McAfee-Secured Website

Exam Code: 156-315.82

Exam Name: Check Point Certified Security Expert - R82 (CCSE)

Certification Provider: Checkpoint

Corresponding Certification: CCSE R82

Questions & Answers

100% Checkpoint 156-315.82 Guaranteed Success With Testking Training Materials

Get Real 156-315.82 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

Questions & Answers

100 Questions & Answers with Testing Engine

"Check Point Certified Security Expert - R82 (CCSE) Exam", also known as 156-315.82 exam, is a Checkpoint certification exam.

Pass your tests with the always up-to-date 156-315.82 Exam Engine. Your 156-315.82 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Checkpoint 156-315.82 Practice Test 9

Question 80

IKE phase one completes to a partner, but the partner log rejects child security associations because traffic selectors do not agree. Both public endpoints and credentials are correct. What should the engineer compare with the partner before changing the external link?

  1. Verify phase-two traffic selectors and matching policy rules
  2. Compare phase settings, algorithms, and proposals on both peers
  3. Review IKE negotiation settings and authentication on both peers
  4. Configure the gateway Link Selection settings

Explanation

Correct Answer

A:

Compare phase-two local/remote protected traffic selectors and matching encryption-domain policy; phase-one success does not establish compatible child selectors.

Incorrect Answers

B:

Changing phase-one IKE algorithms cannot correct a child-SA traffic selector mismatch after the IKE session has established.

C:

Testing phase-one authentication again does not address an already negotiated IKE SA.

D:

Switching the gateway egress interface does not correct mismatched phase-two subnet definitions.

Question 81

A custom SmartEvent definition must match logs only when both the action is Drop and the source network is an untrusted partner. It currently fires if either condition holds, flooding the queue. What filter combination should be configured?

  1. Match Any Conditions so either predicate may independently trigger the event
  2. Exclude the entire event definition from correlation instead of filtering
  3. Match All Conditions so both required predicates must be present in the same candidate log
  4. Select a lower severity without modifying the Boolean filter

Explanation

Correct Answer

C:

All Conditions requires the two log-field predicates together, matching the specified narrow detection.

Incorrect Answers

A:

Any Conditions uses logical OR, which causes the reported unwanted broad matches.

B:

Disabling correlation removes valid matches as well as incorrect matches.

D:

Severity changes presentation, not whether the filter combines predicates with AND or OR.

Question 82

An administrator selects an R82 ElasticXL cluster in SmartConsole and attempts to deploy a Jumbo Hotfix using Central Deployment. The tool refuses the selected target, although the cluster is online and policy installation works. Which limitation applies?

  1. Central Deployment always requires one cluster member rather than a full cluster object
  2. Jumbo Hotfix packages are never supported by any Check Point Security Gateway
  3. Central Deployment does not support ElasticXL clusters; use the documented scalable-platform patch procedure
  4. ElasticXL can receive packages only after enabling a second SmartEvent Server

Explanation

Correct Answer

C:

Check Point explicitly lists ElasticXL among Central Deployment exclusions; a supported alternative upgrade path is needed.

Incorrect Answers

A:

Central Deployment’s ordinary cluster selection rules do not make an unsupported ElasticXL target valid.

B:

Jumbo packages are widely supported; the restriction concerns this deployment method and platform combination.

D:

SmartEvent is unrelated to the package-installation support matrix for ElasticXL.

Question 83

A disconnected source Management Server has the R82 Upgrade Tools staged locally. Its Pre-Upgrade Verifier command hangs while checking Check Point Cloud for newer tools. The change owner must run the supported offline verification before export. Which syntax reflects this?

  1. migrate_server export -v R82 without running verification at all
  2. migrate_server import -v R82 with no exported archive
  3. cplic print -skip_upgrade_tools_check to skip checking installed license state
  4. migrate_server verify -v R82 -skip_upgrade_tools_check

Explanation

Correct Answer

D:

The documented skip option avoids cloud-tool checking when running the R82 migration verifier offline.

Incorrect Answers

A:

Exporting without the required compatibility verification does not address the known offline precheck.

B:

Import is the destination operation and cannot replace a source compatibility verifier.

C:

License inspection uses a different command and has no such documented upgrade-tool option.

Question 84

An R82 ElasticXL project requires VSNext virtualization. A contractor proposes installing a conventional ElasticXL cluster now and converting it to VSNext after onboarding all appliances. Which decision must be made during the initial Gaia First Time Configuration Wizard?

  1. Select Install as VSNext during initial installation because later conversion is not supported
  2. Configure Traditional VSX first, then rely on an automatic post-install conversion
  3. Select VSNext only after the cluster has at least two ElasticXL Sites
  4. Enable SmartEvent on the SMO before the virtualization mode can be selected

Explanation

Correct Answer

A:

Check Point explicitly requires choosing VSNext during the first wizard if the ElasticXL cluster will use it.

Incorrect Answers

B:

Traditional VSX is not the supported ElasticXL virtualization mode, and the assumed conversion is unavailable.

C:

The mode selection is an installation-time decision, not a topology threshold based on site count.

D:

SmartEvent configuration is unrelated to choosing the installation virtualization mode.

Question 85

The secondary R82 Management Server has completed full synchronization and shows Standby. A gateway is expected to fetch policy after a primary failure, but its object lists only the primary Management Server under Fetch Policy. What must be added before relying on failover?

  1. Reset Secure Internal Communication on every unrelated gateway as a precaution
  2. Add the secondary Management Server in each relevant gateway object’s Fetch Policy list
  3. Switch the secondary into Active while the primary remains healthy
  4. Disable Management High Availability synchronization on the secondary

Explanation

Correct Answer

B:

After configuring a secondary manager, Check Point directs adding it to each managed gateway’s Fetch Policy list.

Incorrect Answers

A:

Unrelated SIC resets can disconnect healthy gateways and do not supply the missing backup policy-fetch server.

C:

Premature promotion does not ensure that the gateway knows where to fetch policy during failover.

D:

Disabling synchronization undermines the redundant policy database required for a healthy standby.

Question 86

An R82 HTTPS Inspection rule should apply to a cloud service whose published IPs frequently change. The Access Control rule already permits the destination, but inspection exclusions are stale. Which policy mechanism can follow the published service membership?

  1. Create a Manual NAT rule that rewrites outbound source ports every time the service expands
  2. Change the VPN domain to include the provider public address range
  3. Use an Updatable Object as a source or destination in the HTTPS Inspection rule
  4. Rely on a static network group refreshed only when SmartConsole is upgraded

Explanation

Correct Answer

C:

Check Point supports Updatable Objects as HTTPS Inspection policy sources or destinations to track changing service lists.

Incorrect Answers

A:

NAT source-port rewriting has no connection to selecting cloud destinations for encrypted-traffic inspection.

B:

VPN encryption domains do not control HTTPS Inspection scope in the Security Management rulebase.

D:

A manually maintained static group cannot provide the documented automatic service membership refresh.

Question 87

An R82 ElasticXL cluster has two internet circuits and must connect to a third-party IPsec peer. An engineer proposes Enhanced Link Selection, but the VPN feature matrix rejects the cluster type. Which documented constraint must drive the design review?

  1. Enhanced Link Selection is not supported on ElasticXL clusters
  2. Enhanced Link Selection requires SmartEvent installation on every cluster member
  3. Enhanced Link Selection permits only a single private subnet per peer
  4. Enhanced Link Selection is restricted to gateways with dynamically assigned public IPs

Explanation

Correct Answer

A:

The R82 Enhanced Link Selection limitations explicitly include ElasticXL, so another supported design is needed.

Incorrect Answers

B:

SmartEvent is not a prerequisite for selecting VPN egress interfaces, regardless of cluster design.

C:

The restriction is not a one-subnet VPN domain limit; it is a platform incompatibility.

D:

Dynamically assigned addresses are themselves an unsupported configuration for this feature, not a prerequisite.

Question 88

A SmartEvent incident remains active while related attack logs arrive over several minutes. Analysts want later matching logs to update that open event instead of creating a separate incident immediately. Which advanced event-time control should they inspect?

  1. The Keep event open for duration in the Event Definition advanced settings
  2. The cluster policy-install target list in Security Management
  3. The VPN permanent tunnel test interval on the gateway
  4. The NAT translated service in the Access Control policy

Explanation

Correct Answer

A:

The advanced Event Definition can keep an event open for a configured time, allowing related updates.

Incorrect Answers

B:

Security policy target selection cannot change SmartEvent correlation lifecycle timing for this event.

C:

Permanent VPN tunnel monitoring is separate from SmartEvent event-open duration.

D:

NAT service translation does not determine when a correlated event closes.

Question 89

Gateways are intentionally isolated from Check Point Cloud. SmartConsole Central Deployment is approved, the Management Server can reach the gateways and has the tested package stored locally. Which package-source choice avoids relying on cloud downloads?

  1. Use the package repository on the Management Server as the Central Deployment source
  2. Force every gateway to use the cloud package source regardless of its blocked internet connection
  3. Start an unrelated management database migration before package selection
  4. Create a new VPN community and move the package over a permanent tunnel

Explanation

Correct Answer

A:

Central Deployment can draw packages from a Management Server repository, avoiding the target-cloud download requirement.

Incorrect Answers

B:

Cloud download depends on reachability that the change record explicitly prohibits.

C:

Database migration is not a prerequisite to selecting a local package source for gateway deployment.

D:

VPN community topology is not how SmartConsole selects the supported package distribution source.

Question 90

A management database migration must preserve historic Check Point logs together with their indexes because a forensic team needs old searches to work immediately after import. The team is considering migrate_server log options. Which documented option includes indexes?

  1. Use the -x log export/import option rather than -l, which excludes log indexes
  2. Use the -l option alone because it always preserves the full log indexes
  3. Disable event correlation during migration to rebuild indexed logs automatically
  4. Use -skip_upgrade_tools_check because it controls whether log indexes are exported

Explanation

Correct Answer

A:

The R82 migrate_server -x option includes logs with their indexes; -l transfers logs without indexes.

Incorrect Answers

B:

The -l switch is specifically described as omitting indexed log data.

C:

Event correlation service state is independent of the migrate_server log-index export option.

D:

The skip flag controls cloud Upgrade Tools checking, not log archive contents.

Check Point Certified Security Expert - R82 (CCSE) (156-315.82) Practice Tests