McAfee-Secured Website

Exam Code: Certified Platform Identity and Access Management Architect

Exam Name: Certified Platform Identity and Access Management Architect

Certification Provider: Salesforce

100% Salesforce Certified Platform Identity and Access Management Architect Guaranteed Success With Testking Training Materials

Get Real Certified Platform Identity and Access Management Architect Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

58 Questions & Answers with Testing Engine

"Certified Platform Identity and Access Management Architect Exam", also known as Certified Platform Identity and Access Management Architect exam, is a Salesforce certification exam.

Pass your tests with the always up-to-date Certified Platform Identity and Access Management Architect Exam Engine. Your Certified Platform Identity and Access Management Architect training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Salesforce Certified Platform Identity and Access Management Architect Practice Test 21

Question 0200 — Accepting Third-Party Identity in Salesforce

At fictional Seabrook Systems 20B, the team managing third-party IdP onboarding reports: An SP-initiated SAML flow loops between Salesforce and the corporate IdP because the AuthnRequest and RelayState are not preserved through a gateway. Which recurring assurance practice most directly reduces the chance of this same failure recurring?

  1. Audit registration handler relationships and contact-account ownership after community configuration changes.
  2. Include suspended and terminated users in JIT handler negative testing.
  3. Audit partner joiner-mover-leaver synchronization against the source directory.
  4. Run full SP-initiated login and destination validation after reverse-proxy or gateway changes.

Explanation

Preliminary explanations — specialist key review ON HOLD

Correct Answer

D:

Run full SP-initiated login and destination validation after reverse-proxy or gateway changes. This recurring control addresses the observed problem: An SP-initiated SAML flow loops between Salesforce and the corporate IdP because the AuthnRequest and RelayState are not preserved through a gateway. The measurable check is: Capture a full test handshake showing Salesforce request, IdP response, validated recipient and restored approved destination.

Incorrect Answers

A:

Audit registration handler relationships and contact-account ownership after community configuration changes. Run full SP-initiated login and destination validation after reverse-proxy or gateway changes.

B:

Include suspended and terminated users in JIT handler negative testing. Run full SP-initiated login and destination validation after reverse-proxy or gateway changes.

C:

Audit partner joiner-mover-leaver synchronization against the source directory. Run full SP-initiated login and destination validation after reverse-proxy or gateway changes.

Question 0201 — Accepting Third-Party Identity in Salesforce

At fictional Cedar Vale Research 21A, the team managing third-party IdP onboarding reports: An IdP-initiated SAML launch enters Salesforce but always lands users at the default home page rather than the requested case workspace. Which authorized identity-architecture correction most directly addresses this specific reported gap?

  1. Validate the permitted SAML landing/start destination and configure only approved return destinations with correct encoding.
  2. Align the IdP assertion subject with the Salesforce user's Federation ID or an explicitly supported approved matching identifier.
  3. Trace the complete SP-initiated SAML exchange and repair relay-state/redirect handling at the approved identity gateway.
  4. Implement an approved identity discovery and routing strategy that uses validated cohort attributes rather than unverified address text alone.

Explanation

Preliminary explanations — specialist key review ON HOLD

Correct Answer

A:

Validate the permitted SAML landing/start destination and configure only approved return destinations with correct encoding. Launch a test workflow from the IdP and demonstrate safe navigation to the intended authorized Salesforce resource.

Incorrect Answers

B:

Align the IdP assertion subject with the Salesforce user's Federation ID or an explicitly supported approved matching identifier. The needed correction is to validate the permitted SAML landing/start destination and configure only approved return destinations with correct encoding.

C:

Trace the complete SP-initiated SAML exchange and repair relay-state/redirect handling at the approved identity gateway. The needed correction is to validate the permitted SAML landing/start destination and configure only approved return destinations with correct encoding.

D:

Implement an approved identity discovery and routing strategy that uses validated cohort attributes rather than unverified address text alone. The needed correction is to validate the permitted SAML landing/start destination and configure only approved return destinations with correct encoding.

Question 0202 — Accepting Third-Party Identity in Salesforce

At fictional Cedar Vale Research 21A, the team managing third-party IdP onboarding reports: An IdP-initiated SAML launch enters Salesforce but always lands users at the default home page rather than the requested case workspace. Which independently observable result would best verify that the targeted identity-control gap was resolved?

  1. Show the intended partner employee is resolved consistently after a name change and unrelated users remain unmatched.
  2. Launch a test workflow from the IdP and demonstrate safe navigation to the intended authorized Salesforce resource.
  3. Exercise a suspended-user SSO attempt and verify the Salesforce account remains inactive with a traceable refusal.
  4. Reconcile current Salesforce SSO configurations to the signed issuer inventory and show a retired IdP is rejected.

Explanation

Preliminary explanations — specialist key review ON HOLD

Correct Answer

B:

Launch a test workflow from the IdP and demonstrate safe navigation to the intended authorized Salesforce resource. The corresponding correction is to validate the permitted SAML landing/start destination and configure only approved return destinations with correct encoding.

Incorrect Answers

A:

Show the intended partner employee is resolved consistently after a name change and unrelated users remain unmatched. The useful check here is whether launch a test workflow from the IdP and demonstrate safe navigation to the intended authorized Salesforce resource.

C:

Exercise a suspended-user SSO attempt and verify the Salesforce account remains inactive with a traceable refusal. The useful check here is whether launch a test workflow from the IdP and demonstrate safe navigation to the intended authorized Salesforce resource.

D:

Reconcile current Salesforce SSO configurations to the signed issuer inventory and show a retired IdP is rejected. The useful check here is whether launch a test workflow from the IdP and demonstrate safe navigation to the intended authorized Salesforce resource.

Question 0203 — Accepting Third-Party Identity in Salesforce

At fictional Cedar Vale Research 21A, the team managing third-party IdP onboarding reports: An IdP-initiated SAML launch enters Salesforce but always lands users at the default home page rather than the requested case workspace. Which security architecture principle most directly explains the remediation needed for these facts?

  1. Third-party identity acceptance depends on deterministic local user mapping in addition to successful SAML verification.
  2. Social federation principal identity should not depend solely on a changeable shared email attribute.
  3. Authentication destination routing must remain constrained to trusted application locations.
  4. SAML destination and audience validation must be environment-specific, not just signature-correct.

Explanation

Preliminary explanations — specialist key review ON HOLD

Correct Answer

C:

Authentication destination routing must remain constrained to trusted application locations. Launch a test workflow from the IdP and demonstrate safe navigation to the intended authorized Salesforce resource.

Incorrect Answers

A:

Third-party identity acceptance depends on deterministic local user mapping in addition to successful SAML verification. Authentication destination routing must remain constrained to trusted application locations.

B:

Social federation principal identity should not depend solely on a changeable shared email attribute. Authentication destination routing must remain constrained to trusted application locations.

D:

SAML destination and audience validation must be environment-specific, not just signature-correct. Authentication destination routing must remain constrained to trusted application locations.

Question 0204 — Accepting Third-Party Identity in Salesforce

At fictional Cedar Vale Research 21A, the team managing third-party IdP onboarding reports: An IdP-initiated SAML launch enters Salesforce but always lands users at the default home page rather than the requested case workspace. If this condition remains uncorrected, which concrete failure or exposure follows most directly?

  1. Orphaned or wrongly linked external users can inherit unintended community records.
  2. Automatic account reactivation can undo administrative security decisions during identity federation.
  3. Misrouting can send authentication context to the wrong provider or create persistent login failures.
  4. Unsafe or ignored destination parameters can enable open redirects or break user workflows.

Explanation

Preliminary explanations — specialist key review ON HOLD

Correct Answer

D:

Unsafe or ignored destination parameters can enable open redirects or break user workflows. Validate the permitted SAML landing/start destination and configure only approved return destinations with correct encoding.

Incorrect Answers

A:

Orphaned or wrongly linked external users can inherit unintended community records. Unsafe or ignored destination parameters can enable open redirects or break user workflows.

B:

Automatic account reactivation can undo administrative security decisions during identity federation. Unsafe or ignored destination parameters can enable open redirects or break user workflows.

C:

Misrouting can send authentication context to the wrong provider or create persistent login failures. Unsafe or ignored destination parameters can enable open redirects or break user workflows.

Question 0205 — Accepting Third-Party Identity in Salesforce

At fictional Cedar Vale Research 21A, the team managing third-party IdP onboarding reports: An IdP-initiated SAML launch enters Salesforce but always lands users at the default home page rather than the requested case workspace. Which recurring assurance practice most directly reduces the chance of this same failure recurring?

  1. Periodically verify IdP-initiated destinations and rejected untrusted URLs in regression tests.
  2. Audit registration handler relationships and contact-account ownership after community configuration changes.
  3. Audit partner joiner-mover-leaver synchronization against the source directory.
  4. Check sandbox/production metadata independently after My Domain and domain-management changes.

Explanation

Preliminary explanations — specialist key review ON HOLD

Correct Answer

A:

Periodically verify IdP-initiated destinations and rejected untrusted URLs in regression tests. This recurring control addresses the observed problem: An IdP-initiated SAML launch enters Salesforce but always lands users at the default home page rather than the requested case workspace. The measurable check is: Launch a test workflow from the IdP and demonstrate safe navigation to the intended authorized Salesforce resource.

Incorrect Answers

B:

Audit registration handler relationships and contact-account ownership after community configuration changes. Periodically verify IdP-initiated destinations and rejected untrusted URLs in regression tests.

C:

Audit partner joiner-mover-leaver synchronization against the source directory. Periodically verify IdP-initiated destinations and rejected untrusted URLs in regression tests.

D:

Check sandbox/production metadata independently after My Domain and domain-management changes. Periodically verify IdP-initiated destinations and rejected untrusted URLs in regression tests.

Question 0206 — Accepting Third-Party Identity in Salesforce

At fictional Hollowbrook Logistics 21B, the team managing Experience Cloud customer authentication reports: An IdP-initiated SAML launch enters Salesforce but always lands users at the default home page rather than the requested case workspace. Which authorized identity-architecture correction most directly addresses this specific reported gap?

  1. Align the IdP assertion subject with the Salesforce user's Federation ID or an explicitly supported approved matching identifier.
  2. Validate the permitted SAML landing/start destination and configure only approved return destinations with correct encoding.
  3. Bind social identity to provider issuer and stable subject with explicit user consent and verified linking workflow.
  4. Update the external IdP service-provider configuration to the supported current Salesforce ACS, entity identifier and production My Domain.

Explanation

Preliminary explanations — specialist key review ON HOLD

Correct Answer

B:

Validate the permitted SAML landing/start destination and configure only approved return destinations with correct encoding. Launch a test workflow from the IdP and demonstrate safe navigation to the intended authorized Salesforce resource.

Incorrect Answers

A:

Align the IdP assertion subject with the Salesforce user's Federation ID or an explicitly supported approved matching identifier. The needed correction is to validate the permitted SAML landing/start destination and configure only approved return destinations with correct encoding.

C:

Bind social identity to provider issuer and stable subject with explicit user consent and verified linking workflow. The needed correction is to validate the permitted SAML landing/start destination and configure only approved return destinations with correct encoding.

D:

Update the external IdP service-provider configuration to the supported current Salesforce ACS, entity identifier and production My Domain. The needed correction is to validate the permitted SAML landing/start destination and configure only approved return destinations with correct encoding.

Question 0207 — Accepting Third-Party Identity in Salesforce

At fictional Hollowbrook Logistics 21B, the team managing Experience Cloud customer authentication reports: An IdP-initiated SAML launch enters Salesforce but always lands users at the default home page rather than the requested case workspace. Which independently observable result would best verify that the targeted identity-control gap was resolved?

  1. Complete a test registration that yields a correctly related partner contact and appropriately scoped portal user.
  2. Exercise a suspended-user SSO attempt and verify the Salesforce account remains inactive with a traceable refusal.
  3. Launch a test workflow from the IdP and demonstrate safe navigation to the intended authorized Salesforce resource.
  4. Test representative employee and partner cohorts and confirm each reaches only their approved provider without cross-domain leakage.

Explanation

Preliminary explanations — specialist key review ON HOLD

Correct Answer

C:

Launch a test workflow from the IdP and demonstrate safe navigation to the intended authorized Salesforce resource. The corresponding correction is to validate the permitted SAML landing/start destination and configure only approved return destinations with correct encoding.

Incorrect Answers

A:

Complete a test registration that yields a correctly related partner contact and appropriately scoped portal user. The useful check here is whether launch a test workflow from the IdP and demonstrate safe navigation to the intended authorized Salesforce resource.

B:

Exercise a suspended-user SSO attempt and verify the Salesforce account remains inactive with a traceable refusal. The useful check here is whether launch a test workflow from the IdP and demonstrate safe navigation to the intended authorized Salesforce resource.

D:

Test representative employee and partner cohorts and confirm each reaches only their approved provider without cross-domain leakage. The useful check here is whether launch a test workflow from the IdP and demonstrate safe navigation to the intended authorized Salesforce resource.

Question 0208 — Accepting Third-Party Identity in Salesforce

At fictional Hollowbrook Logistics 21B, the team managing Experience Cloud customer authentication reports: An IdP-initiated SAML launch enters Salesforce but always lands users at the default home page rather than the requested case workspace. Which security architecture principle most directly explains the remediation needed for these facts?

  1. External community identities must be anchored to the correct customer or partner business context.
  2. Account provisioning method selection must cover the full user lifecycle, not only first authentication.
  3. SAML destination and audience validation must be environment-specific, not just signature-correct.
  4. Authentication destination routing must remain constrained to trusted application locations.

Explanation

Preliminary explanations — specialist key review ON HOLD

Correct Answer

D:

Authentication destination routing must remain constrained to trusted application locations. Launch a test workflow from the IdP and demonstrate safe navigation to the intended authorized Salesforce resource.

Incorrect Answers

A:

External community identities must be anchored to the correct customer or partner business context. Authentication destination routing must remain constrained to trusted application locations.

B:

Account provisioning method selection must cover the full user lifecycle, not only first authentication. Authentication destination routing must remain constrained to trusted application locations.

C:

SAML destination and audience validation must be environment-specific, not just signature-correct. Authentication destination routing must remain constrained to trusted application locations.

Question 0209 — Accepting Third-Party Identity in Salesforce

At fictional Hollowbrook Logistics 21B, the team managing Experience Cloud customer authentication reports: An IdP-initiated SAML launch enters Salesforce but always lands users at the default home page rather than the requested case workspace. If this condition remains uncorrected, which concrete failure or exposure follows most directly?

  1. Unsafe or ignored destination parameters can enable open redirects or break user workflows.
  2. Broken relay handling creates infinite login loops or unsafe post-login redirects.
  3. Automatic account reactivation can undo administrative security decisions during identity federation.
  4. Incomplete audit trails cause repeated outages and uncertain security incident attribution.

Explanation

Preliminary explanations — specialist key review ON HOLD

Correct Answer

A:

Unsafe or ignored destination parameters can enable open redirects or break user workflows. Validate the permitted SAML landing/start destination and configure only approved return destinations with correct encoding.

Incorrect Answers

B:

Broken relay handling creates infinite login loops or unsafe post-login redirects. Unsafe or ignored destination parameters can enable open redirects or break user workflows.

C:

Automatic account reactivation can undo administrative security decisions during identity federation. Unsafe or ignored destination parameters can enable open redirects or break user workflows.

D:

Incomplete audit trails cause repeated outages and uncertain security incident attribution. Unsafe or ignored destination parameters can enable open redirects or break user workflows.

Question 0210 — Accepting Third-Party Identity in Salesforce

At fictional Hollowbrook Logistics 21B, the team managing Experience Cloud customer authentication reports: An IdP-initiated SAML launch enters Salesforce but always lands users at the default home page rather than the requested case workspace. Which recurring assurance practice most directly reduces the chance of this same failure recurring?

  1. Run full SP-initiated login and destination validation after reverse-proxy or gateway changes.
  2. Periodically verify IdP-initiated destinations and rejected untrusted URLs in regression tests.
  3. Review correlated authentication logs and retention coverage after SSO policy updates.
  4. Monitor issuer and JWKS metadata drift as part of OIDC tenant-change governance.

Explanation

Preliminary explanations — specialist key review ON HOLD

Correct Answer

B:

Periodically verify IdP-initiated destinations and rejected untrusted URLs in regression tests. This recurring control addresses the observed problem: An IdP-initiated SAML launch enters Salesforce but always lands users at the default home page rather than the requested case workspace. The measurable check is: Launch a test workflow from the IdP and demonstrate safe navigation to the intended authorized Salesforce resource.

Incorrect Answers

A:

Run full SP-initiated login and destination validation after reverse-proxy or gateway changes. Periodically verify IdP-initiated destinations and rejected untrusted URLs in regression tests.

C:

Review correlated authentication logs and retention coverage after SSO policy updates. Periodically verify IdP-initiated destinations and rejected untrusted URLs in regression tests.

D:

Monitor issuer and JWKS metadata drift as part of OIDC tenant-change governance. Periodically verify IdP-initiated destinations and rejected untrusted URLs in regression tests.

Certified Platform Identity and Access Management Architect Practice Tests