McAfee-Secured Website

Exam Code: 156-315.82

Exam Name: Check Point Certified Security Expert - R82 (CCSE)

Certification Provider: Checkpoint

Corresponding Certification: CCSE R82

Questions & Answers

100% Checkpoint 156-315.82 Guaranteed Success With Testking Training Materials

Get Real 156-315.82 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

Questions & Answers

100 Questions & Answers with Testing Engine

"Check Point Certified Security Expert - R82 (CCSE) Exam", also known as 156-315.82 exam, is a Checkpoint certification exam.

Pass your tests with the always up-to-date 156-315.82 Exam Engine. Your 156-315.82 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Checkpoint 156-315.82 Practice Test 12

Question 110

A remote gateway is managed normally but temporarily has no management-side Central Deployment path. An engineer is logged in locally to Gaia and has a compatible CPUSE offline package. Which gateway-local utility installs the software rather than simply changing security policy?

  1. Select gateways in SmartConsole and Install Hotfix/Jumbo
  2. Run the Central Deployment Tool from the Management Server
  3. Use CPUSE for a compatible management-server in-place upgrade
  4. Use CPUSE with the applicable local/cloud package source

Explanation

Correct Answer

D:

Use the Gaia CPUSE software package installation workflow with the approved local or cloud package source.

Incorrect Answers

A:

A central SmartConsole push cannot substitute for the unavailable management-side deployment path.

B:

Launching CDT on management is unrelated when the installation must be performed locally in Gaia.

C:

Management-server CPUSE upgrade procedures target a different host role, not this gateway.

Question 111

The team has an R82 Management Server upgrade window and plans to use migrate_server. Management settings are business critical and the export could fail. The source is still healthy. Which independent recovery safeguard must exist before starting the migration?

  1. Back up the current management configuration first
  2. Export on the source and import on the destination
  3. Invoke migrate_server export from the prescribed scripts directory
  4. Export the management database before upgrading and re-import afterward

Explanation

Correct Answer

A:

Take a supported source management backup or snapshot independently of the migration export archive.

Incorrect Answers

B:

Export/import moves database content but should not be treated as the only emergency rollback.

C:

Starting migrate_server export without a backup risks losing a recoverable source state on failure.

D:

An Advanced Upgrade includes export and import but still needs a separate recovery safeguard.

Question 112

An R82 ElasticXL cluster has four physical appliances within one logical security gateway. A new engineer proposes creating four standalone SmartConsole gateway objects and installing unrelated policies to each. Which management model preserves the documented cluster identity?

  1. Create one Single Management Object for the entire cluster
  2. Install policy on the cluster single gateway object
  3. Add supported members through ElasticXL admission and cloning
  4. Expect the SMO to accept and distribute traffic to members

Explanation

Correct Answer

A:

Create and manage the ElasticXL cluster through a single logical gateway Management Object in SmartConsole.

Incorrect Answers

B:

Policy installation on one object is correct later, but first the cluster must have the right management identity.

C:

Adding members is the scale-out workflow, not creating four independent gateway identities.

D:

Traffic distribution behavior does not remove the requirement for one logical management object.

Question 113

An internal audit needs to inspect the currently synchronized R82 Access Control rulebase directly on the standby management peer. The auditors must not modify or publish policy, and the active server will remain in service. Which access method satisfies that read-only requirement?

  1. Use the Active Management Server for write operations
  2. Open the Standby Management Server in read-only SmartConsole mode
  3. Initiate changeover so a healthy standby becomes Active
  4. Open the Management High Availability status in SmartConsole

Explanation

Correct Answer

B:

Connect SmartConsole to the standby for read-only inspection; it is not the peer used for publishing changes.

Incorrect Answers

A:

Connecting to active permits editing and is unnecessary for the requested standby-readonly verification.

C:

A changeover would make the standby writable and alter the live management roles.

D:

The HA status pane reports sync state, not the detailed rulebase needed by auditors.

Question 114

A threat-prevention profile must inspect traffic involving a rotating set of external cloud-service addresses, but only when they are the protected service scope. The imported feed object already updates on gateways. Where is it applied in Threat Prevention?

  1. Place an Updatable Object in the Access Control Source column
  2. Use an Updatable Object as source or destination of an HTTPS rule
  3. Import the Updatable Object into a Destination column
  4. Use an Updatable Object in Protected Scope

Explanation

Correct Answer

D:

Set the Updatable Object as Threat Prevention Protected Scope to limit enforcement to the changing service membership.

Incorrect Answers

A:

An Access Control Source match does not define the Threat Prevention protected scope.

B:

HTTPS Inspection targeting is separate from Threat Prevention’s Protected Scope setting.

C:

An Access Control destination rule alone cannot supply the requested Threat Prevention scope.

Question 115

A branch gateway receives its external address dynamically from an ISP, and the cloud provider requests Enhanced Link Selection for its multihomed tunnel. The plan explicitly depends on a Dynamically Assigned IP Address gateway. Which design check should stop the proposed feature?

  1. Enhanced Link Selection is mandatory on all DAIP gateways before any VPN can function
  2. Enhanced Link Selection supports only tunnel-test packets, so DAIP requires additional DPD
  3. Enhanced Link Selection does not support Security Gateways with dynamically assigned IP addresses
  4. DAIP is supported if the management server installs the policy twice

Explanation

Correct Answer

C:

R82 documentation lists DAIP gateways among the configurations excluded from Enhanced Link Selection.

Incorrect Answers

A:

DAIP does not create a product requirement to use Enhanced Link Selection.

B:

Enhanced Link Selection uses interoperable monitoring and its DAIP issue is a stated platform limitation.

D:

Reinstalling a policy cannot override an unsupported gateway addressing mode.

Question 116

A low-risk R82 SmartEvent correlation definition is producing the same severity as confirmed critical threats, confusing the SOC prioritization queue. The underlying detection threshold is correct and must remain unchanged. Which event attribute should the owner adjust?

  1. Adjust its event threshold after examining the event
  2. Assign appropriate SmartEvent event severity
  3. Configure the relevant SmartEvent alert reaction
  4. Save and install the updated SmartEvent Event Policy

Explanation

Correct Answer

B:

Change the Event Definition severity to reflect the incident’s actual operational priority.

Incorrect Answers

A:

Threshold adjustment would alter detection frequency, not the configured importance of existing events.

C:

Alert reaction controls how operators are notified but not the classification in the event policy.

D:

Reinstalling unchanged event definitions cannot correct an inappropriate severity value.

Question 117

A change window will run Check Point’s Central Deployment Tool to update software on gateway members across remote branches. The installer asks to run the tool directly on a branch firewall with no management authorization. Where must the centrally controlled orchestration run?

  1. Use CPUSE with the applicable local/cloud package source
  2. Run the Central Deployment Tool from the Management Server
  3. Use supported Central Deployment parallel target selection
  4. Use the Gateway & Servers deployment actions in SmartConsole

Explanation

Correct Answer

B:

Execute the Central Deployment Tool from the Management Server with supported gateway targets and existing SIC.

Incorrect Answers

A:

Local CPUSE can install on one gateway but is not the centralized orchestration requested.

C:

Parallel deployment concerns target scheduling and does not change the management-side control point.

D:

Opening deployment actions in GUI is not a substitute for the specified CDT execution context.

Question 118

A scheduled R82 management database export is about to begin, but several engineers retain open SmartConsole sessions against the source. Publication decisions have been made and edits must now remain stable until the archive completes. Which session action is required?

  1. Close SmartConsole GUI clients on the source server
  2. Publish or discard sessions with unpublished changes
  3. Invoke migrate_server export from the prescribed scripts directory
  4. Expect the import procedure to restart Check Point services

Explanation

Correct Answer

A:

Close the source SmartConsole clients and keep changes quiesced while generating the consistent management export.

Incorrect Answers

B:

Publishing pending sessions helps establish content but does not by itself end active edit sessions.

C:

Running export before ending edits creates a risk of inconsistent database state.

D:

An import-time service restart occurs later on the destination and cannot quiesce SmartConsole edits on the source.

Question 119

During an ElasticXL cabling audit, a node’s production data ports are joined to the dedicated synchronization VLAN instead of the required network segments. The Sync ports already share a Layer 2 domain. What interface mapping must be corrected?

  1. Connect Sync ports through dedicated Layer 2 switching or VLAN
  2. Run show cluster info provision in Gaia gClish
  3. Wire data interfaces to traffic networks and Sync ports to sync domain
  4. Allow the automatic image/configuration clone from SMO

Explanation

Correct Answer

C:

Connect data interfaces to their actual traffic networks while reserving Sync ports for the cluster synchronization domain.

Incorrect Answers

A:

The Sync layer already functions; reconnecting Sync ports alone cannot repair miswired data interfaces.

B:

Inspecting provisioning state reports membership but does not correct the physical data-port topology.

D:

Automatic image cloning is unrelated to connecting the gateway’s traffic interfaces to the correct network.

Question 120

During an R82 management HA installation review, both peers have different internal IP addresses, and a technician calls the higher-address peer the primary. The deployment record shows which management server was installed first. What determines the initial primary role?

  1. Treat the first installed management server as the primary
  2. Leave the newly defined secondary Management Server in Standby
  3. Use Management HA actions to set one server to Standby
  4. Verify exactly one Active and remaining Standby status

Explanation

Correct Answer

A:

The first installed Management Server is the initial primary; addresses and later HA status do not redefine installation order.

Incorrect Answers

B:

A secondary being standby does not identify the originally installed primary peer.

C:

Collision resolution applies to two simultaneous Active nodes, not primary installation identity.

D:

Current status verification does not replace the recorded original installation order.

Check Point Certified Security Expert - R82 (CCSE) (156-315.82) Practice Tests