McAfee-Secured Website

Exam Bundle

Exam Code: 200-301

Exam Name Cisco Certified Network Associate (CCNA)

Certification Provider: Cisco

Corresponding Certification: CCNA

Cisco 200-301 Bundle $44.99

100% Cisco 200-301 Guaranteed Success With Testking Training Materials

Get Real 200-301 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    200-301 Questions & Answers

    760 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 200-301 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 200-301 Video Course

    200-301 Video Course

    271 Video Lectures

    200-301 Video Course is developed by Cisco Professionals to help you pass the 200-301 exam.

    Description

    This course will improve your knowledge and skills required to pass Cisco Certified Network Associate (CCNA) exam.
  • Study Guide

    200-301 Study Guide

    1969 PDF Pages

    Developed by industry experts, this 1969-page guide spells out in painstaking detail all of the information you need to ace 200-301 exam.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    760 Questions

    $124.99
  • 200-301 Video Course

    Video Course

    271 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1969 PDF Pages

    $29.99

Cisco 200-301 Practice Test 83

Question 820

Traffic from 10.50.10.0/24 should reach server 192.0.2.20 using TCP destination 443 only. Which IOS ACE has the intended protocol and destination service match?

  1. permit udp 10.50.10.0 0.0.0.255 host 192.0.2.20 eq 443
  2. permit ip any any
  3. permit tcp host 192.0.2.20 10.50.10.0 0.0.0.255 eq 443
  4. permit tcp 10.50.10.0 0.0.0.255 host 192.0.2.20 eq 443

Explanation

Correct Answer

D:

The ACE matches TCP packets from the specified /24 to that host’s HTTPS port.

Incorrect Answers

A:

UDP protocol does not match conventional TCP HTTPS traffic.

B:

This permits far more traffic than the specified one-service policy.

C:

Source and destination are reversed relative to client-to-server direction.

Question 821

An engineer reviews ACL source 10.1.2.0 with wildcard 0.0.0.255. What does a wildcard bit set to 1 mean for the address comparison?

  1. Match only packets with destination TCP port 1
  2. Use subnet masks and wildcard masks as identical bit patterns
  3. Ignore that bit when matching the packet address
  4. Require that bit to be exactly 1 in every packet

Explanation

Correct Answer

C:

Cisco ACL wildcard ones represent don’t-care bits; zeros must match the specified address bits.

Incorrect Answers

A:

IP wildcard bits do not directly match transport port numbers.

B:

A subnet mask’s one bits represent network prefix, whereas wildcard masks invert the comparison logic.

D:

A one in wildcard means unconstrained, not necessarily a one in the packet.

Question 822

An extended ACL must permit one /25 client network, 192.168.42.128/25, to reach a DNS server. Which source-and-wildcard pair matches only that /25?

  1. `192.168.42.0 0.0.0.127`
  2. `192.168.42.128 0.0.0.255`
  3. `192.168.42.128 255.255.255.128`
  4. `192.168.42.128 0.0.0.127`

Explanation

Correct Answer

D:

A /25 has a 128-address block; the ACL wildcard is 0.0.0.127 and starts at 128.

Incorrect Answers

A:

This pair matches the other /25 block .0–.127.

B:

Wildcard 0.0.0.255 permits the entire /24, broadening the source set.

C:

255.255.255.128 is neither the correct /25 subnet mask nor the inverse wildcard.

Question 823

Traffic from VLAN 30 must be filtered immediately as it enters router Gi0/0, before the router makes a forwarding decision. Which interface subcommand is appropriate?

  1. `access-class 130 in` on VTY lines
  2. `ip nat inside source list 130`
  3. `ip access-group 130 in`
  4. `ip access-group 130 out`

Explanation

Correct Answer

C:

Inbound interface ACL filtering is performed on traffic entering that Layer 3 interface.

Incorrect Answers

A:

access-class on VTY controls management login sources, not transit packet forwarding.

B:

NAT matching and ACL interface application are different router features.

D:

Out would filter traffic leaving the Gi0/0 interface, opposite of the specified ingress direction.

Question 824

An ACL contains sequence 10 `deny tcp 10.10.0.0 0.0.255.255 any eq 23` and sequence 20 `permit ip any any`. A matching TCP Telnet packet arrives. What is the result?

  1. The packet is forwarded because `permit ip any any` always outranks protocol-specific lines.
  2. The packet is forwarded because the last entry is a permit.
  3. The router first evaluates only the entry with the largest sequence number.
  4. The packet is dropped by sequence 10 despite the later general permit.

Explanation

Correct Answer

D:

Cisco ACL evaluation stops at the first matching line; the Telnet packet matches the earlier deny.

Incorrect Answers

A:

A broad permit later in the ACL does not override an earlier matching deny.

B:

ACLs are first-match, not last-match, so sequence 20 is not reached.

C:

Sequence order is evaluated ascending rather than prioritizing the highest number.

Question 825

An interface ACL contains just `permit udp 192.168.5.0 0.0.0.255 host 10.8.8.8 eq 53`. What happens to a TCP SSH packet that matches no explicit line?

  1. It is translated into UDP port 53 automatically.
  2. It is allowed whenever a switch sees the source MAC address.
  3. It is denied by the implicit deny at the end of the ACL.
  4. It is permitted by an implicit permit ip any any.

Explanation

Correct Answer

C:

IOS IPv4 ACLs have an implicit deny for traffic that matches no explicit permit.

Incorrect Answers

A:

ACL decisions do not rewrite SSH into DNS transport.

B:

Layer 2 MAC discovery does not override a routed ACL no-match decision.

D:

There is no implicit permit-all statement in a normal ACL.

Question 826

After modifying ACL 145, an operator suspects it is not bound to the intended WAN egress interface Gi0/1. Which operational IOS command displays ACL associations and directions on Gi0/1?

  1. `show access-lists 145` alone
  2. `show ip dhcp snooping`
  3. `show etherchannel summary`
  4. `show ip interface GigabitEthernet0/1`

Explanation

Correct Answer

D:

The detailed IP interface output includes inbound/outbound access-list bindings for the interface.

Incorrect Answers

A:

The ACL definition alone does not establish that this interface uses it in the intended direction.

B:

DHCP snooping status is independent of IPv4 routed ACL attachment.

C:

EtherChannel state does not reveal an IP ACL binding on routed Gi0/1.

Question 827

An ACL must filter packets from users as they enter router interface Gi0/0 before being routed toward other networks. Which interface application direction is required?

  1. access-class 120 in under a VTY line
  2. ip access-group 120 out
  3. ip nat inside source list 120
  4. ip access-group 120 in

Explanation

Correct Answer

D:

The in keyword applies the IPv4 ACL to packets arriving on the interface.

Incorrect Answers

A:

Access-class restricts management line connections rather than forwarded interface traffic.

B:

Out would filter packets leaving Gi0/0, not arriving from the attached users.

C:

A NAT statement selects translation addresses and is not an interface traffic-filter application.

Question 828

A standard ACL denies source 10.1.10.0/24, but that source must still access all servers except a protected finance network. Where should the standard ACL normally be placed?

  1. Only on unrelated switch console VTY lines.
  2. On every routed interface in both directions.
  3. Near the source so it drops the entire subnet before any destination selection.
  4. Near the finance destination rather than on the source-side router uplink.

Explanation

Correct Answer

D:

Standard ACLs match source address only; applying them near the destination limits unintended blocking of other destinations.

Incorrect Answers

A:

VTY access control does not filter ordinary data-plane traffic to finance servers.

B:

Applying everywhere broadens accidental denial across the network.

C:

Source-side placement would drop traffic to unrelated allowed destinations.

Question 829

Policy allows DNS queries to 203.0.113.53 but denies other UDP services to the same server. What type of IPv4 ACL can explicitly match destination IP, protocol and destination port?

  1. Standard IPv4 ACL only
  2. A VLAN database assignment
  3. Extended IPv4 ACL
  4. A CDP neighbor-filter setting

Explanation

Correct Answer

C:

Extended ACEs can test source/destination addresses, transport protocol and relevant TCP/UDP ports.

Incorrect Answers

A:

Standard ACL matching is source-address focused and cannot explicitly distinguish the destination UDP service.

B:

VLAN membership does not express a routed UDP destination port policy.

D:

CDP neighbor discovery cannot selectively permit DNS flows by UDP port.

Question 830

An engineer sends test packets and wants to identify which configured IPv4 ACL entries matched them. Which command displays ACEs and their match counters?

  1. show arp
  2. show access-lists
  3. show ip interface brief
  4. show cdp neighbors

Explanation

Correct Answer

B:

The show access-lists output includes access-list entries with available match counts for troubleshooting.

Incorrect Answers

A:

ARP cache mappings do not show routed access-list hit counts.

C:

Interface summary does not enumerate individual ACL ACE matches.

D:

CDP neighbors are not evidence of ACL traffic matches.