McAfee-Secured Website

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

100% Nokia 4A0-D01 Guaranteed Success With Testking Training Materials

Get Real 4A0-D01 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

61 Questions & Answers with Testing Engine

"Nokia Data Center Fabric Fundamentals Exam", also known as 4A0-D01 exam, is a Nokia certification exam.

Pass your tests with the always up-to-date 4A0-D01 Exam Engine. Your 4A0-D01 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 70

Question 690

At Pinebrook Rail Logistics, while rolling out a scoped interface filter, the data center fabric team observes: An ACL change is committed but counters indicate no matching packets. What test result proves the affected fabric function now works?

  1. A controlled port state change is identifiable by interface and timestamp
  2. Management restrictions remain in effect while the tenant forwarding defect is resolved
  3. The incident record distinguishes interface status from last-report time
  4. A controlled test packet increases the intended rule counter and follows the selected action

Explanation

Correct Answer

D:

At Pinebrook Rail Logistics, while rolling out a scoped interface filter, a controlled test packet increases the intended rule counter and follows the selected action. This is linked directly to the observed symptom (An ACL change is committed but counters indicate no matching packets) and cannot be replaced by an unrelated healthy dashboard.

Incorrect Answers

A:

At Pinebrook Rail Logistics, while rolling out a scoped interface filter, this option proposes: A controlled port state change is identifiable by interface and timestamp. This option assumes the other problem (An engineer cannot correlate a fabric alert to a specific interface) is present. The case instead describes An ACL change is committed but counters indicate no matching packets, for which the causal issue is The test traffic does not traverse the attached interface or match the rule fields.

B:

At Pinebrook Rail Logistics, while rolling out a scoped interface filter, this option proposes: Management restrictions remain in effect while the tenant forwarding defect is resolved. It tests a different symptom: An operator enables a broad system ACL as a quick workaround to an unrelated data-plane incident. For the observed case, the relevant distinction is The test traffic does not traverse the attached interface or match the rule fields, with verification: A controlled test packet increases the intended rule counter and follows the selected action.

C:

At Pinebrook Rail Logistics, while rolling out a scoped interface filter, this option proposes: The incident record distinguishes interface status from last-report time. The option describes a different failure mode: A dashboard treats a stale telemetry timestamp as proof that a link is down. It would address Missing fresh monitoring data was confused with actual interface operational state, but here the case reports An ACL change is committed but counters indicate no matching packets. The current required evidence is: A controlled test packet increases the intended rule counter and follows the selected action.

Question 691

At Pinebrook Rail Logistics, while rolling out a scoped interface filter, the data center fabric team observes: An ACL change is committed but counters indicate no matching packets. What specific misconfiguration or design error is most likely?

  1. The test traffic does not traverse the attached interface or match the rule fields
  2. System control-plane filtering was confused with the interface data-plane ACL
  3. The collection pipeline merges configured and operational paths without identifying their source
  4. The monitoring workflow has no explicit capture expiry or cleanup gate

Explanation

Correct Answer

A:

At Pinebrook Rail Logistics, while rolling out a scoped interface filter, for Pinebrook Rail Logistics, investigate this cause first: The test traffic does not traverse the attached interface or match the rule fields. It is directly linked to the observed symptom rather than another service issue.

Incorrect Answers

B:

At Pinebrook Rail Logistics, while rolling out a scoped interface filter, this option proposes: System control-plane filtering was confused with the interface data-plane ACL. The option describes a different failure mode: An engineer puts a management-plane filter on a tenant data port expecting to protect the CPU. It would address System control-plane filtering was confused with the interface data-plane ACL, but here the case reports An ACL change is committed but counters indicate no matching packets. The current required evidence is: A controlled test packet increases the intended rule counter and follows the selected action.

C:

At Pinebrook Rail Logistics, while rolling out a scoped interface filter, this option proposes: The collection pipeline merges configured and operational paths without identifying their source. That choice would be more relevant when this different symptom occurs: Operators cannot distinguish configuration changes from live operational state in JSON reports. The present scenario instead points to: The test traffic does not traverse the attached interface or match the rule fields. The correct resolution has its own verification outcome: A controlled test packet increases the intended rule counter and follows the selected action.

D:

At Pinebrook Rail Logistics, while rolling out a scoped interface filter, this option proposes: The monitoring workflow has no explicit capture expiry or cleanup gate. This is a valid category of fabric maintenance for another scenario (A temporary packet capture remains enabled long after incident closure), not the targeted action for Pinebrook Rail Logistics. The distinction is the actual cause: The test traffic does not traverse the attached interface or match the rule fields.

Question 692

At Pinebrook Rail Logistics, while rolling out a scoped interface filter, the data center fabric team observes: An ACL change is committed but counters indicate no matching packets. What repeatable acceptance check would reduce recurrence?

  1. Record traffic-path assumptions beside ACL counter tests
  2. Apply time-bounded authorization and cleanup checks to traffic captures
  3. Review management-plane versus transit-plane filters separately
  4. Require policy-domain classification before emergency ACL edits

Explanation

Correct Answer

A:

At Pinebrook Rail Logistics, while rolling out a scoped interface filter, the preventive control is: Record traffic-path assumptions beside ACL counter tests. It catches the same mechanism (The test traffic does not traverse the attached interface or match the rule fields) before the symptom recurs. An appropriate regression observation is: A controlled test packet increases the intended rule counter and follows the selected action.

Incorrect Answers

B:

At Pinebrook Rail Logistics, while rolling out a scoped interface filter, this option proposes: Apply time-bounded authorization and cleanup checks to traffic captures. That choice would be more relevant when this different symptom occurs: A temporary packet capture remains enabled long after incident closure. The present scenario instead points to: The test traffic does not traverse the attached interface or match the rule fields. The correct resolution has its own verification outcome: A controlled test packet increases the intended rule counter and follows the selected action.

C:

At Pinebrook Rail Logistics, while rolling out a scoped interface filter, this option proposes: Review management-plane versus transit-plane filters separately. This is a valid category of fabric maintenance for another scenario (An engineer puts a management-plane filter on a tenant data port expecting to protect the CPU), not the targeted action for Pinebrook Rail Logistics. The distinction is the actual cause: The test traffic does not traverse the attached interface or match the rule fields.

D:

At Pinebrook Rail Logistics, while rolling out a scoped interface filter, this option proposes: Require policy-domain classification before emergency ACL edits. Although related to Logging, monitoring, filters and ACLs, the proposed change fits another mechanism: The proposed control change conflates management access policy with tenant forwarding policy. The evidence in the current case requires a different result: A controlled test packet increases the intended rule counter and follows the selected action.

Question 693

At Woodcrest Digital Commerce, while reviewing a packet-capture request, the data center fabric team observes: A capture filter produces an empty trace for traffic known to cross the switch. Which action resolves the identified fabric-management issue?

  1. Query current local interface state and assess telemetry collection separately
  2. Correct the supported capture-filter match and measurement scope
  3. Read and label model-backed configuration and state fields separately
  4. Disable the unneeded capture and verify normal monitoring configuration remains

Explanation

Correct Answer

B:

At Woodcrest Digital Commerce, while reviewing a packet-capture request, for Woodcrest Digital Commerce, the applicable change is: Correct the supported capture-filter match and measurement scope. The causal issue is: The capture match, source point or protocol selection excludes the intended packets. A successful validation would show: A bounded permitted test flow appears in the capture without excess unrelated traffic.

Incorrect Answers

A:

At Woodcrest Digital Commerce, while reviewing a packet-capture request, this option proposes: Query current local interface state and assess telemetry collection separately. This is a valid category of fabric maintenance for another scenario (A dashboard treats a stale telemetry timestamp as proof that a link is down), not the targeted action for Woodcrest Digital Commerce. The distinction is the actual cause: The capture match, source point or protocol selection excludes the intended packets.

C:

At Woodcrest Digital Commerce, while reviewing a packet-capture request, this option proposes: Read and label model-backed configuration and state fields separately. Using that approach would investigate Operators cannot distinguish configuration changes from live operational state in JSON reports instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The capture match, source point or protocol selection excludes the intended packets.

D:

At Woodcrest Digital Commerce, while reviewing a packet-capture request, this option proposes: Disable the unneeded capture and verify normal monitoring configuration remains. The alternative focuses on The monitoring workflow has no explicit capture expiry or cleanup gate, not on the stated defect. For this scenario the expected acceptance result would be: A bounded permitted test flow appears in the capture without excess unrelated traffic.

Question 694

At Woodcrest Digital Commerce, while reviewing a packet-capture request, the data center fabric team observes: A capture filter produces an empty trace for traffic known to cross the switch. Which result would establish that the original defect has been corrected?

  1. A bounded permitted test flow appears in the capture without excess unrelated traffic
  2. A safe test event arrives at the remote collector with expected device identity
  3. No further unapproved packet collection occurs after closure
  4. A controlled port state change is identifiable by interface and timestamp

Explanation

Correct Answer

A:

At Woodcrest Digital Commerce, while reviewing a packet-capture request, this result is the relevant closure evidence: A bounded permitted test flow appears in the capture without excess unrelated traffic. It checks the effect of: Correct the supported capture-filter match and measurement scope. The underlying issue was: The capture match, source point or protocol selection excludes the intended packets.

Incorrect Answers

B:

At Woodcrest Digital Commerce, while reviewing a packet-capture request, this option proposes: A safe test event arrives at the remote collector with expected device identity. Using that approach would investigate A remote log collector receives no fabric events despite healthy IP reachability instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The capture match, source point or protocol selection excludes the intended packets.

C:

At Woodcrest Digital Commerce, while reviewing a packet-capture request, this option proposes: No further unapproved packet collection occurs after closure. The alternative focuses on The monitoring workflow has no explicit capture expiry or cleanup gate, not on the stated defect. For this scenario the expected acceptance result would be: A bounded permitted test flow appears in the capture without excess unrelated traffic.

D:

At Woodcrest Digital Commerce, while reviewing a packet-capture request, this option proposes: A controlled port state change is identifiable by interface and timestamp. This option assumes the other problem (An engineer cannot correlate a fabric alert to a specific interface) is present. The case instead describes A capture filter produces an empty trace for traffic known to cross the switch, for which the causal issue is The capture match, source point or protocol selection excludes the intended packets.

Question 695

At Woodcrest Digital Commerce, while reviewing a packet-capture request, the data center fabric team observes: A capture filter produces an empty trace for traffic known to cross the switch. Which root cause fits the reported state?

  1. The proposed control change conflates management access policy with tenant forwarding policy
  2. The capture match, source point or protocol selection excludes the intended packets
  3. System control-plane filtering was confused with the interface data-plane ACL
  4. Missing fresh monitoring data was confused with actual interface operational state

Explanation

Correct Answer

B:

At Woodcrest Digital Commerce, while reviewing a packet-capture request, the specific mechanism is: The capture match, source point or protocol selection excludes the intended packets. It explains the reported state: A capture filter produces an empty trace for traffic known to cross the switch. The targeted corrective action is: Correct the supported capture-filter match and measurement scope.

Incorrect Answers

A:

At Woodcrest Digital Commerce, while reviewing a packet-capture request, this option proposes: The proposed control change conflates management access policy with tenant forwarding policy. Using that approach would investigate An operator enables a broad system ACL as a quick workaround to an unrelated data-plane incident instead. No evidence for that separate failure is supplied here; the reported case is consistent with: The capture match, source point or protocol selection excludes the intended packets.

C:

At Woodcrest Digital Commerce, while reviewing a packet-capture request, this option proposes: System control-plane filtering was confused with the interface data-plane ACL. This option assumes the other problem (An engineer puts a management-plane filter on a tenant data port expecting to protect the CPU) is present. The case instead describes A capture filter produces an empty trace for traffic known to cross the switch, for which the causal issue is The capture match, source point or protocol selection excludes the intended packets.

D:

At Woodcrest Digital Commerce, while reviewing a packet-capture request, this option proposes: Missing fresh monitoring data was confused with actual interface operational state. It tests a different symptom: A dashboard treats a stale telemetry timestamp as proof that a link is down. For the observed case, the relevant distinction is The capture match, source point or protocol selection excludes the intended packets, with verification: A bounded permitted test flow appears in the capture without excess unrelated traffic.

Question 696

At Woodcrest Digital Commerce, while reviewing a packet-capture request, the data center fabric team observes: A capture filter produces an empty trace for traffic known to cross the switch. Which recurring validation best prevents this failure mode?

  1. Review management-plane versus transit-plane filters separately
  2. Require policy-domain classification before emergency ACL edits
  3. Retain state and log context together for interface incidents
  4. Validate capture match expressions before incident collection

Explanation

Correct Answer

D:

At Woodcrest Digital Commerce, while reviewing a packet-capture request, use this repeatable control: Validate capture match expressions before incident collection. Its scope is the problem (The capture match, source point or protocol selection excludes the intended packets), not an unrelated network maintenance procedure.

Incorrect Answers

A:

At Woodcrest Digital Commerce, while reviewing a packet-capture request, this option proposes: Review management-plane versus transit-plane filters separately. The alternative focuses on System control-plane filtering was confused with the interface data-plane ACL, not on the stated defect. For this scenario the expected acceptance result would be: A bounded permitted test flow appears in the capture without excess unrelated traffic.

B:

At Woodcrest Digital Commerce, while reviewing a packet-capture request, this option proposes: Require policy-domain classification before emergency ACL edits. This option assumes the other problem (An operator enables a broad system ACL as a quick workaround to an unrelated data-plane incident) is present. The case instead describes A capture filter produces an empty trace for traffic known to cross the switch, for which the causal issue is The capture match, source point or protocol selection excludes the intended packets.

C:

At Woodcrest Digital Commerce, while reviewing a packet-capture request, this option proposes: Retain state and log context together for interface incidents. It tests a different symptom: An engineer cannot correlate a fabric alert to a specific interface. For the observed case, the relevant distinction is The capture match, source point or protocol selection excludes the intended packets, with verification: A bounded permitted test flow appears in the capture without excess unrelated traffic.

Question 697

At Northpoint Municipal Networks, while validating rule match counters, the data center fabric team observes: An engineer puts a management-plane filter on a tenant data port expecting to protect the CPU. Which targeted adjustment best corrects this behavior?

  1. Query the current correct interface counters and reconcile the sampling interval
  2. Disable the unneeded capture and verify normal monitoring configuration remains
  3. Correct the supported logging source, severity and destination mapping
  4. Apply the appropriate supported control-plane filter to protect router-management traffic

Explanation

Correct Answer

D:

At Northpoint Municipal Networks, while validating rule match counters, the targeted correction is: Apply the appropriate supported control-plane filter to protect router-management traffic. The reported symptom is explained by: System control-plane filtering was confused with the interface data-plane ACL. Confirm the change by testing this outcome: Unauthorized management probes are limited while permitted transit traffic remains.

Incorrect Answers

A:

At Northpoint Municipal Networks, while validating rule match counters, this option proposes: Query the current correct interface counters and reconcile the sampling interval. It tests a different symptom: A fabric monitor reports low traffic despite interface counters rising sharply. For the observed case, the relevant distinction is System control-plane filtering was confused with the interface data-plane ACL, with verification: Unauthorized management probes are limited while permitted transit traffic remains.

B:

At Northpoint Municipal Networks, while validating rule match counters, this option proposes: Disable the unneeded capture and verify normal monitoring configuration remains. The option describes a different failure mode: A temporary packet capture remains enabled long after incident closure. It would address The monitoring workflow has no explicit capture expiry or cleanup gate, but here the case reports An engineer puts a management-plane filter on a tenant data port expecting to protect the CPU. The current required evidence is: Unauthorized management probes are limited while permitted transit traffic remains.

C:

At Northpoint Municipal Networks, while validating rule match counters, this option proposes: Correct the supported logging source, severity and destination mapping. That choice would be more relevant when this different symptom occurs: Important SR Linux diagnostic messages disappear after a change to the logging destination. The present scenario instead points to: System control-plane filtering was confused with the interface data-plane ACL. The correct resolution has its own verification outcome: Unauthorized management probes are limited while permitted transit traffic remains.

Question 698

At Northpoint Municipal Networks, while validating rule match counters, the data center fabric team observes: An engineer puts a management-plane filter on a tenant data port expecting to protect the CPU. What observation should be required before this case is closed?

  1. A bounded permitted test flow appears in the capture without excess unrelated traffic
  2. A safe test event arrives at the remote collector with expected device identity
  3. Unauthorized management probes are limited while permitted transit traffic remains
  4. A controlled event appears in the appropriate local or remote log target

Explanation

Correct Answer

C:

At Northpoint Municipal Networks, while validating rule match counters, the decisive validation is: Unauthorized management probes are limited while permitted transit traffic remains. It verifies that the change (Apply the appropriate supported control-plane filter to protect router-management traffic) resolved the mechanism: System control-plane filtering was confused with the interface data-plane ACL.

Incorrect Answers

A:

The capture match, source point or protocol selection excludes the intended packets, but here the case reports An engineer puts a management-plane filter on a tenant data port expecting to protect the CPU. Here, system control-plane filtering was confused with the interface data-plane ACL.

B:

A remote log collector receives no fabric events despite healthy IP reachability. Here, system control-plane filtering was confused with the interface data-plane ACL.

D:

At Northpoint Municipal Networks, while validating rule match counters, this option proposes: A controlled event appears in the appropriate local or remote log target. Although related to Logging, monitoring, filters and ACLs, the proposed change fits another mechanism: The intended log source or severity does not match the configured output destination. The evidence in the current case requires a different result: Unauthorized management probes are limited while permitted transit traffic remains.

Question 699

At Northpoint Municipal Networks, while validating rule match counters, the data center fabric team observes: An engineer puts a management-plane filter on a tenant data port expecting to protect the CPU. What causal finding should the investigation prioritize?

  1. The collection pipeline merges configured and operational paths without identifying their source
  2. The intended log source or severity does not match the configured output destination
  3. The monitoring view reads an incorrect interface or outdated statistics sample
  4. System control-plane filtering was confused with the interface data-plane ACL

Explanation

Correct Answer

D:

At Northpoint Municipal Networks, while validating rule match counters, system control-plane filtering was confused with the interface data-plane ACL. That is the cause of the described failure, and a corrective check should demonstrate: Unauthorized management probes are limited while permitted transit traffic remains.

Incorrect Answers

A:

At Northpoint Municipal Networks, while validating rule match counters, this option proposes: The collection pipeline merges configured and operational paths without identifying their source. That choice would be more relevant when this different symptom occurs: Operators cannot distinguish configuration changes from live operational state in JSON reports. The present scenario instead points to: System control-plane filtering was confused with the interface data-plane ACL. The correct resolution has its own verification outcome: Unauthorized management probes are limited while permitted transit traffic remains.

B:

At Northpoint Municipal Networks, while validating rule match counters, this option proposes: The intended log source or severity does not match the configured output destination. This is a valid category of fabric maintenance for another scenario (Important SR Linux diagnostic messages disappear after a change to the logging destination), not the targeted action for Northpoint Municipal Networks. The distinction is the actual cause: System control-plane filtering was confused with the interface data-plane ACL.

C:

At Northpoint Municipal Networks, while validating rule match counters, this option proposes: The monitoring view reads an incorrect interface or outdated statistics sample. Although related to Logging, monitoring, filters and ACLs, the proposed change fits another mechanism: The monitoring view reads an incorrect interface or outdated statistics sample. The evidence in the current case requires a different result: Unauthorized management probes are limited while permitted transit traffic remains.

Question 700

At Northpoint Municipal Networks, while validating rule match counters, the data center fabric team observes: An engineer puts a management-plane filter on a tenant data port expecting to protect the CPU. What ongoing operational safeguard directly addresses this root issue?

  1. Check remote log delivery independently from network reachability
  2. Apply time-bounded authorization and cleanup checks to traffic captures
  3. Record traffic-path assumptions beside ACL counter tests
  4. Review management-plane versus transit-plane filters separately

Explanation

Correct Answer

D:

At Northpoint Municipal Networks, while validating rule match counters, use this repeatable control: Review management-plane versus transit-plane filters separately. Its scope is the problem (System control-plane filtering was confused with the interface data-plane ACL), not an unrelated network maintenance procedure.

Incorrect Answers

A:

At Northpoint Municipal Networks, while validating rule match counters, this option proposes: Check remote log delivery independently from network reachability. This is a valid category of fabric maintenance for another scenario (A remote log collector receives no fabric events despite healthy IP reachability), not the targeted action for Northpoint Municipal Networks. The distinction is the actual cause: System control-plane filtering was confused with the interface data-plane ACL.

B:

At Northpoint Municipal Networks, while validating rule match counters, this option proposes: Apply time-bounded authorization and cleanup checks to traffic captures. Although related to Logging, monitoring, filters and ACLs, the proposed change fits another mechanism: The monitoring workflow has no explicit capture expiry or cleanup gate. The evidence in the current case requires a different result: Unauthorized management probes are limited while permitted transit traffic remains.

C:

At Northpoint Municipal Networks, while validating rule match counters, this option proposes: Record traffic-path assumptions beside ACL counter tests. Using that approach would investigate An ACL change is committed but counters indicate no matching packets instead. No evidence for that separate failure is supplied here; the reported case is consistent with: System control-plane filtering was confused with the interface data-plane ACL.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests