McAfee-Secured Website

Exam Bundle

Exam Code: 350-401

Exam Name Implementing Cisco Enterprise Network Core Technologies (ENCOR)

Certification Provider: Cisco

Corresponding Certifications: CCIE Enterprise , CCIE Enterprise Wireless , CCNP Enterprise

Cisco 350-401 Bundle $44.99

100% Cisco 350-401 Guaranteed Success With Testking Training Materials

Get Real 350-401 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    350-401 Questions & Answers

    763 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 350-401 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 350-401 Video Course

    350-401 Video Course

    196 Video Lectures

    350-401 Video Course is developed by Cisco Professionals to help you pass the 350-401 exam.

    Description

    This course will improve your knowledge and skills required to pass Implementing Cisco Enterprise Network Core Technologies (ENCOR) exam.
  • Study Guide

    350-401 Study Guide

    636 PDF Pages

    Developed by industry experts, this 636-page guide spells out in painstaking detail all of the information you need to ace 350-401 exam.

Implementing Cisco Enterprise Network Core Technologies (ENCOR) (350-401) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    763 Questions

    $124.99
  • 350-401 Video Course

    Video Course

    196 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    636 PDF Pages

    $29.99

Cisco 350-401 Practice Test 8

Question 70

After resolving the following case, what should the engineer verify? Two SD-WAN edges have private underlay addresses behind NAT and cannot form secure site-to-site paths.

  1. Tunnel peers communicate over discovered reachable addresses despite private inside addressing.
  2. Tunnel state shows encryption active and payload captures do not reveal plaintext applications.
  3. The chosen tunnel matches the policy-selected candidate and the recorded metrics.
  4. A disabled underlay prevents its overlay tunnel despite a valid policy definition.

Explanation

Correct Answer

A:

This is the intended verification of the remedy: Confirm transport NAT traversal, control connections, and tunnel endpoint reachability. Overlay formation depends on supported transport address discovery and NAT behavior.

Incorrect Answers

B:

That observation would verify a different condition: a security reviewer needs to know whether an SD-WAN tunnel uses authenticated encryption rather than clear-text forwarding.

C:

That observation would verify a different condition: a branch edge shows two tunnels but a preferred data path never wins even when the SLA is met.

D:

That observation would verify a different condition: a vendor claims Catalyst SD-WAN replaces the need for reliable underlying IP transport.

Question 71

A network engineering team reports: A technician claims that a PAT table maps only one TCP flow to one public IP and cannot handle multiple clients. Select the most appropriate next technical step.

  1. Configure NAT overload/PAT toward the public-facing interface.
  2. Validate ownership of the virtual address and supported VRRP owner behavior.
  3. Explain the five-tuple and translated-port behavior of PAT.
  4. Set the intended HSRP priority and preemption behavior.

Explanation

Correct Answer

C:

Port translation distinguishes simultaneous sessions sharing a global address. A direct operational check is: The translation table shows multiple flows with different global port values.

Incorrect Answers

A:

That action addresses a different condition: a branch with multiple inside hosts and one public IPv4 address needs outbound internet access. PAT differentiates concurrent inside sessions using translated transport ports.

B:

That action addresses a different condition: a VRRP owner router with priority 255 is unexpectedly not recognized as master. An IP address owner has a special VRRP priority and election role.

D:

That action addresses a different condition: an HSRP design needs the WAN-connected router to be active when both devices are healthy. HSRP active selection can be guided by priority; preemption governs takeover of an existing active router.

Question 72

Two VRRP routers advertise the same group but disagree on the virtual IPv4 address. After remediation, which observation best demonstrates that the intended outcome was achieved?

  1. Inbound connections reach the intended internal server through the defined global address.
  2. An authorized master is elected and hosts continue using one virtual address.
  3. The standby becomes Active and the same virtual gateway IP remains usable.
  4. Two private hosts establish outbound sessions using the shared public address with distinct ports.

Explanation

Correct Answer

B:

This is the intended verification of the remedy: Make VRRP virtual-router ID and virtual address configuration consistent. VRRP members must agree on the virtual gateway identity.

Incorrect Answers

A:

That observation would verify a different condition: a static NAT mapping is configured but inward traffic targets the wrong public address.

C:

That observation would verify a different condition: two routers run HSRP on VLAN 40, but a user loses the default gateway when the active router fails.

D:

That observation would verify a different condition: a branch with multiple inside hosts and one public IPv4 address needs outbound internet access.

Question 73

Two directly connected eBGP peers are configured but the TCP session to port 179 is blocked. What is the best implementation or corrective action?

  1. Compare administrative distance between routing sources after BGP best-path selection.
  2. Apply an outbound BGP prefix-list or route policy on that neighbor.
  3. Filter the received default route with a targeted inbound BGP policy.
  4. Permit the required BGP TCP session between the specified neighbors.

Explanation

Correct Answer

D:

BGP uses a reliable TCP transport session before exchanging routing information. A direct operational check is: The TCP connection forms and the BGP neighbor becomes Established.

Incorrect Answers

A:

That action addresses a different condition: a router shows a BGP best path but the global RIB prefers an IGP route for the same prefix. BGP's own best path can lose installation to another routing protocol's more-preferred route.

B:

That action addresses a different condition: an enterprise must not advertise a private internal prefix to a directly connected external BGP neighbor. BGP export policy limits which routes cross an autonomous-system boundary.

C:

That action addresses a different condition: an eBGP link carries routes from a partner but an unapproved 0.0.0.0/0 is installed. Import policy prevents unwanted routes from entering local best-path selection.

Question 74

An edge switch in the fabric forwards traffic toward a remote destination and the team assumes LISP itself carries every data packet. Which action best fits the stated network condition?

  1. Identify VXLAN as the fabric encapsulation for eligible data traffic and LISP as control mapping.
  2. Preserve the endpoint's virtual-network context through fabric-edge onboarding and mapping.
  3. Use a supported fabric border handoff suited to the actual Layer 2 or Layer 3 external requirement.
  4. Inspect LISP endpoint-to-location registration and the control-plane node mapping.

Explanation

Correct Answer

A:

Control-plane endpoint registration and encapsulated transport forwarding perform distinct tasks. A direct operational check is: Captured transit packets show VXLAN transport while mapping queries identify the destination location.

Incorrect Answers

B:

That action addresses a different condition: a user moves between two SD-Access fabric edges but should retain its virtual-network assignment. Policy and location are decoupled from a specific access switch port.

C:

That action addresses a different condition: a campus operator wants to connect an isolated Layer 2-only external network to a fabric virtual network. Fabric boundary roles differ for routed versus bridged connections.

D:

That action addresses a different condition: a campus fabric edge cannot locate a host's current attachment after the host moves to another fabric switch. SD-Access separates endpoint identity from routed locator information.

Question 75

A BGP neighbor is Established but advertises no prefix because the network statement has no exact RIB match. What is the best implementation or corrective action?

  1. Install the intended exact prefix in the local routing table and correct BGP origination.
  2. Restore next-hop reachability before expecting the BGP path to install.
  3. Apply an outbound BGP prefix-list or route policy on that neighbor.
  4. Compare administrative distance between routing sources after BGP best-path selection.

Explanation

Correct Answer

A:

A BGP network statement requires a matching route in the originating router's RIB. A direct operational check is: The intended prefix appears in locally originated BGP advertisements.

Incorrect Answers

B:

That action addresses a different condition: a BGP route is in Adj-RIB-In but is invalid because the next-hop cannot be resolved. A BGP path must have a resolvable reachable next hop to be usable.

C:

That action addresses a different condition: an enterprise must not advertise a private internal prefix to a directly connected external BGP neighbor. BGP export policy limits which routes cross an autonomous-system boundary.

D:

That action addresses a different condition: a router shows a BGP best path but the global RIB prefers an IGP route for the same prefix. BGP's own best path can lose installation to another routing protocol's more-preferred route.

Question 76

A network engineering team reports: A VRF-based service has a tunnel source in the global table but tenant data in a VRF. Select the most appropriate next technical step.

  1. Remove global transport reachability and use the tenant VRF for all outer tunnel packets.
  2. Separate tunnel transport routing from the VRF of inner payload as required by the design.
  3. Run the ping with an explicit VRF context and intended source.
  4. Configure the destination route in the correct VRF address family.

Explanation

Correct Answer

B:

Underlay destination lookup and overlay tenant lookup can use different routing contexts. A direct operational check is: Outer packets follow the transport table while inner packets use the correct tenant VRF.

Incorrect Answers

A:

Forcing the outer tunnel destination into an unrelated tenant VRF can break underlay reachability. The correct design separates the underlay lookup context from the inner tenant payload lookup.

C:

That action addresses a different condition: a diagnostic ping in a tenant VRF uses the global routing table and fails. Testing in the wrong routing context can falsely indicate a tenant outage.

D:

That action addresses a different condition: a static route for a tenant was added in the global table and a VRF interface still has no path. A tenant packet does not consult an unrelated global FIB by default.

Question 77

After resolving the following case, what should the engineer verify? A router is locked to an unreachable TACACS+ group and cannot be administered during a WAN outage.

  1. An unauthorized console session cannot access user or privileged EXEC.
  2. Retired credentials fail both ordinary and fallback login tests.
  3. Normal login uses TACACS+ and a server outage permits only intended local accounts.
  4. An outage exercise validates a protected local login without broad default access.

Explanation

Correct Answer

D:

This is the intended verification of the remedy: Plan and test a scoped break-glass local AAA fallback account. Remote dependency failures should not permanently prevent authorized recovery.

Incorrect Answers

A:

That observation would verify a different condition: a switch has a console line configured for no authentication despite physical access risk.

B:

That observation would verify a different condition: a switch accepts an inactive contractor's credential because its local user has not been removed after TACACS+ rollout.

C:

That observation would verify a different condition: a branch router must use TACACS+ for administrator login with local fallback if the server becomes unreachable.

Question 78

In a Cisco ENCOR v1.2 enterprise-network scenario, an admin's authentication succeeds but privileged commands fail because AAA exec authorization is misconfigured. Which change most directly addresses the requirement?

  1. Assign the intended AAA method list to the VTY configuration.
  2. Protect privileged EXEC using appropriate enable secret and command authorization.
  3. Use an AAA login method list with TACACS+ first and local fallback.
  4. Repair the exec authorization method list and applicable line association.

Explanation

Correct Answer

D:

Authentication proves identity while authorization determines permitted session capabilities. A direct operational check is: The authorized account receives the intended privilege level and commands after login.

Incorrect Answers

A:

That action addresses a different condition: a router has a correct AAA method list named MGMT but its VTY lines use the default list. Named AAA methods only govern a line when referenced there.

B:

That action addresses a different condition: a remote office must prevent casual access to privileged EXEC from an operator who has only basic user access. Basic line access should not automatically confer high-privilege configuration powers.

C:

That action addresses a different condition: a branch router must use TACACS+ for administrator login with local fallback if the server becomes unreachable. An ordered method list provides centralized authentication and a controlled resilience path.

Question 79

Two separate PIM sparse-mode domains need their rendezvous points to exchange active-source information. After remediation, which observation best demonstrates that the intended outcome was achieved?

  1. The router shows the receiver's group membership and forwards subscribed multicast.
  2. The preferred router becomes Active after a controlled recovery and preemption event.
  3. Remote RP learns source-active information and receiver traffic crosses the domains.
  4. Routers build the expected shared-tree state and subscribed receivers receive traffic.

Explanation

Correct Answer

C:

This is the intended verification of the remedy: Use MSDP where appropriate for the separate RP domains. MSDP advertises active source information among ASM multicast domains.

Incorrect Answers

A:

That observation would verify a different condition: a multicast receiver sends IGMPv2 membership reports but traffic does not arrive because the upstream router does not know subscribers.

B:

That observation would verify a different condition: an HSRP design needs the WAN-connected router to be active when both devices are healthy.

D:

That observation would verify a different condition: an ASM PIM sparse-mode network has no reachable rendezvous point and receivers cannot discover remote sources.

Question 80

A BGP neighbor is Established but advertises no prefix because the network statement has no exact RIB match. After remediation, which observation best demonstrates that the intended outcome was achieved?

  1. The intended prefix appears in locally originated BGP advertisements.
  2. The neighbor's configured source and destination successfully establish TCP and BGP.
  3. The prefix appears as expected in the area LSDB and routing table.
  4. The BGP peer receives only the intended network advertisements after filtering.

Explanation

Correct Answer

A:

This is the intended verification of the remedy: Install the intended exact prefix in the local routing table and correct BGP origination. A BGP network statement requires a matching route in the originating router's RIB.

Incorrect Answers

B:

That observation would verify a different condition: an eBGP neighbor shows Active because its update-source is set to a loopback not reachable from the peer.

C:

That observation would verify a different condition: a new IPv4 prefix is missing from OSPF because its interface is not included in the correct process.

D:

That observation would verify a different condition: a newly connected eBGP peer receives all internal OSPF prefixes due to a broad redistribution rule.