McAfee-Secured Website

Exam Bundle

Exam Code: 350-401

Exam Name Implementing Cisco Enterprise Network Core Technologies (ENCOR)

Certification Provider: Cisco

Corresponding Certifications: CCIE Enterprise , CCIE Enterprise Wireless , CCNP Enterprise

Cisco 350-401 Bundle $44.99

100% Cisco 350-401 Guaranteed Success With Testking Training Materials

Get Real 350-401 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    350-401 Questions & Answers

    763 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 350-401 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 350-401 Video Course

    350-401 Video Course

    196 Video Lectures

    350-401 Video Course is developed by Cisco Professionals to help you pass the 350-401 exam.

    Description

    This course will improve your knowledge and skills required to pass Implementing Cisco Enterprise Network Core Technologies (ENCOR) exam.
  • Study Guide

    350-401 Study Guide

    636 PDF Pages

    Developed by industry experts, this 636-page guide spells out in painstaking detail all of the information you need to ace 350-401 exam.

Implementing Cisco Enterprise Network Core Technologies (ENCOR) (350-401) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    763 Questions

    $124.99
  • 350-401 Video Course

    Video Course

    196 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    636 PDF Pages

    $29.99

Cisco 350-401 Practice Test 39

Question 380

A campus has OSPF routers in areas 0 and 10, but the ABR has no valid area 0 adjacency. Which action best fits the stated network condition?

  1. Restore backbone area 0 connectivity for the multi-area design.
  2. Distinguish normal-area external LSA handling from a true stub or NSSA design.
  3. Apply supported inter-area summarization on the area border router.
  4. Configure area-range summarization on the ABR for the correct area prefix.

Explanation

Correct Answer

A:

Normal inter-area OSPF routing depends on the backbone topology through area border routers. A direct operational check is: The ABR has expected area 0 neighbors and advertises area 10 reachability.

Incorrect Answers

B:

That action addresses a different condition: a test network expects an OSPF normal area to behave as a stub without an explicit stub configuration. Area type influences acceptance of external routes and ASBR behavior.

C:

That action addresses a different condition: an OSPF summary is configured on a normal internal router but has no effect on inter-area advertisements. Type-3 LSA aggregation for areas is an ABR responsibility.

D:

That action addresses a different condition: several OSPF routes in area 20 need a single advertised aggregate into area 0. An ABR can consolidate area network reachability when the summary covers intended routes.

Question 381

In a Cisco ENCOR v1.2 enterprise-network scenario, an input policy trusts DSCP markings from all public guest devices and voice traffic is starved. Which change most directly addresses the requirement?

  1. Inspect the class-map and policy-map queue treatment associated with EF traffic.
  2. Interpret traffic shaping as smoothing transmission to an administrative rate.
  3. Place a clear QoS trust boundary and classify or remark untrusted ingress traffic.
  4. Review class-map matching and policy classification order on the interface.

Explanation

Correct Answer

C:

Untrusted endpoints should not determine privileged transport treatment by self-marking. A direct operational check is: Guest-marked EF packets are remarked or classified according to the intended trust policy.

Incorrect Answers

A:

That action addresses a different condition: a voice class is marked EF but output drops show it shares a bulk data queue during congestion. Marking alone does not ensure low-latency scheduling without a matching egress policy.

B:

That action addresses a different condition: a WAN interface policy shapes all traffic to 50 Mbps while its physical line rate is 100 Mbps. A shaper buffers and schedules traffic rather than merely marking packets.

D:

That action addresses a different condition: two QoS classes both match a video packet and engineers cannot explain which action applies. Effective class selection follows the configured policy classification structure.

Question 382

In a Cisco ENCOR v1.2 enterprise-network scenario, an ACL matches more hosts than intended because its wildcard mask ignores too many high-order bits. Which change most directly addresses the requirement?

  1. Use the wildcard complement 0.0.0.255 for an exact /24 address range.
  2. Correct the source prefix and wildcard mask to the requested address set.
  3. Apply appropriate IPv6 traffic filtering for the IPv6 address family.
  4. Use an extended ACL when the policy must match a destination address.

Explanation

Correct Answer

B:

Overly broad wildcard masks expand the policy's match domain. A direct operational check is: Boundary addresses demonstrate only the intended host range is classified.

Incorrect Answers

A:

That action addresses a different condition: an IPv4 ACL wildcard mask is mistakenly specified as 255.255.255.0 for a /24 match. ACL wildcard bits use zero to require a match and one to ignore the bit.

C:

That action addresses a different condition: a router sees unexpected IPv6 inbound traffic because only an IPv4 access list is deployed. IPv4 ACLs do not automatically filter IPv6 packets.

D:

That action addresses a different condition: a new standard ACL intended to block one destination network instead blocks all packets from a source subnet. Standard IPv4 ACLs primarily classify source addresses, not destination prefixes.

Question 383

A network engineering team reports: A vendor claims Catalyst SD-WAN replaces the need for reliable underlying IP transport. Select the most appropriate next technical step.

  1. Use Catalyst SD-WAN application-aware policy with measured transport characteristics.
  2. Maintain healthy underlay connectivity and routing for each enabled WAN transport.
  3. Provide reachability and valid identity for the SD-WAN Validator function.
  4. Use SD-WAN VPN segmentation and explicit permitted inter-VPN service policy.

Explanation

Correct Answer

B:

An overlay depends on functioning physical and IP transport even with dynamic path selection. A direct operational check is: A disabled underlay prevents its overlay tunnel despite a valid policy definition.

Incorrect Answers

A:

That action addresses a different condition: a network architect needs policy-driven application steering between MPLS and broadband links. Overlay policy can select a transport based on performance requirements rather than static interface preference.

C:

That action addresses a different condition: a new Catalyst SD-WAN site must authenticate to the fabric and learn controller addresses before establishing control sessions. The validator assists initial control connection orchestration rather than carrying normal application traffic.

D:

That action addresses a different condition: an enterprise wants PCI traffic isolated from ordinary user traffic over shared WAN circuits. Logical VPNs separate routing domains even when they share physical transports.

Question 384

In a Cisco ENCOR v1.2 enterprise-network scenario, a production router accepts Telnet on VTY lines and exposes management credentials in clear text. Which change most directly addresses the requirement?

  1. Restrict VTY transport to SSH and supply appropriate host keys.
  2. Apply an access-class restriction to the VTY lines with permitted management sources.
  3. Verify SSH version, keys and supported cryptographic options under the current policy.
  4. Assign the intended AAA method list to the VTY configuration.

Explanation

Correct Answer

A:

SSH encrypts interactive management sessions unlike Telnet. A direct operational check is: SSH works for an authorized user while Telnet connections are rejected.

Incorrect Answers

B:

That action addresses a different condition: a VTY ACL is required to allow router SSH only from a designated management subnet. Line access filtering limits who can initiate management connections.

C:

That action addresses a different condition: an engineer changes the SSH domain name and RSA key without validating service after upgrade. SSH capability depends on active host keys and allowed algorithms.

D:

That action addresses a different condition: a router has a correct AAA method list named MGMT but its VTY lines use the default list. Named AAA methods only govern a line when referenced there.

Question 385

In a Cisco ENCOR v1.2 enterprise-network scenario, a VRRP owner router with priority 255 is unexpectedly not recognized as master. Which change most directly addresses the requirement?

  1. Update the NAT public pool or overload interface to a valid provider address.
  2. Configure matching HSRP group, virtual IP and active/standby participants.
  3. Set the intended HSRP priority and preemption behavior.
  4. Validate ownership of the virtual address and supported VRRP owner behavior.

Explanation

Correct Answer

D:

An IP address owner has a special VRRP priority and election role. A direct operational check is: Protocol status identifies the owner and correct backup behavior after failure.

Incorrect Answers

A:

That action addresses a different condition: a PAT router has a correct access list but the NAT pool is empty after a provider renumbering. Translated global addresses must be routable on the external network.

B:

That action addresses a different condition: two routers run HSRP on VLAN 40, but a user loses the default gateway when the active router fails. HSRP presents a shared gateway that can move between eligible devices.

C:

That action addresses a different condition: an HSRP design needs the WAN-connected router to be active when both devices are healthy. HSRP active selection can be guided by priority; preemption governs takeover of an existing active router.

Question 386

A newly connected eBGP peer receives all internal OSPF prefixes due to a broad redistribution rule. What is the best implementation or corrective action?

  1. Apply intentional BGP origination and export filters to limit the redistributed routes.
  2. Constrain BGP advertisements with outbound policy and audit the exact allowed set.
  3. Apply an outbound BGP prefix-list or route policy on that neighbor.
  4. Apply an inbound prefix-list with explicit allowed prefix lengths for that neighbor.

Explanation

Correct Answer

A:

Routing-domain redistribution should have explicit policy boundaries. A direct operational check is: The BGP peer receives only the intended network advertisements after filtering.

Incorrect Answers

B:

That action addresses a different condition: an eBGP router unexpectedly sends RFC1918 routes to a public peer after a redistribution change. Uncontrolled redistribution can leak internal addressing across an external boundary.

C:

That action addresses a different condition: an enterprise must not advertise a private internal prefix to a directly connected external BGP neighbor. BGP export policy limits which routes cross an autonomous-system boundary.

D:

That action addresses a different condition: a directly connected eBGP session is stable but one peer wants to stop accepting an unexpectedly broad /8 route. BGP import filtering can prevent oversized or unauthorized routes from influencing forwarding.

Question 387

A downstream switch becomes the RSTP root although the distribution core should own the root role. What is the best implementation or corrective action?

  1. Enable root guard on the appropriate designated-facing port.
  2. Set a lower bridge priority on the intended root bridge for the correct VLAN or instance.
  3. Adjust root priority for root selection and path cost for best-path selection separately.
  4. Migrate to a planned MST region with VLAN-to-instance mapping.

Explanation

Correct Answer

B:

STP elects the bridge with the lowest bridge ID, not the highest port speed. A direct operational check is: The intended distribution switch shows itself as root and access links have expected roles.

Incorrect Answers

A:

That action addresses a different condition: a switch receives a superior BPDU from an unauthorized downstream device and the network root moves. Root guard protects the designed root placement against superior downstream BPDUs.

C:

That action addresses a different condition: an engineer expects changing an STP port cost on one switch to always override root bridge election. Root bridge election uses bridge IDs; path selection uses cumulative root-path cost.

D:

That action addresses a different condition: a trunk carrying dozens of VLANs has too many separate per-VLAN spanning-tree instances for operational goals. MST groups VLANs into a smaller number of spanning-tree instances.

Question 388

A script uses a Cisco DNA Center legacy URL path and receives a resource-not-found response on a current platform. After remediation, which observation best demonstrates that the intended outcome was achieved?

  1. The integration receives structured JSON with stable documented identifiers.
  2. The returned task transitions to completed or failed with appropriate detail.
  3. The API returns the expected SD-WAN policy object from the correct manager.
  4. The current documented endpoint returns the intended dataset.

Explanation

Correct Answer

D:

This is the intended verification of the remedy: Check Catalyst Center API documentation and use the supported endpoint path. Controller API paths and product branding may change across versions.

Incorrect Answers

A:

That observation would verify a different condition: an engineer tries to obtain the current network device inventory by scraping HTML table labels from the manager UI.

B:

That observation would verify a different condition: a client receives an asynchronous job identifier after requesting a Catalyst Center operation and assumes it is already complete.

C:

That observation would verify a different condition: an orchestration tool needs application-route policy information from a Catalyst SD-WAN deployment.

Question 389

The network team corrects this condition: Two core switches share one chassis power feed, and a building outage must not take both down. Which result would verify that the change worked?

  1. A single approved segmentation change produces consistent edge enforcement across sites.
  2. Failure analysis documents whether a common software fault can disable both paths.
  3. A planned single-feed failure leaves a separate routed core path operational.
  4. Diagrams show access switches uplinked to a resilient collapsed-core pair.

Explanation

Correct Answer

C:

This is the intended verification of the remedy: Place redundant core devices on independent power and physical paths. Logical redundancy is ineffective if both paths share a physical failure domain.

Incorrect Answers

A:

That observation would verify a different condition: an enterprise wants a common policy plane spanning campus, branch, and cloud instead of per-switch manual ACL drift.

B:

That observation would verify a different condition: two distribution switches form one logical access gateway, but a single control-plane defect could affect both.

D:

That observation would verify a different condition: a branch has only two access switches and one uplink pair; a dedicated core would add unnecessary complexity.

Question 390

A Python integration needs device inventory from Catalyst Center but keeps issuing CLI SSH commands to every switch. Which action best fits the stated network condition?

  1. Acquire a supported authentication token before invoking protected APIs.
  2. Poll the supported task or job-status endpoint until the operation reaches terminal state.
  3. Implement API pagination or offsets according to the documented response contract.
  4. Call the supported Catalyst Center inventory REST endpoint with authorized credentials.

Explanation

Correct Answer

D:

Controller APIs can provide centralized inventory data to automation clients. A direct operational check is: The API returns managed devices and identifiers without one SSH session per device.

Incorrect Answers

A:

That action addresses a different condition: an automation workflow cannot authenticate to Catalyst Center because it skips obtaining the required token. Controller endpoints often require an authenticated session or token.

B:

That action addresses a different condition: a client receives an asynchronous job identifier after requesting a Catalyst Center operation and assumes it is already complete. Many controller actions are asynchronous and initial acceptance is not final completion.

C:

That action addresses a different condition: a team lists 1000 devices through a paginated controller API but reads only the first page. Paged APIs return a subset of total matching records on each call.