McAfee-Secured Website

Exam Bundle

Exam Code: AZ-104

Exam Name Microsoft Azure Administrator

Certification Provider: Microsoft

Corresponding Certification: Microsoft Certified: Azure Administrator Associate

Microsoft AZ-104 Bundle $44.99

100% Microsoft AZ-104 Guaranteed Success With Testking Training Materials

Get Real AZ-104 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    AZ-104 Questions & Answers

    606 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual AZ-104 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • AZ-104 Video Course

    AZ-104 Video Course

    132 Video Lectures

    AZ-104 Video Course is developed by Microsoft Professionals to help you pass the AZ-104 exam.

    Description

    This course will improve your knowledge and skills required to pass Microsoft Azure Administrator exam.
  • Study Guide

    AZ-104 Study Guide

    458 PDF Pages

    Developed by industry experts, this 458-page guide spells out in painstaking detail all of the information you need to ace AZ-104 exam.

Microsoft Azure Administrator (AZ-104) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    606 Questions

    $124.99
  • AZ-104 Video Course

    Video Course

    132 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    458 PDF Pages

    $29.99

Microsoft AZ-104 Practice Test 50

Question 490

An Azure VM sends packets along an unexpected virtual-appliance route even though Azure has a system route for the same destination prefix. A matching user-defined route exists. What explains the selection?

  1. For equal destination prefixes, a supported user-defined route can take precedence over Azure system routes.
  2. Azure system routes always override every user-defined route regardless of prefix.
  3. Add an NSG deny rule for a matching destination and it becomes the selected route next hop for that subnet.
  4. Create a second system route using the Azure portal and it always wins over any user-defined route with the same prefix.

Explanation

Correct Answer

A:

Route resolution uses longest-prefix matching and route source precedence. Effective routes show the chosen next hop at the NIC.

Incorrect Answers

B:

That would make route tables ineffective for supported traffic-steering use cases; route selection is more specific.

C:

NSGs filter traffic and cannot choose the route next hop. Route selection is determined by effective route precedence.

D:

User-defined routes can override system routes for the same destination prefix. Azure system routes are not manually created that way.

Question 491

A set of backend VMs has no inbound public IPs, but an external API permits traffic only from a stable public source address. The VMs initiate outbound internet connections. Which Azure subnet networking service best fits?

  1. Associate a NAT Gateway with the subnet and configure the required public IP resources for outbound SNAT.
  2. Place an outbound rule on a public Standard Load Balancer without associating the subnet with NAT Gateway, and it provisions a NAT Gateway automatically.
  3. Add an NSG outbound allow rule for the partner API and it fixes the public source IP used by every VM.
  4. Assign a static private IP to each VM NIC and that internal address will appear as its public outbound source on the internet.

Explanation

Correct Answer

A:

NAT Gateway supplies controlled outbound source IPs for applicable subnet flows without exposing direct inbound connections to every VM.

Incorrect Answers

B:

Load Balancer outbound rules and NAT Gateway are distinct egress services. To use NAT Gateway, create and associate that resource with the subnet.

C:

NSGs determine whether traffic may leave the subnet, not which stable public IP is used for source address translation toward the partner.

D:

A static private address is not a public SNAT address; the subnet still needs an appropriate outbound translation path.

Question 492

An Azure VNet peering succeeds and effective routes show the correct remote CIDR, yet HTTPS from one VM to another is denied by the destination subnet NSG. What conclusion should the operator draw?

  1. Enable the Allow virtual network access peering setting and it overrides a destination subnet NSG deny rule.
  2. Recreate the VNets with different private IP address spaces even though peering already succeeded and the confirmed failure is an NSG deny.
  3. Successful peering and routing do not override NSG packet filters; evaluate the effective destination network security rules.
  4. Add an Allow rule only to the source subnet NSG while leaving the matching destination subnet deny unchanged.

Explanation

Correct Answer

C:

Routing establishes a possible path, while Azure NSGs independently decide whether selected traffic is allowed. Both conditions must be satisfied.

Incorrect Answers

A:

Peering settings can allow routing between VNets, but an applicable destination NSG deny still blocks the HTTPS flow.

B:

Readdressing a valid peering does not cure an explicit security rule that denies the destination flow.

D:

A source-side allow cannot override a deny in a different NSG evaluated on the destination path.

Question 493

Two VNets in supported Azure regions need direct private IP communication. Their ranges do not overlap and no on-premises network is involved. The operator proposes building a VPN tunnel solely between the VNets. What simpler Azure connectivity should be considered?

  1. Configure VNet peering between the two VNets and validate NSGs, routes and any required peering settings.
  2. Create a pair of user-defined routes to each remote VNet CIDR without configuring any peering or gateway connectivity.
  3. Enable gateway transit on both networks despite neither containing a VPN gateway, and it replaces basic VNet peering.
  4. Configure an Azure VPN Gateway in each VNet as a compulsory prerequisite even though supported VNet peering over the backbone is sufficient.

Explanation

Correct Answer

A:

Peering uses Azure network connectivity for private VNet communication without requiring a VPN gateway between the two supported VNets.

Incorrect Answers

B:

UDRs select next hops after a valid network path exists; they cannot themselves establish the missing VNet-to-VNet connection.

C:

Gateway transit is optional and requires an eligible gateway topology. The direct private VNet connectivity here is provided by supported peering.

D:

VNet peering uses Azure backbone connectivity and does not require a VPN gateway pair solely to connect two compatible VNets.

Question 494

A new subnet NSG contains only the default rules. Security assumes internet egress is blocked by default, but test VMs can connect out. Which observation explains this?

  1. Configure an outbound deny for TCP ports 80 and 443 and use it as the sole control for blocking all internet protocols and destination ports.
  2. Default NSG rules can allow outbound internet traffic; add a higher-priority explicit deny or approved egress design as required.
  3. Assign the VirtualNetwork service tag to an outbound deny rule and it will suppress the default Internet allow for non-VNet destinations.
  4. Change only the inbound default DenyAllInBound rule and outbound traffic is denied by the same rule.

Explanation

Correct Answer

B:

Azure NSGs contain default outbound rules including an Internet allow. A custom rule with an earlier priority can tighten egress.

Incorrect Answers

A:

A web-port-only outbound deny could block common HTTP and HTTPS sessions but leaves other protocols and destination ports available. The requested broad egress restriction needs a correctly matched outbound rule or controlled egress architecture.

C:

The VirtualNetwork service tag does not match all internet destinations; the explicit egress restriction must match the intended internet traffic.

D:

Inbound and outbound NSG rule sets are evaluated separately. A custom outbound rule is needed to override the default outbound internet allowance.

Question 495

A Private Link connection to a third-party supported PaaS resource was created but its connection state remains Pending. DNS resolves a private IP, yet data access fails. What additional status must be checked?

  1. Assign Storage Blob Data Contributor to the requesting VM identity while leaving the private endpoint connection in Pending approval.
  2. Verify that the service owner has approved the private endpoint connection and that it is in a usable approved state.
  3. Change private DNS A records repeatedly while leaving the service-side private endpoint connection unapproved.
  4. Grant Network Contributor on the endpoint NIC and the role assignment will change service-owner approval automatically.

Explanation

Correct Answer

B:

Private endpoint provisioning and DNS alone do not guarantee provider-side connection acceptance. The service owner approval workflow can be required.

Incorrect Answers

A:

Authorization does not make a pending Private Link connection usable. The service owner must approve the endpoint connection first.

C:

Correct private DNS is important, but it does not transition a Pending private endpoint connection to Approved.

D:

Azure RBAC over the endpoint does not bypass the separate service-side private endpoint connection approval process.

Question 496

Azure Bastion is deployed in AzureBastionSubnet, but administrative sessions fail after a restrictive NSG is attached to that subnet. The VM private IP is reachable from other resources. What should be inspected?

  1. Increase the Azure Bastion subnet address size alone and a blocking BastionSubnet NSG rule is ignored after resize.
  2. Disable all NSGs in the virtual network rather than inspecting the Bastion subnet and target VM security requirements.
  3. Review required Bastion subnet inbound/outbound NSG rules for the selected Bastion SKU and restore only necessary service traffic.
  4. Allow new inbound RDP and SSH rules on the target VM but leave the BastionSubnet NSG restrictions unexamined.

Explanation

Correct Answer

C:

Bastion requires specific network flows on its dedicated subnet. A blanket deny can break session establishment even when target VMs remain healthy.

Incorrect Answers

A:

Subnet address size and service NSG rules are distinct; insufficient or incorrect BastionSubnet rules can still block connectivity.

B:

Removing all filters is overbroad and can expose workloads. Inspect and repair the necessary Bastion connectivity flows.

D:

Target-VM access rules alone cannot overcome blocked service control/data-plane flows at the dedicated Bastion subnet NSG.

Question 497

A networking team still relies on a legacy NSG flow-logging design to investigate packet decisions. Microsoft documentation identifies platform changes to supported flow log collection. Before updating the design, what should the team do?

  1. Continue depending on existing NSG flow logs indefinitely and defer the migration until after their September 2027 retirement date.
  2. Enable Azure Monitor metric alerts for packet volume and they retain per-flow source, destination, port and action metadata.
  3. Migrate to VNet flow logs but retain overlapping old NSG logging on the same workloads indefinitely without assessing duplicate records and cost.
  4. Verify the current first-party Network Watcher flow-logging product support and migrate to the supported virtual network flow-logging approach where required.

Explanation

Correct Answer

D:

Microsoft has stopped creating new NSG flow logs and plans retirement in September 2027; plan supported virtual network flow logs rather than treating legacy NSG logs as future-ready.

Incorrect Answers

A:

Existing NSG flow logs can be managed during the transition, but the service retires September 30, 2027. Deferring supported VNet flow logging until after retirement risks a telemetry gap.

B:

Aggregate metric alerts do not replace the individual IP flow records needed for analysis and investigation.

C:

Microsoft recommends reviewing overlapping logging because NSG and VNet flow logs can duplicate observations or produce confusing coverage.

Question 498

A firewall appliance pair must distribute many TCP and UDP flows across eligible network virtual appliance backends without writing a separate load-balancing rule for each individual destination port. What feature can help?

  1. Create fixed-port Standard Load Balancer rules for TCP 80 and 443 and use those rules to cover all additional TCP and UDP appliance destination ports.
  2. Use an appropriate Azure Load Balancer HA ports rule for the supported internal load balancing topology.
  3. Enable client-IP session persistence on one TCP load-balancing rule and use that affinity setting to accept every other protocol and port.
  4. Configure an Azure Application Gateway HTTP listener as the common entry point for arbitrary TCP/UDP firewall-appliance sessions.

Explanation

Correct Answer

B:

HA ports can load-balance multiple TCP/UDP flows over a frontend using one rule, commonly for highly available network appliance scenarios.

Incorrect Answers

A:

Port-specific TCP rules match only their configured protocol/ports; they cannot load-balance arbitrary other appliance flows. HA ports matches eligible all-port traffic.

C:

Session persistence chooses a backend for matching sessions, not the protocols or destination ports a narrow load-balancing rule matches.

D:

Application Gateway handles supported Layer-7 HTTP(S) traffic, not the general TCP/UDP all-ports network appliance traffic addressed by a Standard Load Balancer HA ports rule.

Question 499

An operator updates the A record for app.example.net in Azure DNS, but some external resolvers continue returning the former public IP until a timeout. What DNS property best explains the delay?

  1. Reduce the TTL on the new A record and use that new TTL to invalidate copies of the old answer already stored in external recursive resolvers.
  2. The previous record time-to-live permits caching until its expiration, so not all resolvers immediately fetch the new answer.
  3. Publish a CNAME alongside the existing A record at the same hostname as an immediate override for the earlier cached A answer.
  4. Move the Azure DNS zone to another resource group and use the management move to force all external resolvers to forget the original A record.

Explanation

Correct Answer

B:

Recursive resolvers may retain cached responses according to TTL. Verify the authoritative record and account for caching when planning DNS cutovers.

Incorrect Answers

A:

The new TTL applies to subsequent DNS responses; recursive resolvers that cached the previous A record can keep it until its old TTL expires.

C:

DNS normally prohibits a CNAME coexisting with other data records at the same owner name. Adding a conflicting alias does not invalidate resolver caches.

D:

Azure resource-group placement does not affect TTL-based DNS caching by recursive resolvers outside the subscription.

Question 500

An administrator attempts to publish a CNAME for portal.example.com in Azure DNS, but an existing A record already uses the exact same host name. The DNS service rejects the combination. What DNS rule explains it?

  1. Create an alias CNAME at the same hostname without removing its existing A record, and the DNS server allows both record types.
  2. Raise the CNAME TTL above the A record TTL to make the DNS service accept both record sets at the same name.
  3. A CNAME generally cannot coexist with other resource-record types at the same owner name; select the intended mapping and remove the conflict.
  4. Create an Azure DNS TXT record at the CNAME owner name, and it will coexist with the CNAME because TXT is used for verification.

Explanation

Correct Answer

C:

DNS aliases must not share the same record-set owner with conflicting record types. The engineer should choose a valid A/AAAA or CNAME configuration.

Incorrect Answers

A:

A CNAME generally cannot coexist with A or other record sets at the same owner name; resolve the record-type conflict first.

B:

The CNAME exclusivity requirement is structural, not based on TTL values. The conflicting record type must be removed or moved.

D:

The CNAME coexistence restriction includes ordinary TXT records at the same owner name in standards-compliant DNS.