McAfee-Secured Website

Exam Bundle

Exam Code: 350-401

Exam Name Implementing Cisco Enterprise Network Core Technologies (ENCOR)

Certification Provider: Cisco

Corresponding Certifications: CCIE Enterprise , CCIE Enterprise Wireless , CCNP Enterprise

Cisco 350-401 Bundle $44.99

100% Cisco 350-401 Guaranteed Success With Testking Training Materials

Get Real 350-401 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    350-401 Questions & Answers

    763 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 350-401 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 350-401 Video Course

    350-401 Video Course

    196 Video Lectures

    350-401 Video Course is developed by Cisco Professionals to help you pass the 350-401 exam.

    Description

    This course will improve your knowledge and skills required to pass Implementing Cisco Enterprise Network Core Technologies (ENCOR) exam.
  • Study Guide

    350-401 Study Guide

    636 PDF Pages

    Developed by industry experts, this 636-page guide spells out in painstaking detail all of the information you need to ace 350-401 exam.

Implementing Cisco Enterprise Network Core Technologies (ENCOR) (350-401) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    763 Questions

    $124.99
  • 350-401 Video Course

    Video Course

    196 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    636 PDF Pages

    $29.99

Cisco 350-401 Practice Test 31

Question 300

Two distribution switches form one logical access gateway, but a single control-plane defect could affect both. Which action best fits the stated network condition?

  1. Evaluate shared-control-plane risk against independent-chassis redundancy.
  2. Place redundant core devices on independent power and physical paths.
  3. Use platform-supported stateful switchover between redundant supervisors.
  4. Deploy a suitable first-hop redundancy protocol with a second gateway-capable device.

Explanation

Correct Answer

A:

A logical pair simplifies operation but can enlarge the failure domain of control software. A direct operational check is: Failure analysis documents whether a common software fault can disable both paths.

Incorrect Answers

B:

That action addresses a different condition: two core switches share one chassis power feed, and a building outage must not take both down. Logical redundancy is ineffective if both paths share a physical failure domain.

C:

That action addresses a different condition: a pair of modular switches must preserve a control-plane session through supervisor failure without whole-chassis reconvergence. SSO synchronizes active and standby control state to reduce a supervisor switchover impact.

D:

That action addresses a different condition: a distribution switch reloads during an upgrade, and access devices should retain a default gateway with minimal interruption. FHRP moves the active gateway role to a surviving device after a failure.

Question 301

A pair of modular switches must preserve a control-plane session through supervisor failure without whole-chassis reconvergence. Which action best fits the stated network condition?

  1. Provide redundant forwarding paths with correct routing convergence and ECMP where applicable.
  2. Place redundant core devices on independent power and physical paths.
  3. Use platform-supported stateful switchover between redundant supervisors.
  4. Evaluate shared-control-plane risk against independent-chassis redundancy.

Explanation

Correct Answer

C:

SSO synchronizes active and standby control state to reduce a supervisor switchover impact. A direct operational check is: A standby supervisor takes over and forwarding remains stable in the supported fault test.

Incorrect Answers

A:

That action addresses a different condition: two equal-cost physical uplinks feed one WAN edge, but one route is lost whenever a single link fails. A network needs independent next hops, not merely physically duplicated cables.

B:

That action addresses a different condition: two core switches share one chassis power feed, and a building outage must not take both down. Logical redundancy is ineffective if both paths share a physical failure domain.

D:

That action addresses a different condition: two distribution switches form one logical access gateway, but a single control-plane defect could affect both. A logical pair simplifies operation but can enlarge the failure domain of control software.

Question 302

After resolving the following case, what should the engineer verify? A remote branch has unstable power and cannot host large local network controllers.

  1. Normal local east-west traffic stays local rather than crossing the WAN twice.
  2. A single approved segmentation change produces consistent edge enforcement across sites.
  3. The private application is reachable only from authorized network segments or identities.
  4. During controller loss, previously authorized local traffic follows the intended survival mode.

Explanation

Correct Answer

D:

This is the intended verification of the remedy: Select controller reachability and device autonomy according to branch failure requirements. Centralized management can coexist with local forwarding when the design supports isolation.

Incorrect Answers

A:

That observation would verify a different condition: a data center interconnect path has excessive latency, and the architect proposes a remote first-hop gateway for all campus users.

B:

That observation would verify a different condition: an enterprise wants a common policy plane spanning campus, branch, and cloud instead of per-switch manual ACL drift.

C:

That observation would verify a different condition: an enterprise moves a customer application to cloud but cannot expose internal-only services to unrestricted internet traffic.

Question 303

After resolving the following case, what should the engineer verify? Two departments share a campus infrastructure but must enforce distinct group-based policies when users move between ports.

  1. A noncompliant test endpoint lacks protected service access while healthy endpoints remain authorized.
  2. A blocked application is denied even when it uses an otherwise permitted port.
  3. The permitted SGT pair passes after matrix update while unapproved pairs remain denied.
  4. An authorized group pair communicates and a disallowed group pair remains blocked after a move.

Explanation

Correct Answer

D:

This is the intended verification of the remedy: Use Cisco TrustSec group-based access with appropriate SGT classification and policy. Security group tags decouple access decisions from individual IP or switch-port locations.

Incorrect Answers

A:

That observation would verify a different condition: endpoint compromise spreads because unmanaged hosts can connect to sensitive service segments.

B:

That observation would verify a different condition: a network must inspect application-layer behavior rather than only source and destination ports.

C:

That observation would verify a different condition: a TrustSec deployment assigns correct SGTs but packets are denied because the matrix lacks their permitted relationship.

Question 304

A TACACS+ server is reachable but requests are silently dropped due to a mismatched shared secret. What is the best implementation or corrective action?

  1. Use an AAA login method list with TACACS+ first and local fallback.
  2. Correct the AAA server key and verify source-interface reachability.
  3. Configure the intended source interface and permit its path to the AAA service.
  4. Distinguish an authentication reject from a server error in AAA method processing.

Explanation

Correct Answer

B:

The client and backend must share compatible authentication parameters for valid AAA exchanges. A direct operational check is: The server processes the device request and login succeeds with valid credentials.

Incorrect Answers

A:

That action addresses a different condition: a branch router must use TACACS+ for administrator login with local fallback if the server becomes unreachable. An ordered method list provides centralized authentication and a controlled resilience path.

C:

That action addresses a different condition: a router's AAA server uses a loopback source address not permitted by the network ACL. AAA reachability depends on the actual packet source address and return route.

D:

That action addresses a different condition: an administrator assumes local fallback always occurs when TACACS+ explicitly rejects valid credentials. AAA normally falls through on a method error, not when the first method returns an authoritative failure.

Question 305

An API client receives HTTP 404 from a RESTCONF URL that omitted the correct API root. What is the best implementation or corrective action?

  1. Use the correct RESTCONF resource path and enabled service endpoint.
  2. Use the supported RESTCONF media type for YANG-encoded JSON content.
  3. Inspect the NETCONF hello capabilities and target the supported running datastore.
  4. Enable the supported NETCONF-YANG service with valid SSH reachability and credentials.

Explanation

Correct Answer

A:

RESTCONF is a resource-oriented API and path shape determines data availability. A direct operational check is: GET to the corrected data resource returns the expected representation.

Incorrect Answers

B:

That action addresses a different condition: a RESTCONF client submits JSON data but uses a generic text/plain content type and receives a media error. RESTCONF expects suitable content negotiation for structured YANG resources.

C:

That action addresses a different condition: an IOS XE NETCONF client sends edit-config to the candidate datastore but the device advertises only writable-running capability. NETCONF datastore support is determined by server-advertised capabilities; candidate/commit are not universal on IOS XE.

D:

That action addresses a different condition: an IOS XE switch is configured for NETCONF but no SSH connection can reach TCP port 830. NETCONF commonly runs over SSH with a dedicated management port.

Question 306

A network engineering team reports: One BGP path has higher local preference but a longer AS_PATH than another route. Select the most appropriate next technical step.

  1. Select the higher-local-preference path under normal BGP best-path ordering.
  2. Prefer the path with the shorter eligible AS_PATH after higher-priority attributes tie.
  3. Compare administrative distance between routing sources after BGP best-path selection.
  4. Check best-path comparison ordering and whether MED is eligible for comparison across the paths.

Explanation

Correct Answer

A:

Local preference is evaluated before AS_PATH length for eligible paths. A direct operational check is: The longer-AS_PATH path with higher local preference becomes best within the AS.

Incorrect Answers

B:

That action addresses a different condition: two candidate BGP routes have equal local preference but different AS_PATH lengths. BGP compares path attributes in an ordered best-path process.

C:

That action addresses a different condition: a router shows a BGP best path but the global RIB prefers an IGP route for the same prefix. BGP's own best path can lose installation to another routing protocol's more-preferred route.

D:

That action addresses a different condition: two equal-length BGP paths arrive from separate neighboring ASNs with differing MED values; an engineer claims MED must always decide. MED is not universally compared across distinct neighboring ASNs by default on many BGP implementations.

Question 307

An IPv6 interface must exchange OSPF while its IPv4 OSPF process remains unchanged. Select the strongest practical acceptance evidence.

  1. Link-local OSPFv3 neighbor messages appear and routes form.
  2. Periodic hellos result in an established neighbor relationship after correction.
  3. The IPv6 OSPF neighbor reaches Full and IPv6 routes install.
  4. The subnet remains in LSAs while no OSPF hello packets leave the user port.

Explanation

Correct Answer

C:

This is the intended verification of the remedy: Enable OSPFv3 for the IPv6 address family on the correct interface and process. OSPFv3 supports IPv6 routing adjacencies distinct from OSPFv2 IPv4 configuration.

Incorrect Answers

A:

That observation would verify a different condition: an OSPFv3 IPv6 adjacency remains down despite valid global IPv6 addresses because IPv6 transport is disabled.

B:

That observation would verify a different condition: an OSPF adjacency remains Down because two directly connected interfaces use mismatched hello intervals.

D:

That observation would verify a different condition: a stub campus interface must advertise its connected subnet but should not exchange OSPF hellos with hosts.

Question 308

An RSTP topology changes and an alternate port must start forwarding quickly. What is the best implementation or corrective action?

  1. Remove edge treatment from the transit port and allow normal RSTP roles.
  2. Use RSTP with appropriate point-to-point neighbor agreement and link type.
  3. Check RSTP topology-change processing and MAC address flushing on affected VLANs.
  4. Verify intended RSTP port roles and path costs before changing the topology.

Explanation

Correct Answer

B:

RSTP uses alternate roles and proposal/agreement for faster convergence on point-to-point links. A direct operational check is: The alternate path transitions to forwarding promptly after the active uplink fails.

Incorrect Answers

A:

That action addresses a different condition: an engineer enables PortFast on a switch-to-switch transit without confirming the topology. PortFast is intended for edge links that should not participate in looped transit.

C:

That action addresses a different condition: a fiber fault causes sudden topology changes but users still see stale MAC forwarding between two access switches. Topology changes require switches to relearn moved MAC locations promptly.

D:

That action addresses a different condition: an access switch has one uplink blocked by STP and an operator calls it a failure although the alternative uplink is forwarding. An alternate port may be a healthy loop-prevention path, not a broken physical link.

Question 309

Two equal-cost physical uplinks feed one WAN edge, but one route is lost whenever a single link fails. Select the strongest practical acceptance evidence.

  1. Diagrams show access switches uplinked to a resilient collapsed-core pair.
  2. Routing table and probe results show service through the surviving uplink after isolation.
  3. Branch diagrams and routing advertisements follow the common, reviewable site pattern.
  4. Failure analysis documents whether a common software fault can disable both paths.

Explanation

Correct Answer

B:

This is the intended verification of the remedy: Provide redundant forwarding paths with correct routing convergence and ECMP where applicable. A network needs independent next hops, not merely physically duplicated cables.

Incorrect Answers

A:

That observation would verify a different condition: a branch has only two access switches and one uplink pair; a dedicated core would add unnecessary complexity.

C:

That observation would verify a different condition: a network build uses inconsistent naming, routing summarization and failure domains across every branch.

D:

That observation would verify a different condition: two distribution switches form one logical access gateway, but a single control-plane defect could affect both.

Question 310

A SPAN destination port is used for ordinary user traffic and its host suddenly loses network access. What is the best implementation or corrective action?

  1. Dedicate the configured SPAN destination to monitoring rather than normal forwarding.
  2. Configure a local SPAN session with the correct source and destination interfaces.
  3. Configure RSPAN with supported source, transit RSPAN VLAN, and destination sessions.
  4. Use ERSPAN with configured routed tunnel source and destination endpoints.

Explanation

Correct Answer

A:

A SPAN monitor destination is not an ordinary production switchport. A direct operational check is: The capture interface receives mirrored frames while no longer acting as a normal user port.

Incorrect Answers

B:

That action addresses a different condition: an operations team needs to mirror one switch port to a local packet analyzer for troubleshooting. Local SPAN copies selected traffic to a monitor port on the same device.

C:

That action addresses a different condition: a security probe on a different switch must inspect the traffic of a remote campus access port over a dedicated monitor VLAN. RSPAN transports mirrored traffic through a special Layer 2 VLAN to another switch.

D:

That action addresses a different condition: a monitoring system in a routed network needs copies of packets from a distant switch without Layer 2 RSPAN continuity. ERSPAN encapsulates mirrored packets for transport over Layer 3 connectivity.