McAfee-Secured Website

Exam Bundle

Exam Code: 200-301

Exam Name Cisco Certified Network Associate (CCNA)

Certification Provider: Cisco

Corresponding Certification: CCNA

Cisco 200-301 Bundle $44.99

100% Cisco 200-301 Guaranteed Success With Testking Training Materials

Get Real 200-301 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    200-301 Questions & Answers

    760 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 200-301 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 200-301 Video Course

    200-301 Video Course

    271 Video Lectures

    200-301 Video Course is developed by Cisco Professionals to help you pass the 200-301 exam.

    Description

    This course will improve your knowledge and skills required to pass Cisco Certified Network Associate (CCNA) exam.
  • Study Guide

    200-301 Study Guide

    1969 PDF Pages

    Developed by industry experts, this 1969-page guide spells out in painstaking detail all of the information you need to ace 200-301 exam.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    760 Questions

    $124.99
  • 200-301 Video Course

    Video Course

    271 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1969 PDF Pages

    $29.99

Cisco 200-301 Practice Test 85

Question 840

A named extended ACL called BLOCK-TELNET has been created. Which command attaches it to interface Gi0/1 in the inbound direction?

  1. router ospf BLOCK-TELNET
  2. ip access-class BLOCK-TELNET in under Gi0/1
  3. switchport access vlan BLOCK-TELNET
  4. ip access-group BLOCK-TELNET in

Explanation

Correct Answer

D:

The interface command references the named IPv4 ACL and checks packets as they arrive.

Incorrect Answers

A:

The OSPF process command is unrelated to attaching an IPv4 access list.

B:

Access-class is a VTY management-line filter, not the interface attachment syntax.

C:

VLAN assignment cannot reference a named routed IP ACL this way.

Question 841

A branch must drop outbound TCP destination port 25 from user VLAN 17 to a remote mail relay, saving WAN bandwidth, but allow HTTPS from the same users. Where should an extended ACL generally be applied?

  1. As a standard ACL denying the entire source subnet
  2. As a DHCP snooping VLAN trust setting
  3. After the WAN link at the far destination only
  4. Near the source LAN interface with the relevant destination and TCP port match

Explanation

Correct Answer

D:

Early filtering of only prohibited TCP/25 traffic conserves WAN capacity without blocking permitted HTTPS.

Incorrect Answers

A:

A standard source-only deny would also block the HTTPS sessions that must remain permitted.

B:

DHCP snooping does not filter transit TCP destinations and ports.

C:

Dropping only at the far end wastes the WAN capacity the policy intended to save.

Question 842

A new ACL contains sequence 5 `permit ip any any` followed by sequence 10 `deny tcp any any eq 23`. What makes the Telnet deny ineffective for matching IPv4 packets?

  1. The deny has a numerically smaller sequence number than the permit.
  2. A deny statement is never permitted inside an extended ACL.
  3. The broad first permit matches Telnet before the later deny is evaluated.
  4. TCP port 23 is an invalid ACL port number.

Explanation

Correct Answer

C:

ACLs stop at the earliest matching ACE; permit ip any any shadows the later traffic-specific deny.

Incorrect Answers

A:

Sequence 10 is numerically greater than 5, but that only matters for order.

B:

Extended ACLs routinely include deny actions for specified traffic.

D:

TCP port 23 is valid and traditionally used for Telnet.

Question 843

An engineer intends to block inbound SSH from 10.70.7.0/24 to server 10.80.8.8, but writes `deny tcp host 10.80.8.8 10.70.7.0 0.0.0.255 eq 22`. What is wrong?

  1. A deny ACE must always be after every permit ACE.
  2. The wildcard must be the positive subnet mask 255.255.255.0.
  3. The source and destination positions are reversed.
  4. The command is invalid solely because 22 is not a TCP port.

Explanation

Correct Answer

C:

Extended ACL operands specify source then destination, so the rule would match server-to-client traffic instead of intended client-to-server flows.

Incorrect Answers

A:

Deny and permit relative ordering depends on specific requirements, not an absolute deny-last rule.

B:

Wildcard masks are inverse, not positive subnet masks; 0.0.0.255 is correct for /24.

D:

Port 22 is a valid TCP destination port used by SSH.

Question 844

A named ACL `EDGE_FILTER` exists in global configuration, but permitted and denied traffic still crosses the user-facing Gi0/0 ingress unchecked. Which interface command applies it?

  1. `access-class EDGE_FILTER out` under line console
  2. `ip access-group EDGE_FILTER in`
  3. `ip nat inside source EDGE_FILTER`
  4. `ip access-group EDGE_FILTER out` on Gi0/0

Explanation

Correct Answer

B:

Binding the named ACL inbound to Gi0/0 enforces filtering as packets arrive from the user LAN.

Incorrect Answers

A:

access-class controls terminal access, not ordinary routed transit traffic.

C:

NAT commands do not attach a named ACL as the required interface transit filter.

D:

Out filters packets leaving Gi0/0 rather than entering from LAN clients.

Question 845

A standard ACL currently permits `192.168.10.0 0.0.0.255`, but only host subnet 192.168.10.96/27 should be allowed. Which replacement source/wildcard narrows the match correctly?

  1. `192.168.10.96 0.0.0.63`
  2. `192.168.10.96 0.0.0.31`
  3. `192.168.10.96 0.0.0.255`
  4. `192.168.10.128 0.0.0.31`

Explanation

Correct Answer

B:

/27 has 32 addresses and inverse wildcard 0.0.0.31, starting at .96 for range .96–.127.

Incorrect Answers

A:

0.0.0.63 is a /26-sized wildcard and permits more than the requested /27.

C:

0.0.0.255 permits all last-octet values within the /24.

D:

.128/27 is the adjacent subnet and excludes .96–.127.

Question 846

Rogue DHCP servers are appearing on employee access ports in VLAN 20 at a warehouse distribution floor. What switch feature and trust design should be implemented?

  1. Set all user ports as trunk allowed any VLAN
  2. Disable DHCP snooping for the affected VLAN
  3. Trust every client-facing untrusted access port
  4. Enable ip dhcp snooping globally and for VLAN 20, then trust only the verified DHCP-server uplink

Explanation

Correct Answer

D:

DHCP snooping distinguishes trusted infrastructure DHCP-server paths from untrusted host access ports.

Incorrect Answers

A:

Trunk allowed VLANs do not enforce DHCP-server trust boundaries.

B:

Disabling the feature removes the intended rogue-server defense.

C:

Trusting arbitrary client ports permits rogue DHCP responses.

Question 847

A printer jack Gi1/0/2 in VLAN 33 is open to the public but the DHCP server resides upstream. Should the printer jack be trusted for DHCP snooping?

  1. Keep client port Gi1/0/2 untrusted for DHCP snooping and trust only the genuine server-facing uplink
  2. Allow DHCP server messages from all access ports to maximize lease availability
  3. Configure Gi1/0/2 as ip dhcp snooping trust even though arbitrary clients connect there
  4. Configure no DHCP snooping so all OFFER responses are accepted

Explanation

Correct Answer

A:

Client-facing switchports remain untrusted so unauthorized DHCP server OFFER/ACK packets can be rejected.

Incorrect Answers

B:

Allowing server responses from arbitrary client ports enables the attack being prevented.

C:

Trust on an ordinary client access port permits rogue DHCP server traffic.

D:

No snooping enforcement defeats the security requirement.

Question 848

At a disaster-recovery location, an attacker on VLAN 46 sends forged ARP replies claiming to own the default gateway IP. Which Layer 2 security defense verifies IP-to-MAC claims?

  1. Enable Dynamic ARP Inspection with a valid DHCP snooping binding source on the affected VLAN
  2. Rely only on STP portfast to validate ARP addresses
  3. Set the default route to the attacker MAC address
  4. Disable ARP validation and accept any sender IP/MAC pair

Explanation

Correct Answer

A:

DAI validates ARP claims against trusted IP-MAC binding information, often learned via DHCP snooping.

Incorrect Answers

B:

PortFast changes spanning-tree edge transition, not ARP binding validation.

C:

An IP route cannot be configured to a MAC as the ARP integrity mechanism.

D:

Accepting arbitrary ARP mappings permits poisoning and interception.

Question 849

Only 4 approved device MAC address(es) should be accepted on edge port Gi1/0/4 at a regional healthcare office. Which IOS interface command sets that exact port-security maximum?

  1. no switchport port-security
  2. switchport port-security maximum 4
  3. switchport port-security maximum 6
  4. switchport port-security maximum 0

Explanation

Correct Answer

B:

A port-security maximum of 4 enforces the intended upper bound of learned secure MAC identities on a single access port.

Incorrect Answers

A:

Removing port-security does not bound MAC learning to the policy limit.

C:

This higher MAC limit allows additional unauthorized client identities beyond policy.

D:

A zero maximum does not establish the requested positive authorized MAC count.

Question 850

An enterprise port-security policy at a municipal library requires edge port Gi1/0/5 to become err-disabled as soon as an unauthorized source MAC is observed. What violation mode fits?

  1. Use violation restrict and assume it always powers off the switch
  2. Disable all port security so offending MAC addresses are silently allowed
  3. Use port-security violation shutdown if policy requires err-disabling the offending port
  4. Use violation protect and expect the interface to err-disable

Explanation

Correct Answer

C:

Port-security violation shutdown places the affected interface in err-disabled state on a violation.

Incorrect Answers

A:

Restrict typically drops violation traffic with logging/counters but does not by itself shut down the port.

B:

Disabling port security fails to enforce the authorized-MAC policy.

D:

Protect silently drops disallowed source traffic without the same interface-shutdown behavior.