McAfee-Secured Website

Exam Bundle

Exam Code: 350-401

Exam Name Implementing Cisco Enterprise Network Core Technologies (ENCOR)

Certification Provider: Cisco

Corresponding Certifications: CCIE Enterprise , CCIE Enterprise Wireless , CCNP Enterprise

Cisco 350-401 Bundle $44.99

100% Cisco 350-401 Guaranteed Success With Testking Training Materials

Get Real 350-401 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    350-401 Questions & Answers

    763 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 350-401 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 350-401 Video Course

    350-401 Video Course

    196 Video Lectures

    350-401 Video Course is developed by Cisco Professionals to help you pass the 350-401 exam.

    Description

    This course will improve your knowledge and skills required to pass Implementing Cisco Enterprise Network Core Technologies (ENCOR) exam.
  • Study Guide

    350-401 Study Guide

    636 PDF Pages

    Developed by industry experts, this 636-page guide spells out in painstaking detail all of the information you need to ace 350-401 exam.

Implementing Cisco Enterprise Network Core Technologies (ENCOR) (350-401) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    763 Questions

    $124.99
  • 350-401 Video Course

    Video Course

    196 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    636 PDF Pages

    $29.99

Cisco 350-401 Practice Test 24

Question 230

A REST API client receives HTTP 200 and assumes a configuration change was created, but the payload describes a read result. What is the best implementation or corrective action?

  1. Correct the request payload syntax and constraints before retrying.
  2. Recognize 204 as success with no response body and verify by a separate read.
  3. Honor rate limiting and retry-after guidance using backoff.
  4. Interpret status code together with the operation and response body.

Explanation

Correct Answer

D:

A successful HTTP response is not by itself proof that the intended configuration changed. A direct operational check is: The follow-up GET confirms the desired setting rather than inferring state from 200 alone.

Incorrect Answers

A:

That action addresses a different condition: an API request fails with HTTP 400 because a field violates the controller's validation schema. HTTP 400 generally means the client request is malformed or unacceptable.

B:

That action addresses a different condition: a RESTCONF update returns HTTP 204 No Content and a developer treats the empty body as a failure. A no-content success is normal for certain update and delete operations.

C:

That action addresses a different condition: an API responds with HTTP 429 after an automation loop sends a burst of requests. 429 indicates excessive request rate rather than invalid object configuration.

Question 231

After resolving the following case, what should the engineer verify? A controller API has separate users for operations and compliance reporting, but both use one unrestricted token.

  1. Requests using the old token fail while authorized integration works with the replacement.
  2. The client refuses an unapproved redirect and never sends its token there.
  3. The reporting token cannot change configurations and actions are tied to its identity.
  4. Excess requests are throttled while normal authorized requests complete.

Explanation

Correct Answer

C:

This is the intended verification of the remedy: Issue scoped credentials and audit identities by integration role. Separating API principals limits lateral impact and supports attribution.

Incorrect Answers

A:

That observation would verify a different condition: a network application embeds its administrator API token in a public code repository.

B:

That observation would verify a different condition: an API integration follows a redirect from the trusted controller to an unknown hostname and forwards a bearer token.

D:

That observation would verify a different condition: a REST API endpoint allows unlimited anonymous requests and CPU spikes during automated scans.

Question 232

The network team corrects this condition: A GRE tunnel carries packets larger than the carrier MTU and applications stall on large transfers. Which result would verify that the change worked?

  1. The tunnel endpoint resolves over the physical underlay instead of the tunnel interface.
  2. Encrypt and decrypt counters increment in the expected directions during test traffic.
  3. The tunnel carries protected traffic with active IPsec security associations.
  4. Large application segments pass without repeated fragmentation or blackholing.

Explanation

Correct Answer

D:

This is the intended verification of the remedy: Adjust MTU and TCP MSS or path-MTU handling for encapsulation overhead. GRE and IPsec headers reduce available payload size in a fixed-MTU underlay.

Incorrect Answers

A:

That observation would verify a different condition: an overlay GRE interface has a route to its own tunnel destination through the tunnel.

B:

That observation would verify a different condition: an operations team wants to confirm that encrypted tunnel packets are actually transmitted, not just configured.

C:

That observation would verify a different condition: an engineer assumes a plain GRE tunnel encrypts sensitive client data.

Question 233

After resolving the following case, what should the engineer verify? A Python script loops through device addresses but stops after the first because return is inside the loop.

  1. The parser returns the named device field without a KeyError.
  2. All devices produce results before the function returns its collection.
  3. The loop sends one request per intended complete IPv4 address.
  4. A caller receives the route value and can compare it in an assertion.

Explanation

Correct Answer

B:

This is the intended verification of the remedy: Move the return statement outside the for loop after all devices are processed. A return exits the function immediately and can prematurely terminate iteration.

Incorrect Answers

A:

That observation would verify a different condition: an automation script uses a Python dictionary but tries to read it as an array with a numeric index.

C:

That observation would verify a different condition: a script iterates over a string of addresses and inadvertently processes each character as a separate host.

D:

That observation would verify a different condition: a Python function called parse_routes prints a route but the caller receives None and cannot test it.

Question 234

In a Cisco ENCOR v1.2 enterprise-network scenario, several OSPF routes in area 20 need a single advertised aggregate into area 0. Which change most directly addresses the requirement?

  1. Configure area-range summarization on the ABR for the correct area prefix.
  2. Distinguish normal-area external LSA handling from a true stub or NSSA design.
  3. Restore backbone area 0 connectivity for the multi-area design.
  4. Match the configured OSPF area on the shared adjacency.

Explanation

Correct Answer

A:

An ABR can consolidate area network reachability when the summary covers intended routes. A direct operational check is: The backbone sees the planned aggregate and no unrelated prefixes are included.

Incorrect Answers

B:

That action addresses a different condition: a test network expects an OSPF normal area to behave as a stub without an explicit stub configuration. Area type influences acceptance of external routes and ASBR behavior.

C:

That action addresses a different condition: a campus has OSPF routers in areas 0 and 10, but the ABR has no valid area 0 adjacency. Normal inter-area OSPF routing depends on the backbone topology through area border routers.

D:

That action addresses a different condition: two OSPF neighbors are on the same Ethernet VLAN but one has a different area ID. OSPF peers do not form a normal adjacency across an area mismatch on one link.

Question 235

A 1-Gbps and 10-Gbps OSPF link tie under the default reference bandwidth. Which action best fits the stated network condition?

  1. Use appropriate OSPF network type on links that are truly point-to-point.
  2. Configure an appropriate common OSPF auto-cost reference bandwidth on relevant routers.
  3. Permit supported equal-cost OSPF multipath and verify forwarding entries.
  4. Adjust OSPF interface cost for real path preference.

Explanation

Correct Answer

B:

The default reference bandwidth can collapse high-speed link metric distinctions. A direct operational check is: The 10-Gbps link receives a lower interface cost than the 1-Gbps path.

Incorrect Answers

A:

That action addresses a different condition: an OSPF area on broadcast Ethernet elects a DR and BDR, while the design expects point-to-point adjacency behavior. Broadcast networks support DR/BDR election while point-to-point network type does not.

C:

That action addresses a different condition: a branch has two equal-cost OSPF routes and wants deterministic ECMP rather than a single chosen neighbor. OSPF installs equal-cost paths when metrics and platform ECMP limits permit.

D:

That action addresses a different condition: an OSPF route has an unexpected next hop via a slower WAN segment despite identical hop counts. OSPF chooses lower accumulated cost rather than fewest router hops.

Question 236

The network team corrects this condition: Designers want fast recovery across a pair of campus links but both fiber routes share one conduit. Which result would verify that the change worked?

  1. Normal local east-west traffic stays local rather than crossing the WAN twice.
  2. Failure analysis documents whether a common software fault can disable both paths.
  3. A simulated conduit outage removes only one of the two required physical paths.
  4. A planned single-feed failure leaves a separate routed core path operational.

Explanation

Correct Answer

C:

This is the intended verification of the remedy: Require physically diverse paths for the high-availability links. A shared trench is a single point of failure despite dual interfaces.

Incorrect Answers

A:

That observation would verify a different condition: a data center interconnect path has excessive latency, and the architect proposes a remote first-hop gateway for all campus users.

B:

That observation would verify a different condition: two distribution switches form one logical access gateway, but a single control-plane defect could affect both.

D:

That observation would verify a different condition: two core switches share one chassis power feed, and a building outage must not take both down.

Question 237

A TACACS+ server is reachable but requests are silently dropped due to a mismatched shared secret. Select the strongest practical acceptance evidence.

  1. Retired credentials fail both ordinary and fallback login tests.
  2. The server processes the device request and login succeeds with valid credentials.
  3. Normal login uses TACACS+ and a server outage permits only intended local accounts.
  4. Rejected server credentials do not automatically bypass policy to a local user.

Explanation

Correct Answer

B:

This is the intended verification of the remedy: Correct the AAA server key and verify source-interface reachability. The client and backend must share compatible authentication parameters for valid AAA exchanges.

Incorrect Answers

A:

That observation would verify a different condition: a switch accepts an inactive contractor's credential because its local user has not been removed after TACACS+ rollout.

C:

That observation would verify a different condition: a branch router must use TACACS+ for administrator login with local fallback if the server becomes unreachable.

D:

That observation would verify a different condition: an administrator assumes local fallback always occurs when TACACS+ explicitly rejects valid credentials.

Question 238

In a Cisco ENCOR v1.2 enterprise-network scenario, a collector cannot interpret custom flow fields because the device uses an incompatible export format. Which change most directly addresses the requirement?

  1. Select a compatible supported export version/template for the collector.
  2. Place flow monitoring on the interface and direction actually traversed by that traffic.
  3. Define the required match fields in the Flexible NetFlow record.
  4. Configure and verify a Flexible NetFlow exporter on the applied monitor.

Explanation

Correct Answer

A:

Template-based NetFlow exports communicate the layout of custom flow records. A direct operational check is: The collector parses source/destination fields using the received template.

Incorrect Answers

B:

That action addresses a different condition: an operator sees zero byte counters for a particular app because its traffic bypasses the monitored routed interface. Observability depends on capturing the real packet path rather than a convenient interface.

C:

That action addresses a different condition: a team needs to include source IPv4, destination IPv4, and transport ports in a custom flow record. Flow keys determine how observed packets are grouped into conversations.

D:

That action addresses a different condition: an interface records flows but the collector sees no exports and the team assumes the monitor is sufficient. A record and monitor alone do not send telemetry to a collector.

Question 239

A network engineering team reports: A team needs to include source IPv4, destination IPv4, and transport ports in a custom flow record. Select the most appropriate next technical step.

  1. Apply the Flexible NetFlow monitor in the appropriate input direction.
  2. Configure and verify a Flexible NetFlow exporter on the applied monitor.
  3. Define the required match fields in the Flexible NetFlow record.
  4. Apply the monitor to the required interface and direction.

Explanation

Correct Answer

C:

Flow keys determine how observed packets are grouped into conversations. A direct operational check is: The flow record displays exactly the selected key fields.

Incorrect Answers

A:

That action addresses a different condition: an analyst monitors egress but requires per-ingress conversation visibility for a campus VLAN uplink. Input and output monitors observe traffic at different points in forwarding.

B:

That action addresses a different condition: an interface records flows but the collector sees no exports and the team assumes the monitor is sufficient. A record and monitor alone do not send telemetry to a collector.

D:

That action addresses a different condition: a NetFlow monitor uses an exporter and record but has not been attached to any traffic interface. Flexible NetFlow only observes packets on interfaces where its monitor is enabled.

Question 240

A GRE tunnel interface is administratively up but the remote tunnel destination has no route. Which action best fits the stated network condition?

  1. Check IPsec SA packet counters and tunnel interface encapsulation counters.
  2. Restore underlay reachability to the configured GRE tunnel destination.
  3. Add appropriate IPsec protection for GRE traffic before carrying sensitive payloads.
  4. Configure the destination route in the correct VRF address family.

Explanation

Correct Answer

B:

GRE encapsulation still relies on routable outer IP endpoints. A direct operational check is: The tunnel destination responds through an underlay route and inner probes work.

Incorrect Answers

A:

That action addresses a different condition: an operations team wants to confirm that encrypted tunnel packets are actually transmitted, not just configured. Traffic and security-association counters demonstrate active encrypted forwarding.

C:

That action addresses a different condition: an engineer assumes a plain GRE tunnel encrypts sensitive client data. GRE provides encapsulation but not confidentiality by itself.

D:

That action addresses a different condition: a static route for a tenant was added in the global table and a VRF interface still has no path. A tenant packet does not consult an unrelated global FIB by default.