McAfee-Secured Website

Exam Bundle

Exam Code: 200-301

Exam Name Cisco Certified Network Associate (CCNA)

Certification Provider: Cisco

Corresponding Certification: CCNA

Cisco 200-301 Bundle $44.99

100% Cisco 200-301 Guaranteed Success With Testking Training Materials

Get Real 200-301 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    200-301 Questions & Answers

    760 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 200-301 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 200-301 Video Course

    200-301 Video Course

    271 Video Lectures

    200-301 Video Course is developed by Cisco Professionals to help you pass the 200-301 exam.

    Description

    This course will improve your knowledge and skills required to pass Cisco Certified Network Associate (CCNA) exam.
  • Study Guide

    200-301 Study Guide

    1969 PDF Pages

    Developed by industry experts, this 1969-page guide spells out in painstaking detail all of the information you need to ace 200-301 exam.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    760 Questions

    $124.99
  • 200-301 Video Course

    Video Course

    271 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1969 PDF Pages

    $29.99

Cisco 200-301 Practice Test 67

Question 660

Dynamic inside-source NAT uses ACL 10 with `permit 10.10.10.0 0.0.0.255`. Clients in 10.10.20.0/24 receive no translation. All interfaces and pool configuration are correct. What should be changed?

  1. Assign the remote Web server a different MAC address.
  2. Make the client access VLAN the trunk native VLAN.
  3. Change OSPF DR priority to zero on the NAT router.
  4. Include 10.10.20.0/24 in the NAT source-match ACL.

Explanation

Correct Answer

D:

An inside-source dynamic NAT rule only translates inside addresses that match its configured standard ACL.

Incorrect Answers

A:

Server MAC changes do not make the 10.10.20.0/24 client source match ACL 10.

B:

Native VLAN assignment does not edit NAT source eligibility.

C:

OSPF DR priority is unrelated to the NAT source-list match.

Question 661

Fifty office clients must share one ISP-facing Gi0/1 public IPv4 address for outbound Internet access. Which NAT statement enables address-and-port multiplexing?

  1. `ip nat inside source static 10.1.1.1 203.0.113.1`
  2. `ip nat outside source list 1 interface GigabitEthernet0/1`
  3. `ip nat inside source list 1 interface GigabitEthernet0/1`
  4. `ip nat inside source list 1 interface GigabitEthernet0/1 overload`

Explanation

Correct Answer

D:

PAT overload translates matching inside sessions through the one interface address using distinct transport identifiers as needed.

Incorrect Answers

A:

A static one-to-one map serves just one inside host and does not provide pooled PAT for fifty clients.

B:

Outside-source NAT is the wrong translation direction for inside users.

C:

Without overload, dynamic one-to-one address translation cannot multiplex many clients on a single address in this manner.

Question 662

A dynamic NAT pool has four public addresses and no overload option. Four inside hosts maintain translations, and a fifth attempts to open a new session. What limitation should be expected?

  1. All five share one public address using automatic PAT.
  2. The fifth host may fail to obtain a translation until a pool address is free.
  3. The NAT service automatically converts into static one-to-one mappings.
  4. The router allocates additional public addresses outside the configured pool.

Explanation

Correct Answer

B:

Without PAT, dynamic NAT requires an available mapped address from the finite configured pool for a new inside host.

Incorrect Answers

A:

Automatic many-to-one multiplexing requires an overload configuration.

C:

Dynamic NAT pool exhaustion does not transform configured behavior into static NAT.

D:

NAT cannot invent routable ISP addresses beyond the configured pool.

Question 663

The branch reports outbound NAT failure. The engineer needs to see active inside-local/inside-global mappings and TCP port entries after sending a test flow. Which show command is best?

  1. `show ip route ospf`
  2. `show ip dhcp snooping binding`
  3. `show interfaces switchport`
  4. `show ip nat translations`

Explanation

Correct Answer

D:

The NAT translation table shows active translated addressing and ports associated with sessions.

Incorrect Answers

A:

OSPF route output does not list active NAT address and port mappings.

B:

DHCP snooping records address assignments, not runtime NAT translations.

C:

Switchport mode is a Layer 2 setting and does not display NAT sessions.

Question 664

Two inside hosts each open a TCP session to one Internet server and both use inside-global address 198.51.100.5 under PAT. How can the router still distinguish their return flows?

  1. By changing each host into a different access VLAN on every packet.
  2. By assuming the Internet server will guess each private inside address.
  3. By tracking distinct translated TCP source ports and connection tuples.
  4. By assigning both sessions the same untracked source-port tuple.

Explanation

Correct Answer

C:

PAT records translated transport identifiers alongside IP addresses so reverse traffic maps to the correct inside session.

Incorrect Answers

A:

Port address translation does not require per-packet VLAN reassignment.

B:

The public server does not route to each private inside IP address directly.

D:

Overlapping identical public tuples would be ambiguous without translation state.

Question 665

An ISP allocated the block 203.0.113.64/28. The NAT pool should cover hosts .65 through .78. Which subnet mask belongs in the `ip nat pool` configuration?

  1. `255.255.255.240`
  2. `255.255.255.0`
  3. `255.255.255.255`
  4. `255.255.255.248`

Explanation

Correct Answer

A:

The public allocation is a /28, whose dotted-decimal mask is 255.255.255.240.

Incorrect Answers

B:

/24 is broader than the ISP-allocated /28 block.

C:

/32 denotes one host instead of a pool block.

D:

/29 is narrower and does not cover the entire requested .65–.78 range.

Question 666

A Web server must receive unsolicited inbound connections on one fixed public address even after all client sessions have expired. What source-NAT design fits?

  1. A dedicated static inside-source address mapping to that server.
  2. An ACL entry that lists a private address but creates no translation.
  3. PAT using ephemeral outbound client ports only.
  4. Dynamic NAT without a fixed address reservation.

Explanation

Correct Answer

A:

A static NAT map persists as a predictable one-to-one public representation of the inside server, subject to routing and ACLs.

Incorrect Answers

B:

ACL matching controls eligibility/filtering but does not itself create the requested fixed NAT binding.

C:

Outbound PAT ports do not automatically establish a fixed inbound server address mapping.

D:

Dynamic NAT maps can be temporary and do not guarantee a permanent externally reachable address for that host.

Question 667

A router has an inside-source NAT rule and a valid address pool, but client traffic shows no translations. Gi0/0 to users is configured `ip nat outside`, while Gi0/1 to ISP is `ip nat inside`. Which correction is indicated?

  1. Keep the inverted roles and simply increase the OSPF reference bandwidth.
  2. Rename the public address pool without changing interfaces.
  3. Swap the NAT roles: users inside, ISP-facing interface outside.
  4. Remove all access VLAN assignments to force the router into NAT mode.

Explanation

Correct Answer

C:

Inside-source NAT classification requires the private user interface to be inside and the external path outside.

Incorrect Answers

A:

OSPF reference bandwidth adjusts routing costs, not NAT interface role classification.

B:

Pool name cosmetics cannot repair inverted inside/outside roles.

D:

Access VLAN removal does not restore correct L3 NAT role configuration.

Question 668

An engineer wants to know whether NAT hits and misses increase after sending test traffic, and how many active translations exist. Which operational command is appropriate?

  1. `show interfaces trunk`
  2. `show ip ospf database`
  3. `show ip nat statistics`
  4. `show vlan brief`

Explanation

Correct Answer

C:

NAT statistics report translation counts and hit/miss activity for troubleshooting.

Incorrect Answers

A:

Trunk state does not display NAT translation allocation statistics.

B:

OSPF LSDB shows link-state routing information, not address translation counters.

D:

VLAN membership data does not count NAT translation hits and misses.

Question 669

A standard ACL for inside-source NAT matches `10.22.0.0 0.0.255.255`. Users at 10.22.3.10 can reach both external server 203.0.113.10 and server 198.51.100.10. Which packet field drives the NAT ACL match?

  1. The application-layer host header in DNS responses only.
  2. The remote destination IP addresses only.
  3. The outgoing Ethernet destination MAC only.
  4. The inside host IPv4 source address 10.22.3.10.

Explanation

Correct Answer

D:

A standard ACL used by the inside-source NAT rule identifies inside source addresses eligible for translation.

Incorrect Answers

A:

The NAT source address list does not match an HTTP Host header.

B:

A standard ACL does not select hosts by destination IPv4 address.

C:

Ethernet forwarding MAC addresses are not the standard ACL source IP match.

Question 670

A router has a correct static NAT address for an internal application, but inbound connection attempts are still denied by an applied security ACL. What is the missing part of service availability?

  1. Change the NAT pool name to match the domain name.
  2. Turn on STP PortFast on the ISP Ethernet uplink.
  3. Permit the intended traffic through the relevant security policy as well as the NAT mapping.
  4. Delete the static translation and disable interface routing.

Explanation

Correct Answer

C:

NAT address translation does not itself grant access through separate firewall/ACL filters.

Incorrect Answers

A:

A pool label does not change access control or NAT forwarding behavior.

B:

Spanning-tree edge settings do not override Layer 3 security ACL decisions.

D:

Removing translation makes the public server path less reachable, not more.