video Course

    106 Video Lectures

    220-1201 Video Course is developed by CompTIA Professionals to help you pass the 220-1201 exam.

    Description

    This course will improve your knowledge and skills required to pass CompTIA A+ Certification Exam: Core 1 exam.
  • Study Guide

    220-1201 Study Guide

    2615 PDF Pages

    Developed by industry experts, this 2615-page guide spells out in painstaking detail all of the information you need to ace 220-1201 exam.

CompTIA A+ Certification Exam: Core 1 (220-1201) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    527 Questions

    $124.99
  • 220-1201 Video Course

    Video Course

    106 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    2615 PDF Pages

    $29.99

CompTIA 220-1201 Practice Test 29

Question 280

A two-drive RAID 0 array needs one disk replaced after failure but the data was not backed up. After the appropriate change, which observation BEST verifies the intended result?

  1. Restored files pass integrity checks after the array is rebuilt.
  2. A controlled two-member failure simulation remains accessible.
  3. The controller shows a healthy array after rebuild without data corruption.
  4. Unplugging one test member in a controlled maintenance window leaves the array accessible.

Explanation

Correct Answer

A:

RAID 0 stripes without parity or mirroring and has no single-disk fault tolerance. The outcome “Restored files pass integrity checks after the array is rebuilt.” verifies the action “Recover from an independent backup rather than expecting RAID 0 to survive the lost disk.” for this situation: A two-drive RAID 0 array needs one disk replaced after failure but the data was not backed up.

Incorrect Answers

B:

RAID 6 uses dual distributed parity for two-disk failure tolerance. For the situation described—A two-drive RAID 0 array needs one disk replaced after failure but the data was not backed up—this would not demonstrate the specified intervention. The relevant evidence is “Restored files pass integrity checks after the array is rebuilt.”.

C:

RAID 5 generally tolerates one failed disk and rebuilds from distributed parity. For the situation described—A two-drive RAID 0 array needs one disk replaced after failure but the data was not backed up—this would not demonstrate the specified intervention. The relevant evidence is “Restored files pass integrity checks after the array is rebuilt.”.

D:

RAID 1 keeps a mirror copy on each member, though it is not backup. For the situation described—A two-drive RAID 0 array needs one disk replaced after failure but the data was not backed up—this would not demonstrate the specified intervention. The relevant evidence is “Restored files pass integrity checks after the array is rebuilt.”.

Question 281

A workstation needs simple one-drive-failure tolerance using two equal drives. Which action is MOST appropriate for this situation?

  1. Recover from an independent backup rather than expecting RAID 0 to survive the lost disk.
  2. Configure RAID 6 using disks/controller that support dual parity.
  3. Configure RAID 10 with adequate member count and backups.
  4. Configure RAID 1 mirroring with a proper backup strategy.

Explanation

Correct Answer

D:

RAID 1 keeps a mirror copy on each member, though it is not backup. In this situation—A workstation needs simple one-drive-failure tolerance using two equal drives—the right response is “Configure RAID 1 mirroring with a proper backup strategy.”. A confirming result would be “Unplugging one test member in a controlled maintenance window leaves the array accessible.”.

Incorrect Answers

A:

RAID 0 stripes without parity or mirroring and has no single-disk fault tolerance. That does not directly address the condition described—A workstation needs simple one-drive-failure tolerance using two equal drives. “Configure RAID 1 mirroring with a proper backup strategy.” is the appropriate response because rAID 1 keeps a mirror copy on each member, though it is not backup.

B:

RAID 6 uses dual distributed parity for two-disk failure tolerance. That does not directly address the condition described—A workstation needs simple one-drive-failure tolerance using two equal drives. “Configure RAID 1 mirroring with a proper backup strategy.” is the appropriate response because rAID 1 keeps a mirror copy on each member, though it is not backup.

C:

RAID 10 stripes mirrored pairs, combining speed and redundancy. That does not directly address the condition described—A workstation needs simple one-drive-failure tolerance using two equal drives. “Configure RAID 1 mirroring with a proper backup strategy.” is the appropriate response because rAID 1 keeps a mirror copy on each member, though it is not backup.

Question 282

A workstation needs simple one-drive-failure tolerance using two equal drives. After the appropriate change, which observation BEST verifies the intended result?

  1. Unplugging one test member in a controlled maintenance window leaves the array accessible.
  2. A controlled two-member failure simulation remains accessible.
  3. Restored files pass integrity checks after the array is rebuilt.
  4. The controller shows a healthy array after rebuild without data corruption.

Explanation

Correct Answer

A:

RAID 1 keeps a mirror copy on each member, though it is not backup. The outcome “Unplugging one test member in a controlled maintenance window leaves the array accessible.” verifies the action “Configure RAID 1 mirroring with a proper backup strategy.” for this situation: A workstation needs simple one-drive-failure tolerance using two equal drives.

Incorrect Answers

B:

RAID 6 uses dual distributed parity for two-disk failure tolerance. For the situation described—A workstation needs simple one-drive-failure tolerance using two equal drives—this would not demonstrate the specified intervention. The relevant evidence is “Unplugging one test member in a controlled maintenance window leaves the array accessible.”.

C:

RAID 0 stripes without parity or mirroring and has no single-disk fault tolerance. For the situation described—A workstation needs simple one-drive-failure tolerance using two equal drives—this would not demonstrate the specified intervention. The relevant evidence is “Unplugging one test member in a controlled maintenance window leaves the array accessible.”.

D:

RAID 5 generally tolerates one failed disk and rebuilds from distributed parity. For the situation described—A workstation needs simple one-drive-failure tolerance using two equal drives—this would not demonstrate the specified intervention. The relevant evidence is “Unplugging one test member in a controlled maintenance window leaves the array accessible.”.

Question 283

A RAID 5 array of four drives reports one failed member and continues serving data. Which action is MOST appropriate for this situation?

  1. Configure RAID 6 using disks/controller that support dual parity.
  2. Recover from an independent backup rather than expecting RAID 0 to survive the lost disk.
  3. Configure RAID 10 with adequate member count and backups.
  4. Replace the failed member and allow controlled parity rebuild.

Explanation

Correct Answer

D:

RAID 5 generally tolerates one failed disk and rebuilds from distributed parity. In this situation—A RAID 5 array of four drives reports one failed member and continues serving data—the right response is “Replace the failed member and allow controlled parity rebuild.”. A confirming result would be “The controller shows a healthy array after rebuild without data corruption.”.

Incorrect Answers

A:

RAID 6 uses dual distributed parity for two-disk failure tolerance. That does not directly address the condition described—A RAID 5 array of four drives reports one failed member and continues serving data. “Replace the failed member and allow controlled parity rebuild.” is the appropriate response because rAID 5 generally tolerates one failed disk and rebuilds from distributed parity.

B:

RAID 0 stripes without parity or mirroring and has no single-disk fault tolerance. That does not directly address the condition described—A RAID 5 array of four drives reports one failed member and continues serving data. “Replace the failed member and allow controlled parity rebuild.” is the appropriate response because rAID 5 generally tolerates one failed disk and rebuilds from distributed parity.

C:

RAID 10 stripes mirrored pairs, combining speed and redundancy. That does not directly address the condition described—A RAID 5 array of four drives reports one failed member and continues serving data. “Replace the failed member and allow controlled parity rebuild.” is the appropriate response because rAID 5 generally tolerates one failed disk and rebuilds from distributed parity.

Question 284

A RAID 5 array of four drives reports one failed member and continues serving data. After the appropriate change, which observation BEST verifies the intended result?

  1. Restored files pass integrity checks after the array is rebuilt.
  2. The controller shows a healthy array after rebuild without data corruption.
  3. A controlled two-member failure simulation remains accessible.
  4. Unplugging one test member in a controlled maintenance window leaves the array accessible.

Explanation

Correct Answer

B:

RAID 5 generally tolerates one failed disk and rebuilds from distributed parity. The outcome “The controller shows a healthy array after rebuild without data corruption.” verifies the action “Replace the failed member and allow controlled parity rebuild.” for this situation: A RAID 5 array of four drives reports one failed member and continues serving data.

Incorrect Answers

A:

RAID 0 stripes without parity or mirroring and has no single-disk fault tolerance. For the situation described—A RAID 5 array of four drives reports one failed member and continues serving data—this would not demonstrate the specified intervention. The relevant evidence is “The controller shows a healthy array after rebuild without data corruption.”.

C:

RAID 6 uses dual distributed parity for two-disk failure tolerance. For the situation described—A RAID 5 array of four drives reports one failed member and continues serving data—this would not demonstrate the specified intervention. The relevant evidence is “The controller shows a healthy array after rebuild without data corruption.”.

D:

RAID 1 keeps a mirror copy on each member, though it is not backup. For the situation described—A RAID 5 array of four drives reports one failed member and continues serving data—this would not demonstrate the specified intervention. The relevant evidence is “The controller shows a healthy array after rebuild without data corruption.”.

Question 285

A six-drive RAID 6 set needs to sustain any two disk failures without losing the array. Which action is MOST appropriate for this situation?

  1. Recover from an independent backup rather than expecting RAID 0 to survive the lost disk.
  2. Replace the failed member and allow controlled parity rebuild.
  3. Configure RAID 6 using disks/controller that support dual parity.
  4. Configure RAID 1 mirroring with a proper backup strategy.

Explanation

Correct Answer

C:

RAID 6 uses dual distributed parity for two-disk failure tolerance. In this situation—A six-drive RAID 6 set needs to sustain any two disk failures without losing the array—the right response is “Configure RAID 6 using disks/controller that support dual parity.”. A confirming result would be “A controlled two-member failure simulation remains accessible.”.

Incorrect Answers

A:

RAID 0 stripes without parity or mirroring and has no single-disk fault tolerance. That does not directly address the condition described—A six-drive RAID 6 set needs to sustain any two disk failures without losing the array. “Configure RAID 6 using disks/controller that support dual parity.” is the appropriate response because rAID 6 uses dual distributed parity for two-disk failure tolerance.

B:

RAID 5 generally tolerates one failed disk and rebuilds from distributed parity. That does not directly address the condition described—A six-drive RAID 6 set needs to sustain any two disk failures without losing the array. “Configure RAID 6 using disks/controller that support dual parity.” is the appropriate response because rAID 6 uses dual distributed parity for two-disk failure tolerance.

D:

RAID 1 keeps a mirror copy on each member, though it is not backup. That does not directly address the condition described—A six-drive RAID 6 set needs to sustain any two disk failures without losing the array. “Configure RAID 6 using disks/controller that support dual parity.” is the appropriate response because rAID 6 uses dual distributed parity for two-disk failure tolerance.

Question 286

A six-drive RAID 6 set needs to sustain any two disk failures without losing the array. After the appropriate change, which observation BEST verifies the intended result?

  1. Restored files pass integrity checks after the array is rebuilt.
  2. Unplugging one test member in a controlled maintenance window leaves the array accessible.
  3. A controlled two-member failure simulation remains accessible.
  4. The controller shows a healthy array after rebuild without data corruption.

Explanation

Correct Answer

C:

RAID 6 uses dual distributed parity for two-disk failure tolerance. The outcome “A controlled two-member failure simulation remains accessible.” verifies the action “Configure RAID 6 using disks/controller that support dual parity.” for this situation: A six-drive RAID 6 set needs to sustain any two disk failures without losing the array.

Incorrect Answers

A:

RAID 0 stripes without parity or mirroring and has no single-disk fault tolerance. For the situation described—A six-drive RAID 6 set needs to sustain any two disk failures without losing the array—this would not demonstrate the specified intervention. The relevant evidence is “A controlled two-member failure simulation remains accessible.”.

B:

RAID 1 keeps a mirror copy on each member, though it is not backup. For the situation described—A six-drive RAID 6 set needs to sustain any two disk failures without losing the array—this would not demonstrate the specified intervention. The relevant evidence is “A controlled two-member failure simulation remains accessible.”.

D:

RAID 5 generally tolerates one failed disk and rebuilds from distributed parity. For the situation described—A six-drive RAID 6 set needs to sustain any two disk failures without losing the array—this would not demonstrate the specified intervention. The relevant evidence is “A controlled two-member failure simulation remains accessible.”.

Question 287

An application server needs mirrored performance and can spare at least four matching disks. Which action is MOST appropriate for this situation?

  1. Configure RAID 10 with adequate member count and backups.
  2. Replace the failed member and allow controlled parity rebuild.
  3. Configure RAID 1 mirroring with a proper backup strategy.
  4. Configure RAID 6 using disks/controller that support dual parity.

Explanation

Correct Answer

A:

RAID 10 stripes mirrored pairs, combining speed and redundancy. In this situation—An application server needs mirrored performance and can spare at least four matching disks—the right response is “Configure RAID 10 with adequate member count and backups.”. A confirming result would be “Controller reports striped mirrors and tests survive a permitted single-disk failure.”.

Incorrect Answers

B:

RAID 5 generally tolerates one failed disk and rebuilds from distributed parity. That does not directly address the condition described—An application server needs mirrored performance and can spare at least four matching disks. “Configure RAID 10 with adequate member count and backups.” is the appropriate response because rAID 10 stripes mirrored pairs, combining speed and redundancy.

C:

RAID 1 keeps a mirror copy on each member, though it is not backup. That does not directly address the condition described—An application server needs mirrored performance and can spare at least four matching disks. “Configure RAID 10 with adequate member count and backups.” is the appropriate response because rAID 10 stripes mirrored pairs, combining speed and redundancy.

D:

RAID 6 uses dual distributed parity for two-disk failure tolerance. That does not directly address the condition described—An application server needs mirrored performance and can spare at least four matching disks. “Configure RAID 10 with adequate member count and backups.” is the appropriate response because rAID 10 stripes mirrored pairs, combining speed and redundancy.

Question 288

An application server needs mirrored performance and can spare at least four matching disks. After the appropriate change, which observation BEST verifies the intended result?

  1. The SATA controller detects the drive and its volume passes file tests.
  2. Controller reports striped mirrors and tests survive a permitted single-disk failure.
  3. The controller shows a healthy array after rebuild without data corruption.
  4. A controlled two-member failure simulation remains accessible.

Explanation

Correct Answer

B:

RAID 10 stripes mirrored pairs, combining speed and redundancy. The outcome “Controller reports striped mirrors and tests survive a permitted single-disk failure.” verifies the action “Configure RAID 10 with adequate member count and backups.” for this situation: An application server needs mirrored performance and can spare at least four matching disks.

Incorrect Answers

A:

SATA remains a supported SSD interface independent of NVMe. For the situation described—An application server needs mirrored performance and can spare at least four matching disks—this would not demonstrate the specified intervention. The relevant evidence is “Controller reports striped mirrors and tests survive a permitted single-disk failure.”.

C:

RAID 5 generally tolerates one failed disk and rebuilds from distributed parity. For the situation described—An application server needs mirrored performance and can spare at least four matching disks—this would not demonstrate the specified intervention. The relevant evidence is “Controller reports striped mirrors and tests survive a permitted single-disk failure.”.

D:

RAID 6 uses dual distributed parity for two-disk failure tolerance. For the situation described—An application server needs mirrored performance and can spare at least four matching disks—this would not demonstrate the specified intervention. The relevant evidence is “Controller reports striped mirrors and tests survive a permitted single-disk failure.”.

Question 289

A technician needs to archive a small diagnostic image on removable media that laptops can read without optical drives. Which action is MOST appropriate for this situation?

  1. Use compatible USB flash storage and verify file integrity.
  2. Attach a supported external USB DVD reader.
  3. Install SAS-compatible drives according to the enclosure specification.
  4. Install a compatible 2.5-inch SATA SSD.

Explanation

Correct Answer

A:

USB flash provides portable solid-state storage without an optical mechanism. In this situation—A technician needs to archive a small diagnostic image on removable media that laptops can read without optical drives—the right response is “Use compatible USB flash storage and verify file integrity.”. A confirming result would be “The target laptop reads the archive and its checksum matches.”.

Incorrect Answers

B:

Optical discs require a compatible optical drive. That does not directly address the condition described—A technician needs to archive a small diagnostic image on removable media that laptops can read without optical drives. “Use compatible USB flash storage and verify file integrity.” is the appropriate response because uSB flash provides portable solid-state storage without an optical mechanism.

C:

SAS storage targets enterprise controller and connector compatibility. That does not directly address the condition described—A technician needs to archive a small diagnostic image on removable media that laptops can read without optical drives. “Use compatible USB flash storage and verify file integrity.” is the appropriate response because uSB flash provides portable solid-state storage without an optical mechanism.

D:

SATA remains a supported SSD interface independent of NVMe. That does not directly address the condition described—A technician needs to archive a small diagnostic image on removable media that laptops can read without optical drives. “Use compatible USB flash storage and verify file integrity.” is the appropriate response because uSB flash provides portable solid-state storage without an optical mechanism.

Question 290

A technician needs to archive a small diagnostic image on removable media that laptops can read without optical drives. After the appropriate change, which observation BEST verifies the intended result?

  1. The disc mounts and the footage plays without read errors.
  2. A controlled two-member failure simulation remains accessible.
  3. The target laptop reads the archive and its checksum matches.
  4. Firmware lists the NVMe device under PCIe/NVMe storage.

Explanation

Correct Answer

C:

USB flash provides portable solid-state storage without an optical mechanism. The outcome “The target laptop reads the archive and its checksum matches.” verifies the action “Use compatible USB flash storage and verify file integrity.” for this situation: A technician needs to archive a small diagnostic image on removable media that laptops can read without optical drives.

Incorrect Answers

A:

Optical discs require a compatible optical drive. For the situation described—A technician needs to archive a small diagnostic image on removable media that laptops can read without optical drives—this would not demonstrate the specified intervention. The relevant evidence is “The target laptop reads the archive and its checksum matches.”.

B:

RAID 6 uses dual distributed parity for two-disk failure tolerance. For the situation described—A technician needs to archive a small diagnostic image on removable media that laptops can read without optical drives—this would not demonstrate the specified intervention. The relevant evidence is “The target laptop reads the archive and its checksum matches.”.

D:

Most motherboard-mounted M.2 NVMe drives use the slot for data and power. For the situation described—A technician needs to archive a small diagnostic image on removable media that laptops can read without optical drives—this would not demonstrate the specified intervention. The relevant evidence is “The target laptop reads the archive and its checksum matches.”.