McAfee-Secured Website

Exam Bundle

Exam Code: AZ-104

Exam Name Microsoft Azure Administrator

Certification Provider: Microsoft

Corresponding Certification: Microsoft Certified: Azure Administrator Associate

Microsoft AZ-104 Bundle $44.99

100% Microsoft AZ-104 Guaranteed Success With Testking Training Materials

Get Real AZ-104 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    AZ-104 Questions & Answers

    606 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual AZ-104 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • AZ-104 Video Course

    AZ-104 Video Course

    132 Video Lectures

    AZ-104 Video Course is developed by Microsoft Professionals to help you pass the AZ-104 exam.

    Description

    This course will improve your knowledge and skills required to pass Microsoft Azure Administrator exam.
  • Study Guide

    AZ-104 Study Guide

    458 PDF Pages

    Developed by industry experts, this 458-page guide spells out in painstaking detail all of the information you need to ace AZ-104 exam.

Microsoft Azure Administrator (AZ-104) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    606 Questions

    $124.99
  • AZ-104 Video Course

    Video Course

    132 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    458 PDF Pages

    $29.99

Microsoft AZ-104 Practice Test 14

Question 130

A subnet route table appears correct, but a VM still reaches an unexpected gateway for a destination. Which Azure Network Watcher diagnostic can verify the effective next hop for a VM-to-target address?

  1. Inspect only the route table associated with the subnet and it shows the VM’s final chosen next hop.
  2. Run Network Watcher Next hop for the VM network interface and destination IP.
  3. Review only effective security rules on the VM NIC and infer the active route from the NSG allow decision.
  4. Use Network Watcher IP flow verify alone to report complete next-hop selection.

Explanation

Correct Answer

B:

Next hop can identify the routing target Azure uses for traffic to a specified IP. This supports investigation of UDR versus system or propagated routes.

Incorrect Answers

A:

Configured user-defined routes omit potentially relevant system and propagated routes; the effective Next hop diagnostic evaluates the chosen path for a specified destination.

C:

Effective security rules determine access filtering. They do not report the actual selected routing next hop; Network Watcher Next hop provides that view.

D:

IP flow verify evaluates allow/deny filtering; it is not the diagnostic that reports effective route next hops.

Question 131

Inbound HTTPS is allowed by a subnet NSG, yet one VM NIC has an additional NSG denying the same traffic. The TCP connection fails. What security evaluation explains this?

  1. The VM NIC NSG is ignored whenever its private IP is dynamic.
  2. An outbound HTTPS allow rule on the VM NIC NSG implicitly permits unrelated new inbound HTTPS sessions to that NIC.
  3. The packet must pass the relevant effective NSG filtering at both subnet and NIC; a deny at either layer can block it.
  4. Subnet allow rules always bypass every attached NIC NSG.

Explanation

Correct Answer

C:

Azure evaluates network security controls at applicable attachment points. An allow at the subnet does not override a blocking NIC-level rule.

Incorrect Answers

A:

Private address assignment mode does not disable the NIC NSG. Its effective rules still apply.

B:

NSGs track established return flows, but an outbound allow does not authorize a new inbound connection. Both subnet and NIC inbound checks must permit that session.

D:

A NIC NSG remains an active filtering layer. The traffic is not authorized merely because another layer allows it.

Question 132

A team creates a general-purpose subnet named BastionServices and tries to deploy Azure Bastion into it. Deployment requires the dedicated subnet name defined by the service. What must they change?

  1. Create and size a subnet named AzureBastionSubnet according to the current Bastion SKU requirements.
  2. Use a subnet named AzureBastionSubnet-prod and rely on the prefix match instead of the required exact name.
  3. Create AzureBastionSubnet in a different, peered VNet while deploying Bastion into a VNet without that subnet.
  4. Choose the VNet default subnet if it has sufficient addresses, leaving its name unchanged.

Explanation

Correct Answer

A:

Azure Bastion uses a designated subnet with a prescribed name and supported size. The topology and SKU requirements should be checked before deployment.

Incorrect Answers

B:

Bastion expects the prescribed exact AzureBastionSubnet name; appending a suffix is not equivalent to creating the required dedicated subnet.

C:

The Bastion host requires its dedicated subnet in its own hosting VNet. A similarly named subnet elsewhere does not satisfy deployment.

D:

Address capacity alone does not replace the mandatory Bastion-specific subnet and supported topology requirements.

Question 133

A client VNet has a Storage service endpoint and the storage firewall permits its subnet. An architect assumes the storage hostname will resolve to an IP inside that VNet. What is the correction?

  1. Link a private DNS zone to the client VNet without creating a storage private endpoint, and the service endpoint will allocate a private NIC.
  2. Service endpoints protect subnet-based access to the PaaS public endpoint; a private endpoint is needed for a private IP in the VNet.
  3. Every service endpoint creates a private NIC named after the storage account.
  4. Use the storage account’s RA-GRS redundancy setting to provision a private frontend IP inside each client VNet.

Explanation

Correct Answer

B:

Service endpoint routing still targets the service public endpoint, whereas Private Link creates a VNet private interface. The two features serve different access designs.

Incorrect Answers

A:

Private DNS alone does not provision a private network interface for Storage. A storage private endpoint must be created for private-IP access.

C:

That describes a private endpoint, not the service endpoint feature. The public endpoint remains in use with subnet identity.

D:

RA-GRS governs replication and optional secondary reads; it does not create per-VNet Private Link interfaces.

Question 134

A storage private endpoint exists, but application VMs still resolve the storage account FQDN to its public IP and traffic fails after public access is disabled. Which missing integration should be investigated?

  1. Configure object replication to the storage account’s secondary region and this automatically changes the FQDN to a private IP.
  2. Create the correct privatelink DNS zone but do not link it to the VNet or configure forwarding for the app VM resolver.
  3. Configure the appropriate private DNS zone/link and records or DNS forwarding so the service name resolves to the private endpoint address.
  4. Add the storage account’s public IP to the VM NSG allow list while retaining the service’s disabled public endpoint.

Explanation

Correct Answer

C:

Private Link access requires clients to resolve service hostnames to the private IP where appropriate. A private endpoint alone does not guarantee every resolver is configured.

Incorrect Answers

A:

Replication changes data availability, not a client resolver’s public versus private DNS answer.

B:

An unlinked zone cannot be resolved by the client through Azure-provided DNS. The client resolution path must reach records mapping the storage hostname to the private endpoint.

D:

Allowing outbound public traffic does not undo service-side public access restrictions or cause name resolution to use the private endpoint.

Question 135

A VM NIC cannot connect to a known destination and TCP port. Engineers need to know which NSG rule allows or denies the specific tuple before changing security policy. Which Network Watcher diagnostic helps?

  1. Review the VM’s effective routes alone and a successful route means no NSG rule could block the packet.
  2. Run Connection Monitor and an availability test identifies the exact NSG rule responsible for denying the specified packet tuple.
  3. Use IP flow verify with the VM NIC and source/destination/protocol tuple to identify NSG allow or deny results.
  4. Use Network Watcher Next hop alone as a full NSG rule evaluator.

Explanation

Correct Answer

C:

IP flow verify tests effective NSG decisions for a packet scenario and can identify relevant rule behavior. Routing problems require complementary diagnostics.

Incorrect Answers

A:

A valid route and an NSG allow decision are different checks. Effective routes alone cannot identify which applicable NSG rule denies the specified tuple.

B:

Connection Monitor provides reachability and performance tests. IP flow verify is the targeted diagnostic for a particular NSG allow/deny result and matching rule.

D:

Next hop reports routing information but does not replace IP flow verify for explicit NSG allow/deny diagnosis.

Question 136

An administrator created example.net as a public Azure DNS zone and added correct A records, but internet resolvers still query the old hosting provider. What external domain change is needed?

  1. Update the domain registrar’s authoritative name server delegation to the Azure DNS name servers assigned to the zone.
  2. Add more A records in the new Azure DNS zone while retaining the registrar’s existing old-provider name-server delegation.
  3. Add a new Azure DNS TXT verification record but leave authoritative NS delegation at the old host.
  4. Reduce the TTL of records in the Azure zone without changing registrar delegation.

Explanation

Correct Answer

A:

A DNS zone becomes authoritative for the public domain only when the parent delegation points to its name servers. Records alone in an undelegated zone have no effect for internet resolvers.

Incorrect Answers

B:

Public recursive resolvers still follow the registrar delegation to the old provider, so more records in the undelegated Azure zone will not become authoritative.

C:

TXT verification does not transfer authoritative DNS hosting. Delegation needs to reference the Azure DNS name servers.

D:

A lower TTL cannot cause resolvers to query a DNS zone that the parent domain still does not delegate to.

Question 137

An operator has a public Azure Load Balancer frontend and must forward an approved management port to one specific backend VM rather than distributing it across the pool. Which Load Balancer feature fits?

  1. Configure a controlled inbound NAT rule mapping the frontend port to the chosen backend VM port.
  2. Configure an outbound rule using the management port and the public frontend will accept this inbound session.
  3. Configure a generic load-balancing rule that distributes the management connection randomly to every backend.
  4. Create an additional TCP health probe that marks the chosen VM healthy without any inbound NAT mapping.

Explanation

Correct Answer

A:

An inbound NAT rule maps a selected frontend port to a specified backend target. Security policy must still restrict who can use the management path.

Incorrect Answers

B:

Outbound rules control SNAT for backend-initiated connections; they do not map a selected public frontend inbound port to one VM.

C:

A load-balancing rule is designed for a pool and does not satisfy the need for deterministic mapping to one VM.

D:

Health probes determine backend availability but do not create the required one-to-one public frontend port-forwarding rule.

Question 138

An Azure Standard Load Balancer has a reachable private frontend and a working TCP health probe. VM-A should receive traffic but does not appear in the expected backend pool. VM-B in the same subnet handles requests. What should an administrator inspect first?

  1. Confirm that VM-A NIC IP configuration is associated with the backend pool referenced by the load-balancing rule.
  2. Associate VM-A with a second backend pool on the same Load Balancer while leaving the existing load-balancing rule directed only to the first pool.
  3. Create a separate inbound NAT rule for VM-A and leave the load-balancing rule backend pool unchanged.
  4. Change the existing TCP health probe to point at an Azure Storage account endpoint rather than VM-A.

Explanation

Correct Answer

A:

A backend must be represented by the appropriate backend-pool membership (NIC/IP configuration or supported IP-based membership) to receive flows from that rule; health alone cannot add missing pool membership.

Incorrect Answers

B:

Backend pool membership must match the specific pool targeted by the frontend rule. Adding VM-A to another pool on the same Load Balancer does not route that rule to VM-A.

C:

An inbound NAT rule targets a particular instance for a separate mapping; it does not repair missing pool membership for load-balanced flows.

D:

Probing an unrelated storage service does not establish VM-A readiness or make it part of the intended pool.

Question 139

A team wants Azure VMs added to a particular VNet to automatically register suitable host records in a private DNS zone. Which private DNS link option should be used?

  1. Create a private DNS virtual network link with auto-registration enabled for the appropriate VNet.
  2. Create only a private DNS zone without linking it to the VNet, and automatic registration will run globally.
  3. Deploy an Azure DNS Private Resolver outbound endpoint and it automatically registers every VM hostname in the zone.
  4. Use a private DNS resolution link with registration disabled and it still creates VM records.

Explanation

Correct Answer

A:

Auto-registration links can register supported VM records in the private DNS zone. Resolution-only links do not perform the same record registration.

Incorrect Answers

B:

A private zone alone cannot auto-register VM host records from a VNet that lacks an eligible registration-enabled link.

C:

DNS Private Resolver forwards or receives queries; it does not replace private DNS virtual network link auto-registration of eligible VM records.

D:

Resolution-only links allow querying an existing zone; auto-registration is a distinct option.

Question 140

A web administrator wants requests to /images routed to one pool and /api to another by URL path. They plan to use Azure Load Balancer alone. What limitation should be explained?

  1. Create separate inbound NAT rules for the image and API backend pools while keeping the same HTTP frontend listener.
  2. Azure Load Balancer operates at layer 4; HTTP path-based routing requires an appropriate layer-7 service such as Application Gateway.
  3. Place backends in separate application security groups and the Load Balancer will select them based on the URL path.
  4. Azure Load Balancer can inspect every HTTP URI through a TCP rule without additional components.

Explanation

Correct Answer

B:

Transport-layer balancing does not parse request URLs. A layer-7 reverse proxy or gateway is needed to select backends based on paths.

Incorrect Answers

A:

Layer-4 NAT rules match ports and addresses, not HTTP request paths, so they cannot route /images and /api from one HTTP listener.

C:

ASGs are used to group NICs for NSG filtering, not HTTP URI inspection or application-layer pool selection.

D:

A standard L4 balancing rule does not evaluate HTTP paths; it uses transport and backend health signals.