McAfee-Secured Website

Exam Code: 156-315.82

Exam Name: Check Point Certified Security Expert - R82 (CCSE)

Certification Provider: Checkpoint

Corresponding Certification: CCSE R82

Questions & Answers

100% Checkpoint 156-315.82 Guaranteed Success With Testking Training Materials

Get Real 156-315.82 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

Questions & Answers

100 Questions & Answers with Testing Engine

"Check Point Certified Security Expert - R82 (CCSE) Exam", also known as 156-315.82 exam, is a Checkpoint certification exam.

Pass your tests with the always up-to-date 156-315.82 Exam Engine. Your 156-315.82 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Checkpoint 156-315.82 Practice Test 14

Question 130

Security analysts open an R82 SmartEvent detail panel, but a new enrichment field exists in logs and is absent from the event summary display. The detection definition and severity are already correct. Which display-level configuration controls that field selection?

  1. Assign appropriate SmartEvent event severity
  2. Configure Event Format field display mapping
  3. Build a customizable view in SmartView or Logs & Events
  4. Configure the relevant SmartEvent alert reaction

Explanation

Correct Answer

B:

Edit Event Format to map and display the relevant field in the event details presentation.

Incorrect Answers

A:

Changing event severity does not add a missing field to the detail display.

C:

A new graphical search view cannot necessarily change the Event Format of this existing event.

D:

Alert reactions send notifications; they do not control which event metadata field is shown.

Question 131

A managed gateway still runs the old major Check Point release. The approved change is to upgrade that gateway to the documented compatible R82 major version, not apply a Jumbo Hotfix and not change policy. Which SmartConsole deployment action is appropriate?

  1. Select gateways in SmartConsole and Install Hotfix/Jumbo
  2. Use the Install Hotfix/Jumbo deployment action
  3. Select Gateway & Server objects under Central Deployment
  4. Use the Version Upgrade action on the selected gateway

Explanation

Correct Answer

D:

Use Version Upgrade on the selected managed gateway after confirming the supported path and prerequisites.

Incorrect Answers

A:

Install Hotfix/Jumbo is for hotfix packages, not a release-version upgrade.

B:

Installing a same-release hotfix does not satisfy the required major-version transition.

C:

Selecting gateway objects is a preparatory step, not the Version Upgrade action.

Question 132

A replacement management appliance is blank, while the source R82 export is verified and ready. An engineer proposes copying the database directly onto an old unsupported installation. What target-system prerequisite should be completed before import?

  1. Perform a supported clean installation of R82 on the target
  2. Invoke migrate_server import for the exported archive
  3. Connect the new management host on the intended network
  4. Export on the source and import on the destination

Explanation

Correct Answer

A:

Install a supported clean R82 Management Server target according to the migration procedure before importing its database.

Incorrect Answers

B:

Running import onto an unprepared or unsupported host bypasses the required target installation step.

C:

Network connection comes later and does not replace installing a compatible management software environment.

D:

The export/import strategy alone does not ensure the destination OS and management components are ready.

Question 133

A replacement appliance is visible on the ElasticXL Sync network, but the management team needs to inspect its current admission state from the cluster-aware command line. A member-local interface list does not show the global provisioning workflow. Which command view is relevant?

  1. Use Gaia Portal Cluster Management > Pending Gateways
  2. Run show cluster info provision in Gaia gClish
  3. Use Gaia gClish for global cluster commands
  4. Allow the automatic image/configuration clone from SMO

Explanation

Correct Answer

B:

Run show cluster info provision in Gaia gClish to inspect the ElasticXL provisioning and discovery state.

Incorrect Answers

A:

Insights can monitor progress but the scenario requests the specific cluster provisioning command view.

C:

Entering gClish is prerequisite context, not the command that displays the provisioning data.

D:

Pending Gateways is a Gaia Portal workflow rather than the requested CLI diagnostic.

Question 134

After an R82 management pair is formed, analysts compare object and Access Control revisions on both peers and find only changes published on the active manager appear on the standby. The gateway clustering mechanism is independent. What keeps the management databases consistent?

  1. Use Management HA revision-based synchronization for published changes
  2. Back up or snapshot all HA servers at the same point in time
  3. Plan management-server redundancy separately from gateway clustering
  4. Use Management High Availability database synchronization

Explanation

Correct Answer

D:

Management HA database synchronization replicates published objects, rules, and management settings between the management peers.

Incorrect Answers

A:

Revision-aware behavior describes when synchronization occurs, but not a gateway clustering replacement.

B:

Snapshots provide backups; they do not continuously synchronize management policy revisions.

C:

Planning separate gateway HA is correct architecture but does not replicate management databases.

Question 135

A security gateway must translate internal clients only when they contact one specified partner server; the same clients must retain their original source for other destinations. Automatic Hide NAT is too broad. Which translation policy confines both original endpoints?

  1. Create a Manual NAT rule with both translated fields
  2. Create an appropriate one-direction Manual NAT policy rule
  3. Place the intended matching rule first in the NAT rule order
  4. Create a Manual NAT rule matching the specified address pair

Explanation

Correct Answer

D:

Use a Manual NAT rule matching both the original client source and the designated partner destination.

Incorrect Answers

A:

Translating both address fields is unnecessary when only the client source must change.

B:

One-direction NAT controls direction, but without the specific destination match remains too broad.

C:

Rule ordering cannot impose source/destination constraints on a rule that lacks them.

Question 136

Four branch gateways require direct encrypted communication with every other branch. No central gateway should be mandatory, and the sites are all managed in the same R82 environment. Which VPN community topology naturally expresses the peer relationships?

  1. Use a Star VPN community with the hub as center
  2. Configure both gateways in the appropriate Site-to-Site VPN community
  3. Use a Mesh VPN community for peer relationships
  4. Apply the permanent-tunnel setting to the entire community

Explanation

Correct Answer

C:

Choose a Mesh community so each member can form encrypted peer relationships with other members directly.

Incorrect Answers

A:

A Star community centralizes paths through a hub and does not model every-to-every branching.

B:

Adding gateways to some community is essential but does not select the requested topology.

D:

Marking tunnels permanent monitors their health; it does not change the community into a mesh.

Question 137

A manager asks to open Check Point’s existing graphical dashboards for recent intrusion and traffic trends, not an exportable PDF and not a custom new detection. The operator has access to SmartConsole Logs & Events. Which existing area should be opened?

  1. Open Logs & Events and select Reports
  2. Build a customizable view in SmartView or Logs & Events
  3. Deploy and configure SmartEvent event correlation
  4. Open Logs & Events and select Views

Explanation

Correct Answer

D:

Open Logs & Events and select Views to use predefined graphical security analytics.

Incorrect Answers

A:

Reports is oriented to report output and is not the requested interactive predefined Views collection.

B:

Custom chart creation is unnecessary before opening the existing curated Views catalog.

C:

Creating SmartEvent correlation would change detection logic rather than display existing trends.

Question 138

An R82 administrator wants to push an approved software package to two members of a managed high-availability gateway cluster. They are selecting targets in SmartConsole and accidentally highlight the Management Server object alone. What object selection aligns with Central Deployment?

  1. Use CPUSE for a compatible management-server in-place upgrade
  2. Select Gateway & Server objects under Central Deployment
  3. Run the Central Deployment Tool from the Management Server
  4. Use the Gateway & Servers deployment actions in SmartConsole

Explanation

Correct Answer

B:

Select the appropriate gateway or full cluster objects in Gateways & Servers before invoking supported Central Deployment.

Incorrect Answers

A:

The Management Server is the control host but is not the gateway target to patch.

C:

The tool execution host matters, but does not fix the incorrect target object selection.

D:

Opening deployment actions does not resolve the selection of the wrong object.

Question 139

A compressed R82 migrate_server archive passes source checksums but, after FTP transfer, the target checksum differs and the file length has changed. The transfer client reports ASCII conversion was enabled. How should the file be transported?

  1. Expect the import procedure to restart Check Point services
  2. Transfer the database export archive in binary mode
  3. Invoke migrate_server import for the exported archive
  4. Invoke migrate_server export from the prescribed scripts directory

Explanation

Correct Answer

B:

Re-transfer the compressed migration archive in binary mode so bytes are preserved without text conversion.

Incorrect Answers

A:

Comparing checksums detects the corruption but cannot fix a text-mode transfer.

C:

Importing the corrupted archive is unsafe and may fail to restore the management database.

D:

Re-running export is unnecessary if the original source archive is already valid.

Question 140

An administrator needs to move a member from ElasticXL Site 1 into Site 2. It already appears as a managed member of Site 1, so it is not pending for enrollment in the second site. The controls that address the separate requirement to increase capacity inside an existing ElasticXL Site are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Remove it then add as a pending member to the target site
  2. Expect the SMO to accept and distribute traffic to members
  3. Add the pending appliance to the existing Site
  4. Create a new Site while admitting the pending appliance

Explanation

Correct Answer

A:

The documented workflow removes and re-adds a node to the chosen site. This directly addresses the documented incident evidence.

Incorrect Answers

B:

The SMO handles distribution to other site members; this does not resolve the observed condition.

C:

Adding to the existing site enables supported load sharing, but the current evidence calls for a different R82 operation.

D:

A new site is used to establish High Availability sites, yet that applies to add a second ElasticXL Site for availability rather than the observed issue.

Check Point Certified Security Expert - R82 (CCSE) (156-315.82) Practice Tests