McAfee-Secured Website

Exam Code: PRINCE2 7 Practitioner

Exam Name: PRINCE2 7 Practitioner

Certification Provider: PRINCE2

100% PRINCE2 PRINCE2 7 Practitioner Guaranteed Success With Testking Training Materials

Get Real PRINCE2 7 Practitioner Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

93 Questions & Answers with Testing Engine

"PRINCE2 7 Practitioner Exam", also known as PRINCE2 7 Practitioner exam, is a PRINCE2 certification exam.

Pass your tests with the always up-to-date PRINCE2 7 Practitioner Exam Engine. Your PRINCE2 7 Practitioner training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

PRINCE2 PRINCE2 7 Practitioner Practice Test 38

Question 370

The board requests proof that this project fault is controlled: A university renovation project uses one generic quality checklist for chemical storage, office furniture and laboratory instruments. Which result is most relevant?

  1. User representatives confirm practical workflow success with traceable test outcomes.
  2. Chemical storage, furniture and instruments each have relevant recorded test outcomes.
  3. The accepted equipment demonstrates compliant service access in addition to power output.
  4. The delivered sensors pass documented calibration tests against approved numeric thresholds.

Explanation

Correct Answer

B:

The strongest confirmation is: Chemical storage, furniture and instruments each have relevant recorded test outcomes. It is evidence for the specific corrective step—Create product-specific quality criteria and appropriate test methods for each class of deliverable.—rather than a generic system-health signal.

Incorrect Answers

A:

The offered finding is relevant when technical quality tests have not covered complete user acceptance expectations. Here the acceptance test must show that chemical storage, furniture and instruments each have relevant recorded test outcomes.

C:

The offered finding is relevant when an agreed maintainability quality criterion has been omitted from test coverage. Here the acceptance test must show that chemical storage, furniture and instruments each have relevant recorded test outcomes.

D:

It would be evidence for a problem in which customer quality expectations have not been translated into measurable product quality criteria. It does not verify that chemical storage, furniture and instruments each have relevant recorded test outcomes.

Question 371

A project team is examining a control failure: A university renovation project uses one generic quality checklist for chemical storage, office furniture and laboratory instruments. What is the most plausible explanation?

  1. Quality methods have not been tailored to the different product purposes and regulatory demands.
  2. Product status has been confused with completed development work rather than approved quality acceptance.
  3. Technical quality tests have not covered complete user acceptance expectations.
  4. An unsupported supplier assertion is being treated as controlled quality evidence.

Explanation

Correct Answer

A:

The failure is explained by: Quality methods have not been tailored to the different product purposes and regulatory demands. It supports the targeted intervention: Create product-specific quality criteria and appropriate test methods for each class of deliverable. The observable test of success is: Chemical storage, furniture and instruments each have relevant recorded test outcomes.

Incorrect Answers

B:

There could be such a cause if product status has been confused with completed development work rather than approved quality acceptance. The stated incident instead arises because quality methods have not been tailored to the different product purposes and regulatory demands.

C:

The proposed diagnosis concerns a problem where technical quality tests have not covered complete user acceptance expectations. The facts here indicate that quality methods have not been tailored to the different product purposes and regulatory demands.

D:

This diagnosis fits a situation in which an unsupported supplier assertion is being treated as controlled quality evidence. Here, quality methods have not been tailored to the different product purposes and regulatory demands.

Question 372

Choose the most relevant preventive check for this PRINCE2 project situation: A university renovation project uses one generic quality checklist for chemical storage, office furniture and laboratory instruments.

  1. Prevent product acceptance when mandatory quality criteria lack valid evidence.
  2. Review product register accuracy before stage boundary and closure decisions.
  3. Review product-specific regulatory and functional constraints during quality planning.
  4. Treat high-impact user acceptance as a launch authorization condition.

Explanation

Correct Answer

C:

This practice reduces the documented recurrence risk: Review product-specific regulatory and functional constraints during quality planning. The original root fault was: Quality methods have not been tailored to the different product purposes and regulatory demands. The practical health indicator is: Chemical storage, furniture and instruments each have relevant recorded test outcomes.

Incorrect Answers

A:

The option addresses cases in which product status has been confused with completed development work rather than approved quality acceptance. In the reported incident, quality methods have not been tailored to the different product purposes and regulatory demands instead.

B:

This safeguard is useful when product configuration and quality status are not maintained as a trustworthy management record. It does not prevent the present fault, where quality methods have not been tailored to the different product purposes and regulatory demands.

D:

This safeguard is useful when quality planning schedules essential user acceptance after irreversible release exposure. It does not prevent the present fault, where quality methods have not been tailored to the different product purposes and regulatory demands.

Question 373

A practitioner must act on this project issue: A hospital booking system passes technical performance tests but fails clinician workflow trials. Which intervention most directly addresses the failure?

  1. Add the access and maintainability criterion to the product description and schedule a suitable review.
  2. Record outstanding defects, assess the relevant acceptance criteria and seek correction or authorized disposition before acceptance.
  3. Classify each defect by agreed criteria and manage concessions or repairs through the issue and quality controls.
  4. Agree and test clinician workflow criteria in addition to technical performance before acceptance.

Explanation

Correct Answer

D:

Agree and test clinician workflow criteria in addition to technical performance before acceptance. This is the appropriate intervention because Technical quality tests have not covered complete user acceptance expectations. The specific outcome to verify is: User representatives confirm practical workflow success with traceable test outcomes.

Incorrect Answers

A:

That action tackles a problem where an agreed maintainability quality criterion has been omitted from test coverage. The reported issue is instead that technical quality tests have not covered complete user acceptance expectations.

B:

This change addresses a situation in which product status has been confused with completed development work rather than approved quality acceptance. It leaves the current failure unresolved because technical quality tests have not covered complete user acceptance expectations.

C:

That action tackles a problem where defect handling is not proportionate to acceptance tolerances and authorized concessions. The reported issue is instead that technical quality tests have not covered complete user acceptance expectations.

Question 374

A PRINCE2 practitioner has implemented a correction to this situation: A hospital booking system passes technical performance tests but fails clinician workflow trials. Which outcome demonstrates that the correction worked?

  1. User representatives confirm practical workflow success with traceable test outcomes.
  2. The delivered sensors pass documented calibration tests against approved numeric thresholds.
  3. Both supplier and user see the same approved quality method and reproducible results.
  4. The quality record shows each criterion met or an authorized nonconformity resolution.

Explanation

Correct Answer

A:

This finding directly demonstrates the intended result: User representatives confirm practical workflow success with traceable test outcomes. It tests whether the chosen remediation—Agree and test clinician workflow criteria in addition to technical performance before acceptance.—has addressed the cause: Technical quality tests have not covered complete user acceptance expectations.

Incorrect Answers

B:

The observation relates to a problem where customer quality expectations have not been translated into measurable product quality criteria; the required finding here is that user representatives confirm practical workflow success with traceable test outcomes.

C:

The offered finding is relevant when the quality management approach and test method baselines are not being controlled across suppliers. Here the acceptance test must show that user representatives confirm practical workflow success with traceable test outcomes.

D:

That outcome could matter in a case where quality status is based on activity count rather than acceptance against defined product criteria, but the present check needs to show that user representatives confirm practical workflow success with traceable test outcomes.

Question 375

A project assurance reviewer investigates the following: A hospital booking system passes technical performance tests but fails clinician workflow trials. What is the root cause?

  1. The quality management approach and test method baselines are not being controlled across suppliers.
  2. Technical quality tests have not covered complete user acceptance expectations.
  3. Customer quality expectations have not been translated into measurable product quality criteria.
  4. Quality status is based on activity count rather than acceptance against defined product criteria.

Explanation

Correct Answer

B:

The identified root cause is: Technical quality tests have not covered complete user acceptance expectations. The appropriate correction is: Agree and test clinician workflow criteria in addition to technical performance before acceptance. A separate validation must then show: User representatives confirm practical workflow success with traceable test outcomes.

Incorrect Answers

A:

The mechanism could explain a fault where the quality management approach and test method baselines are not being controlled across suppliers; it does not account for the current condition, where technical quality tests have not covered complete user acceptance expectations.

C:

The proposed diagnosis concerns a problem where customer quality expectations have not been translated into measurable product quality criteria. The facts here indicate that technical quality tests have not covered complete user acceptance expectations.

D:

The mechanism could explain a fault where quality status is based on activity count rather than acceptance against defined product criteria; it does not account for the current condition, where technical quality tests have not covered complete user acceptance expectations.

Question 376

A project assurance review examines the cause of this problem: A hospital booking system passes technical performance tests but fails clinician workflow trials. What preventive action should be introduced?

  1. Validate quality criteria with both specialist suppliers and intended users.
  2. Audit evidence completeness before changing quality defect status to closed.
  3. Reconcile product descriptions with quality-register schedules at every checkpoint.
  4. Require independence and reviewer competence for high-risk product quality activities.

Explanation

Correct Answer

A:

The lasting control is: Validate quality criteria with both specialist suppliers and intended users. It addresses recurrence of this mechanism: Technical quality tests have not covered complete user acceptance expectations. A successful system should still demonstrate: User representatives confirm practical workflow success with traceable test outcomes.

Incorrect Answers

B:

The control would be appropriate if the quality control process cannot demonstrate that fixes actually satisfy acceptance criteria; the issue here is that technical quality tests have not covered complete user acceptance expectations.

C:

This safeguard is useful when the quality register has not been used to plan and track verification activities. It does not prevent the present fault, where technical quality tests have not covered complete user acceptance expectations.

D:

This measure addresses a risk where the quality method lacks appropriate independent review for a high-consequence product. The recurring failure here arises because technical quality tests have not covered complete user acceptance expectations.

Question 377

Apply PRINCE2 to this project decision: An engineering team repeatedly closes defects without preserving evidence of corrective retesting. Which response is best supported by the method?

  1. Create product-specific quality criteria and appropriate test methods for each class of deliverable.
  2. Require test reruns and recorded results linked to each defect and product version.
  3. Agree accuracy and calibration acceptance criteria with the senior user and supplier before procurement.
  4. Move acceptance testing into the appropriate stage plan and verify the product before operational deployment.

Explanation

Correct Answer

B:

The case requires this change: Require test reruns and recorded results linked to each defect and product version. The actual failure mechanism is: The quality control process cannot demonstrate that fixes actually satisfy acceptance criteria. A meaningful acceptance check is: Closed defects include reproducible passing evidence for the exact corrected build.

Incorrect Answers

A:

When quality methods have not been tailored to the different product purposes and regulatory demands, “Create product-specific quality criteria and appropriate test methods for each class of deliverable” could be justified. Here, the quality control process cannot demonstrate that fixes actually satisfy acceptance criteria, so this is not the needed correction.

C:

“Agree accuracy and calibration acceptance criteria with the senior user and supplier before procurement” is useful when customer quality expectations have not been translated into measurable product quality criteria. It does not resolve the current problem, in which the quality control process cannot demonstrate that fixes actually satisfy acceptance criteria.

D:

That action tackles a problem where quality planning schedules essential user acceptance after irreversible release exposure. The reported issue is instead that the quality control process cannot demonstrate that fixes actually satisfy acceptance criteria.

Question 378

Following the agreed corrective action for this project concern—An engineering team repeatedly closes defects without preserving evidence of corrective retesting.—which evidence would verify a suitable outcome?

  1. Chemical storage, furniture and instruments each have relevant recorded test outcomes.
  2. Closed defects include reproducible passing evidence for the exact corrected build.
  3. Reviewers can see all due quality activities and the outcome of each completed review.
  4. A competent reviewer signs off the design against defined safety and interface criteria.

Explanation

Correct Answer

B:

Successful remediation is demonstrated when: Closed defects include reproducible passing evidence for the exact corrected build. That result connects to the targeted action: Require test reruns and recorded results linked to each defect and product version. The previously observed defect was: The quality control process cannot demonstrate that fixes actually satisfy acceptance criteria.

Incorrect Answers

A:

The observation relates to a problem where quality methods have not been tailored to the different product purposes and regulatory demands; the required finding here is that closed defects include reproducible passing evidence for the exact corrected build.

C:

It would be evidence for a problem in which the quality register has not been used to plan and track verification activities. It does not verify that closed defects include reproducible passing evidence for the exact corrected build.

D:

The observation relates to a problem where the quality method lacks appropriate independent review for a high-consequence product; the required finding here is that closed defects include reproducible passing evidence for the exact corrected build.

Question 379

Which management-control deficiency underlies the following situation? An engineering team repeatedly closes defects without preserving evidence of corrective retesting.

  1. The quality method lacks appropriate independent review for a high-consequence product.
  2. The quality management approach and test method baselines are not being controlled across suppliers.
  3. The quality control process cannot demonstrate that fixes actually satisfy acceptance criteria.
  4. Technical quality tests have not covered complete user acceptance expectations.

Explanation

Correct Answer

C:

This mechanism accounts for the observation: The quality control process cannot demonstrate that fixes actually satisfy acceptance criteria. Address it by implementing: Require test reruns and recorded results linked to each defect and product version. Confirm the fix through: Closed defects include reproducible passing evidence for the exact corrected build.

Incorrect Answers

A:

There could be such a cause if the quality method lacks appropriate independent review for a high-consequence product. The stated incident instead arises because the quality control process cannot demonstrate that fixes actually satisfy acceptance criteria.

B:

The cause in this option would matter if the quality management approach and test method baselines are not being controlled across suppliers. The reported failure instead arises because the quality control process cannot demonstrate that fixes actually satisfy acceptance criteria.

D:

This diagnosis fits a situation in which technical quality tests have not covered complete user acceptance expectations. Here, the quality control process cannot demonstrate that fixes actually satisfy acceptance criteria.

Question 380

The project team has corrected the following defect: An engineering team repeatedly closes defects without preserving evidence of corrective retesting. Which future assurance check should be added?

  1. Require objective quality evidence and independent sampling where risk warrants it.
  2. Audit evidence completeness before changing quality defect status to closed.
  3. Reconcile product descriptions with quality-register schedules at every checkpoint.
  4. Review acceptance evidence rather than test volume in quality reporting.

Explanation

Correct Answer

B:

To prevent the same issue, apply this check: Audit evidence completeness before changing quality defect status to closed. The risk to contain is: The quality control process cannot demonstrate that fixes actually satisfy acceptance criteria. Verify control effectiveness using: Closed defects include reproducible passing evidence for the exact corrected build.

Incorrect Answers

A:

The control would be appropriate if an unsupported supplier assertion is being treated as controlled quality evidence; the issue here is that the quality control process cannot demonstrate that fixes actually satisfy acceptance criteria.

C:

The proposed routine targets situations in which the quality register has not been used to plan and track verification activities. To prevent the reported problem, the team must address the fact that the quality control process cannot demonstrate that fixes actually satisfy acceptance criteria.

D:

This measure addresses a risk where quality status is based on activity count rather than acceptance against defined product criteria. The recurring failure here arises because the quality control process cannot demonstrate that fixes actually satisfy acceptance criteria.

PRINCE2 7 Practitioner Practice Tests