McAfee-Secured Website

Exam Bundle

Exam Code: 350-401

Exam Name Implementing Cisco Enterprise Network Core Technologies (ENCOR)

Certification Provider: Cisco

Corresponding Certifications: CCIE Enterprise , CCIE Enterprise Wireless , CCNP Enterprise

Cisco 350-401 Bundle $44.99

100% Cisco 350-401 Guaranteed Success With Testking Training Materials

Get Real 350-401 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    350-401 Questions & Answers

    763 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 350-401 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 350-401 Video Course

    350-401 Video Course

    196 Video Lectures

    350-401 Video Course is developed by Cisco Professionals to help you pass the 350-401 exam.

    Description

    This course will improve your knowledge and skills required to pass Implementing Cisco Enterprise Network Core Technologies (ENCOR) exam.
  • Study Guide

    350-401 Study Guide

    636 PDF Pages

    Developed by industry experts, this 636-page guide spells out in painstaking detail all of the information you need to ace 350-401 exam.

Implementing Cisco Enterprise Network Core Technologies (ENCOR) (350-401) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    763 Questions

    $124.99
  • 350-401 Video Course

    Video Course

    196 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    636 PDF Pages

    $29.99

Cisco 350-401 Practice Test 5

Question 40

The network team corrects this condition: A security reviewer needs to know whether an SD-WAN tunnel uses authenticated encryption rather than clear-text forwarding. Which result would verify that the change worked?

  1. Tunnel peers communicate over discovered reachable addresses despite private inside addressing.
  2. Existing established data paths continue according to supported control and policy lifetimes.
  3. Packet captures show the application flow on the edge transport tunnel, not through controller IPs.
  4. Tunnel state shows encryption active and payload captures do not reveal plaintext applications.

Explanation

Correct Answer

D:

This is the intended verification of the remedy: Inspect established IPsec tunnel state and negotiated protection. WAN overlay tunnels protect traffic with cryptographic security on supported transports.

Incorrect Answers

A:

That observation would verify a different condition: two SD-WAN edges have private underlay addresses behind NAT and cannot form secure site-to-site paths.

B:

That observation would verify a different condition: a regional branch loses contact with the management server, but existing tunnel forwarding should not instantly stop.

C:

That observation would verify a different condition: an engineer claims encrypted branch-to-branch application packets must always transit the SD-WAN Controller.

Question 41

In a Cisco ENCOR v1.2 enterprise-network scenario, an IPv6 ACL permits TCP application traffic but Neighbor Discovery fails after an overly broad ICMPv6 deny. Which change most directly addresses the requirement?

  1. Place the specific deny before the broad permit in the ACL sequence.
  2. Design return-path permits or a stateful security control according to policy.
  3. Permit required ICMPv6 control messages consistent with the routing and security design.
  4. Add the required DNS protocol and destination-port match without opening unrelated traffic.

Explanation

Correct Answer

C:

IPv6 depends on selected ICMPv6 functions for neighbor and path operations. A direct operational check is: Neighbor discovery and intended application connectivity recover without unrestricted ICMPv6 exposure.

Incorrect Answers

A:

That action addresses a different condition: an extended IPv4 ACL denies a subnet but permits other traffic; the deny statement is placed after a broad permit. ACLs use first-match processing, so earlier broad rules can shadow later statements.

B:

That action addresses a different condition: an inbound ACL drops a valid return flow because the engineer assumed a stateless ACL tracks connections. Ordinary router ACLs match packets rather than maintaining full connection state.

D:

That action addresses a different condition: an extended ACL permits TCP/443 but DNS queries to a resolver fail on UDP/53. An HTTPS permit does not cover other required transport protocols.

Question 42

An SD-Access edge moves an endpoint to another locator while preserving its IP address. Which action best fits the stated network condition?

  1. Use the LISP endpoint ID to routing locator mapping concept.
  2. Verify overlay VNI-to-VRF and bridge-domain association rather than only underlay routing.
  3. Use a mapping lookup to resolve EID reachability to RLOC.
  4. Refresh the endpoint registration and cache state under the control-plane process.

Explanation

Correct Answer

A:

LISP decouples endpoint identifier from its current location on the transport. A direct operational check is: The same endpoint ID resolves to a new locator after registration.

Incorrect Answers

B:

That action addresses a different condition: a campus underlay routes VTEP loopbacks correctly but an endpoint cannot reach another VNI. Working IP reachability does not prove the correct tenant VNI mapping.

C:

That action addresses a different condition: a LISP router needs to know where a remote EID is reachable before sending traffic. The map system supplies locator information beyond ordinary prefix discovery.

D:

That action addresses a different condition: a LISP mapping server has stale endpoint registrations after a move and packets follow the old edge. Stale EID-to-RLOC mappings direct encapsulated traffic to an obsolete locator.

Question 43

In a Cisco ENCOR v1.2 enterprise-network scenario, a virtual network function needs direct host resource control without a general-purpose desktop OS underneath. Which change most directly addresses the requirement?

  1. Align virtual port-group tagging with the physical uplink VLAN allowance.
  2. Ensure equivalent virtual-switch port-group and network mapping on the target host.
  3. Distinguish the VM's guest routing stack from the hypervisor switching fabric.
  4. Use a type-1 hypervisor architecture for the virtualization host.

Explanation

Correct Answer

D:

A bare-metal hypervisor runs directly on hardware rather than inside a separate host OS. A direct operational check is: The virtual machine is managed by the hypervisor that owns the physical host.

Incorrect Answers

A:

That action addresses a different condition: a port group for a VM is configured on VLAN 30 but the external physical trunk does not permit VLAN 30. End-to-end VLAN carriage needs consistent tags through virtual and physical switching.

B:

That action addresses a different condition: a VM migration succeeds but the application fails because its destination host lacks the required virtual network. Live migration requires the guest's intended network connectivity to exist on the destination.

C:

That action addresses a different condition: a service router VNF restarts and the team assumes the associated virtual machine's OS has no impact on forwarding. Virtualized routing protocols still run in a guest software/control environment.

Question 44

An edge switch in the fabric forwards traffic toward a remote destination and the team assumes LISP itself carries every data packet. After remediation, which observation best demonstrates that the intended outcome was achieved?

  1. Captured transit packets show VXLAN transport while mapping queries identify the destination location.
  2. A traditional campus prefix is reachable from an authorized VN through the border path.
  3. The new edge location is registered and traffic reaches the moved endpoint without manual route insertion.
  4. Endpoint resolution continues after one control-plane node is disabled.

Explanation

Correct Answer

A:

This is the intended verification of the remedy: Identify VXLAN as the fabric encapsulation for eligible data traffic and LISP as control mapping. Control-plane endpoint registration and encapsulated transport forwarding perform distinct tasks.

Incorrect Answers

B:

That observation would verify a different condition: a remote legacy distribution block must connect to an SD-Access fabric without immediate replacement.

C:

That observation would verify a different condition: a campus fabric edge cannot locate a host's current attachment after the host moves to another fabric switch.

D:

That observation would verify a different condition: a site designs one fabric control-plane node with no redundancy despite a campus-wide availability mandate.

Question 45

A network engineering team reports: An OSPF route has an unexpected next hop via a slower WAN segment despite identical hop counts. Select the most appropriate next technical step.

  1. Configure an appropriate common OSPF auto-cost reference bandwidth on relevant routers.
  2. Consider OSPF path-type preference before comparing equal destination metrics.
  3. Permit supported equal-cost OSPF multipath and verify forwarding entries.
  4. Adjust OSPF interface cost for real path preference.

Explanation

Correct Answer

D:

OSPF chooses lower accumulated cost rather than fewest router hops. A direct operational check is: The lowest-cost path appears as the route's next hop.

Incorrect Answers

A:

That action addresses a different condition: a 1-Gbps and 10-Gbps OSPF link tie under the default reference bandwidth. The default reference bandwidth can collapse high-speed link metric distinctions.

B:

That action addresses a different condition: an OSPF route is intra-area while another is inter-area and an operator compares only raw metric. OSPF generally prefers intra-area over inter-area routes for an identical prefix.

C:

That action addresses a different condition: a branch has two equal-cost OSPF routes and wants deterministic ECMP rather than a single chosen neighbor. OSPF installs equal-cost paths when metrics and platform ECMP limits permit.

Question 46

A network engineering team reports: A VM sends packets to another VM on the same server but physical switch counters never increase. Select the most appropriate next technical step.

  1. Attach the virtual NIC to the correct vSwitch or port group.
  2. Examine physical NIC and vSwitch uplink utilization and contention.
  3. Trace the local virtual-switch forwarding path rather than the uplink.
  4. Align virtual port-group tagging with the physical uplink VLAN allowance.

Explanation

Correct Answer

C:

A virtual switch can forward same-host traffic locally without external physical egress. A direct operational check is: Both VM MAC addresses appear on the virtual switch while uplink traffic stays unchanged.

Incorrect Answers

A:

That action addresses a different condition: a virtual router interface is connected to an incorrect virtual network and sees no ARP replies. VM connectivity depends on its virtual adapter's correct Layer 2 attachment.

B:

That action addresses a different condition: a team oversubscribes one hypervisor's uplink and attributes packet loss to a routing protocol issue. Virtual ports share finite hardware throughput and can be congested without a routing failure.

D:

That action addresses a different condition: a port group for a VM is configured on VLAN 30 but the external physical trunk does not permit VLAN 30. End-to-end VLAN carriage needs consistent tags through virtual and physical switching.

Question 47

In a Cisco ENCOR v1.2 enterprise-network scenario, troubleshooting requires correlating an OSPF neighbor flap across three routers with mismatched local clocks. Which change most directly addresses the requirement?

  1. Inspect interface error counters and link state alongside protocol logs.
  2. Apply consistent syslog severity filtering and documented alert rules.
  3. Run VRF-aware ping and traceroute with explicit source selection.
  4. Verify time synchronization and collect timestamped interface and neighbor logs.

Explanation

Correct Answer

D:

Comparable timestamps make multi-device event reconstruction possible. A direct operational check is: The logs show ordered link and adjacency transitions against one time source.

Incorrect Answers

A:

That action addresses a different condition: an uplink shows intermittent CRC errors and the operator wants to prove a physical problem rather than OSPF misconfiguration. Increasing CRC/input errors point to Layer 1/2 corruption before a routing symptom.

B:

That action addresses a different condition: a syslog collector receives messages from multiple routers but cannot tell which severity classes should trigger paging. Severity classification differentiates critical faults from informational events.

C:

That action addresses a different condition: a remote router is reachable from one VRF but not another, and global ping tests produce conflicting conclusions. The routing table and source address change the path being tested.

Question 48

After resolving the following case, what should the engineer verify? An operator sees ping success but applications fail and needs the hop where traffic stops.

  1. Interface errors increase in step with adjacency losses.
  2. Only the intended VRF context succeeds and the trace identifies its next hops.
  3. The trace identifies the first missing or unexpectedly routed hop for the application path.
  4. Smaller probes pass and the threshold failure identifies a likely path MTU limit.

Explanation

Correct Answer

C:

This is the intended verification of the remedy: Run traceroute using the relevant source address and path context. Traceroute varies TTL/hop limit to identify routers along a forwarding path.

Incorrect Answers

A:

That observation would verify a different condition: an uplink shows intermittent CRC errors and the operator wants to prove a physical problem rather than OSPF misconfiguration.

B:

That observation would verify a different condition: a remote router is reachable from one VRF but not another, and global ping tests produce conflicting conclusions.

D:

That observation would verify a different condition: a path works for small ping packets but fails for large packets with the DF bit set.

Question 49

A network engineering team reports: A security reviewer needs to know whether an SD-WAN tunnel uses authenticated encryption rather than clear-text forwarding. Select the most appropriate next technical step.

  1. Inspect established IPsec tunnel state and negotiated protection.
  2. Confirm transport NAT traversal, control connections, and tunnel endpoint reachability.
  3. Distinguish the SD-WAN Manager management plane from established device data forwarding.
  4. Forward allowed data traffic directly on provisioned secure edge-to-edge tunnels.

Explanation

Correct Answer

A:

WAN overlay tunnels protect traffic with cryptographic security on supported transports. A direct operational check is: Tunnel state shows encryption active and payload captures do not reveal plaintext applications.

Incorrect Answers

B:

That action addresses a different condition: two SD-WAN edges have private underlay addresses behind NAT and cannot form secure site-to-site paths. Overlay formation depends on supported transport address discovery and NAT behavior.

C:

That action addresses a different condition: a regional branch loses contact with the management server, but existing tunnel forwarding should not instantly stop. Management reachability and packet transport have different roles in the solution.

D:

That action addresses a different condition: an engineer claims encrypted branch-to-branch application packets must always transit the SD-WAN Controller. The controller is not an obligatory central transit router for every user packet.

Question 50

After resolving the following case, what should the engineer verify? An OSPF neighbor is stuck in Init because it receives hellos but does not see its own router ID listed by the peer.

  1. The BGP peer receives only the intended network advertisements after filtering.
  2. Peer state progresses to Full after mask alignment.
  3. The peer lists the local router ID and the adjacency progresses beyond Init.
  4. Expected peers exchange hellos and reach the supported adjacency state.

Explanation

Correct Answer

C:

This is the intended verification of the remedy: Check two-way hello reception and interface network behavior for the neighbor. OSPF bidirectional discovery requires peers to see each other in hello neighbor lists.

Incorrect Answers

A:

That observation would verify a different condition: a newly connected eBGP peer receives all internal OSPF prefixes due to a broad redistribution rule.

B:

That observation would verify a different condition: two OSPF neighbors on a shared link disagree on network mask and cannot reach Full state.

D:

That observation would verify a different condition: a remote site's OSPF interface has network type NBMA and does not discover a neighbor automatically.